Deposition of metal clusters on single-layer graphene/Ru(0001): Factors that govern cluster growth

Fabrication of nanoclusters on a substrate is of great interest in studies of model catalysts. The key factors that govern the growth and distribution of metal on graphene have been studied by scanning tunneling microscopy (STM) based on different behaviors of five transition metals, namely Pt, Rh, Pd, Co, and Au supported on the template of a graphene moiré pattern formed on Ru(0001). Our experimental findings show that Pt and Rh form finely dispersed small clusters located at fcc sites on graphene while Pd and Co form large clusters at similar coverages. These results, coupled with previous findings that Ir forms the best finely dispersed clusters, suggest that both metal–carbon (M–C) bond strength and metal cohesive energies play significant roles in the cluster formation process and that the M–C bond strength is the most important factor that affects the morphology of clusters at the initial stages of growth. Furthermore, experimental results show Au behaves differently and forms a single-layer film on graphene, indicating other factors such as the effect of substrate metals and lattice match should also be considered. In addition, the effect of annealing Rh on graphene has been studied and its high thermal stability is rationalized in terms of a strong interaction between Rh and graphene as well as sintering via Ostwald ripening.     

Band structure of Au layers on the Ru(0001) and graphene/Ru(0001) surfaces

The electronic structures of Au monolayers on the Ru(0001) and graphene-coated Ru(0001) surfaces have been calculated by DFT method using the supercell (repeated-slab) approach. The local densities of states (LDOS) and band structures of the monolayer and bilayer Au films adsorbed on the graphene/Ru(0001) and those of free hexagonal Au layers are found to be very similar. This result indicates that the monolayer graphene almost completely screens the Au layers from the Ru(0001) substrate surface, so that electronic properties of Au films adsorbed on graphene are determined predominantly by the electronic structure of the Au adlayers, essentially independent on the electronic structure of the substrate surface.     

Formation of graphene on Ru（0001） surface

We report on the formation of a graphene monolayer on a Ru(0001) surface by annealing the Ru(0001) crystal. The samples are characterized by scanning tunnelling microscopy (STM) and Auger electron spectroscopy (AES). STM images show that the Moir\'{e} pattern is caused by the graphene layer mismatched with the underlying Ru(0001) surface and has an $N\times N$ superlattice. It is further found that the graphene monolayer on a Ru(0001) surface is very stable at high temperatures. Our results provide a simple and convenient method to produce a graphene monolayer on the Ru(0001) surface, which is used as a template for fabricating functional nanostructures needed in future nano devices and catalysis.     

A molecular beam study of the adsorption dynamics of CO on Ru(0001), Cu(111) and a pseudomorphic Cu monolayer on Ru(0001)

We have investigated the sticking coefficient of CO on Ru(0001), a pseudomorphic Cu monolayer on Ru(0001), and a fully relaxed Cu(111) multilayer as function of kinetic energy, surface coverage, and surface temperature. At a low kinetic energy of 0.09 eV, the initial sticking coefficients, S₀, on these surfaces are determined to be 0.92, 0.96 and 0.87, respectively. In all cases, a decrease of S₀ with increasing beam energy was observed, yielding values of 0.58, 0.14 and 0.07, respectively, at a kinetic energy of 2.0 eV. For all three surfaces the coverage dependent sticking coefficients, S(Θ), display very characteristic behavior at low kinetic energies: S(Θ) remains more or less constant up to coverages close to saturation, indicative of precursor adsorption kinetics. However, characteristic minima at intermediate coverages are observed, which are correlated to the formation of well ordered adsorbate phases. For high kinetic energies we observe a transition towards a linear decrease of S(Θ) for Ru(0001). In contrast, for the pseudomorphic Cu monolayer and for Cu(111) we find an increase in the sticking coefficients at low coverages, followed by a decrease close to saturation. This behavior is attributed to adsorbate assisted sticking, that is, to a higher sticking coefficient on adsorbate covered regions than on the bare surface. The comparison between the pseudomorphic monolayer and Cu(111) reveals that the CO bond strength to the former is larger by 40%. The initial sticking coefficients for both surfaces are very similar at low kinetic energies; at high kinetic energies, S₀ for the pseudomorphic Cu monolayer is, however, larger by a factor of two.     

Labyrinthine island growth during Pd/Ru(0001) heteroepitaxy

Using low energy electron microscopy we observe that Pd deposited on Ru only attaches to small sections of the atomic step edges surrounding Pd islands. This causes a novel epitaxial growth mode in which islands advance in a snakelike motion, giving rise to labyrinthine patterns. Based on density functional theory together with scanning tunneling microscopy and low energy electron microscopy we propose that this growth mode is caused by a surface alloy forming around growing islands. This alloy gradually reduces step attachment rates, resulting in an instability that favors adatom attachment at fast advancing step sections.     

