The effect of surface microtopography of poly(dimethylsiloxane) on protein adsorption, platelet and cell adhesion

Chemical homogeneous poly(dimethylsiloxane) (PDMS) surface with dot-like protrusion pattern was used to investigate the individual effect of surface microtopography on protein adsorption and subsequent biological responses. Fibrinogen (Fg) and fibronectin (Fn) were chosen as model proteins due to their effect on platelet and cell adhesion, respectively. Fg labeled with ¹²⁵I and fluorescein isothiocyanate (FITC) was used to study its adsorption on flat and patterned surfaces. Patterned surface has a 46% increase in the adsorption of Fg when compared with flat surface. However, the surface area of the patterned surface was only 8% larger than that of the flat surface. Therefore, the increase in the surface area was not the only factor responsible for the increase in protein adsorption. Clear fluorescent pattern was visualized on patterned surface, indicating that adsorbed Fg regularly distributed and adsorbed most on the flanks and valleys of the protrusions. Such distribution and local enrichment of Fg presumably caused the specific location of platelets adhered from platelet-rich plasma (PRP) and flowing whole blood (FWB) on patterned surface. Furthermore, the different combination of surface topography and pre-adsorbed Fn could influence the adhesion of L929 cells. The flat surface with pre-adsorbed Fn was the optimum substrate while the virgin patterned surface was the poor substrate in terms of L929 cells spread.     

Modification of polysulfones by click chemistry: Amphiphilic graft copolymers and their protein adsorption and cell adhesion properties

Well‐defined amphiphilic graft copolymer with hydrophobic polysulfone (PSU) backbone and hydrophilic poly(acrylic acid) (PAA) side chains were synthesized and characterized. For this purpose, commercially available PSU was converted to azido‐functionalized polymer (PSU‐N₃) by successive chloromethylation and azidation processes. Independently, poly(tert‐butyl acrylate) (PtBA) with an alkyne‐end‐group is obtained by using suitable initiator in atom transfer radical polymerization (ATRP). Then, this polymer was successfully grafted onto PSU‐N₃ by click chemistry to yield polysulfone‐graft‐poly(tert‐butyl acrylate), (PSU‐g‐PtBA). Finally, amphiphilic polysulfone‐graft‐poly(acrylic acid), (PSU‐g‐PAA), membranes were obtained by hydrolyzing precursor the PSU‐g‐PtBA membranes in trifluoroacetic acid. The final polymer and intermediates at various stages were characterized by ¹H NMR, FTIR, GPC, and SEM analyses. Protein adsorption and eukaryotic and prokaryotic cell adhesion on PSU‐g‐PAA were studied and compared to those of PSU‐g‐PtBA and unmodified PSU. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailored with zwitterions was found having good blood compatibility. In this study, the zwitterionic monomer of sulfobetaine was graft polymerized onto polyurethane (PU) surface in a three-step heterogenous system through the vinyl bonds of acrylic acid (AA) or hydroxyethyl methacrylate (HEMA), which was immobilized with hexamethylene diisocyanate (HDI) beforehand. First, PU was activated with isocyanate groups using HDI as coupling agent. Second, AA or HEMA was introduced through reaction of AA or HEMA with NCO groups bonded on PU surface. Last, zwitterionic monomer of sulfobetain was graft polymerized with vinyl group of AA or HEMA using AIBN as polymerization initiator. The reaction process was monitored with ATR-IR spectra and XPS spectra. Variation of graft yield with temperature and monomer feed concentration was investigated and feasible conditions were optimized. The wettability of films was investigated by water contact angle measurement and water absorbance. Platelet adhesion experiment was conducted as a preliminary test to confirm the improved blood compatibility of PU. The number of platelets adhering to PU decreased greatly comparing with the originals after 1 and 3 h of contact with human plate-rich plasma (PRP).     

