Pt/oxide nanocatalysts synthesized via the ultrasonic spray pyrolysis process: engineering metal–oxide interfaces for enhanced catalytic activity

We show that Pt nanoparticles synthesized on oxide nanocatalysts exhibit catalytic activity enhancement depending on the type of the oxide support. To synthesize the Pt/oxide nanocatalysts, we employed a versatile synthesis method using Pt nanoparticles (NPs) supported on various metal oxides (i.e., SiO₂, CeO₂, Al₂O₃, and FeAl₂O₄) utilizing ultrasonic spray pyrolysis. Catalytic CO oxidation was carried out on these catalysts, and it was found that the catalytic activity of the Pt NPs varied depending on the supporting oxide. While Pt/CeO₂ exhibited the highest metal dispersion and active surface area, Pt/FeAl₂O₄ exhibited the lowest active surface area. Among the Pt/oxide nanocatalysts, Pt NPs supported on CeO₂ showed the highest catalytic activity. We ascribe the enhancement in turnover frequency of the Pt/CeO₂ nanocatalysts to strong metal–support interactions due to charge transport between the metal catalysts and the oxide support. Such Pt/oxide nanocatalysts synthesized via spray pyrolysis offer potential possibilities for large-scale synthesis of tailored catalytic systems for technologically relevant applications.     

Rational design of interfacial properties of ferric (hydr)oxide nanoparticles by adsorption of fatty acids from aqueous solutions

Notwithstanding the great practical importance, still open are the questions how, why, and to what extent the size, morphology, and surface charge of metal (hydr)oxide nanoparticles (NPs) affect the adsorption form, adsorption strength, surface density, and packing order of organic (bio)molecules containing carboxylic groups. In this article, we conclusively answer these questions for a model system of ferric (hydr)oxide NPs and demonstrate applicability of the established relationships to manipulating their hydrophobicity and dispersibility. Employing in situ Fourier transform infrared (FTIR) spectroscopy and adsorption isotherm measurements, we study the interaction of 150, 38, and 9 nm hematite (α-Fe(2)O(3)) and ～4 nm 2-line ferrihydrite with sodium laurate (dodecanoate) in water. We discover that, independent of morphology, an increase in size of the ferric (hydr)oxide NPs significantly improves their adsorption capacity and affinity toward fatty acids. This effect favors the formation of bilayers, which in turn promotes dispersibility of the larger NPs in water. At the same time, the local order in self-assembled monolayer (SAM) strongly depends on the morphological compatibility of the NP facets with the geometry-driven well-packed arrangements of the hydrocarbon chains as well as on the ratio of the chemisorbed to the physically adsorbed carboxylate groups. Surprisingly, the geometrical constraints can be removed, and adsorption capacity can be increased by negatively polarizing the NPs due to promotion of the outer-sphere complexes of the fatty acid. We interpret these findings and discuss their implications for the nanotechnological applications of surface-functionalized metal (hydr)oxide NPs.     

A novel route to obtain metal and oxide nanoparticles co-existing on a substrate

In this work we present a novel route to cover large surfaces with metal and oxide nanoparticles (NPs) by growing and annealing of metallic bilayers. We have used this method to fabricate ensembles of Au and α-Fe₂O₃ NPs on silica substrates from Fe/Au bilayers. The morphology of the hybrid nanostructures and the presence of defects and disorder can be tuned through the processing parameters as the initial film thickness and the annealing conditions. The proximity effects between both types of NPs alter their physical properties. In particular, we observe that the presence of α-Fe₂O₃ NPs modifies the surface plasmon resonance of Au NPs.     

