MoSi_2(001)表面的氧吸附行为

运用第一原理密度泛函理论方法,首先计算了MoSi_2各清洁表面的表面能,(001)Si-|-Si断面具有较低的表面能,是MoSi_2最可能的解理面;通过生成能及键布居分析研究了单氧原子、双氧原子及氧分子在(001)Si-|-Si断面的吸附行为,发现单氧原子在空位处吸附最稳定,此时O极易与Si结合,得到的Si-O-Si键长及键角与SiO_2的非常接近,表明低浓度下O极易与表面的Si结合生成SiO_2;双氧原子发生空位+顶位吸附时O原子除与Si有强作用外,可与Mo有一定相互作用;氧分子以平行的方式接近空位最有利于吸附,此时氧分子最易分解为氧原子,发生氧原子在空位的吸附.     

Adsorption of V on a hematite (0 0 0 1) surface and its oxidation: Submonolayer coverage

The adsorption of submonolayer V on an idealized model hematite (0 0 0 1) surface and subsequent oxidation under atomic O adsorption are studied by density functional theory. The preferred adsorption sites, adsorption energy and configuration changes due to V and O adsorption are investigated. It is found that in most cases V forms threefold bonds with surface O atoms, inducing a large geometry change at the hematite surface and near surface region and a bond stretch between surface Fe and O. The adsorption energy is mainly decided by interplay between adsorbed metal-surface oxygen bonding and adsorbed metal - subsurface metal interaction. The relative energy of subsequent O adsorption and geometry depends on the reformed V/hematite structure. Electronic properties such as projected densities of states and chemical state change upon V adsorption are studied through both periodic slab and embedded cluster localized orbital calculations; both strong vanadium-oxygen and vanadium-iron interactions are found. While V generally donates electrons to a hematite surface, causing nearby Fe to be partially reduced, the Fe and V oxidization state depends very much on the coverage and detailed adsorption configuration. When the V/hematite system is exposed to atomic O, V is further oxidized and surface/near surface Fe is re-oxidized. Our theoretical results are compared with X-ray surface standing wave and X-ray photoelectron spectroscopic measurements. The influence of d-electron correlation on the predicted structures is briefly discussed, making use of the DFT + U scheme.     

Surface concentration profile and surface energy in binary alloys

An improved formulation for the orientation-dependence of multi-layer surface segregation is developed in terms of bond enthalpy and strain energy minimization. Inclusion of this result in the Gibbs adsorption isotherm yields the surface energy. Sample calculations of the surface energy isotherm for solid AuCu and liquid CuNi alloys are in good agreement with published experimental data. The conditions for the existence of an extremum in the surface energy isotherm, originally derived by Defay et al. from a monolayer model, are re-examined on the basis of a multi-layer model. Their results are found applicable to this more general situation in the absence of strain energy. An orientation-dependence of the extremum surface energy, but not of the composition at which the extremum surface energy occurs, is demonstrated.     

基于密度泛函理论的CO2吸附微观机理比较研究

为探究吸附法捕获CO₂过程中的微观机理和吸附剂材料间的作用关系,基于密度泛函理论方法,综合比较了典型吸附剂包括煤基官能团、Fe、限域离子液体、Na₂CO₃、SrTiO₃与CO₂的吸附过程和差异性.根据不同计算策略,着重分析比较了吸附能、结构优化参数、吸附构型以及原子分布等参数.结果表明,化学吸附中CO₂分子与吸附面呈平行关系时通常吸附能最大;在一种材料的同类型官能团中,吸附能大小与氧原子的数量呈正相关关系;吸附过程中C-O键的伸长活化会生成一种重要的中间产物CO₂^-.提出在探寻CO₂吸附材料时可以在含氧原子较多的官能团、活性金属表面等方面进一步探究.最后对基于密度泛函理论的CO₂的吸附机理的进一步研究方向进行了展望.     

