Novel multi-branched two-photon polymerization initiators of ketocoumarin derivatives

Novel multi-branched two-photon absorbing dyes containing highly efficient UV–vis curing initiator, ketocoumarin (3-acetyl-7-diethylaminocoumarin), were synthesized. There linear and non-linear optical properties were studied and the cooperatively enhanced two-photon absorption of two- and three-branched dyes were confirmed by femtosecond laser pulses. The largest two-photon absorption cross-section was obtained as 1117 GM. The results of photobleaching experiments showed that all dyes had very fast electron transferring speed with the commercial coinitiator o-Cl-hexaarylbisimidazoles (HABI). The two-photon polymerization initiated by a bimolecular system composed of the two-branched dye and HABI was investigated. This photopolymer system presented high photoinitiating efficiency. The single-shot two-photon exposure of the resin film was achieved with a threshold as 1 TW/cm² at 800 nm.     

A disposable impedance sensor for electrochemical study and monitoring of adhesion and proliferation of K562 leukaemia cells

A polyaniline-modified screen-printed carbon electrode (PANI/SPCE) was prepared by electropolymerization for the construction of a novel disposable cell impedance sensor. The conductive polymer improved greatly the electron transfer of SPCE and was very effective for cell immobilization. The adhesion of cells increased the electron transfer resistance (R_et) of redox probe on the PANI/SPCE surface, producing an impedance sensor for K562 leukaemia cells with a semilogarithm linear range from 10⁴ to 10⁷ cells ml⁻¹ and a limit of detection of 8.32 × 10³ cells ml⁻¹ at 10σ. The proliferation of cells on the conductive polymer increased the R_et, leading to a novel way to monitor the growth process of cells on the PANI/SPCE. The electrochemical monitoring indicated K562 leukaemia cells cultured in vitro on the PANI surface were viable for 60 h, consistent with the analysis from microscopic imaging and MTT assay. This method for monitoring the surface proliferation and detecting the number of viable cells was simple, low-cost and disposable, thus providing a convenient avenue for electrochemical study of cell immobilization, adhesion, proliferation and apoptosis.     

Bromodimethylsulfonium bromide (BDMS) catalyzed synthesis of imidazo[1,2-a]pyridine derivatives and their fluorescence properties

A convenient synthetic protocol for the synthesis of imidazo[1,2-a]pyridine has been developed by employing one-pot three-component Ugi reaction by employing aromatic amidine, aromatic aldehyde, and isocyanide using 5 mol % of bromodimethylsulfonium bromide (BDMS) at room temperature. In addition, they also exhibit interesting fluorescence properties, which may be useful for fluorescent probe. Mild reaction conditions, non-aqueous work-up procedure, good yields, short reaction time, and no need of chromatographic separation are some of the salient features of the present protocol.     

A self-assembled monolayer based electrochemical immunosensor for detection of leukemia K562A cells

A novel strategy to quantify the cell number of leukemia K562A cells using electrochemical immunosensor was developed by effective surface immunoreaction between P-glycoprotein (P-gp) on cell membrane and P-gp mouse monoclonal antibody bound on an epoxysilane monolayer modified glassy carbon electrode. The surface morphologies of the epoxysilane monolayer and the bound antibodies were studied with atomic force microscopy. The binding of target K562A cells onto the immobilized antibodies increased the electron-transfer impedance of electrochemical probe, which depended linearly on the cell concentration in the range of 5.0 × 10⁴–1.0 × 10⁷ cells mL⁻¹. The detection limit of the immunosensor was 7.1 × 10³ cells mL⁻¹. The proposed strategy showed acceptable reproducibility with an RSD of 3.4% for the linear slope and good precision with the RSD of 3.7% and 3.0% examined at the cell concentrations of 2.0 × 10⁶ and 1.0 × 10⁷ cells mL⁻¹.     

A lysosomal targeting fluorescent probe and its zinc imaging in SH-SY5Y human neuroblastoma cells

A fluorescent probe based PET mechanism was designed, and the probe could image endogenous release of Zn²⁺ upon H₂O₂ stimulation in SH-SY5Y cells.     