Ligand‐Assisted Co‐Assembly Approach toward Mesoporous Hybrid Catalysts of Transition‐Metal Oxides and Noble Metals: Photochemical Water Splitting

A bottom‐up synthetic approach was developed for the preparation of mesoporous transition‐metal‐oxide/noble‐metal hybrid catalysts through ligand‐assisted co‐assembly of amphiphilic block‐copolymer micelles and polymer‐tethered noble‐metal nanoparticles (NPs). The synthetic approach offers a general and straightforward method to precisely tune the sizes and loadings of noble‐metal NPs in metal oxides. This system thus provides a solid platform to clearly understand the role of noble‐metal NPs in photochemical water splitting. The presence of trace amounts of metal NPs (≈0.1 wt %) can enhance the photocatalytic activity for water splitting up to a factor of four. The findings can conceivably be applied to other semiconductors/noble‐metal catalysts, which may stand out as a new methodology to build highly efficient solar energy conversion systems.     

Direct Photocatalysis for Organic Synthesis by Using Plasmonic‐Metal Nanoparticles Irradiated with Visible Light

Recent advances in direct‐use plasmonic‐metal nanoparticles (NPs) as photocatalysts to drive organic synthesis reactions under visible‐light irradiation have attracted great interest. Plasmonic‐metal NPs are characterized by their strong interaction with visible light through excitation of the localized surface plasmon resonance (LSPR). Herein, we review recent developments in direct photocatalysis using plasmonic‐metal NPs and their applications. We focus on the role played by the LSPR of the metal NPs in catalyzing organic transformations and, more broadly, the role that light irradiation plays in catalyzing the reactions. Through this, the reaction mechanisms that these light‐excited energetic electrons promote will be highlighted. This review will be of particular interest to researchers who are designing and fabricating new plasmonic‐metal NP photocatalysts by identifying important reaction mechanisms that occur through light irradiation.     

Mild Synthesis of Pt/SnO2/Graphene Nanocomposites with Remarkably Enhanced Ethanol Electro‐oxidation Activity and Durability

We have designed a new Pt/SnO₂/graphene nanomaterial by using L ‐arginine as a linker; this material shows the unique Pt‐around‐SnO₂ structure. The Sn²⁺ cations reduce graphene oxide (GO), leading to the in situ formation of SnO₂/graphene hybrids. L ‐Arginine is used as a linker and protector to induce the in situ growth of Pt nanoparticles (NPs) connected with SnO₂ NPs and impede the agglomeration of Pt NPs. The obtained Pt/SnO₂/graphene composites exhibit superior electrocatalytic activity and stability for the ethanol oxidation reaction as compared with the commercial Pt/C catalyst owing to the close‐connected structure between the Pt NPs and SnO₂ NPs. This work should have a great impact on the rational design of future metal–metal oxide nanostructures with high catalytic activity and stability for fuel cell systems.     

Pd nanoparticles on defective polymer carbon nitride: Enhanced activity and origin for electrocatalytic hydrodechlorination reaction

Here we report a facile defect-engineering strategy on the support to optimize the metal-support interaction and enhance the metal’s electrocatalytic hydrodechlo rination perfo rmance in converting 2,4-dichlorophenol(2,4-DCP) to phenol.The specific activity of the Pd nanoparticles(Pd NPs) on defective polymer carbon nitride(Pd/PCN-x) reaches 0.09 min^-1 m^-2_Pd,which is 1.5 times that of the Pd NPs supported on the perfect PCN(Pd/PCN-0).The combined experimental and...     

Tuning the High‐Temperature Wetting Behavior of Metals toward Ultrafine Nanoparticles

The interaction between metal nanoparticles (NPs) and their substrate plays a critical role in determining the particle morphology, distribution, and properties. The pronounced impact of a thin oxide coating on the dispersion of metal NPs on a carbon substrate is presented. Al₂O₃‐supported Pt NPs are compared to the direct synthesis of Pt NPs on bare carbon surfaces. Pt NPs with an average size of about 2 nm and a size distribution ranging between 0.5 nm and 4.0 nm are synthesized on the Al₂O₃ coated carbon nanofiber, a significant improvement compared to those directly synthesized on a bare carbon surface. First‐principles modeling verifies the stronger adsorption of Pt clusters on Al₂O₃ than on carbon, which attributes the formation of ultrafine Pt NPs. This strategy paves the way towards the rational design of NPs with enhanced dispersion and controlled particle size, which are promising in energy storage and electrocatalysis.     

