Nanosphere dispersion on a large glass substrate by low dose ion implantation for localized surface plasmon resonance

Dispersing nanospheres on a large glass substrate is the key to fabricate noble metal nanostructures for localized surface plasmon resonance through dispersed nanosphere lithography. This article reports that by modifying the glass surface with low dose ion implantation and successively dip coating the surface with poly(diallyldimethyl ammonium chloride) (PDDA), polystyrene or silica nanospheres can be dispersed on a large glass substrate. Investigation shows that several kinds of ions, such as silicon, boron, argon, and arsenic, can improve the nanosphere dispersion on glass, attributed to the ion bombardment-caused silicon increment. Ion implantation imposes no surface roughness or optical loss to the glass substrate, thus this method is suitable for localized surface plasmon resonance application. Experiments show silicon ion implantation can best disperse the nanospheres. For the gold nanostructures obtained by obliquely evaporating 30 nm of gold film onto the polystyrene nanospheres, which are dispersed on a silicon ion implanted glass substrate, a localized surface plasmon resonance sensitivity of 242 nm/RIU is achieved.     

Growth peculiarities during vapor–liquid–solid growth of silicon nanowhiskers by electron-beam evaporation

One-dimensional (1D) silicon (Si) nanostructures were grown by electron-beam evaporation catalyzed by gold nanoparticles on silicon substrates following the vapor–liquid–solid growth mechanism. We report three strikingly different growth morphologies of the 1D Si nanostructures and discuss their formation. The morphology of the silicon nanostructures strongly depends on gold layer thickness, annealing temperature before deposition and growth temperature during the deposition. The formation of nanoscale silicon features such as nanobelts, nanowires and nanowhiskers was observed. The nanoscale silicon features were characterized by transmission and scanning electron microscopy using imaging, diffraction and energy-dispersive X-ray spectroscopy, atomic force microscopy and UV micro-Raman spectroscopy. PACS 68.37.Lp; 68.70.+w; 78.30.-j; 81.15.Jj     

Improved surface-enhanced Raman scattering of patterned gold nanoparticles deposited on silicon nanoporous pillar arrays

Large-area silicon nanoporous pillar arrays (Si-NPA) uniformly coated with gold nanoparticles was synthesized, and surface-enhanced Raman scattering of rhodamine 6G adsorbed on these gold nanoparticles were studied and compared. It's found that Au/Si-NPA substrate has a significantly high Raman signal sensitivity and good homogeneity. These are attributed to gold nanoparticles with narrow particle-size distribution uniformly coated on the surface and to the enlarged specific surface area for adsorption of target molecules brought by the porous silicon pillars.     

Characterization and optimization of AuNPs labeled by Raman reporters on glass based on silver enhancement

In this report, gold nanoparticles (AuNPs) labeled by Raman reporters (AuNPs‐R6G) were assembled on glass and used as the seeds to in situ grow silver‐coated nanostructures based on silver enhancer solution, forming the nanostructures of AuNPs‐R6G@Ag, which were characterized by scanning electron microscopy (SEM) and UV‐visible spectroscopy. More importantly, the obtained silver‐coated nanostructures can be used as a surface enhancement Raman scattering (SERS) substrate. The different SERS activities can be controlled by the silver deposition time and assembly time of AuNPs‐R6G on glass. The results indicate that the maximum SERS activity could be obtained on AuNPs‐R6G when these nanostructures were assembled on glass for 2 h with silver deposition for 2 min. In addition, the reproducibility of SERS signal on the fabricated nanostructures is very high with the intensity error lower than 15%, which has great promise as a probe for application in bioanalysis. Copyright © 2008 John Wiley & Sons, Ltd.     

