Representation of the Functions of the Relative Phase Permeabilities for Anisotropic Porous Media

The most general representation of the functions of the relative phase permeabilities for porous media is written explicitly. The relations proposed for the relative phase permeabilities generalize those obtained earlier for media with transversely-isotropic and orthotropic percolation properties [1, 2] which can now be obtained as a particular case. A laboratory measurement technique for finding the percolation properties and determining the absolute and phase permeabilities for media with different types of anisotropy is discussed.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, 2005, pp. 118–125.Original Russian Text Copyright © 2005 by Dmitriev, Dmitriev, and Maksimov.     

Compressibility and anisotropy effects in the processes of two-phase flow through a porous medium

Functions of the relative phase permeabilities which take into account the tensor nature of the relations between the absolute and phase permeabilities are constructed on the basis of experimental data. Problems of the displacement of gas by water and of water by gas in an orthotropic pore space are studied. The relative phase permeabilities obtained are compared with functions that depend only on the local saturation. The effect of the phase compressibility and the anisotropy of the absolute permeability tensor is considered.     

Effective Relative Permeabilities and Capillary Pressure for One-Dimensional Heterogeneous Media

The paper presents an analytical construction of effective two-phase parameters for one-dimensional heterogeneous porous media, and studies their properties. We base the computation of effective parameters on analytical solutions for steady-state saturation distributions. Special care has to be taken with respect to saturation and pressure discontinuities at the interface between different rocks. The ensuing effective relative permeabilities and effective capillary pressure will be functions of rate, flow direction, fluid viscosities, and spatial scale of the heterogeneities.The applicability of the effective parameters in dynamic displacement situations is studied by comparing fine-gridded simulations in heterogeneous media with simulations in their homogeneous (effective) counterparts. Performance is quite satisfactory, even with strong fronts present. Also, we report computations studying the applicability of capillary limit parameters outside the strict limit.     

A Markov Chain Model for Effective Relative Permeabilities and Capillary Pressure

We present a new method for calculating the effective two-phase parameters of one-dimensional randomly heterogeneous porous media, which avoids the timeconsuming use of simulations on explicit realizations. The procedure is based on the steady state saturation distribution. The idea is to model the local variation of saturation and saturation dependent parameters as Markov chains, in such a way that the effective parameters are given by the asymptotic expectations of the chains. We derive the exact asymptotic moment equations and solve them numerically, based on their second order approximation. The method determines the effective parameters to a high degree of accuracy, even with large variations in rock properties. In particular, the capillary limit and viscous limit effective parameters are recovered exactly. The applicability of the effective parameters in the unsteady state case is studied by comparing the displacement production profiles in heterogeneous media and their homogenized counterpart.     

Two-Phase Filtration in a Transversally Isotropic Porous Medium: Experiment and Theory

The results of an experimental determination of the relative phase permeabilities during flow of two immiscible fluids in stratified sandstone with transversally isotropic characteristics are presented. The measurements were performed on samples oriented in three directions: along, perpendicular to and at an angle of 45° to the stratification plane. An approximate solution of the problem of steady two-phase flow toward a finite gallery in an anisotropic porous medium for arbitrary relative orientation of the gallery and the principal axes of the absolute permeability tensor is given. This solution was tested against the experimental results. The good agreement between the theoretical and experimental results makes it possible to recommend for engineering calculations both the relations between the absolute and phase permeabilities for transversally isotropic and orthotropic porous media and the approximate solution obtained.     

Miscible Displacements of Reactive and Anisotropic Dispersive Flows in Porous Media

The viscous fingering instability of miscible reactive–dispersive flows in a homogeneous porous media is investigated through nonlinear numerical simulations. In particular, the role of velocity-dependent transverse and longitudinal dispersions as well as the type and rate of auto-catalytic chemical reactions is analyzed. It is found that for a third-order auto-catalytic reaction, the higher the reaction rate, the more complex the finger structures. Furthermore, major differences between the flow development of third-order and second-order autocatalytic reactions are reported. In addition, the anisotropy and velocity dependence of the dispersion tensor are found to have a more profound effect on the fingering instability in the case of reactive flows than in the non-reactive ones. The qualitative characterization of the finger structures is explained by examining the flow velocity field and further quantified through an analysis of the average concentration and relative contact area.     