Controllable metal-enhanced fluorescence in organized films and colloidal system

In recent years, considerable efforts have been devoted to better understand the unique emission properties of fluorophores enhanced by the localized surface plasmon resonance of metal nanoparticles (NPs), due to the widespread applications of fluorescence techniques. It is demonstrated by experiment and theoretical calculation that the enhancement efficiency strongly depends on the morphology of the metal NPs, the spectral overlap between metal and fluorophores, the separation distance between them, and other factors. Among these aspects to be considered are suitable spacer material and assembling methods to control the spatial arrangement of plasmonic NPs and fluorophore with proper optical properties and interactions. In this contribution, we provide a brief overview on recent progress of metal-enhanced fluorescence in organized films and colloidal systems.     

Biogenic Synthesis of CuO,ZnO, and CuO–ZnO Nanoparticles Using Leaf Extracts of Dovyalis caffra and Their Biological Properties

Biogenic metal oxide nanoparticles (NPs) have emerged as a useful tool in biology due to their biocompatibility properties with most biological systems. In this study, we report the synthesis of copper oxide (CuO), zinc oxide (ZnO) nanoparticles (NPs), and their nanocomposite (CuO–ZnO) prepared using the phytochemical extracts from the leaves of Dovyalis caffra (kei apple). The physicochemical properties of these nanomaterials were established using some characterization techniques including X-ray diffraction analysis (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). The XRD result confirmed the presence of a monoclinic CuO (Tenorite), and a hexagonal ZnO (Zincite) nanoparticles phase, which were both confirmed in the CuO–ZnO composite. The electron microscopy of the CuO–ZnO, CuO, and ZnO NPs showed a mixture of nano-scale sizes and spherical/short-rod morphologies, with some agglomeration. In the constituent’s analysis (EDX), no unwanted peak was found, which showed the absence of impurities. Antioxidant properties of the nanoparticles was studied, which confirmed that CuO–ZnO nanocomposite exhibited better scavenging potential than the individual metal oxide nanoparticles (CuO, and ZnO), and ascorbic acid with respect to their minimum inhibitory concentration (IC₅₀) values. Similarly, the in vitro anticancer studies using MCF7 breast cancer cell lines indicated a concentration-dependent profile with the CuO–ZnO nanocomposite having the best activity over the respective metal oxides, but slightly lower than the standard 5-Fluorouracil drug.     

Hyperbranched polyglycidol assisted green synthetic protocols for the preparation of multifunctional metal nanoparticles

Biocompatible hyperbranched polyglycidol (HBP) has been demonstrated to be an effective reducing and stabilizing agent for the synthesis of highly water-soluble monometallic (Au, Ag, Pt, Pd, and Ru) and bimetallic (Au/Pt, Au/Pd, and Au/Ru) nanoparticles (NPs), which provides a general and green protocol to fabricate metal NPs. The HBP-assisted reduction of metal ions follows an analogous polyol process. The reduction reaction rate increases sharply by increasing the temperature and the molecular weight of HBP. The size of NPs is controllable simply by changing the concentration of the metal precursor. High molecular weight HBP is favorable for the formation of NPs with uniform size and improved stability. By utilizing hydroxyl groups in the HBP-passivation layer of Au NPs, TiO(2)/Au, GeO(2)/Au, and SiO(2)/Au nanohybrids are also fabricated via sol-gel processes, which sets a typical example for the creation of versatile metal NPs/inorganic oxide hybrids based on the as-prepared multifunctional NPs.     

