Selective oxidation of alcohols over Si<Subscript>3</Subscript>N<Subscript>4</Subscript>-supported silver catalysts

Silver-containing catalysts supported on ceramic silicon nitrides and modified with Zr or Al are considered. The catalytic activities of the catalysts in the dehydrogenation and oxidative dehydrogenation of ethanol into acetaldehyde are compared. The introduction of oxygen into the reaction mixture decreases the temperature of 100% ethanol conversion to 270°C and increases the acetaldehyde selectivity to 95% for all of the catalysts. According to temperature-programmed reduction data, the simultaneous presence of Fe and Ag on the catalyst surface enhances the activity of the supported catalysts. It is hypothesized that the Ag/Fe interface plays the key role in the formation of active sites on the catalyst surface.     

Effect of the composition and method of preparation of iron-containing and cobalt-containing catalysts on the combined reduction of NO and N<Subscript>2</Subscript>O by hydrocarbons

Binary iron-containing and cobalt-containing catalysts derived from the hydrogen form of Pentasil, zirconium dioxide, and binary supports (ZrO₂ + zeolite) display significant activity in the combined reduction of nitrous oxide and nitric oxide by C₁ and C₃-C₄ alkanes, including conditions for the selective catalytic reduction of NO + N₂O. The activity of the catalyst in the conversion of NO and N₂O depends on the method of preparation of the binary composites and the amount of the cobalt and iron components.     

Influence of the composition of carriers based on ZrO<Subscript>2</Subscript> and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> on the properties of cobalt-containing catalysts on the selective reduction of NO with methane

A series of cobalt-containing granulated and structured catalysts based on zirconium and aluminum oxides has been studied. The optimum composition of binary oxide samples (80% ZrO₂ − 20% Al₂O₃) for the selective reduction of nitrogen monoxide with methane (84% conversion of NO achieved at 320 °C) has been determined. The activity of the structured catalysts depends on both the composition of the secondary carrier (ZrO₂, Al₂O₃, and their mixture) and on the nature of the skeleton of the cellular structure (cordierite, kaolin-aerosil). __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 237–241, July–August, 2007.     

Adsorption of NO,NH<Subscript>3</Subscript> and H<Subscript>2</Subscript>O on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The adsorption of small molecules NO, NH₃ and H₂O on V₂O₅/TiO₂ catalysts is studied with the semiempirical SCF MO method MSINDO as pre-stage for the selective catalytic reduction of NO. The mixed catalyst is represented by hydrogen-terminated cluster models. The local arrangement of the cluster atoms is in accordance with available experimental information. Partial relaxation of cluster atoms near the adsorption sites is taken into account. Calculated adsorption energies are compared with experimental literature data. Rapid convergence of computed properties with cluster size is observed. A possible reaction mechanism for the catalytic reduction of NO with NH₃ and O₂ is outlined.     

Synthesis characterization and catalytic evaluation of Ni/ZrO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> aerogels catalysts

The Ni/ZrO₂/SiO₂ aerogels catalysts were synthesized via three different routes: (i) impregnation ZrO₂–SiO₂ composite aerogels with a aqueous solution of Ni(NO₃)₂, (ii) impregnation SiO₂ aerogels with a mixed aqueous solution of Ni(NO₃)₂ and ZrO(NO₃)₂ · 2H₂O, (iii) one-pot sol–gel procedure from precursors Ni(NO₃)₂/ZrO(NO₃)₂ · 2H₂O/Si(OC₂H₅)₄. These catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), ammonia temperature-programmed desorption (NH₃-TPD), N₂ adsorption–desorption isotherms and Fourier transform infrared (FT-IR). The Liquid-phase hydrogenation of maleic anhydride (MA) was performed over these catalysts. The results revealed that the different preparation routes result in a difference between the obtained samples, concerning the crystal structure and composition, surface acidity, mixed level of each component, texture, and catalytic selectivity.     

Reactions of Cr atoms with NO,N<Subscript>2</Subscript>O,CO<Subscript>2</Subscript>, NO<Subscript>2</Subscript>, and SO<Subscript>2</Subscript> molecules

Experimental results on the interaction of Cr atoms with various oxygen-containing molecules (NO, N₂O, CO₂, NO₂, and SO₂) at high temperatures (>1000 K) are presented. It is demonstrated that activation barrier for spin-forbidden reactions is higher, all other things being equal. For the reaction of Cr atoms with N₂O, an interpolated temperature dependence of the rate constant, based on the high-temperature measurements conducted in the present work and the published low-temperature data, is proposed.     

