Indirect Kinetic–Spectrophotometric Determination of Resorcinol, Catechol, and Hydroquinone

A rapid, simple, and sensitive method for the determination of trace amounts of resorcinol, catechol, and hydroquinone in aqueous media has been proposed. The method is based on their reaction with nitrite. The excess nitrite is then determined by a kinetic method based on its reaction with Neutral Red. The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance at 530 nm by a fixed time method. Resorcinol, catechol, and hydroquinone could be determined by the proposed method in the ranges of 0.1–2.0 mg/mL, 0.25–2.0 mg/mL and 0.1–3.0 mg/mL, respectively. The method was applied to the determination of resorcinol and catechol in pharmaceutical formulations with satisfactory results.     

Extractive Spectrophotometric Determination of Fluconazole by Ion-pair Complex Formation with Bromocresol Green

An extraction-spectrophotometric method for the determination of trace amounts of fluconazole was described. Fluconazole was effectively extracted as a 1 ： 1 ion-pair complex with bromocresole green （BCG） at pH 3.0 into chloroform, followed by spectrophotometric determination at 420 nm. Beer＇s law was obeyed over the range of 4-50 μg.mL^-1 of fluconazole with a detection limit of 3.7 μg.mL^-1 . The method is simple, rapid and sensitive. The procedure was applied to the determination of fluconazole in pharmaceutical preparations as well as its recovery from a blood serum sample.     

Flow-Injection Extraction–Photometric Trace Determination of Phosphate and Silicate Ions

As an extension of the method for extraction preconcentration in flow analysis including the extraction–chromatographic recovery of analytes and the chromatomembrane separation of the extract from the aqueous phase that was proposed previously, a procedure was developed for the flow-injection extraction–photometric trace determination of phosphate and silicate ions with the use of a 1% solution of tri-n-octylamine in chloroform as the extractant. Detection limits are 5 g/L for phosphate ions and 20 g/L for silicate ions.     

Determination of Ultra-Trace Platinum,Palladium, Ruthenium,Rhodium, and Iridium in Rocks and Minerals by Inductively Coupled–Plasma Mass Spectrometry Following Nickel Sulfide Fire Assay Preconcentration and Open Mixed Acid Digestion

Platinum (Pt), palladium (Pd), ruthenium (Ru), rhodium (Rh), iridium (Ir), and osmiun (Os) are platinum-group elements with similar physic-chemical properties, and have important applications in geochemistry and environmental chemistry. However, due to their low abundance and inhomogeneous distribution in natural ores as well as the nugget effect, the accurate determination of the platinum-group elements has been a challenge for geological analysis. In this work, self-prepared and purified sodium carbonate (NiCO₃) instead of commercial nickel oxide (NiO) was used as the fire assay collector in order to greatly reduce the reagent blank and method detection limits. In addition, the fuming time of HClO₄ was strictly controlled at 10?min and a high sensitive method was developed for the simultaneous determination of ultra-trace Pt, Pd, Ru, Rh, and Ir in minerals by inductively coupled plasma-mass spectrometry (ICP-MS) following preconcentration with the nickel sulfide fire assay. Under the optimized conditions, the linear ranges of Pt, Pd, Ru, Rh, and Ir were between 0 and 100?ng mL^?1, with correlation coefficients exceeding 0.9997. The detection limits were 0.015, 0.056, 0.014, 0.004, 0.012?ng mL^?1 (for 10?g sample) for Pt, Pd, Ru, Rh and Ir, respectively. The developed method was successfully applied to analyze Chinese Certified Reference Materials (CRMs) GBW07288, GBW07289, GBW07290, GBW07291, GBW07292, GBW07293, GBW07294, GBW07101, GBW07102 and GBW07201 and the determined values were in good agreement with the certified values. The relative standard deviations (n?=?5) of Pt, Pd, Ru, Rh and Ir were between 3.42% and 6.87% for the determination of GBW07291.     