Experimental and theoretical study of a new carbazole derivative having terminal benzimidazole rings

A novel intramolecular donor–acceptor compound has been synthesized and characterized. This compound was a symmetrical A–π–D–π–A type molecule containing two benzimidazole rings as two electron acceptors (A) and an N-ethylcarbazole group as electron donors (D). The absorption and emission spectra of the compound were determined by experimental methods in solution and were computed by using the density functional theory (DFT) and the time-dependent density functional theory (TDDFT) in gas phase and in chloroform solution. The calculated absorption and emission wavelengths were in good agreement with the experimental ones. The fluorescence quantum yields and fluorescence lifetimes of the compound in several solvents have been studied by means of steady state and time resolved fluorescence. The results showed the compound had high quantum yield. The cross-section of two-photon absorption (TPA) of the compound was measured by using femtosecond laser in dichloromethane solution. The result indicated the cross-section maximum of two-photon absorption was 430 GM at 600 nm. These results made the compound of great interest as a new fluorescent probe and photoluminescence material.     

Anticancer and antimicrobial evaluation of newly synthesized steroidal 5,6 fused benzothiazines

A series of new 5α-cholestano [5,6-b] benzothiazines (4–6) has been synthesized by the reaction of 5α-cholestan-6-one (1–3) with 2-aminothiophenol in the presence of iodine. The structures of newly synthesized compounds have been established on the basis of spectral and analytical data. Compounds (1–6) were screened for in vitro anticancer activity against the human cancer cell lines; SW480 (colon adenocarcinoma cells), A549 (lung carcinoma cells), HepG2 (hepatic carcinoma cells) and HeLa (cervical cancer cells) using MTT assay during which the products (4–6) showed marked increase in anticancer activity and in particular, compound 6 showed IC₅₀ = 13.73 μmol L⁻¹ against HeLa cells, being more effective than Doxorubicin against the same cells. Compounds 4 and 6 also showed minimum IC₅₀ of 15.83 μmol L⁻¹ and 16.89 μmol L⁻¹ against HepG2 and A549 cells, respectively. Compounds (1–6) were also tested for in vitro antimicrobial activity against different bacterial as well as fungal strains during which newly synthesized compounds (4–6) were found more potent than starting compounds (1–3). Compound 4 was found to be more potent than the reference drug, Chloramphenicol, in the case of Escherichia coli while compound 5 was found almost equally potential antifungal agent against P. marneffei in comparison with the reference drug, Nystatin.     

Surface patterning using scanning electrochemical microscopy to locally trigger a “click” chemistry reaction

We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates.     

Synthesis,characterization, X-ray diffraction,antimicrobial and in vitro cytotoxicity studies of 7a-Aza-B-homostigmast-5-eno [7a,7-d] tetrazole

The synthesis, spectral characterization, crystal structure and antimicrobial activity of the novel synthetic molecule 7a-Aza-B-homostigmast-5-eno [7a,7-d] tetrazole, C₂₉H₄₈N₄ has been reported. The structure has also been determined by X-ray diffraction technique using direct method and was refined on F² by the full-matrix least-squares. Crystals are orthorhombic and their space group is P212121, with a = 7.230(3), b = 31.451(13), c = 11.974(5) (Å), α = β = γ = 90°. It can be conveniently obtained by the reaction of 7-Oxostigmast-5-ene with hydrazoic acid. The molecule has also been screened for its possible in vitro antimicrobial activity against Staphylococcus aureus, Streptococcus mutans, Streptococcus pyogenes, Staphylococcus epidermidis, Bacillus cereus, Corynebacterium xerosis, Escherichia coli, Klebsiella pneumoniae, Proteus vulgaris and Pseudomonas aeruginosa (MTCC 424). Minimum inhibitory concentration (MIC) of the synthesized compound has also been evaluated. The highest activity is observed against C. xerosi and P. vulgaris. Moreover, the compound has also been screened for its in vitro cytotoxicity against human colon carcinoma cell line, HCT116 and human liver hepatocellular carcinoma cell line, HepG2, using doxorubicin as standard. On the basis of its IC₅₀ values, 7a-Aza-B-homostigmast-5-eno [7a,7-d] tetrazole was found to inhibit the cancer cells effectively.     

High resolution LAPS and SPIM

The resolution of photocurrent measurements at field-effect capacitors as used in light-addressable potentiometric sensors (LAPS) and scanning photo-induced impedance microscopy (SPIM) has been investigated using silicon on sapphire (SOS) substrates illuminated at different wavelengths. Using a two-photon effect in silicon (λ = 1250 nm) to generate the photocurrent, genuine submicrometer resolution has been demonstrated for LAPS and SPIM. Improved sensitivity for both LAPS and SPIM was obtained using a 6.7 nm thick gate oxide on SOS anodically grown in 0.1 M HCl.     

