Influence of temperature on metal-organic frameworks

Reaction temperature is one of the key parameters in the synthesis of metal-organic frameworks （MOFs）. Though there is no convergence with regard to the various experimental parameters, reaction temperature has been found to have remarkable influence on the formation and structure of MOFs, especially toward the control of topology and dimensionality of the MOF structures. Theoretically, the reaction temperature affects directly the reaction energy barrier in reaction thermodynamics and the reaction rate in the reaction kinetics. This review aims to show the influence of reaction temperature on crystal growth/assembly, structural modulation and transformation of MOFs, and to provide primary information and insights into the design and assernblv of desired MOFs.     

Two luminescent enantiomorphic 3D metal-organic frameworks with 3D homochiral double helices

Two enantiomorphic Cd(II) coordination polymers with three-dimensional homochiral double helices have been assembled respectively from two tripodal enantiopure amino acid derivatives, which exhibit (3,4)-connected (6(3))(6(3).10(3)) topology and strong purple fluorescence.     

3D metal-organic frameworks based on elongated tetracarboxylate building blocks for hydrogen storage

Two 3D metal-organic frameworks (MOFs) with a new biphenol-derived tetracarboxylate linker and Cu(II) and Zn(II) metal-connecting points were synthesized and characterized by single-crystal X-ray crystallographic studies. The two isostructural MOFs exhibit distorted PtS network topology and show markedly different framework stability. The porosity and hydrogen uptake of the frameworks were determined by gas adsorption experiments.     

Highly emissive Zn-Ln metal-organic frameworks with an unusual 3D inorganic subnetwork

Mixed zinc-lanthanide (Zn-Ln) metal-organic frameworks (MOFs) based on the 3,5-pyrazoledicarboxylate ligand exhibit an unusual three-dimensional (3D) inorganic subnetwork and display highly efficient photoluminescence.     

3D metal-organic frameworks based on lanthanide-seamed dimeric pyrogallol[4]arene nanocapsules

Two novel 3D metal-organic frameworks(MOFs)with cds network,{[Me NH_3]_7[Ln_8(Pg C_2)_2(H_2O)_y(HCOO)_7]}_n·x(Solvent)(FJI-Y4,FJI=Fujian Institute,Ln=Gd,y=12;FJI-Y5,Ln=Dy,y=11;Pg C_2=C-ethylpyrogallol[4]arene),based on unprecedented dimeric pyrogallol[4]arene-based Ln_8metal-organic nanocapsule(MONC)supramolecular building blocks and formate linkers,have been prepared under solvothermal conditions.To our best of knowledge,they present not only the first two examples of 3D hierarchical structures constructed from MONCs in metal-pyrogallol[4]arene system,but also the first two examples of MOFs based on lanthanide MONCs.Remarkably,the inner cavity volume of the Ln_8capsule in FJI-Y4 and FJI-Y5 is approximately151?~3,which is larger than those found in previous transition metal-seamed dimeric Pg C_n-based MONCs.Magnetic investigation on FJI-Y4 suggests a significant magnetocaloric effect(23.97 J kg~(-1)K~(-1),ΔH=7 T,2.5 K),while FJI-Y5 exhibits slow relaxation of the magnetization.     

3D coordination metal-organic frameworks of octacyanometalate bridging between Cu4 magnetic units

Magnetic Cu4 clusters with S = 2 are bridged by octacyanometaltate(IV) to form two 3D cluster arrays of metal-organic frameworks. Magnetic investigation shows the ferromagnetic coupling between Cu(II) ions and very weak antiferromagnetic interaction between clusters.     

Self-assembly of unprecedented [8+12] Cu-metallamacrocycle-based 3D metal-organic frameworks

[8+12]-metallamacrocycle-based 3D frameworks {[Cu(4)(pbt)(2)(SO(4))(2)(DMF)(2)(CH(3)OH)]·7H(2)O·DMF}(n) (1) and [12]-macrocycle 3D {[Cu(2)(pbt)(SO(4))(DMSO)(CH(3)OH)(2)]·5H(2)O·CH(3)OH}(n) (2) have been obtained. Both complexes display antiferromagnetic couplings and high catalytic activity in the oxidative coupling reaction of 1-ethynylbenzene and oxazolidin-2-one.     

Three-component reactions leading to 2D and 3D metal-organic frameworks assembled on dinickel-carboxylate secondary building units

Three-component reactions involving Ni(II) ions and dicarboxylate and bipyridyl ligands under hydrothermal conditions produce two novel metal-organic coordination polymers formulated empirically as [Ni(PDA)(BPE)] (1) and [Ni₂(PDA)₂(BPP)(H₂O)]·2.5H₂O (2), where PDA = 1,4-phenylenediacetate, BPE = 1,2-bis(4-pyridyl)ethane, and BPP = 1,3-bis(4-pyridyl)propane. Both compounds possess 2D or 3D metal-organic frameworks (MOFs) that are assembled on dinickel-carboxylate secondary building units. Compound 1 has a condensed 3D MOF, whereas 2 contains void between 2D MOFs where guest water molecules reside. Both compounds demonstrate antiferromagnetic coupling between Ni(II) ions.     