Dispersion of nanospheres on large glass substrate by amorphous or polycrystalline silicon deposition for localized surface plasmon resonance

Nanosphere lithography is a cost-effective way to fabricate noble metal nanostructures for plasmonics. However, dispersing nanospheres on a large area of glass substrate is a difficulty encountered when transparent substrate is required in applications such as localized surface plasmon resonance or surface enhanced Raman spectroscopy. Because poly(diallyldimethyl ammonium chloride) (PDDA) on silicon surface introduces a force that can disperse nanospheres on silicon, in this article, we modify the glass surface through amorphous or polycrystalline silicon deposition and thus well disperse polystyrene or silica nanospheres over a glass area of more than 2 cm × 2 cm. Transmission loss of the glass substrate caused by amorphous or polycrystalline silicon deposition is analyzed with good agreement to experimental spectra, and localized surface plasmon resonance signals generated from the gold nanostructures fabricated on these substrates are measured and yield a sensitivity of 317 nm/RIU, which prove the feasibility and effectiveness of our method.     

Influence of Morphological Homogeneity of Superspherical Gold Nanoparticles on Plasmonic Photothermal Heat Generation

The plasmonic photothermal (PPT) characteristics of gold nanostructures have been extensively investigated theoretically and experimentally due to their potential for use materials science and industry. The management of the size and shape of gold nanoparticles has been a key issue in the development of better solutions for PPT heat generation because their size and shape determine their resultant photothermal properties. However, the light absorption of gold nanostructures is mainly dependent on the wavelength and orientation of the incident light; hence, maintaining uniform size and shape is critical for achieving maximum photothermal energy. Morphologically homogeneous spherical gold nanoparticles, or super gold nanospheres prepared by slowly etching uniform octahedral gold nanoparticles, demonstrate better PPT heat generation compared with commercially available nonsmooth gold nanoparticles (GNSs). The PPT heating experiments show a maximum temperature difference of 5.7 °C between the super and ordinary GNSs with the same average maximum Feret's diameters, which result from the more efficient PPT heat power generation (20.6%) of the super GNSs. In an electromagnetic‐wave simulation, the super GNSs show lower polarization dependence and a 24.6% higher absorption cross‐section than ordinary GNSs.     

Femtosecond and nanosecond laser fabricated substrate for surface-enhanced Raman scattering

We report a simple and repeatable method for fabricating a large-area substrate for surface-enhanced Raman scattering. The substrate was processed by three steps: (i) femtosecond (fs) laser micromachining and roughening, (ii) thin-film coating, and (iii) nanosecond laser heating and melting. Numerous gold nanoparticles of various sizes were created on the surface of the silicon substrate. The 3D micro-/nanostructures generated by the fs laser provide greater surface areas with more nanoparticles leading to 2 orders of magnitude higher of the enhancement factor than in the case of a flat substrate. Using an He-Ne laser with a 632.8?nm excitation wavelength, the surface-enhanced Raman scattering enhancement factor for Rhodamine 6G was measured up to 2×10(7).     

金纳米颗粒阵列基底的化学置换制备及其表面增强拉曼散射特性研究

表面增强拉曼(SERS)作为一种分析手段,具有高灵敏度、高选择性、高重复性、非破坏性等优点,在过去的几十年中,被广泛应用在成分检测、环境科学、生物医药及传感器等领域。其中以金、银等贵金属纳米颗粒薄膜在表面增强拉曼(SERS)活性基底方面得到了更为广泛的应用。SERS技术一个关键的因素是如何制设计并备具有大面积、高增强能力及高重复性、可循环使用的SERS基底。通常,贵金属纳米颗粒规则阵列结构的单元颗粒电磁增强特性及其颗粒间的电磁耦合增强特性的综合作用可大力提升SERS基底的探测性能。然而,利用传统微纳米加工方法如光刻、电子束光刻等方法制备得到的贵金属纳米阵列结构的表面粗糙度不够理想。结合光刻与化学置换方法制备金纳米颗粒四方点阵列孔洞结构,并研究其作为SERS基底的电磁增强特性。具体研究利用光刻法在硅衬底上制备了规则排列的四方点阵列孔洞结构,用磁控溅射在其表面镀上金属铁膜;接着在衬底上旋涂浓度为1.893 8 mol·L-1的氯金酸液膜,在孔洞内铁和氯金酸发生置换反应,进而孔洞生成金纳米颗粒,最终得到金纳米颗粒四方点阵SERS活性基底。采用罗丹明6G(R6G)分子作为探测分子测试不同金纳米颗粒阵列结构基底的SERS谱。实验结果表明,随着化学置换反应时间的延长,金纳米颗粒排列更加紧凑有序,SERS谱增强性能更好。     