Multiarm molecular brushes: effect of the number of arms on the molecular weight polydispersity and surface ordering

Individual molecules of multiarm starlike molecular brushes were visualized by atomic force microscopy. In the studied series of brushes, the number of arms varied from one for a linear chain to four, while the length of the side chains was kept approximately constant. Molecular visualization provided a unique opportunity for independent size characterization of the brush arms separately from that of the entire molecule. In agreement with the Schulz-Flory theory for chain coupling, the polydispersity of the total length was significantly lower than that of the arm length. The variation in polydispersity had an effect on molecular ordering. Lateral compression of the starlike brushes caused a transition from an extended dendritic-like conformation to a compact disklike conformation. In contrast to one-, two-, and three-arm brushes, the four-arm molecules with a lower polydispersity index of 1.04 demonstrated local hexagonal order.     

The effect of thermal annealing on the thermal properties and molecular weight of a segmented polyurethane copolymer

The influence of thermal annealing on molecular weight, microphase mixing, and multiple melting behavior of a segmented block copolyurethane is reported. The material studied contained 55% of hard segment consisting of 4,4'-diphenylmethane diisocyanate and butanediol, and a poly (propylene oxide) diol of molecular weight 2000 as the soft segment. The thermal stability of the materials was influenced greatly by the order-disorder transition, estimated to occur at ca. 191°C. Upon annealing above this temperature, molecular weight increased rapidly as a result of chain branching reactions. Microphase separation increased under these conditions, while the degree of hard segment crystallinity decreased. Annealing below the order-disorder transition temperature resulted in relatively small molecular weight increases for short annealing times, but large increases for annealing times greater than one hour. Glass transition temperature data for these thermal treatments was consistent with upper critical solution temperature behavior and selective solubility by hard segment sequence length according to the Koberstein-Stein hard microdomain model. The critical hard segment sequence for segregation was estimated (for 30 min annealing) to contain ca. 5 diisocyanate residues at 80°C, ca. 8 residues at 185°C, and increased slowly with annealing time. © 1994 John Wiley & Sons, Inc.     

Mechanical properties of rigid polyurethane composites reinforced with surface treated ultrahigh molecular weight polyethylene fibers

The mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE) fibers reinforced rigid polyurethane (PU) composites were studied, and the effects of the fiber surface treatment and the mass fraction were discussed. Chromic acid was used to treat the UHMWPE fibers, and polyurethane composites were prepared with 0.1 to 0.6 wt% as‐received and treated UHMWPE fibers. Attenuated total reflection Fourier transform infrared demonstrated that oxygen‐containing functional groups were efficiently grafted to the fiber surface. The mechanical performance tests of the UHMWPE fibers/PU composites were conducted, and the results revealed that the treated UHMWPE fibers/PU composites had better tensile, compression, and bending properties than as‐received UHMWPE fibers/PU composites. Thermal gravimetric analyzer showed that the thermal stability of the treated fiber composites were improved. The interface bonding of PU composites were investigated by scanning electron microscopy and dynamic mechanical analysis, and the results indicated that the surface modification of UHMWPE fiber could improve the interaction between fiber and PU, which played a positive role in mechanical properties of composites.     

The effect of the molecular weight of polyester on the properties of silane terminated polyurethane sealants

The properties of silane terminated polyurethane sealants produced using polyesters of different molecular weights have been studied. The relationship between the molecular weight of polyester with STP oligomer polarity, degree of swelling, and physicomechanical and adhesive properties of sealants has been established. It is shown that the polarity of oligomer and properties of sealants are reduced with increasing molecular weight of polyester.     

Platelet adhesion and protein adsorption on silicone rubber surface by ozone-induced grafted polymerization with carboxybetaine monomer

Platelet adhesion and protein adsorption on the silicone rubber film grafted with N,N'-dimethyl-N-methacryloyloxyethyl-N-(2-carboxyethyl) ammonium (DMMCA) was studied. The grafting was carried out by means of ozone-induced method and was confirmed by ATR-FTIR and XPS investigations. The grafted films possessed relatively hydrophilic surface revealed by contact angle measurement. The blood compatibility of the grafted film was evaluated in vitro by platelet adhesion in platelet-rich plasma (PRP) and protein absorption in bovine fibrinogen (BFG) using silicone film as the reference. No substantial platelet adhesion was observed for the grafted films incubated in PRP for 60 and 180 min. The protein absorption was also significantly reduced after incubated in bovine fibrinogen for 60 min. Both the results indicated that the blood compatibility of silicone rubber was greatly improved by ozone-induced grafting of carboxybetaine zwitterionic polymer onto its surface.     