Synthesis and Biological Evaluation of PEGylated MWO4 Nanoparticles as Sonodynamic AID Inhibitors in Treating Diffuse Large B-Cell Lymphoma

Sonodynamic therapy (SDT) triggered by ultrasound (US) has attracted increasing attention owing to its ability to overcome critical limitations, including low tissue-penetration depth and phototoxicity in photodynamic therapy (PDT). Biogenic metal oxide nanoparticles (NPs) have been used as anti-cancer drugs due to their biocompatibility properties with most biological systems. Here, sonosensitizer MWO₄-PEG NPs (M = Fe Mn Co Ni) were synthesized as inhibitors to activation-induced cytidine deaminase (AID), thus neutralizing the extensive carcinogenesis of AID in diffuse large B-cell lymphoma (DLBCL). The physiological properties of these nanomaterials were examined using transmission electron microscopy (TEM). The inhibition of NPs to AID was primarily identified by the affinity interaction prediction between reactive oxygen species (ROS) and AID through molecular dynamics and molecular docking technology. The cell apoptosis and ROS generation in US-triggered NPs treated DLBCL cells (with high levels of AID) were also detected to indicate the sonosensitivity and toxicity of MWO₄-PEG NPs to DLBCL cells. The anti-lymphoma studies using DLBCL and AID-deficient DLBCL cell lines indicated a concentration-dependent profile. The synthesized MWO₄-PEG NPs in this study manifested good sonodynamic inhibitory effects to AID and well treatment for AID-positive hematopoietic cancers.     

Silica‐Protection‐Assisted Encapsulation of Cu2O Nanocubes into a Metal–Organic Framework (ZIF‐8) To Provide a Composite Catalyst

The integration of metal/metal oxide nanoparticles (NPs) into metal–organic frameworks (MOFs) to form composite materials has attracted great interest due to the broad range of applications. However, to date, it has not been possible to encapsulate metastable NPs with high catalytic activity into MOFs, due to their instability during the preparation process. For the first time, we have successfully developed a template protection–sacrifice (TPS) method to encapsulate metastable NPs such as Cu₂O into MOFs. SiO₂ was used as both a protective shell for Cu₂O nanocubes and a sacrificial template for forming a yolk–shell structure. The obtained Cu₂O@ZIF‐8 composite exhibits excellent cycle stability in the catalytic hydrogenation of 4‐nitrophenol with high activity. This is the first report of a Cu₂O@MOF‐type composite material. The TPS method provides an efficient strategy for encapsulating unstable active metal/metal oxide NPs into MOFs or maybe other porous materials.     

Effect of organic moieties (phenyl,naphthalene, and biphenyl) in Zr-MIL-140 on the hydrogenation activity of Pd nanoparticles

MIL-140-type metal organic frameworks(isoreticular zirconium oxide MOFs) with different aromatic moieties(phenyl,naphthalene,and biphenyl) have been synthesized and employed as the supports of palladium nanoparticles(Pd NPs).The catalysts were characterized by XRD,BET,TEM and CO chemisorption.The results reveal that Pd NPs are homogeneously dispersed on all materials whereas different accessibility to CO is observed.The hydrogenation performance in C=C saturation with respect to the effect of the aromatic moiety is compared.The Pd/MIL-140 A MOF with the highest hydrogenation activity among the three catalysts comprised of different aromatic rings points to a unique Pd-πinteraction between Pd and frameworks consisting of mono-phenyl groups(C_6H_4).     

Mixed Co/Fe oxide nanoparticles in block copolymer micelles

Small iron oxide and Co-doped iron oxide nanoparticles (NPs) were synthesized in a commercial amphiphilic block copolymer, poly(ethylene oxide)-b-poly(methacrylic acid) (PEO 68-b-PMAA8), in aqueous solutions. The structure and composition of the micelles containing guest molecules (metal salts) or NPs (metal oxides) were studied using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The enlarged micelle cores after incorporation of metal salts are believed to be formed by both PMAA blocks containing metal species and penetrating PEO chains. The nanoparticle size distributions in PEO 68-b-PMAA8 were determined using small-angle X-ray scattering (SAXS) in bulk. Two independent methods for SAXS data interpretation for comprehensive analysis of volume distributions of metal oxide NPs showed presence of both small particles and larger entities containing metal species which are ascribed to organization of block copolymer micelles in bulk. The magnetometry measurements revealed that the NPs are superparamagnetic and their characteristics depend on the method of the NP synthesis. The important advantage of the PEO 68-b-PMAA8 stabilized magnetic nanoparticles described in this paper is their remarkable solubility and stability in water and buffers.     