Novel 2,5-disubstituted-1,3,4-oxadiazole derivatives induce apoptosis in HepG2 cells through p53 mediated intrinsic pathway

A series of novel 1,3,4-oxadiazole derivatives (OSD, OCOD, ONOD, OPD, COD, PMOD, and PCOD) were synthesized and characterized. Their structures were confirmed on the basis of IR, NMR and mass spectroscopy and molecular weights were found in the range 300–325 g/mol. Cancerous cell lines (MCF-7, HepG2) and non-cancerous cell lines (Chang liver cells) were treated with these compounds for 48 h, which caused dose dependent decrease in the cell viability. From the seven derivatives, OSD was found to be most potent with IC₅₀ value close to 50 μM on all tested cell lines. Hence, this compound was selected for mechanistic study on HepG2 cell lines. Fluorescent cell staining and DNA fragmentation study of 50 μM OSD on HepG2 cells, showed events marked by apoptosis such as nuclear fragmentation, cytoplasm shrinkage and DNA damage. Further, the cells with same treatment were quantified for apoptosis using annexin V-PI flow cytometric technique. The percentage of apoptotic cells was significantly higher (p < 0.05) after OSD treatment compared to control cells. OSD induced a significant increase (p < 0.05) in the expression of the tumor suppressor p53 in HepG2 cells. The constitutive expression of anti-apoptotic protein Bcl-2 significantly decreased (p < 0.05) after treatment, while the expression of proapoptotic protein Bax significantly increased (p < 0.05). The change in Bax to Bcl-2 ratio suggested involvement of Bcl-2 family in induction of apoptosis. Furthermore, the levels of caspase-9 and caspase-3 were significantly (p < 0.05) up regulated in HepG2 cells after OSD treatment. The data suggest that 1,3,4-oxadiazole derivatives induce apoptosis mediated by intrinsic pathway of apoptosis. The findings strengthen the potential of the 1,3,4-oxadiazole scaffold OSD, as an agent with chemotherapeutic and cytostatic activity in human hepatocellular carcinoma in vitro.     

Electrogenerated chemiluminescence aptamer-based biosensor for the determination of cocaine

A novel electrogenerated chemiluminescence aptamer-based (ECL-AB) biosensor for the determination of a small molecule drug is designed employing cocaine-binding aptamer as molecular recognition element for cocaine as a model analyte and ruthenium complex served as an ECL label. A 5′-terminal cocaine-binding aptamer with the ECL label at 3′-terminal of the aptamer was utilized as an ECL probe. The ECL-AB biosensors were fabricated by immobilizing the ECL probe onto a gold electrode surface via thiol-Au interactions. An enhanced ECL signal is generated upon recognition of the target cocaine, attributed to a change in the conformation of the ECL probe from random coil-like configuration on the probe-modified film to three-way junction structure, in close proximity to the sensor interface. The integrated ECL intensity versus the concentration of cocaine was linear in the range from 5.0 × 10⁻⁹ to 3.0 × 10⁻⁷ M. The detection limit was 1.0 × 10⁻⁹ M. This work demonstrates that the combination of a highly binding aptamer to analyte with a highly sensitive ECL technique to design ECL-AB biosensor is a great promising approach for the determination of small molecule drugs.     

Structural and electrochemical investigation of Li2MgSnO4 anode for lithium batteries

Hexagonal Li₂MgSnO₄ compound was synthesized at 800 °C using Urea Assisted Combustion (UAC) method and the same has been exploited as an anode material for lithium battery applications. Structural investigations through X-ray diffraction, Fourier Transform Infra Red spectroscopy and ⁷Li NMR (Nuclear Magnetic Resonance spectroscopy) studies demonstrated the existence of hexagonal crystallite structure with a = 6.10 and c = 9.75. An average crystallite size of ∼400 nm has been calculated from PXRD pattern, which was further evidenced by SEM images. An initial discharge capacity of ∼794 mA h/g has been delivered by Li₂MgSnO₄ anode with an excellent capacity retention (85%) and an enhanced coulombic efficiency (97–99%). Further, the Li₂MgSnO₄ anode material has exhibited a steady state reversible capacity of ∼590 mA h/g even after 30 cycles, thus qualifying the same for use in futuristic lithium battery applications.     