Structure and some properties of [UO<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)(C<Subscript>5</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)]

The complex [UO₂(SeO₄)(C₅H₁₂N₂O)₂(H₂O)] (I) was synthesized and studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are orthorhombic: a = 13.1661(3) Å, b = 16.4420(5) Å, c = 17.4548(6) Å, Pbca, Z = 8, R = 0.0423. The structural units of crystal I are chains with the composition coinciding with that of the compounds of the AB₂M ₃ ¹ crystal chemical group of the uranyl complexes (A = UO ₂ ²⁺ , B² = SeO ₄ ^2? , M¹ = C₅H₁₂N₂O and H₂O).     

Influence of ZrO<Subscript>2</Subscript> on the physicochemical properties of the ZrO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> binary system

A series of ZrO₂-TiO₂ mixed oxides with different weight ratios (5, 20, and 30% ZrO₂) were prepared by wet impregnation of TiO₂-P25 Degussa with certain amounts of ZrO(NO₃)₂·6H₂O (Fluka) dissolved in deionised water. The samples were characterized by the XRD, , , , and BET methods. An increase in ZrO₂ content shifted the phase transition temperature (anatase into rutile) toward higher temperatures. X-ray diffraction using an Anton Paar XRK900 reactor chamber indicated that, in the case of samples containing ZrO₂, an additional diffraction peak appeared after cooling down to 25°C. This peak could be attributed to a polymorph of TiO₂ such as in the single crystal of anatase or hexagonal form of TiO₂ which appears in the presence of ZrO₂. Generally, the preparation of dioxide systems can modify the properties of pure compounds or generate new catalytic sites as a result of strong interaction between ZrO₂ and TiO₂ oxides. The binary systems exhibit advantages like strong acidity, extended specific surface area, and high thermal stability in comparison with TiO₂. The article is published in the original.     

Effect of the Composition of Modified SO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack>/ZrO<Subscript>2</Subscript> on Catalytic Properties in Reduction of NO by Hydrocarbons

We have shown that the activity of cobalt-containing catalysts based on sulfated zirconium dioxide in selective catalytic reduction (SCR) of NO by methane depends on the amount of sulfur and the preparation method. Modification of Fe and Mn improves the catalytic behavior of SO ₄ ²⁻ /ZrO₂ as a result of the increase in the concentration of active sites.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 121–125, March– April, 2005.     

ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> binary oxides as promising supports for palladium catalysts of hydrodechlorination

Deposited palladium catalysts of the hydrodechlorination of 1,3,5-trichlorobenzene were studied. Pure zirconium and aluminum oxides and ZrO₂-Al₂O₃ mixtures with 1, 5, and 10 mol % Al₂O₃ prepared by coprecipitation were used as supports. Palladium was deposited by the precipitation of its hydroxide on supports. Catalysts on binary supports (ZrO₂ + 1% Al₂O₃ and ZrO₂ + 5% Al₂O₃) exhibited higher activity and stability in hydrodechlorination compared with catalysts on pure supports. The suggestion was made that the high activity and stability of these systems in hydrodechlorination was related to the formation of binary oxide in the interaction of ZrO₂ with palladium oxide at the stage of annealing of the catalyst precursor. Binary oxide, which was a center of the activation of the C-Cl bond, was simultaneously a source of active hydrogen. The presence of various palladium states in catalysts was substantiated by the temperature programmed reduction method.     

Hydrothermal synthesis of nanosized and amorphous alumina in the ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

The reciprocal influence of components on the chemical and structural transformations in the ZrO₂-Al₂O₃-H₂O system during nanoparticle formation under hydrothermal conditions is considered. The possibility of formation of amorphous aluminum oxide under hydrothermal conditions is found as a result of the influence of zirconia nanoparticles on the crystallization.     