A Supported Nickel Catalyst Stabilized by a Surface Digging Effect for Efficient Methane Oxidation

A surface digging effect of supported Ni NPs on an amorphous N‐doped carbon is described, during which the surface‐loaded Ni NPs would etch and sink into the underneath carbon support to prevent sintering. This process is driven by the strong coordination interaction between the surface Ni atoms and N‐rich defects. In the aim of activation of C?H bonds for methane oxidation, those sinking Ni NPs could be further transformed into thermodynamically stable and active metal‐defect sites within the as‐generated surface holes by simply elevating the temperature. In situ transmission electron microscopy images reveal the sunk Ni NPs dig themselves adaptive surface holes, which would largely prevent the migration of Ni NPs without weakening their accessibility. The reported two‐step strategy opens up a new route to manufacture sintering‐resistant supported metal catalysts without degrading their catalytic efficiency.     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.     

Modulation of the superficial electronic structure via metal–support interaction for H2 evolution over Pd catalysts

Electronic interactions can radically enhance the performance of supported metal catalysts and are critical for fundamentally understanding the nature of catalysts. However, at the microscopic level, the details of such interactions tuning the electronic properties of the sites on the metal particle''s surface and metal–support interface remain obscure. Herein, we found polarized electronic metal–support interaction (pEMSI) in oxide-supported Pd nanoparticles (NPs) describing the enhanced accumulation of electrons at the surface of NPs (superficial Pd^δ−) with positive Pd atoms distributed on the interface (interfacial Pd^δ+). More superficial Pd^δ− species mean stronger pEMSI resulting from the synergistic effect of moderate Pd–oxide interaction, high structural fluxionality and electron transport activity of Pd NPs. The surface Pd^δ− species are responsible for improved catalytic performance for H₂ evolution from metal hydrides and formates. These extensive insights into the nature of supported-metal NPs may open new avenues for regulating a metal particle''s electronic structure precisely and exploiting high-performance catalysts.

A new type of electronic effect, polarized metal-support interaction (pEMSI), in oxide-supported Pd nanoparticles describing the enhanced accumulation of electrons at the superficial surface is responsible for improved catalytic H₂ evolution.     

Applications of Non-precious Transition Metal Oxide Nanoparticles in Electrochemistry

Non-precious transition metal oxide nanomaterials offer numerous opportunities for various cost-effective electrochemical applications. This review article features the design and advancement of such nanomaterials with unique features applied for the fabrication of electrochemical devices. Also, it discusses various new syntheses of transition metal oxide nanoparticles (TMO NPs) via multiple chemicophysical and biological procedures. Further, the novel appliances of the TMO NPs with varying sizes and morphologies are appraised. The advantages and challenges of a number of investigations on the TMO NPs towards electrochemical applications are addressed with their standpoint of cost-effectiveness, applicability, and the efficiency of the introduced nanostructures for the industrial applications.     

Zinc and copper oxide nanoparticles decrease synaptosomal glutamate uptake: an in vitro study

Nanoparticles (NPs) are considered as an important environmental risk factor for cognitive impairments and neurodegenerative disorders. Recent evidences have reported a glutamatergic system response against air-borne NPs. Zinc and copper oxides (ZnO and CuO) NPs are the most common metal oxide NPs in industries. The effects of these NPs on hippocampal voltage-dependent ion channels and spatial cognition have been previously studied. However, there is a lack of evidence regarding the effects of ZnO and CuO NPs on glutamatergic synapse neurotransmission in central nervous system. In the present study, the effects of ZnO and CuO NPs on glutamate (Glu) release and uptake have been investigated in isolated nerve terminals (synaptosomes). Our findings have shown that, even in high doses of ZnO and CuO NPs, no significant effect on Glu release is observed. However, a decrease has been observed in uptake of Glu. Hence, ZnO and CuO NPs can be considered as hazardous agents inducing neurodegenerative disorders through Glu excitotoxicity.