Origin and quantification of coupling between relative permeabilities for two-phase flows in porous media

An extended formulation of Darcy's two-phase law is developed on the basis of Stokes' equations. It leads, through results borrowed from the thermodynamics of irreversible processes, to a matrix of relative permeabilities. Nondiagonal coefficients of this matrix are due to the viscous coupling exerted between fluid phases, while diagonal coefficients represent the contribution of both fluid phases to the total flow, as if they were alone. The coefficients of this matrix, contrary to standard relative permeabilities, do not depend on the boundary conditions imposed on two-phase flow in porous media, such as the flow rate. This formalism is validated by comparison with experimental results from tests of two-phase flow in a square cross-section capillary tube and in porous media. Coupling terms of the matrix are found to be nonnegligible compared to diagonal terms. Relationships between standard relative permeabilities and matrix coefficients are studied and lead to an experimental way to determine the new terms for two-phase flow in porous media.     

The Role of Capillarity in Two-Phase Flow through Porous Media

When determining experimentally relative permeability and capillary pressure as a function of saturation, a self-consistent system of macroscopic equations, that includes Leverett's equation for capillary pressure, is required. In this technical note, such a system of equations, together with the conditions under which the equations apply, is formulated. With the aid of this system of equations, it is shown that, at the inlet boundary of a vertically oriented porous medium, static conditions pertain, and that potentials, because of the definition of potential, are equal in magnitude to pressures. Consequently, Leverett's equation is valid at the inlet boundary of the porous medium, provided cocurrent flow, or gravity-driven, countercurrent flow is taking place, and provided the porous medium is homogeneous. Moreover, it is demonstrated that Leverett's equation is valid for flow along the length of a vertically oriented porous medium, provided cocurrent flow, or gravity-driven, countercurrent flow is taking place, and provided the porous medium is homogeneous and there are no hydrodynamic effects. However, Leverett's equation is invalid for horizontal, steady-state, forced, countercurrent flow. When such flow is taking place, it is the sum of the pressures, and not the difference in pressures, which is related to capillary pressure.     

Hydrodynamic Effects in Two-Phase Multicomponent Mixture Flow through a Porous Medium in Oil Reservoirs with a Complex Structure

The features of the hydrodynamic processes in stratified inhomogeneous oil reservoirs are investigated using a numerical solution of the equations of two-phase multicomponent flow through a porous medium. The structures of the two-phase flows caused by the reservoir structure and the hydrodynamic interaction between the phases are analyzed in relation to problems of the displacement of oil by water in ordinary flooding and in the presence of moving thickener slugs.     

Relative Permeabilities for Strictly Hyperbolic Models of Three-Phase Flow in Porous Media

Traditional mathematical models of multiphase flow in porous media use a straightforward extension of Darcys equation. The key element of these models is the appropriate formulation of the relative permeability functions. It is well known that for one-dimensional flow of three immiscible incompressible fluids, when capillarity is neglected, most relative permeability models used today give rise to regions in the saturation space with elliptic behavior (the so-called elliptic regions). We believe that this behavior is not physical, but rather the result of an incomplete mathematical model. In this paper we identify necessary conditions that must be satisfied by the relative permeability functions, so that the system of equations describing three-phase flow is strictly hyperbolic everywhere in the saturation triangle. These conditions seem to be in good agreement with pore-scale physics and experimental data.     