Development and Validation of Spectrophotometric Methods for the Determination of Cefetamet in Pharmaceutical Dosage Forms

Two simple and sensitive spectrophotometric methods for the determination of cefetamet in either pure form or in its pharmaceutical formulations were described. The method Ⅰ is based on the interaction of 3-methylbenzo[d]- thiazolin-2-one hydrazone （MBTH） with cefetamet in the presence of freshly prepared ferric chloride in a neutral medium. The resulting blue colored product has λmax at 628 nm. The method Ⅱ describes the reduction of ferric ion by the drug to ferrous ion followed by a complex formation reaction with 1,10-phenanthroline （1,10-phen） to form an orange red colored chromogen exhibiting 2max at 510 nm. The products are stable for more than 5 and 8 h respectively. Common excipients used as additives in pharmaceutical preparations do not interfere in the proposed methods. Both methods are highly reproducible and have been applied to a wide variety of pharmaceutical preparations and the results are comparable with those of official methods.     

Spectrophotometric Determination of Copper in Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of copper in waste water is described. The procedure is based on the formation of an ion-pair between tetrabutylammonium and the tetrathiocyanatocuprate(II) anion. This ion-pair is extracted with chloroform, and the absorbance of the organic phase is measured at 485nm. Concentrations of copper 0.4mg L^–1 can be detected with a linear application range of between 0.5 and 25mg L^–1, a relative standard deviation of 2.3% (0.8mg L^–1, n=10) and a sampling frequency of 30h^–1. Under the proposed working conditions, only Ni(II) and Pd(II) interfere at molar ratios Ni(II)/Cu(II) 50 and Pd(II)/Cu(II) 100.     

Highly Sensitive Determination of Traces of Co(II) in Pharmaceutical and Urine Samples Using Kinetic–Spectrophotometric Method

Abstract

A high sensitive, accurate and simple kinetic method has been developed for determination of trace of Co(II) ions, based on its strongly catalytic effect in the reaction oxidation of disodium-6-hydroxy-5-[(4-sulfophenyl)azo]-2-naphtalenesulfonic acid (artificial color, Sunset Yellow FCF, E110 in text selected as SY) by hydrogen peroxide in borate buffer at pH of 9.5, by monitoring the rate of disappearance of SY. Reaction rate was monitored spectrophotometrically, at λ_max of the SY at 478.4 nm. The optimum operating conditions regarding reagents concentration and temperature were established. The tangent method was adopted for constructing the calibration curve, which was found to be linear over the concentration range 1.18–17.67 ng ml^?1 and 17.67–58.90 ng ml^?1 of Co(II). The limit of detection (3σ) is 0.15 ng ml^?1, and limit of quantification (10σ) is 0.5 ng ml^?1. The effects of the other ions on the reaction rate were determined for an assessment of the selectivity of the method. The developed kinetic procedure was successfully applied for the determination of Co(II) in pharmaceutical and urine samples. The unique features of this procedure are that the determination can be performed at room temperature, and the analysis time is short. The newly developed method is high sensitive, simple, inexpensive and efficient for use in the analysis of a large number of samples.     

LC–MS–MS Determination of Rotenone, Deguelin, and Rotenolone in Human Serum

For the first time we report a rapid and sensitive LC–MS–MS method for quantification of rotenone, deguelin, and rotenolone in human serum. The analytical procedure involves extraction with ethyl acetate without further clean-up. The active ingredients were separated on a C₈ reversed-phase column by isocratic elution. Eleven simultaneous transitions of precursor ions were monitored. Excellent selectivity and sensitivity enables quantification and identification of low levels of rotenoids (LOD 2 ng mL^?1, LOQ 5 ng mL^?1) in human serum.     

UV–Second Derivative Spectrophotometric and Colorimetric Methods for the Determination,Validation and Thermogravimetric Analysis of New Oral Antidiabetic Pioglitazone in Pure and Pharmaceutical Preparations

Abstract

Three rapid, sensitive, and simple spectrophotometric methods have been developed for the determination of pioglitazone in pure and pharmaceutical preparations.