Site-selective adsorption of xenon on a stepped Ru(0001) surface

The adsorption of xenon has been studied with UV photoemission (UPS), flash desorption (TDS) and work function measurements on differently conditioned Ru(0001) surfaces at 100 K and at pressures up to 3 × 10^?5 Torr. Low energy electron diffraction (LEED) and Auger electron spectroscopy (AES) served to ascertain the surface perfectness. On a perfect Ru(0001) surface only one Xe adsorption state is observed, which is characterized by$\text{Xe}\text{5}\text{p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$,$\text{1}\text{2}$ electron binding energies of 5.40 and 6.65 eV, an adsorption energy of E_ad≈ 5 kcal/mole and dipole moment of μ'_T ≈ 0.25 D. On a stepped-kinked Ru(0001) surface, the terrace-width, the step-height and step-orientation of which are well characterized with LEED, however, two coexisting xenon adsorption states are distinguishable by an unprecedented separation in$\text{Xe}\text{5}\text{p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$,$\text{1}\text{2}$ electron binding energies of 800 meV, by their different UPS intensities and line shapes, by their difference in adsorption energy ofΔE_ad ≈ 3 kcal/mole and finally by their strongly deviating dipole moments of μ_S = 1.0 D and μ_T = 0.34 D. The two xenon states (which are also observed on a slightly sputtered surface) are identified as corresponding to xenon atoms being adsorbed at step and terrace sites, respectively. Their relative concentrations as deduced from the UPS intensities quantitatively correlate with the abundance of step and terrace sites of the ideal TLK surface structure model as derived from LEED. Furthermore, ledge-sites and kink-sites are distinguishable via E_ad. The E_ad heterogeneity on the stepped-kinked Ru(0001) surface is interpreted in terms of different coordination and/or different charge-transfer-bonding at the various surface sites. The enormous increase in Xe 5p electron binding energy of 0.8 eV for Xe atoms at step sites is interpreted as a pure surface dipole potential shift. —The observed effects suggest selective xenon adsorption as a tool for local surface structure determination.     

High quality sub-monolayer,monolayer, and bilayer graphene on Ru（0001）

High quality sub-monolayer, monolayer, and bilayer graphene were grown on Ru(0001). For the sub-monolayer graphene, the size of graphene islands with zigzag edges can be controlled by the dose of ethylene exposure. By increasing the dose of ethylene to 100 Langmuir at a high substrate temperature(800℃), high quality single-crystalline monolayer graphene was synthesized on Ru(0001). High quality bilayer graphene was formed by further increasing the dose of ethylene while reducing the cooling rate to 5℃/min. Raman spectroscopy revealed the vibrational states of graphene, G and 2D peaks appeared only in the bilayer graphene, which demonstrates that it behaves as the intrinsic graphene. Our present work affords methods to produce high quality sub-monolayer, monolayer, and bilayer graphene, both for basic research and applications.     

Si面4H-SiC衬底上外延石墨烯近平衡态制备

SiC热解法是制备大面积、高质量石墨烯的理想选择之一.外延石墨烯的晶体质量仍是制约其应用的关键因素之一.本文通过SiC热解法在4H-SiC(0001)衬底上制备单层外延石墨烯.通过引入氩气惰性气氛和硅蒸气,使SiC衬底表面的Si原子升华与返回概率接近平衡,外延石墨烯生长速率大大减慢,单层石墨烯的生长时间从15 min延长至75 min.测试分析表明,生长速率减慢,外延石墨烯中缺陷减少,晶体质量提高,使得外延石墨烯的电性能都得到改善,单层外延石墨烯的最高载流子迁移率达到1200 cm2/V·s,方阻604?/.以上结果表明,控制生长气氛,减慢生长速率是实现高质量外延石墨烯的可行途径之一.     

CO分子在Co(0001)表面吸附的第一性原理研究

应用第一性原理对CO分子在Co(0001)表面( squar3× squar3)R30°−CO吸附结构进行不同形式的密度泛函计算研究. 结果表明：吸附能修正前,仅RPBE泛函预测CO顶位吸附;而修正后PW91、PBE和PKZB泛函结果也表明CO分子Top顶位吸附最稳定,与实验结果一致.对于吸附几何结构、吸附前后体系功函、C-O伸缩振动频率和CO分子态密度分布,所有泛函给出一致的结果,且与已有实验结果符合.     