Homochiral 3D metal-organic frameworks from chiral 1D rods: 6-way helical packing

The chiral 3D MOFs resulted from the packing of chiral 1D SBBs were studied. It was demonstrated that the final packing pattern is sensitively dependent on the dimension of SBBs. In addition, we were able to identify a new plywood-like network from ligand 2H(2) exhibiting an unprecedented six-way chiral helical packing motif, which extends the list of invariant rod packings.     

2D conductive metal-organic frameworks for electronics and spintronics

Two-dimensional(2D) materials showcase great potentials in both fundamental research and technology development, thanks to their unique chemical and physical properties that are usually not available in corresponding bulk counterparts. As an emerging class of 2D materials, 2D conductive metal-organic frameworks(2D c-MOFs) exhibit the characteristics of pre-designable and tunable structures, excellent crystallinity, intrinsic porosity and superior conductivity. During the past decade, 2D c-MOFs have been rapidly developed in electronics, sensors, energy storage devices, etc. In this review, the electrical, magnetic and quantum properties of 2D c-MOFs are surveyed in detail. Their applications in semiconductor, metal, superconductor, topological insulator and porous magnet are highlighted. We envision that the combination of 2D c-MOFs with quantum materials could evoke rich physics, flexible chemistry and potential applications in both electronics and spintronics.     

Liquid-phase adsorption on metal-organic frameworks

This work is focusing on the potential application of metal-organic frameworks as porous materials in heterogeneous catalysis where the substrate is in solution. The understanding of such a liquid-phase heterogeneous catalytic process requires adsorption equilibrium data in solution. For this purpose several metal-organic frameworks were synthesized as reference materials and tested as adsorbents for the adsorption of substrate molecules such as styrene or ethylcinnamate from the liquid phase. The adsorption capacity strongly depends on the polarity of the substrate with respect to the solvent. In several instances solvent and polarity effects are heavily superimposed on the pore size effects. Adsorption isotherms, rates and hydrogenation of the substrates are reported and discussed.     

Stepwise synthesis of metal-organic frameworks: replacement of structural organic linkers

We demonstrate how a single-crystal to single-crystal transformation resulting from bridging-linker replacement is possible in extended 2D and 3D metal-organic frameworks (MOFs) by introducing pillared paddlewheel MOF structures into a solution containing dipyridyl linkers. No lateral movement of the layers was observed during this transformation, creating a templating effect from the "parent" structure to the "daughter" structure. A previously unattainable structure was obtained by a two-step synthetic method utilizing the bridging-linker replacement transformation method. Additionally, a bridging-linker insertion was observed when excess linker was used with the 2D MOF structure, inducing an overall 2D to 3D transformation.     

Construction of robust open metal-organic frameworks with chiral channels and permanent porosity

Four new metal-organic frameworks (MOFs) containing chiral channels have been synthesized using an achiral, triazine-based trigonal-planar ligand, 4,4',4' '-s-triazine-2,4,6-triyltribenzoate (TATB), and an hourglass secondary building unit (SBU): Zn3(TATB)2(H2O)2.4DMF.6H2O (1); Cd3(TATB)2(H2O)2.7DMA.10H2O (2); [H2N(CH3)2][Zn3(TATB)2(HCOO)].HN(CH3)2.3DMF.3H2O (3); [H2N(CH3)2][Cd3(TATB)2(CH3COO)].HN(CH3)2.3DMA.4H2O (4). MOFs 1 and 2 are isostructural and possess (10,3)-a nets containing large chiral channels of 20.93 and 21.23 A, respectively, but are thermally unstable due to the easy removal of coordinated water molecules on the SBU. Replacement of these water molecules by formate or acetate generated in situ leads to 3 and 4, respectively. Formate or acetate links SBUs to form infinite helical chains bridged by TATB to create three-dimensional anionic networks, in which one of the two oxygen atoms of the formate or acetate is uncoordinated and points into the void of the channels. This novel SBU-stabilization and channel-functionalization strategy may have general implications in the preparation of new MOFs. Thermogravimetric analysis (TGA) shows that solvent-free 3' is thermally stable to 410 degrees C, while TGA studies on samples vapor-diffused with water, methanol, and chloroform show reversible adsorption. MOF 3 also has permanent porosity with a large Langmuir surface area of 1558 m2/g. All complexes exhibit similar strong luminescence with a lambdamax of approximately 423 nm upon excitation at 268.5 nm.     

3-Fold-interpenetrated uranium-organic frameworks: new strategy for rationally constructing three-dimensional uranyl organic materials

The first series of 3-fold-interpenetrated uranium-organic frameworks, UOF-1 and UOF-2, have been synthesized by hydrothermal reactions of flexible semirigid carboxylic acids and uranyl nitrate. Structure analyses indicate that UOF-1 and UOF-2 possess flu and pts topologies, respectively.     

