共查询到20条相似文献,搜索用时 15 毫秒
1.
An exact analytic solution is found to the following plane hydrodynamic problem. An unbounded flow of an ideal incompressible fluid flows around a plate BB' placed at right angles to the velocity vector of the flow at infinity. The pressure on the free boundary P is equal to the pressure in the flow. From an opening in the center of the plate, a jet with flow rate Q from a cavity with pressure P0 encounters the flow head-on. As a result of the solution, it is found that for fixed width of the opening the values of Q allowed by the scheme are limited. In the limiting case Q = 0 Chaplygin's flow is obtained with stagnation region at the front [1], and in the limiting case Q = Qmax a jet out of a cavity with pressure P0 into a cavity with pressure P. As Q varies in this interval, the total drag, regarded as the drag of the plate and the chamber from which the jet emerges, takes a minimal value at a certain point. If the width of the opening tends to the length of the slab, the problem of the collision of two jets is obtained; if the width of the opening tends to zero (Q o), the problem of jet flow past a slab with a source is obtained. It is shown that the replacement of the jet by the source gives a good approximation in both the sense of the force characteristics and in the sense of the behavior of the free streamlines.Translated from Izvestiya Akademii Nauk SSSR, Hekhanika Shidkosti i Gaza, No. 5, pp. 47–54, September–October, 1979.We thank L. I. Sedov for his interest in the work and G. Yu. Stepanov for proposing the method of solution and for a helpful discussion. 相似文献
2.
The problem of the interaction of a crack and a dislocation in a medium with a nonlinear stress-strain law is considered for the case of a semi-infinite crack in a displacement loaded strip under longitudinal shear deformation. A power law stress-strain relation is considered and the dislocation is assumed positioned so that the net effect of its interaction with the crack is to produce a zero stress intensity factor when combined with the effect of the applied displacements. Thus the Atkinson-Kay superdislocation model of a relaxed crack tip is extended to the situation where the material satisfies a power-law stress-strain relationship. 相似文献
3.
The dynamics of a cylindrical cavity in a liquid with no allowance for vertical displacement are considered in [1–3]. The present study investigates the pulsation motion of a cylindrical cavity near a free boundary of a liquid, allowing for displacement of the axis of the cavity in the vertical direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 173–176, November–December, 1988. 相似文献
4.
A flow pattern created by the interaction of a supersonic flow with a transverse sonic or supersonic jet injected normally to the direction of the main flow through a circular aperture in a plate is considered. The pressure rises in front of the jet owing to the retarding action of the incident flow. The boundary layer building up on the wall in front of the injection nozzle is accordingly detached. The flow pattern in the region of interaction between the jet and the external flow is illustrated in Fig. 1. The three-dimensional zone of detachment thus formed deflects the incident flow from the wall, and in front of the jet a complicated system of sharp jumps in contraction develops. A three-dimensional system of jumps also develops in the jet itself.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No, 5, pp. 193–197, September–October, 1970. 相似文献
5.
A. V. Pogorelova V. M. Kozin V. L. Zemlyak 《Journal of Applied Mechanics and Technical Physics》2012,53(1):27-37
This paper studies the three-dimensional unsteady problem of the hydroelastic behavior of a floating infinite plate under
the impact of waves generated by horizontal rectilinear motion of a slender solid in a fluid of infinite depth. An analytic
solution of the problem is found based on the known solutions for the unsteady motion of a point source of mass in a fluid
of infinite depth under a floating plate. Asymptotic formulas are obtained which model the motion of a solid slender body
in a fluid by replacing the body with a source-sink system. These formulas are used to numerically analyze the effect of plate
thickness, depth of the body, its dimensions and the velocity of rectilinear motion on the amplitude of deflection of the
floating plate. The motion of a submarine under a nonbreakable plate was modeled experimentally. Theoretical and experimental
data are in good agreement. 相似文献
6.
7.