纳米结构Si表面增强拉曼散射特性研究

为了实现低成本高灵敏度的表面增强拉曼散射效应,制备了一种基于硅表面纳米结构的表面增强拉曼散射效应（SERS）衬底。首先利用低能反应离子注入的方法对单晶硅进行表面处理,制作高陡值度的墙壁结构。然后采用电子束蒸发的方式在硅片表面蒸镀银膜,高密度的银纳米点阵列出现在侧壁表面,形成大量的热点。实验采用罗丹明6G（R6G）作为探针分子进行表征,发现获得最强拉曼信号的银膜厚度为40 nm,R6G的探测极限能达到10^-14 mol/L;同时分析衬底的重复性和稳定性,发现在614 cm^-1和1 650 cm^-1处的拉曼信号特征峰的相对标准偏差分别达到12.3%和14.3%,保存一个月的衬底测得的拉曼信号强度保持不变。本研究提供了一种操作简单、成本低的制备高灵敏度增强拉曼效应衬底的方法,制备的衬底具有高信号可重复性和高稳定性的优点。     

Fabrication and characterization of amorphous silica nanostructures

Large-scale amorphous silica nanostructures, including nanowires, nanotubes and flowerlike nanowire bunches depending on the position, have been fabricated on silicon wafer through a cheap route under the assistance of gold and germanium. Accompanying the observation of blue-green light emission, comprehensive micro-structural characterization reveals that the growth of nanostructures is catalyzed only by gold whereas the final morphology of nanostructures depends on the location to germanium ball. Au₂Si, a compound of gold and silicon, is also disclosed as an intermediate state during the catalysis. Correspondingly, a growth scheme is proposed based on the experimental results and the vapor-liquid-solid mechanism.     

Gold nanostructures on chemically reinforced PDMS microwell arrays

This paper describes a facile strategy for fabricating arrays of two- and three-dimensional gold nanostructures using PDMS-infiltrated polystyrene (PS) colloidal crystals. PDMS molding of colloidal crystal, gold vapor deposition, and subsequent calcination of PS produced gold thin layers over hexagonal PDMS microwell arrays with hemispherical air-voids of approximately 140 nm on glass substrates. Vapor deposition of perfluoroalkylsilane thin layers improved the thermal stability of the colloidal template over 100 °C, providing a route to preparation of hollow architectures with gold thin layers supported by PDMS nanostructures. Surface modification of the PDMS using poly(allylamine hydrochloride) induced two-dimensional colloidal crystals of PS and PMMA spheres through electrostatic interactions. Particle aggregation of 13 nm gold nanoparticles in the PDMS microwells demonstrated a surface plasmon resonance band red-shifted to 810 nm, in comparison with that on the flat surface at 720 nm.     

Multimillion Atom Molecular Dynamics Simulations of Nanostructures on Parallel Computers

Scalable space–time multiresolution algorithms implemented on massively parallel computers enable large-scale molecular dynamics (MD) simulations involving up to a billion atoms. Multimillion atom MD simulations are performed to study critical issues in the area of structural and dynamical correlations in nanostructures. Our simulation research is focused on a few semiconductor, ceramic, and metallic nanostructures. These nanostructures systems include: nanometer-scale stress patterns in silicon/silicon nitride nanopixels; self-limiting growth and critical lateral sizes in gallium arsenide/indium arsenide nanomesas; structural transformation in colloidal semiconductor nanocrystals; nanoindentation of crystalline and amorphous silicon nitride films; and dynamics of oxidation of metallic aluminum nanoparticles.     