Influence of connectivity and porosity on ligand-based luminescence in zinc metal-organic frameworks

Applications of metal-organic frameworks (MOFs) require close correlation between their structure and function. We describe the preparation and characterization of two zinc MOFs based on a flexible and emissive linker molecule, stilbene, which retains its luminescence within these solid materials. Reaction of trans-4,4'-stilbene dicarboxylic acid and zinc nitrate in N,N-dimethylformamide (DMF) yielded a dense 2-D network, 1, featuring zinc in both octahedral and tetrahedral coordination environments connected by trans-stilbene links. Similar reaction in N,N-diethylformamide (DEF) at higher temperatures resulted in a porous, 3-D framework structure, 2. This framework consists of two interpenetrating cubic lattices, each featuring basic zinc carboxylate vertices joined by trans-stilbene, analogous to the isoreticular MOF (IRMOF) series. We demonstrate that the optical properties of both 1 and 2 correlate with the local ligand environments observed in the crystal structures. Steady-state and time-resolved spectroscopic measurements reveal that the stilbene linkers in the dense structure 1 exhibit a small degree of interchromophore coupling. In contrast, the stilbenoid units in 2 display very little interaction in this low-density 3-D framework, with excitation and emission spectra characteristic of monomeric stilbenes, similar to the dicarboxylic acid in dilute solution. In both cases, the rigidity of the stilbene linker increases upon coordination to the inorganic units through inhibition of torsion about the central ethylene bond, resulting in luminescent crystals with increased emission lifetimes compared to solutions of trans-stilbene. The emission spectrum of 2 is found to depend on the nature of the incorporated solvent molecules, suggesting use of this or related materials in sensor applications.     

Chiral metal-organic frameworks with tunable open channels as single-site asymmetric cyclopropanation catalysts

A pair of interpenetrated and non-interpenetrated chiral metal-organic frameworks with the same catalytic sites but different open channel sizes catalysed asymmetric cyclopropanation of substituted terminal alkenes with excellent diastereoselectivities (up to 9.6) and enantioselectivities (up to >99%).     

Zeolite ionic crystals assembled through direct incorporation of polyoxometalate clusters within 3D metal-organic frameworks

Polyoxometalate-based metal-organic frameworks {[Gd(dpdo)(4)(H(2)O)(3)](PMo(12)O(40))(H(2)O)(2)CH(3)CN}(n) (2), {[Dy(dpdo)(4)(H(2)O)(3)](PMo(12)O(40))(H(2)O)(20CH(3)CN}(n) (3), {[Gd(dpdo)(4)(H(2)O)(3)](H(3)O)(SiMo(12)O(40))(dpdo)(0.5)(CH(3)CN)(0.5) (H(2)O)(3)}(n) (4), {[Ho(dpdo)(4)(H(2)O)(3)](H(3)O)(SiMo(12)O(40))(dpdo)(0.5)(CH(3)CN)(0.5)(H(2)O)(3)}(n) (5), {[Ni(dpdo)(2)(CH(3)CN) (H(2)O)(2)](2)(SiMo(12)O(40))(H(2)O)(2)}(n) (6), and {[Ni(dpdo)(3)](4)(PW(12)O(40))(3)[H(H(2)O)(27)(CH(3)CN)(12)]}(n) (7) (where dpdo is 4,4'-bipyridine-N,N'-dioxide) were constructed via self-assembly by embedding Keggin-type polyanions within the intercrystalline voids as guests or pillars. Compounds 2 and 3 are isomorphic and exhibit three-dimensional (3D) noninterwoven 64 frameworks with distorted-honeycomb cavities occupied by the polyanions. Compounds 4 and 5 are comprised of 3D noninterwoven frameworks formed by linking the adjacent folded sheets through hydrogen bonds and pi-pi stacking interactions relative to the free isolated dpdo ligand. Compound 6 is a pillar-layered framework with the [SiMo(12)O(40)](4-) anions located on the square voids of the two-dimensional bilayer sheets formed by the dpdo ligands and nickel(II) ions. Compound 7 is a 3D metal-organic framework formed by nickel(II) and 4,4'-bipyridine-N,N'-dioxide with the globular Keggin-structure [PW(12)O(4)](3-) anion as the template. A large protonated water cluster H(+)(H(2)O)(27) is trapped and stabilized within the well-modulated cavity.     

Two stable 3D metal-organic frameworks constructed by nanoscale cages via sharing the single-layer walls

Two stable 3D metal-organic frameworks are constructed by the hydrothermal reactions of Cd(NO3)2.4H2O and IDC3- using bpy and Bu4NBr as templates. Both structures show the same frameworks, which are composed by the nanoscale cages via sharing the single-layer walls.     

The future of metal-organic frameworks

A personal perspective recognising the developments in the field of metal-organic frameworks, of where the challenges currently lie and the opportunities that are on the horizon.