Topography-induced cell adhesion to Acr-sP(EO-stat-PO) hydrogels: the role of protein adsorption

Topographic surface patterning of intrinsically non-adhesive P(EO-stat-PO)-based hydrogels can lead to the adhesion and spreading of fibroblasts. Explanations for this unexpected behavior are discussed, particularly with regard to non-specific protein adsorption from the serum-supplemented culture medium. The presence of serum proteins is shown to be essential for adhesion. Adsorption of plasma and ECM proteins (Fibronectin (FN) and Vitronectin (VN)) to the hydrogels is possible. The effect of VN on initial cell adhesion is analyzed in detail. It appears that VN is the main serum component that is crucial for initial cell adhesion to PEG and that surface topography is essential for further, durable adhesion establishment, and spreading.     

The effect of solvent polarity on the molecular surface properties and adhesion of Escherichia coli

The elasticity and molecular surface characteristics of Escherichia coli JM109 were investigated via atomic force microscopy (AFM) in solvents expressing different polarities. The nature of bacterial adhesion and surface characteristics was probed in formamide, water, and methanol, with dielectric constants of 111, 80, and 33, respectively. Solvent polarity affected the elasticity of the bacterium, the conformation of the cell surface biopolymers, the height of the surface biopolymers, and measured adhesion forces between the bacterium and silicon nitride. By applying the Hertz model to force-indentation data, we determined that the Young's modulus was greatest in the least polar solvent, with values of 182 +/- 34.6, 12.8 +/- 0.1, and 0.8 +/- 0.3 MPa in methanol, water, and formamide, respectively. The thickness of the biopolymer brush layer on the bacterial surface was quantified using a steric model, and these values increased as polarity increased, with values of 27, 93, and 257 nm in methanol, water, and formamide, respectively. The latter results suggest that highly polar conditions favor extension of the biopolymer brush layer. Cross-sectional analysis performed on tapping mode images of the bacterial cells in methanol, water, and formamide further supported this hypothesis. The image height values are larger, since the image analysis measures the height of the bacterium and the polymer layer, but the trend with respect to solvent polarity was the same as was obtained from the steric model of the brush length. Measured adhesion forces scaled inversely with solvent polarity, with greatest adhesion observed in the least polar solvent, methanol. The combined conformational changes to the bacterial surface and biopolymer layer result in different presentations of macromolecules to a substrate surface, and therefore affect the adhesion forces between the bacterial molecules and the substrate. These results suggest that polarity of the solvent environment can be manipulated as a design parameter to control or modify the bacterial adhesion process.     

Structural biology of the cell adhesion protein CD2: from molecular recognition to protein folding and design

CD2 (cluster of differentiation 2) is a cell adhesion molecule expressed on T cells and is recognized as a target for CD48 (rats) and CD58 (humans). Tremendous progress has been achieved in understanding the function of CD2, the mechanism of molecular recognition and protein folding, thus, leading towards the use of this protein as a scaffold for protein design. CD2 has been shown to set quantitative thresholds in T cell activation both in vivo and in vitro. Further, intracellular CD2 signaling pathways and networks are being discovered by the identification of several cytosolic tail binding proteins. In addition, a new method for directly measuring heterophilic adhesion has been developed. The functional "hot spot" for the adhesion surface of CD2 and CD58 has been dissected. Detailed NMR studies reveal that rat CD2 weakly self-associates to form a homodimeric structure in solution. Dynamic interaction of CD2 with the GYF and SH3 domains has been investigated. CD2 has been shown to form fibrils in the presence of 2,2,2-trifluoroethanol (TFE) and at low pH. Furthermore, kinetic studies have been completed to monitor the effect of surface hydrophobic residues and intramolecular bridges on the folding pathways of CD2. Our lab has de novo designed single calcium-binding sites into domain 1 of rat CD2 (CD2-D1) with strong metal selectivity. In addition, the EF-hand motifs have been grafted into CD2 to understand the site-specific calcium-binding affinity of calmodulin and calcium-dependent cell adhesion.     