For the first method, UV-spectrophotometry, standard solutions were measured at 270.2 nm. The first method was linear from 5.0–20.0 µgmL^?1. The linearity was found to be 5.0–20.0 µgmL^?1. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 272.0 and 287.4 nm were measured in the second order derivative-spectra of standard solutions. Calibration curves were constructed by plotting d² A/dλ² values against concentrations, 2.0–12.0 µgmL^?1 of pioglitazone standards in acetonitrile. The detection limits of pioglitazone were 0.10 and 0.16 µgmL^?1 for UV and derivative spectrophotometric methods, respectively. The third method was based on the formation of an ion association complex with bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), and bromothymol blue (BTB). The assay was linear over the concentration range of 20.0–100.0 µgmL^?1 for BCG, 10.0–100.0 µgmL^?1 for BCP, 20.0–120.0 µgmL^?1 for BPB, and 10.0–100.0 µgmL^?1 for BTB. The detection limits of pioglitazone was found to be 0.14 µg mL^?1 for BCG, 0.32 for BCP, 1.24 µgmL^?1 for BPB, and 0.22 µgmL^?1 for BTB. The thermal analysis of the pioglitazone was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy change of pioglitazone was found to be 85.16 J/g. The proposed methods were validated according to the ICH guidelines (1996) with respect to specificity, linearity, limits of detection and quantification, accuracy, precision, and robustness. The results demonstrated that the procedure is accurate, precise, specific, and reproducible (percent relative standard deviation <2%), while being simple and less time consuming. The three proposed methods have been successfully applied to the assay of pioglitazone in pure and in pharmaceutical preparations. The results compared with those obtained by an ultraviolet spectrophotometric method using t and F tests.     

Study on the Application of Gibberellin for the Spectrophotometric Determination of Arsenic,Phosphorus,Silicon and Germanium

SupportedbyNaturalScienceFoundationforInstitutionsofHigherLearningofAnhui.mcnoGi~driwasfoundtobeastiInulantforplangIowthinl926.wthwaswidefyedinagriuled~andmedtalSCenee.InndmppeadVanCeSonthedeVlOPmenofgib~havbeenInadIl].HoweVerthereisno~onhaaPPljcatitOanalghtalcheInistIyuPtonow.The~formulaof~llinisasfollows-Becauseofthe~ketoneinnim~e,bellinpoSSeSSeSatmp.ShenNdsetal.l'edghammoniUInInO~forthe~etricedonofgib~edinSPtalustothinkthatsom~lyacidsSUchasInol~acidsofboc,PhOSPhOnJS,sili…     

Stability-Indicating Liquid Chromatography–Spectrophotometric UV Method for the Simultaneous Determination of Marbofloxacin,Dexamethasone and Clotrimazole in a Liquid Pharmaceutical Dosage Form

A novel, simple and reliable reversed-phase liquid chromatography (LC)–spectrophotometric UV stability-indicating method was developed and validated for the simultaneous assay of marbofloxacin, clotrimazole and dexamethasone acetate in the presence of their impurities and degradation products in a pharmaceutical formulation for veterinary use. A C18 (75 × 4.6 mm, 4 µm) column was used with an acetonitrile–ammonium acetate mixture as mobile phase delivered with gradient elution. A diode-array detection was used in the 200–400 nm range and the detection wavelength was set at 260 nm. Validation carried out on the pharmaceutical dosage form, according to Veterinary International Conference on Harmonization guidelines, demonstrated excellent specificity, linearity, precision, accuracy and robustness. Excellent specificity with respect to vehicle and degradation products obtained after forced degradation (i.e., oxidation, acid, alkaline and thermal degradation) was demonstrated. As for linearity, the LC–UV assay method is applicable in the 0.180–0.420 mg mL^?1 concentration range for marbofloxacin (r ² = 0.99), 0.060–0.140 mg mL^?1 for dexamethasone acetate (r ² = 0.97) and 0.600–1.400 mg mL^?1 for clotrimazole (r ² = 0.98). Very good repeatability (RSD < 0.8 %) and inter-day precision (RSD < 2.5 %) were observed for all analytes. Accuracy was in the 93–104 %, 98–111 % and 99–108 % confidence interval (95 %) for marbofloxacin, dexamethasone acetate and clotrimazole, respectively. The variations (±20 %) of mobile phase flow rate and pH, and oven column temperature did not exhibit an impact on the analyte content accuracy, demonstrating the robustness of the method. The LC–UV method here developed and validated may be used routinely for quality control.     