Self‐Assembled Silver–Gold Nanoisland Films on Glass for SERS Applications

We present a study of resonant optical properties of gold‐protected silver nanoisland films. Silver nanoislands were grown on a glass substrate using out‐diffusion technique, the growth was followed by the deposition of nanometer‐thick gold coatings. Scanning electron microscopy and optical spectroscopy were used to characterize morphology and extinction spectra of the grown combined silver–gold nanostructures. Micro Raman spectroscopy of the combined nanoislands has demonstrated their signal enhancement factor exceeding that one of the initial silver nanoislands.     

玻璃基底上不规则银纳米结构的生长及其光学性质的研究

以经过硅烷化后玻璃片为基底，之后吸附金纳米种子，采用柠檬酸钠为还原剂，在荧光灯照射条件下还原硝酸银，制备出基底表面具有银纳米粒子聚集结构的材料。采用透射电镜、扫描电镜和紫外可见分光光度计对产物的形貌和性质进行了表征，并考察银纳米粒子的形貌对其薄膜基底SERS活性的影响。结果表明：随着光照时间增加至16 h，金种子长大为平均粒径110 nm的不规则状多晶银纳米粒子，且出现双层粒子堆积。基底上纳米粒子的吸收光谱上出现了由银粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰：随着光照时间的变化，耦合峰在600～813 nm波段内移动。光照时间为12 h后得到的SERS活性基底具有最强的SERS信号。     

Uniform plasmonic near-field nanopatterning by backward irradiation of femtosecond laser

We present localized optical field distribution properties in the vicinity of gold particles on a silicon substrate by backward and forward irradiation. It is technically difficult to fabricate nanostructures on the surface by a conventional forward laser incident to the substrate because gold nanoparticles easily aggregate to form double-layered particle arrays. We calculated enhanced optical field properties in order to pattern the substrate surface only with a template of the bottom-layered particle arrays in the case that the backward irradiation of a femtosecond laser is used in the system of aggregated double-layered gold nanoparticle arrays. With the backward irradiation, the optical field intensity in the substrate for the double-layered hexagonal arrays is found to be only 30% lower than the mono-layered system. Moreover, a near field cannot be generated with the forward irradiation. As a result, only the backward irradiation scheme is found to be effective for uniform surface nanopatterning at enhanced plasmonic near-field zones.     

玻璃基底上不规则银纳米结构的生长及其光学性质的研究

以经过硅烷化后玻璃片为基底,之后吸附金纳米种子,采用柠檬酸钠为还原剂,在荧光灯照射条件下还原硝酸银,制备出基底表面具有银纳米粒子聚集结构的材料。采用透射电镜、扫描电镜和紫外可见分光光度计对产物的形貌和性质进行了表征,并考察银纳米粒子的形貌对其薄膜基底SERS活性的影响。结果表明：随着光照时间增加至16 h,金种子长大为平均粒径110 nm的不规则状多晶银纳米粒子,且出现双层粒子堆积。基底上纳米粒子的吸收光谱上出现了由银粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰：随着光照时间的变化,耦合峰在600～813 nm波段内移动。光照时间为12 h后得到的SERS活性基底具有最强的SERS信号。     

Nucleation of Polypropylene Crystallization with Gold Nanoparticles. Part 2: Relation between Particle Morphology and Nucleation Activity

The influence of gold nanoparticle morphology on nucleation of isotactic polypropylene (PP) crystallization was investigated. Previous experiments indicated certain nucleation activity of gold nanoparticles, varying with their size. In this work, eight types of gold micro/nanoparticles were used: vacuum-sputtered nanostructures (nanoparticles, nanoislands, and nanolayers), chemically prepared isometric gold nanocrystals (5, 20, and 100 nm diameters), and two types of gold microcrystals with well-developed crystal facets [with (100) and (111) facets, respectively]. To minimize the effect of particle agglomeration, we used our recently introduced sandwich method, in which the nucleating agent was deposited between thin PP films and the nucleation was evaluated by polarized light microscopy (PLM), X-ray scattering (WAXS), and differential scanning calorimetry (DSC). The nucleation activity of Au particles in PP was lower than it might be expected from the previous studies and depended on their morphology. The nucleation activity of Au microcrystals with well-developed facets was higher than the activity of non-faceted Au nanocrystals.     