Modeling molecular weight distribution of comb-branched graft copolymers

Grafting one type polymer onto a different polymer type may yield a comb-branched copolymer. The branching density has a significant effect on its overall molecular weight distribution. A general model is derived to describe the bivariate distribution of molecular weight and branching density for such comb copolymers. The model is applicable for various grafting mechanisms provided the side chains are randomly grafted onto the backbone. The determining parameters are the molecular weight distributions of backbone and side chains, and the branching density. Analytical expressions are obtained for the cases of the side chains having uniform and Schulz–Zimm distributions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 705–714, 1998     

Protein adsorption and cell adhesion on RGD-functionalized silicon substrate surfaces

A method was developed to modify silicon surfaces with good protein resistance and specific cell attachment. A silicon surface was initially deposited using a block copolymer of N-vinylpyrrolidone (NVP) and 2-hydroxyethyl methacrylate (HEMA) (PVP-b-PHEMA) film through surface-initiated atom transfer radical polymerization and then further immobilized using a short arginine-glycine-aspartate (RGD) peptide. Our results demonstrate that the RGD-modified surfaces (Si-RGD) can suppress non-specific adsorption of proteins and induce the adhesion of L929 cells. The Si-RGD surface exhibited higher cell proliferation rates than the unmodified silicon surface. This research established a simple method for the fabrication of dual-functional silicon surface that combines antifouling and cell attachment promotion.     

Effect of chain density and conformation on protein adsorption at PEG-grafted polyurethane surfaces

Polyurethanes were modified using monobenzyloxy polyethylene glycol (BPEG) which possesses a bulky hydrophobic benzyloxy group at one end and a hydroxyl group at the other end as a preconstructed BPEG layer, and poly(ethylene glycol) (PEG) and monomethoxyl poly(ethylene glycol) (MPEG) with various chain lengths as fillers. Our objective was to investigate the effect of PEG graft density and conformation on protein adsorption at PEGlated surface. The graft density was estimated by a chemical titration method. The combination of ATR-FTIR, AFM and titration results provide evidences that the graft density can be increased by backfilling PEG or MPEG to a BPEG layer. However, fibrinogen and albumin adsorption significantly increased on all surfaces after PEG or MPEG backfilling. We conclude that the conformation of hydrophobic benzyloxy end groups of the BPEG layer plays a key role. The benzyloxy end groups of preconstructed PEG chains stretch to the surface after PEG backfilling, which possibly accounts for the observed increase in protein adsorption. The BPEG conformation change after backfilling with PEG or MPEG was also suggested by contact angles. Additionally, protein adsorption was slightly influenced by the length of filler, suggesting a change in surface morphology.     

Exploring the effect of aplidin on low molecular weight protein tyrosine phosphatase by molecular docking and molecular dynamic simulation study

The low molecular weight protein tyrosine phosphatase (LMW-PTP) could regulate many signaling pathways, and it had drawn attention as a potential target for cancer. As previous report has indicated that the aplidin could inhibit the LMW-PTP, and thus, the relevant cancer caused by the abnormal regulation of the LMW-PTP could be remission. However, the molecular mechanism of inhibition of the LMW-PTP by the aplidin had not been fully understood. In this study, various computational approaches, namely molecular docking, MDs and post-dynamic analyses were utilized to explore the effect of the aplidin on the LMW-PTP. The results suggested that the intramolecular interactions of the residues in the two sides of the active site (Ser43-Ala55 and Pro121-Asn134) and the P-loop region (Leu13-Ser19) in the LMW-PTP was disturbed owing to the aplidin, meanwhile, the π-π interaction between Tyr131 and Tyr132 might be broken. The Asn15 might be the key residue to break the residues interactions. In a word, this study may provide more information for understanding the effect of inhibition of the aplidin on the LMW-PTP.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Poly(vinylpyrrolidone-b-styrene) block copolymers tethered surfaces for protein adsorption and cell adhesion regulation