Stability-Indicating Liquid Chromatography–Spectrophotometric UV Method for the Simultaneous Determination of Marbofloxacin,Dexamethasone and Clotrimazole in a Liquid Pharmaceutical Dosage Form

A novel, simple and reliable reversed-phase liquid chromatography (LC)–spectrophotometric UV stability-indicating method was developed and validated for the simultaneous assay of marbofloxacin, clotrimazole and dexamethasone acetate in the presence of their impurities and degradation products in a pharmaceutical formulation for veterinary use. A C18 (75 × 4.6 mm, 4 µm) column was used with an acetonitrile–ammonium acetate mixture as mobile phase delivered with gradient elution. A diode-array detection was used in the 200–400 nm range and the detection wavelength was set at 260 nm. Validation carried out on the pharmaceutical dosage form, according to Veterinary International Conference on Harmonization guidelines, demonstrated excellent specificity, linearity, precision, accuracy and robustness. Excellent specificity with respect to vehicle and degradation products obtained after forced degradation (i.e., oxidation, acid, alkaline and thermal degradation) was demonstrated. As for linearity, the LC–UV assay method is applicable in the 0.180–0.420 mg mL⁻¹ concentration range for marbofloxacin (r ² = 0.99), 0.060–0.140 mg mL⁻¹ for dexamethasone acetate (r ² = 0.97) and 0.600–1.400 mg mL⁻¹ for clotrimazole (r ² = 0.98). Very good repeatability (RSD < 0.8 %) and inter-day precision (RSD < 2.5 %) were observed for all analytes. Accuracy was in the 93–104 %, 98–111 % and 99–108 % confidence interval (95 %) for marbofloxacin, dexamethasone acetate and clotrimazole, respectively. The variations (±20 %) of mobile phase flow rate and pH, and oven column temperature did not exhibit an impact on the analyte content accuracy, demonstrating the robustness of the method. The LC–UV method here developed and validated may be used routinely for quality control.

     

Determination of Rare Earth Elements in Garnet Minerals,Geological Materials by Inductively Coupled Plasma–Atomic Emission Spectral and Mass Spectral Analysis

Abstract

The performance of inductively coupled plasma–atomic emission spectrometry (ICP‐AES) for the determination of 14 lanthanides and Yttrium was evaluated by comparison with inductively coupled plasma–mass spectral (ICP‐MS) analysis. The geochemical reference samples (GRS), DNC‐1(diabase), AGV‐1(andesite), Sy‐2(syenite), MRG‐1(gabbro), AN‐G(anorthosite), AC‐E(granite), and MAG‐1(marine mud) were chosen as test materials and analyzed for checking the precision and reproducibility of the methods. The mineral garnet is separated from the black sands of the southwest coast of India, and the combined cation exchange–ICP method of AES analysis and MS analysis were carried out for the determination of rare earth elements. Both techniques are within the requirements needed for garnet minerals. The determination of rare‐earth elements in these minerals, which contain other elements as major contribution and trace distribution of rare‐earth elements, shows that ICP applied under the proper working condition lives up to the expectations. Major element analysis gives the formula of garnet of Manavalakurichi (MK) as (FeCaMg)_2.79Al_2.07Si_3.05O₁₂ approximated to Fe₃Al₂Si₃O₁₂, hence of almandine-type garnet. The enrichment of heavy lanthanides compared to the light lanthanides indicates that these lanthanides occupy the coordinaton site of Fe²⁺ by replacement. Both techniques are excellent in determining the very low concentration of lanthanides in geological materials, specifically garnet.     