Anti-Cancer Effect of Kaffir Lime (Citrus Hystrix DC) Leaf Extract in Cervical Cancer and Neuroblastoma Cell Lines

Previous study showed that kaffir lime leaf contains alkaloid, flavonoid, terpenoid, tannin and saponin. The objective of this study was to examine the cytotoxic effect of kaffir lime leaf extract on cervical cancer and neuroblastoma cell lines. The method used for this research to determine cell viability was an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Results showed that an ethyl acetate extract had an IC50 for HeLa cells, UKF-NB3, IMR-5 and SK-N-AS parental cells of 40.7 μg · mL^–1, 28.4 μg · mL^–1, 14.1 μg · mL^–1, and 25.2 μg · mL^–1 respectively. Furthermore, the IC50 of chloroform extracts for HeLa cells, UKF-NB3, IMR-5 and SK-N-AS parental were 17.6 μg · mL^–1, 18.9 μg · mL^–1, 6.4 μg · mL^–1, and 9.4 μg · mL^–1 respectively. These data showed that kaffir lime extract reduces the viability of cervical and neuroblastoma cell lines and may have potential as anti-cancer compounds.     

Synthesis of 99mTc-gemifloxacin freeze dried kits and their biodistribution in Salmonella typhi,Pseudomonas aeruginosa and Klebsiella pneumoniae

Gemifloxacin, a novel, 4th generation fluoroquinolone derivative, was labeled with^99mTc; its freeze dried kits were prepared and used for infection imaging. Kits showed great stability with higher labeling efficiency. Kits were synthesized through a simple method; developed at room temperature without HCl and heating with low colloidal content. Reaction conditions were optimized in order to get maximum radiochemical purity. Highest labeling efficiency (99 ± 0.05)% was achieved when 1.0 mg gemifloxacin was labeled with 10 mCi sodium pertechnetate in the presence of 50 μg SnCl₂ and 300 μg D-penicillamine at room temperature. Radiolabeled antibiotic kits were preclinically assessed such as in-vitro stability, lipophilicity, protein binding, in-vitro binding with bacterial strains and pharmacokinetic investigations in animals. Kits were found highly stable for 6 h both at room temperature and at 37 °C in serum. Biodistribution showed excellent uptake of activity at infection site (in Pseudomonas aeruginosa, Salmonella typhi and Klebsiella pneumoniae). Biodistribution data showed that ^99mTc-gemifloxacin has the potential and may be used for infection imaging.     

Effect of irradiation on kinetic behavior of Salmonella Typhimurium and Staphylococcus aureus in lettuce and damage of bacterial cell envelope

This study evaluated effect of gamma irradiation on survival of Salmonella Typhimurium and Staphylococcus aureus on lettuce and damage of cell envelope. S. Typhimurium and S. aureus were inoculated on red leaf lettuce, and they were irradiated at 0, 0.5, 1, 1.5, 2, 2.5, and 3 kGy, and the samples were then stored at 7 and 25 °C for 7 days. Survival of S. Typhimurium and S. aureus were enumerated on xylose lysine deoxycholate agar and Baird–Parker agar, respectively. D₁₀ value (dose required to reduce 1 log CFU/leaf) was calculated, and kinetic parameters (maximum specific growth rate; μ_max and lag phase duration; LPD) were calculated by the modified Gompertz model. In addition, cell envelope damage of the pathogens was observed by scanning electron microscope (SEM) and transmission electron microscope (TEM). D₁₀ values were 0.35 and 0.33 kGy for S. Typhimurium and S. aureus, respectively. During storage at 7 °C, S. Typhimurium and S. aureus had significant (P<0.05) growth only on non-irradiated samples up to about 2.5 and 4 log CFU/leaf at 0.42 and 1.28 log CFU/leaf/day of μ_max, respectively. At 25 °C, cell counts of S. Typhimurium and S. aureus on the samples irradiated at 0 and 0.5 kGy increased (P<0.05) up to 3–6 log CFU/leaf. The μ_max of both pathogens were higher in 0 kGy (1.08–2.27 log CFU/leaf/day) and 0.5 kGy (0.58–0.92 log CFU/leaf/day), and LPDs ranged from 1.53 to 3.14 day. SEM and TEM observations showed that cells irradiated at 1.5 and 3 kGy showed disrupted cell membrane. These results indicate that gamma irradiation could be a useful decontamination technology to improve food safety of lettuce by destroying cells of S. Typhimurium and S. aureus.     