Poly(vinylpyrrolidone-b-styrene) (PVP-b-PS) diblock copolymers tethered to glass surfaces were prepared, and the effects on protein adsorption and cellular behavior to the glass and the modified glass surfaces investigated. The PVP-b-PS grafting process was confirmed by water contact angle and XPS measurements. The results obtained for the water contact angles suggest that there are two phases that coexist on the PVP-b-PS block copolymer tethered surface, under aqueous conditions. Although the PVP-b-PS surface possessed, to some extent, a protein resistant property, following introduction of the PS segment to the end of tethered PVP, both fibrinogen and lysozyme adsorption were increased significantly. The PVP-b-PS modified surface, based on Western-blot analysis, appeared to have the greatest amount of surface bound vitronectin, however the conformation of the adsorbed vitronectin may have subsequently been affected by the surface tethered copolymer as was suggested by cell culture results. From these results, we proposed that protein adsorption and cell adhesion can be regulated by tuning the chemical compositions of diblock copolymers tethered to surfaces.     

Control of adhesion and surface forces via potential-dependent adsorption of pyridine

The orientation and extent of adsorption of pyridine on a gold electrode is known to depend on applied potential and is well characterized. By use of the electrochemical surface forces apparatus, we measured the potential dependence of the double-layer interactions and adhesive forces between a gold electrode and a mica surface for different pyridine concentrations. We observed that, unlike mica-mica interactions, the gold-mica interactions were strongly affected by the presence of small concentrations of pyridine. We are able to reach high negative surface potentials (as determined by applying Derjaguin-Landau-Verway-Overbeek theory to our force measurements), which is similar to what is observed in the absence of pyridine. This demonstrates the electronic nature of the forces measured and shows that pyridine does not displace potential-determining ions on the surface. At positive potentials, where the interaction between gold and mica is attractive, pull-off measurements are a strong function of applied potential. The major effect of the presence of pyridine is on the observed shift in the potential of zero force (PZF), moving it to more negative potentials. This effect is caused by the strong dipole of the pyridine molecule. When the applied potential is cast as a deviation from the PZF, the effect of pyridine is to reduce adhesion between gold and mica. We modeled the potential-dependent adhesion of this system using an electrocapillary framework developed previously, and in doing so, we establish the relationship between the gold-liquid and gold-mica surface energies. In addition, we show that pyridine adsorption affects the capacitance of the gold-mica interface.     

Control of protein adsorption: molecular level structural and spatial variables

The adsorption of fibrinogen (Fb) and bovine serum albumin onto polycrystalline Au coated with HS(CH2)3O(CH2CH2O)5CH3 was determined by surface plasmon resonance from bare Au (0% coverage) to the complete ( approximately 100% coverage) self-assembled monolayer (SAM). Both proteins exhibit similar adsorption curves with common onset ( approximately 60% coverage) and range ( approximately 60% to 80% coverage) of minimal protein adsorption. Reflection-absorption infrared spectroscopic data show that widespread order is not present in the films over this range of coverage, indicating loosely packed, bound oligomers that are uniformly distributed and fully screen the underlying substrate. On the basis of our data, we propose a mechanism of protein rejection by oligo(ethylene oxide) (OEO)-modified surfaces in terms of changes in free energy (DeltaGsystem; system = protein + surface) due to oligomer conformational constriction over an area greater than the contact area. Minimal protein adsorption corresponds to the maximum DeltaGsystem for a given compression. This controlled study of protein adsorption provides insights into the molecular level understanding of protein adsorption unavailable from previous polymer and comparative SAM studies.