Photocatalytic reduction of CO<Subscript>2</Subscript> over TiO<Subscript>2</Subscript> based catalysts

At present, carbon dioxide is considered the largest contributor among greenhouse gases. This review covers the current state of problem of carbon dioxide emissions from industrial and combustion processes, the principle of photocatalysis, existing literature related to photocatalytic CO₂ reduction over TiO₂ based catalysts and the effects of important parameters on the process performance including light wavelength and intensity, type of reductant, metal-modified surface, temperature and pressure. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Mechanism of methanol conversion on ZrO<Subscript>2</Subscript> and 5% Cu/ZrO<Subscript>2</Subscript> according to in situ IR spectroscopic data

It is demonstrated by in situ IR spectroscopy that, in methanol conversion on ZrO₂ and 5% Cu/ZrO₂ catalysts, methoxy groups are present on the catalyst surface, which result from O-H or C-O bond breaking in the methanol molecule. Two types of formate complexes, localized on ZrO₂ and CuO, are also observed. The formate complexes form via the oxidative conversion of the methoxy groups. There are two types of linear methoxy groups. First-type linear methoxy groups condense with the formate complex located on CuO to yield methyl formate and then CO and H₂. Second-type methoxy groups appear as intermediate products in the formation of dimethyl ether. The main hydrogen formation reactions are the recombination of hydrogen atoms (which result from the interconversion of surface complexes) on copper clusters and the decomposition of methyl formate. The source of CO₂ in the gas phase is the formate complex, and the source of CO is methyl formate. The effect of water vapor and oxygen the surface reactions and product formation is discussed.     

Selective Catalytic Reduction of NO by NH<Subscript>3</Subscript> over MoO<Subscript>3</Subscript> Promoted Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

A series of MoO₃ doped Fe₂O₃ catalysts prepared by the co-precipitation method were investigated in the selective catalytic reduction of NO by NH₃ (NH₃-SCR). The catalysts displayed excellent catalytic activity from 225 to 400°C and high tolerance to SO₂/H₂O poisoning at 300°C. To characterize the catalysts the N₂-BET, XRD, Raman, NO-TPD, NH₃-TPD and in situ DRIFTS were carried out. It was found that the main reason explaining a high NH₃-SCR performance might be the synergistic effect between Fe and Mo species in the catalyst that could enhance the dispersion of Fe₂O₃ and increase NH₃ adsorption on the catalyst surface.     

Binary ZrO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> xerogels: Synthesis and properties

Binary systems of silica and zirconia xerogels have been prepared by hydrolysis of zirconium(IV) oxychloride in the silica gel matrix. Systems of various composition have been studied by ¹H NMR, IR spectroscopy, and thermogravimetry and have been tested in a model process of hydrogen peroxide decomposition. It has been shown that the physicochemical properties of binary oxide systems can be tailored by varying the component ratio.     

Synthesis and characterization of ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanofilms

Processes involved in the preparation of zirconia and yttria thin films by sol-gel technology from film-forming solutions (FFSs) were studied over the entire range of concentrations. The physicochemical properties, composition, and structure of the films were studied.     

Ethanol dehydrogenation on copper catalysts with ytterbium stabilized tetragonal ZrO<Subscript>2</Subscript> support

The physicochemical and catalytic properties of Cu-containing crystalline zirconia, obtained via sol–gel synthesis in the presence of Yb³⁺ ions and polyvinylpyrrolidone, are studied. DTG/DSC, TEM, XRD and BET methods are used to analyze the crystallization, texture, phase uniformity, surface and porosity of ZrO₂ nanopowders. It is shown that increasing the copper content (1, 3, and 5 wt % from ZrO₂) raises the dehydrogenation activity in the temperature range of 100–400°C and lowers the activation energy of acetaldehyde formation. It is found that the activity of all Cu/t-ZrO₂ catalysts grows under the effects of the reaction medium, due to the migration and redispersion of copper.     

Oxygen redistribution in ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

This work represents the results of oxygen redistribution studies at quantitative and isotopic levels in synthesis and thermal treatment of ZrO - (0 to 35 mol %) Y₂O₃ solid solution crystals. The crystals were grown by directed melt crystallization method in a cold container using direct high-frequency heating. The crystal oxygen content and isotopic composition data was collected with respect to stabilizer concentration and technological conditions of synthesis. The temperature and frequency relationships of crystal electroconductivity were also studied. Some strength and tribological characteristics of the given materials were represented. The solid state formation by directional melt crystallization was shown to involve oxygen isotopic exchange interaction between the melt, growing crystal, and gas phase.     

Study and Thermodynamic Analysis of the ZrO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> System

The system ZrO₂-SiO₂ was additionally studied by means of differential thermal analysis. The temperatures of the solid-state decomposition of zircon and the coordinates of the eutectic point were refined. A thermodynamic calculation of the system in terms of the theory of subregular ionic solutions was carried out on the basis of the experimental data obtained.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 2, 2005, pp. 207–210.Original Russian Text Copyright © 2005 by Kamaev, Archugov, Mikhailov.