Thermochemistry of the biochemical reaction: { pyrophosphate(aq) + H2O(l) = 2 phosphate(aq)}

Calorimetric enthalpies of reaction have been measured for the overall biochemical reaction{pyrophosphate(aq)  +  H₂O(l)  =  2phosphate (aq)} . The reaction was catalyzed by alkaline phosphatase and, to simplify the thermochemistry, was carried out in the absence of Mg ^2 + (aq). Measurements were performed with phosphate buffer ( pH  =  7.19 and 7.94), PIPES buffer ( pH  =  7.13), and HEPES buffer ( pH  =  7.86). The results of these measurements were analyzed by using an equilibrium model. These calculations lead to the standard molar enthalpy changeΔ_rH_m^o =  − (17.3  ±  0.6)kJ·mol ^− 1 (temperature T =  298.15 K and ionic strengthI =  0) for the reference reaction{HP₂O₇^3 − (aq)  +  H₂O(l)  =  2HPO₄^2 − (aq)  +  H ⁺ (aq)} . Values of the apparent equilibrium constantK^′ for the overall biochemical reaction from the literature were also analyzed by using the equilibrium model in order to obtain what is believed to be a reliable value for the equilibrium constantK =  4.7 · 10 ^− 4 for the reference reaction. The values ofK and Δ_rH_m^o for the reference reaction have been used together with values from the CODATA tables to calculate standard molar formation properties for the pyrophosphate species.     

Application of a laser produced plasma: Experimental Stark widths of single ionized lead lines

The optical emission spectroscopy from laser produced plasma generated by a 10,640 Å radiation, with an irradiance of 1.4 × 10¹⁰ W cm^− 2 on several lead targets, in vacuum and in an atmosphere of argon, was recorded and analyzed between 1900 and 7000 Å. The Local Thermodynamic Equilibrium conditions and plasma homogeneity have been checked. Stark widths for 31 lines of Pb II have been measured. These lines measured in this work correspond to the transitions 7s → 6p, n(n = 8, 9, 10)s → 7p, n(n = 7, 8)p → 7s, n(n = 7, 8)p → 6p², n(n = 7, 8)d → 7p, n(n = 5, 6)f → 6d, n(n = 5, 6)f → 6p². The population level distribution and the corresponding temperatures were obtained using Boltzmann plots. The plasma electron densities were determined using well-known Stark broadening parameters of spectral lines. Special attention was dedicated to the possible self-absorption of the different transitions. Temporal evolution of the plasma parameters was studied between 0.1 and 9 μs. Stark broadening parameters of the spectral lines were measured at 2.5 μs where the electron temperature was close to 11,300 K and the electron density to 0.8 × 10¹⁶ cm^− 3. The experimental results obtained have been compared with the experimental and theoretical values given by other authors. A systematic trend of this parameter versus temperature of 4244.9 Å Pb II line has been presented.     

Lipase catalyzed enantioselective desymmetrization of a prochiral pentane-1,3,5-triol derivative

The enantioselective desymmetrization of the prochiral 3-O-silyl protected pentanetriol derivative 3 was carefully investigated. At −10 °C, the bacterial lipase from Burkholderia cepacia immobilized on ceramic particles led to monoacetate (S)-4 in 52% yield and >99.9% ee. At a reaction temperature of −40 °C the yield and enantioselectivity were even higher, but the reaction time was very long. Theoretical simulations of the reaction progress indicated an enantioselectivity of 25:1 at −10 °C and 35:1 at −40 °C. (S)-4 was converted into the enantiomerically pure building block 5-azidopentane-1,3-diol (S)-7 in two steps. The absolute configuration of (S)-7 was determined by exciton-coupled circular dichroism (ECCD) of diester (S)-8.     

Spectroscopic investigation of the interaction of p-benzoquinone with casein in the solid state

The reaction between p-benzoquinone (PBQ) and casein (protein) in the solid state was studied. After reaction with protein, the FT-IR spectra showed a new band at 1215 cm^?1, with an intense sign attributed for casein/PBQ product. An optimum amount of PBQ for determination of the product when mixed with casein was 100 mg and a reaction time of 30 min. The product was stable for a period of 24 h after the reacting by heating. The interaction of PBQ with casein was investigated by FT-IR, reflectance, Raman and EPR spectroscopies. The reaction between PBQ and casein in the solid state yields a radical species (p-benzosemiquinone) that it is stabilized by the presence of p-biphenolate and p-benzoquinone species in the solid state.