CO分子在Co(0001)表面吸附的第一性原理研究

应用第一性原理对CO分子在Co(0001)表面( squar3× squar3)R30°−CO吸附结构进行不同形式的密度泛函计算研究. 结果表明：吸附能修正前,仅RPBE泛函预测CO顶位吸附;而修正后PW91、PBE和PKZB泛函结果也表明CO分子Top顶位吸附最稳定,与实验结果一致.对于吸附几何结构、吸附前后体系功函、C-O伸缩振动频率和CO分子态密度分布,所有泛函给出一致的结果,且与已有实验结果符合.     

Effect of strain on geometric and electronic structures of graphene on Ru(0001) surface

The atomic and electronic structures of a graphene monolayer on a Ru(0001) surface under compressive strain are investigated by using first-principles calculations. Three models of graphene monolayers with different carbon periodicities due to the lattice mismatch are proposed in the presence and the absence of the Ru(0001) substrate separately. Considering the strain induced by the lattice mismatch, we optimize the atomic structures and investigate the electronic properties of the graphene. Our calculation results show that the graphene layers turn into periodic corrugations and there exist strong chemical bonds in the interface between the graphene N×N superlattice and the substrate. The strain does not induce significant changes in electronic structure. Furthermore, the results calculated in the local density approximation (LDA) are compared with those obtained in the generalized gradient approximation (GGA), showing that the LDA results are more reasonable than the GGA results when only two substrate layers are used in calculation.     

Scanning tunnelling microscope studies of growth of RuO2（110） thin layer on Ru（0001）

This paper reports that the growth of RuO_x(110) thin layer growth on Ru(0001) has been investigated by means of scanning tunnelling microscope (STM). The STM images showed a domain structure with three rotational domains of RuO_x(110) rotated by an angle of 120℃. The as-grown RuO_x(110) thin layer is expanded from the bulk-truncated RuO_x(110) due to the large mismatch between RuO_x(110) and the Ru(0001) substrate. The results also indicate that growth of RuO_x(110) thin layer on the Ru(0001) substrate by oxidation tends first to formation of the Ru-O (oxygen) chains in the [001] direction of RuO_x(110).     

Multidimensional effects on dissociation of N2 on Ru(0001)

The applicability of the Born-Oppenheimer approximation to molecule-metal surface reactions is presently a topic of intense debate. We have performed classical trajectory calculations on a prototype activated dissociation reaction, of N2 on Ru(0001), using a potential energy surface based on density functional theory. The computed reaction probabilities are in good agreement with molecular beam experiments. Comparison to previous calculations shows that the rotation of N2 and its motion along the surface affect the reactivity of N2 much more than nonadiabatic effects.     

Ru(0001) 表面BaO吸附层的原子结构和氮分子的吸附性质

采用密度泛函理论研究了Ru(0001) /BaO表面的原子层结构和氮分子的吸附性质. 研究结果表明, 在低覆盖度下氧化钡倾向于以相同的构型形成Ru(0001) 表面原子层. 在此构型中, 氧原子位于表面p(1× 1) 结构的hcp谷位, 而钡原子则位于同一p(1× 1) 结构的顶位附近. 钌氧键键长等于0.209 nm, 比EXAFS的实验值大0.018 nm. 在Ru(0001) /BaO表面氮分子倾向吸附于钡原子附近. 相应位置的氮分子吸附能位于0.70到0.87 eV之间, 大于氧原子附近的氮分子吸附能. 钡原子附近的钌原子对氮分子具有更强的活化性能. 相应位置的氮分子拉伸振动频率等于1946 cm^{- 1}, 比氧原子附近的最大分子振动频率小约130 cm^-1. Ru(0001) /BaO表面氮分子键强度介于清洁Ru(0001) 和Ru(0001) /Ba表面之间. Ru(0001)/BaO表面不同位置的氮分子吸附性质差异是由钡和氧原子化学性质不同造成的. 表面钡原子的作用能够减少吸附氮分子的σ^*轨道电子密度, 增加π^*轨道电子密度, 从而增强氮分子和钌原子间的轨道杂化作用, 弱化氮分子键.     

Time-resolved two-photon photoemission of unoccupied electronic states of periodically rippled graphene on Ru(0001)

The unoccupied electronic states of epitaxially grown graphene on Ru(0001) have been explored by time- and angle-resolved two-photon photoemission. We identify a Ru derived resonance and a Ru/graphene interface state at 0.91 and 2.58?eV above the Fermi level, as well as three image-potential derived states close to the vacuum level. The most strongly bound, short-lived, and least dispersing image-potential state is suggested to have some quantum-well character with a large amplitude below the graphene hills. The two other image-potential states are attributed to a series of slightly decoupled states. Their lifetimes and dispersions are indicative of electrons moving almost freely above the valley areas of the moiré superstructure of graphene.