Plasmon-enhanced fluorescence near metallic nanostructures: biochemical applications

Amplification of fluorescence is a nanoscale phenomenon which is particularly pronounced in close proximity to metal nanostructures. Due to its sharp distance dependence, it is ideally suited to monitor biorecognition reactions. Using this effect we have been able to demonstrate ultrasensitive bioassays. Two types of metal nanostructures have been employed, nanometric silver islands deposited over an ultrathin metal mirror and silver fractal structures. For the first type, metal mirrors (aluminum, gold, or silver protected with a thin silica layer) were coated with SIFs and an immunoassay (model assay for rabbit IgG or myoglobin immunoassay) was performed on this surface using fluorescently labeled antibodies. Our results show that SIFs alone (on a glass surface not coated with metal) enhance the immunoassay signal approximately 3 to 10-fold. Using a metal mirror instead of glass as support for SIFs leads to up to 50-fold signal enhancement. The second type of metal nanostructures, silver fractals, were produced by electrochemical reduction of silver nitrate deposited on sapphire covered with a thin conductive film of indium tin oxide. These structures were used as a substrate for a model rabbit IgG bioassay. The fluorescence resulting from the binding of antibody labeled with Rhodamine was highly nonuniform with distinctive hot spots. These highly fluorescent regions were correlated with areas of higher Ag thickness and coverage. Such high values of fluorescence amplification in both types of nanostructures have been interpreted by using time-resolved fluorescence data and by considering the radiative properties of plasmons in the environments which promote plasmon coupling. PACS 87.64.Ni; 81.07.-b; 87.14.-g     

Study of tryptophan assisted synthesis of gold nanoparticles by combining UV–Vis, fluorescence, and SERS spectroscopy

We developed a rapid and non-toxic method for the preparation of colloidal gold nanoparticles (GNPs) by using tryptophan (Trp) as reducing/stabilizing agent. We show that the temperature has a major influence on the kinetics of gold ion reduction and the crystal growth, higher temperatures favoring the synthesis of anisotropic nanoparticles (triangles and hexagons). The as-synthesized nanostructures were characterized by UV–Vis absorption spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), fluorescence, and surface-enhanced Raman scattering (SERS) spectroscopy. The UV–Vis measurements confirmed that temperature is a critical factor in the synthesis process, having a major effect on the shape of the synthesized GNPs. Moreover, fluorescence spectroscopy was able to monitor the quenching of the Trp fluorescence during the in situ synthesis of GNPs. Using Trp as molecular analyte to evaluate the SERS efficiency of as-prepared GNPs at different temperatures, we demonstrated that the Raman enhancement of the synthesized gold nanoplates is higher than that of the gold spherical nanoparticles.     

Seed-mediated shape evolution of gold nanomaterials: from spherical nanoparticles to polycrystalline nanochains and single-crystalline nanowires

We studied the kinetics of the reduction of a gold precursor (HAuCl₄) and the effect of the molar ratio (R) of sodium citrate, which was introduced from a seed solution, and the gold precursor on the shape evolution of gold nanomaterials in the presence of preformed 13 nm gold nanoparticles as seeds. The reduction of the gold precursor by sodium citrate was accelerated due to the presence of gold seeds. Nearly single-crystalline gold nanowires were formed at a very low R value (R = 0.16) in the presence of the seeds as a result of the oriented attachment of the growing gold nanoparticles. At a higher R value (R = 0.33), gold nanochains were formed due to the non-oriented attachment of gold nanoparticles. At a much higher R value (R = 1.32), only larger spherical gold nanoparticles grown from the seeds were found. In the absence of gold seeds, no single-crystalline nanowires were formed at the same R value. Our results indicate that the formation of the 1D nanostructures (nanochains and nanowires) at low R values is due to the attachment of gold nanoparticles along one direction, which is driven by the surface energy reduction, nanoparticle attraction, and dipole–dipole interaction between adjacent nanoparticles.