Effects of Relative Permeability History Dependence on Two-Phase Flow in Porous Media

Hysteresis phenomena in multi-phase flow in porous media has been recognized by many researchers and widely believed to have significant effects on the flow. In an attempt to account for these effects, a theoretical model for history-dependent relative permeabilities is considered. This model is incorporated into 1-D two-phase nondiffusive flow system and the corresponding flow is predicted. Flow history is observed to have a notable impact on the saturation profile and fluids breakthrough.     

Numerical Investigations of the Steady State Relative Permeability of a Simplified Porous Medium

The purpose of this paper is to investigate, by flow simulations in a uniform pore-space geometry, how the co and countercurrent steady state relative permeabilities depend on the following parameters: phase saturation, wettability, driving force and viscosity ratio. The main results are as follows: (i) with few exceptions, relative permeabilities are convex functions of saturation; (ii) the cocurrent relative permeabilities increase while the countercurrent ones decrease with the driving force; (iii) with one exception, phase 2 relative permeabilities decrease and phase 1 relative permeabilities increase with the viscosity ratio M=₁/₂; (iv) the countercurrent relative permeabilities are always less than the cocurrent ones, the difference being partly due to the opposing effect of the viscous coupling, and partly to different levels of capillary forces; (v) the pore-level saturation distribution, and hence the size of the viscous coupling, can be very different between the cocurrent and the countercurrent cases so that it is in general incorrect to estimate the full mobility tensor from cocurrent and countercurrent steady state experiments, as suggested by Bentsen and Manai (1993).(Now at AS Norske Shell, Norway.) e-mail:     

An Analysis of Three-Phase Pore Occupancies and Relative Permeabilities in Porous Media with Variable Wettability

In three-phase flow, the macroscopic constitutive relations of capillary pressure and relative permeability as functions of saturation depend in a complex manner on the underlying pore occupancies. These three-phase pore occupancies depend in turn on the interfacial tensions, the pore sizes and the degree of wettability of the pores, as characterised by the cosines of the oil–water contact angles. In this work, a quasi-probabilistic approach is developed to determine three-phase pore occupancies in media where the degree of wettability varies from pore to pore. Given a set of fluid and rock properties, a simple but novel graphical representation is given of the sizes and oil–water contact angles underlying three-phase occupancies for every allowed combination of capillary pressures. The actual phase occupancies are then computed using the contact angle probability density function. Since a completely accessible porous medium is studied, saturations, capillary pressures, and relative permeabilities are uniquely related to the pore occupancies. In empirical models of three-phase relative permeability it is of central importance whether a phase relative permeability depends only on its own saturation and how this relates to the corresponding two-phase relative permeability (if at all). The new graphical representation of pore sizes and wettabilities clearly distinguishes all three-phase pore occupancies with respect to these saturation-dependencies. Different types of saturation-dependencies may occur, which are shown to appear in ternary saturation diagrams of iso-relative permeability curves as well, thus guiding empirical approaches. However, for many saturation combinations three-phase and two-phase relative permeabilities can not be linked. In view of the latter, the present model has been used to demonstrate an approach for three-phase flow modelling on the basis of the underlying pore-scale processes, in which three-phase relative permeabilities are computed only along the actual flow paths. This process-based approach is used to predict an efficient strategy for oil recovery by simultaneous water-alternating-gas (SWAG) injection.     

油水两相渗流压力脉动的实验及数值分析

本文用高精度的压差传感器和高速度的数据采集设备同时测量出油水两相流体在多孔介质流动时产生的较大压力降和微小压力脉动,应用自行研制的大型数据处理软件对恒流速水驱油的两相渗流压力脉动实验数据进行了分析,发现不同阶段压力脉动具有明显的频谱特性和时间相关特性的不同,在第三阶段（油为主,水增加阶段）谱能增加最大,时间正相关程度最强。     

Boiling in Porous Media: Model and Simulations

We present a modelization of the heat and mass transfers within a porous medium, which takes into account phase transitions. Classical equations are derived for the mass conservation equation, whereas the equation of energy relies on an entropy balance adapted to the case of a rigid porous medium. The approximation of the solution is obtained using a finite volume scheme coupled with the management of phase transitions. This model is shown to apply in the case of an experiment of heat generation in a porous medium. The vapor phase appearance is well reproduced by the simulations, and the size of the two-phase region is correctly predicted. A result of this study is the evidence of the discrepancy between the air – water capillary and relative permeability curves and water – water vapor ones.     