Flow-injection Determination of Cysteine,N-Acetyl Cysteine and Glutathione in Pharmaceuticals via Potassium Ferricyanide-Fe(Ⅲ) Spectrophotometric System

A simple flow injection spectrophotometric method is reported for the determination of cysteine,N-acetyl cysteine and glutathione based on the reduction of Fe(Ⅲ)/ferricyanide,the in situ reduced ions are reacted with unreduced portion of ferricyanide/Fe(Ⅲ) to form soluble Prussian blue,which is monitored at 735 nm.The calibration graphs are linear in the concentration ranges of(1―100)×10-6 mol/L for cysteine and N-acetyl cysteine,and(1―50)×10-6 mol/L for glutathione.The relative standard deviations of 1.8%,2.5% and 1.9% were found for eleven replicate analyses of 5×10-6 mol/L cysteine,N-acetyl cysteine and glutathione.The limits of detection(3σ blank) at 5×10-7 mol/L for cysteine,and 3×10-7 mol/L for N-acetyl cysteine and glutathione were obtained.The proposed method allowed 60 injections/h.The effects of common substances present in pharmaceuticals and human physiological fluids were examined.The method was applied to determining cysteine in pharmaceutical formulations with the recoveries in a range of 97% to 106% and the results obtained are agreed well with labeled values.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

LC–MS–MS Analysis of Mirtazapine in Plasma, and Determination of Pharmacokinetic Data for Rats

A sensitive LC–MS–MS method with electrospray ionization has been developed for analysis of mirtazapine in rat plasma. After addition of diazepam as internal standard, liquid–liquid extraction was used to produce a protein-free extract. Chromatographic separation was achieved on a 150 × 4.6 mm, 5 μm particle, ODS column with 84:16 (v/v) methanol–water containing 0.1% ammonium acetate and 0.01% glacial acetic acid as mobile phase. LC–MS–MS was performed in selected-ion-monitoring (SIM) mode using target fragment ions m/z 195.09 for mirtazapine and m/z 192.80 for the IS. Calibration plots were linear over the range of 0.516–618.8 ng mL^?1. The lower limit of quantification was 0.516 ng mL^?1. Intra-day and inter-day precision were better than 12.6 and 8.8%, respectively. Mean recovery of mirtazapine from plasma was in the range 87.41–90.06%; average recovery was 88.40% (RSD 3.95%). Significant gender differences between mirtazapine pharmacokinetic data were observed in this study.     

Thin Layer Chromatographic and “In Situ” Spectrophotometric Determination of Products in Solid-Solid Thermal Reaction

Abstract

A method coupling thin layer chromatography and direct spectrophotometry is outlined. The visible spectra of the separated species were obtained by scanning, at constant intervals of wavelenght, the chromatographic plates in the reflectance mode. The method is applied to the determination of unknown products obtained in thermal solid-solid reactions between [Co(bipy)₂(en)]Cl₃ and NH₄Cl.     

Determination of Polycyclic Aromatic Hydrocarbons in Soils and Bottom Sediments by Gas Chromatography–Mass Spectrometry with QuEChERS Sample Preparation

Journal of Analytical Chemistry - The work is dedicated to the determination of polyaromatic hydrocarbons (PAHs) in soils and bottom sediments by gas chromatography–mass spectrometry using...     

Determination of Trace Amounts of Vanadium by Kinetic-Catalytic Spectrophotometric Methods

Kinetic-catalytic spectrophotometric methods were proposed for the determination of trace amounts of vanadium element as vanadium（Ⅳ） and/or V（Ⅴ） ions. The vanadium（Ⅳ） as VO^2＋ ion and/or vanadium（Ⅴ） as VO3^- ion showed a catalytic effect on the kinetic reactions between a color reagent such as methylthymol blue （MTB） or SPADNS and bromate in acidic media. The rate of decrease in the absorbance of the reagent MTB at 440 nm or SPADNS at 510 nm was proportional to concentration of V（Ⅳ） and/or V（Ⅴ） ions in the solution. The linear ranges for determination of vanadium were obtained in the range of 1.0-150 and 5.0-100.0 μg/L by the fixed-time and slope methods, respectively, with using MTB as reagent. In the presence of SPADNS as reagent, the calibration curves were made in the amplitude 1.0-200.0 and 5.0-150 μg/L of vanadium ion by the fixed-time and slope methods, respectively. Using fixed-time method, the limits of detection were obtained to be 0.5 and 0.7 μg/L of vanadium in the presence of MTB and SPADNS as reagents, respectively. Detection limits of vanadium by slope method and reagents of SPADNS and MTB were obtained to be 3.5 and 3.8 μg/L of vanadium, respectively. The proposed methods were applied successfully to determination of vanadium in synthetic and real samples.