Summary The electro-elastic interaction of a screw dislocation and a notch in a piezoelectric bi-material is analyzed. The electro-elastic fields induced by the dislocation are derived using the conformal mapping and the image-dislocation approach, where the solution for a piezoelectric bi-material without a notch is used as a base. The stress and the electric displacement intensity factors of the notch and the image force on the dislocation are given explicitly. We find that intensity factors are expressed in terms of the effective material constants, while the radial component of the image force is independent of the notch angle and the angular position of the dislocation in the polar coordinate system. Numerical results for the image force are provided for the use when one of the two media is purely elastic. They illustrate the behavior of the dislocation in the neighborhood of the notch. 相似文献
8.
A straightline unsteady motion of a load over a floating elastic sheet in a pool whose depth changes in the direction of load motion is studied. The influence of the pool depth, sheet thickness, load size and intensity, and velocity of uniform motion on the amplitude and maximum deflection of the sheet is analyzed. 相似文献
9.
S. N. Bagir-zade G. P. Guseinov 《Journal of Applied Mechanics and Technical Physics》1973,14(6):832-838
A study is made of the motion of a liquid toward a well with a hemispherical end-face with unsteady-state spherical-radial filtration in a fractured-porous stratum consisting of hemispherical regions with different values of the permeability of the system of cracks, superposed one on another. A Laplace transform is used to find exact solutions to the problem of the lowering of the stratum pressure as a function of time and distance as well as of the output of a well working with a constant end-face pressure. The article discusses partial cases corresponding to the exploitation of closed and bounded open fractured-porous strata by a central well with a hemispherical end-face. On the basis of numerical calculations, the effect of the parameters of fractured-porous strata on the change in the indices of the process of their exploitation is established. It is established that, with the exploitation of fractured-porous strata, the process of the lowering of the end-face pressure of the well and its output become stabilized with sufficiently large values of the time.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 115–123, November–December, 1973. 相似文献
10.
L. A. Tkacheva 《Fluid Dynamics》2013,48(3):352-365
The problem of the impact of a body with a plane bottom (of the type of a box) on a thin liquid layer at a small angle is solved in the two-dimensional formulation. The nonlinear shallow water equations are used, together with the method of matched asymptotic expansions. It is found that at certain values of the input parameters of the problem the liquid pressure diminishes near the lower end of the body and becomes smaller than the atmospheric pressure, which results in liquid separation from the box bottom. The numerical results show that all input parameters of the problem have a considerable effect on the nature of body motion. The liquid separation effect on body motion is analyzed. 相似文献
11.
S. V. Sukhinin 《Journal of Applied Mechanics and Technical Physics》1998,39(2):228-238
Acoustic eigenoscillations of a gas near a plate in a rectangular channel, i.e., the eigenfrequency of oscillations as a function
of the chord length and the position of the plate in the channel, and the form of the eigenfunctions are studied in a two-dimensional
formulation. A mathematical model of eigenoscillations near a plate in a channel has been proposed and substantiated, and
the dependence of the eigenfrequency of oscillations on the geometric parameters is studied numerically with the use of this
model.
Lavrent'ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from
Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 39, No. 2, pp. 78–90, March–April, 1998. 相似文献
12.
A new method of pumping a fluid through a microchannel device using a gas bubble-piston, set in motion by the thermocapillary force induced by a light beam, is proposed. To demonstrate the method, a model micropump has been assembled. The model consists of two reservoirs connected by two channels with a bubble-piston driven by a light beam. The pumping rate and the volume per piston stroke are evaluated experimentally. The method proposed is compared with known microfluid pumping methods. Some advantages of the new method are indicated. 相似文献
13.
Torsion problems for a cylinder with a rectangular hole and a rectangular cylinder with a crack 总被引:1,自引:0,他引:1
Using the method of singular integral equation and the crack-cutting technique, the rigorous solutions are obtained for a
cylinder with a rectangular hole and a rectangular cylinder with a crack, which exactly satisfy the boundary conditions and
the conditions at the corner points. After that the torsional rigidities and the stress intensity factors at the crack tip
are determined. Next, for the doubly connected circular cylinder with a rectangular hole the expressions for the singular
stresses around the concave corner points are derived and the generalized stress intensity factors are then defined. Since
the crack-cutting technique is used in this paper, the solution of the matching rectangular cylinder is also obtained and
its numerical results coincide with those in references. Thus the method proposed here is verified.