Macroscale Thermodynamics and the Chemical Potential for Swelling Porous Media

The thermodynamical relations for a two-phase, N-constituent, swelling porous medium are derived using a hybridization of averaging and the mixture-theoretic approach of Bowen. Examples of such media include 2-1 lattice clays and lyophilic polymers. A novel, scalar definition for the macroscale chemical potential for porous media is introduced, and it is shown how the properties of this chemical potential can be derived by slightly expanding the usual Coleman and Noll approach for exploiting the entropy inequality to obtain near-equilibrium results. The relationship between this novel scalar chemical potential and the tensorial chemical potential of Bowen is discussed. The tensorial chemical potential may be discontinuous between the solid and fluid phases at equilibrium; a result in clear contrast to Gibbsian theories. It is shown that the macroscopic scalar chemical potential is completely analogous with the Gibbsian chemical potential. The relation between the two potentials is illustrated in three examples.     

On the Validity of Darcy's Law for Stable High-Concentration Displacements in Granular Porous Media

Recently, it has been suggested that Darcy's Law might not be applicable for modelling miscible, density-dependent flow in porous media. To investigate this, three sets of careful laboratory column experiments were performed on coarse and medium sands, consisting of upward displacement of water by sodium chloride solutions with concentrations ranging from 5 to 200g/l. Data on salt concentrations and water pressures were collected in horizontal transects along the flow direction. Salt concentration data were also collected in the influent and exit lines. The experimental data were analysed using a simplified approach based on Darcy's Law alone, applied with the assumption of a sharp interface. Darcy's Law was used to estimate porous medium permeability by fitting predictions to experimental data. Consistent estimates of permeability were obtained for each set of experiments. The results indicate that Darcy's Law adequately describes high concentration displacements through saturated coarse- and medium-grained porous media.     

Perturbation Formula for Phase Velocity of Rayleigh Waves in Prestressed Anisotropic Media

Herein we consider Rayleigh waves propagating along the free surface of a macroscopically homogeneous, anisotropic, prestressed half-space. We adopt the formulation of linear elasticity with initial stress and assume that the deviation of the prestressed anisotropic medium from a comparative ‘unperturbed’, unstressed and isotropic state, as formally caused by the initial stress and by the anisotropic part of the incremental elasticity tensor, be small. No assumption, however, is made on the material anisotropy of the incremental elasticity tensor. With the help of the Stroh formalism, we derive a first-order perturbation formula for the shift of phase velocity of Rayleigh waves from its comparative isotropic value. Our perturbation formula does not agree totally with that which was derived some years ago by Delsanto and Clark, and we provide another argument as further support for our version of the formula. According to our first-order formula, the anisotropy-induced velocity shifts of Rayleigh waves, taken in totality of all propagation directions on the free surface, carry information only on 13 elastic constants of the anisotropic part of the incremental elasticity tensor. The remaining eight elastic constants are those which would become zero if were monoclinic with the two-fold symmetry axis normal to the free surface of the material half-space in question.     

非饱和多孔介质有限元分析的基本控制方程与变分原理

本文在对问题研究现状进行阐述的基础上较系统地给出了骨架可变形非饱和多孔介质的全耦合分析模型，模型中考虑了孔隙气体，水（油）流动对介质力学性能的影响，多孔介质的饱和度，渗透系数与毛吸压力的关系，由实验给出，所导出的控制方程以固体骨架的位移与孔隙流体压力为基本未知量，由于问题的非自共轭特征，文中构造了非饱和介质动力问题的参数变分形式，并在此基础上给出有限元离散方程。