The project supported by National Natural Science Foundation of China 相似文献
14.
A. P. Markeev 《Mechanics of Solids》2016,51(6):623-631
We solve a nonlinear orbital stability problem for a periodic motion of a homogeneous paraboloid of revolution over an immovable horizontal plane in a homogeneous gravity field. The plane is assumed to be absolutely smooth, and the body–plane collisions are assumed to be absolutely elastic. In the unperturbed motion, the symmetry axis of the body is vertical, and the body itself is in translational motion with periodic collisions with the plane.The Poincare´ section surfacemethod is used to reduce the problemto studying the stability of a fixed point of an area-preserving mapping of the plane into itself. The stability and instability conditions are obtained for all admissible values of the problem parameters. 相似文献
15.
The problem of the motion of a swirling flow in an axisymmetric channel with permeable walls is investigated numerically. Various flow regimes including those with the formation of recirculation zones are obtained. The problem of atomization of a powder by a swirling flow for the purpose of obtaining a finely dispersed mixture is considered. Particle concentration distributions in the flow are calculated, the formation of characteristic deposition zones is demonstrated, and the unsteady process of particle transfer is investigated with allowance for deposition on the lateral surface of the channel. 相似文献
16.
An experimental investigation is conducted of the propagation and mixing of a transverse sonic jet injected into a supersonic gas stream through a circular hole in a plate. The picture of the interaction at the initial section of the injected jet is examined in the majority of papers devoted to this question [1–3]. The aim of this paper is to investigate the mixing of the injected jet with the free stream, and to establish criteria governing the jet insertion and mixing processes. 相似文献
17.
N. Phan-Thien 《Rheologica Acta》1985,24(2):119-126
The paper reports an exact kinematics for the squeezing flow from a cone of a general viscoelastic fluid. To obtain numerical values for the stresses, a network model that allows stress overshoot and shear-thinning in the start-up of a shear flow is adopted. Both these features are important in this flow. For the special case of an Oldroyd-B fluid it is shown that there is a limiting Weissenberg number above which at least one component of the stresses increases unboundedly with time. 相似文献
18.
The plane problem of the immersion of a cylinder in a fluid in a cylindrical cavity whose radius varies with time is considered. The dependence of the wetted width of the circle submerged on the submergence for various gaps is determined. The results obtained are compared with asymptotic dependencies. 相似文献
19.
S. P. Aktershev S. V. Alekseenko 《Journal of Applied Mechanics and Technical Physics》2013,54(2):185-194
A new model is developed for describing long-wave perturbations in a falling film of a viscous liquid. The model is based on an integral approach and an expansion of the velocity profile into a series in linearly independent basis functions of a boundary-value problem. A linear analysis of film flow stability is performed, and dispersion dependences are obtained. Results predicted by the new model are demonstrated to be in good agreement with available experimental data on the film flow over a gently sloping surface. 相似文献
20.
The problem of the ignition of a moving homogeneous gaseous combustible mixture in a boundary layer along a heated flat semiinfinite plate is one of the main problems of the ignition of a combustible mixture in a flow (for example, [1]). The formulation of the problem includes the two-dimensional equations of motion and the equations of the transfer of heat and of the reacting substance, written taking a chemical reaction into consideration, as well as boundary conditions, and should lead to determination of the steady-state fields of the concentration and the temperature and, by the same token, of the position of the combustion zone. Different approximate numerical solutions of the problem were analyzed in [1–5]. One of the most important characteristics of the process is the length of the ignition, i.e., the distance from the edge of the plate to the point at which, thanks to the intrinsic chemical heat evolution in the gas, the heat flux from the plate to the gas becomes equal to zero. In the present work, for the case of large values of the activation energy of the chemical reaction and a sufficiently great temperature difference between the wall and the flow, an approximate expression is obtained for the length of the ignition.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 142–148, September–October, 1977.The authors thank V. M. Shevtsov for his aid in making the calculations. 相似文献