CH_4/H_2O/CO_2在β-SiO_2(100)面吸附的第一性原理研究

多孔介质中的吸附直接影响页岩气赋存、运移.基于密度泛函理论从量子力学角度研究CH_4/H_2O/CO_2在页岩储层主体矿物成分SiO_2上的吸附构型和吸附特性,计算并分析了吸附能与态密度等特征.研究表明:CH_4、H_2O和CO_2在β-SiO_2(100)面的吸附能分布在-0.2 eV～-0.1eV区间内,为物理吸附;最小吸附能大小依次为:CH_4 H_2O CO_2,即,CO_2的吸附能力最强,H_2O次之,CH_4最弱;各吸附质处于吸附能最大与最小时的键长键角变化均小于1%,最大吸附能对应的吸附质键长键角变化率均大于吸附能最小时的,吸附质的物理结构变化微弱表明其所受作用力微弱;基底处于最稳定吸附位时态密度基本重合,表明各吸附质与β-SiO_2表面相互作用相似且差异较小;CH_4、H_2O、CO_2的态密度均出现不同程度偏移,且CO_2在能量更低的区域具有态密度分布,更易优先吸附.     

Edge effect and interface confinement modulated strain distribution and interface adhesion energy in graphene/Si system

In order to clarify the edge and interface effect on the adhesion energy between graphene(Gr)and its substrate,a theoretical model is proposed to study the interaction and strain distribution of Gr/Si system in terms of continuum medium mechanics and nanothermodynamics.We find that the interface separation and adhesion energy are determined by the thickness of Gr and substrate.The disturbed interaction and redistributed strain in the Gr/Si system induced by the effect of surface and interface can make the interface adhesion energy decrease with increasing thickness of Gr and diminishing thickness of Si.Moreover,our results show that the smaller area of Gr is more likely to adhere to the substrate since the edge effect improves the active energy and strain energy.Our predictions can be expected to be a guide for designing high performance of Grbased electronic devices.     

Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Adsorption of glycine on diamond(001): Role of bond angle of carbon atoms

The adsorption behaviors of glycine on diamond(001) are systematically investigated by first-principles calculations.We have considered all possible adsorption configurations without a surface dangling bond and give a quantitative analysis for the relationship between the deviation of carbon bond angle and adsorption energy. We found that a smaller distortion of carbon covalent bond angle results in a more stable adsorption structure, and the most stable adsorption has a benzene-ringlike structure with the highest adsorption energy of 5.11 e V per molecule and the minimum distortion of carbon covalent bond angle.     

Surface defects on ZnO nanowires: implications for design of sensors

Surface defects are commonly believed to be fundamentally important to gas-sensor performance. We examine the effect of gas coverage and ethanol orientation on its adsorption on the stoichiometric and oxygen deficient (101(-)0) nanowire surface. Our density functional theory calculations show that ethanol adsorbs in multiple stable configurations at coverages between 1/4 and 1 ML, highlighting the ability of ZnO to detect ethanol. Ethanol prefers to bind to a surface Zn via the adsorbate oxygen atom and, if a surface oxygen atom is in close proximity, the molecule is further stabilized by formation of a hydrogen bond between the hydrogen of the hydroxyl group and the surface oxygen. Two primary adsorption configurations were identified and have different binding strengths that could be distinguished experimentally by the magnitude of their OH stretching frequency. Our findings show that ethanol adsorbed on the oxygen deficient ZnO(101(-)0) surface has a reduced binding strength. This is due to either the lack of a hydrogen bond (due to a deficiency in surface oxygen) or to surface reconstruction that occurs on the defect surface that weakens the hydrogen bond interaction. This reduced binding on the oxygen deficient surface is in contrast to the defect enhanced gas-sensor interaction for other gases. Despite this difference, ethanol still acts as a reducing gas, donating electrons to the surface and decreasing the band gap. We show that multiple adsorbed ethanol molecules prefer to be orientated parallel to each other to facilitate the hydrogen bonding to the defect-free surface for enhanced interaction.     

A model of oxygen adsorption at liquid copper surfaces

A model of O-adsorption at liquid metal surfaces has been constructed, using liquid Cu as an example. The modeling approach used is similar to the regular solution scheme previously used successfully for modeling the adsorption/segregation behavior of metal alloys, in that the internal energy of the system is evaluated by nearest neighbor bond energies. In the model, the adsorption of oxygen in the near-surface region is allowed to occur at both surface and sub-surface sites. The model predicts a variety of possible adsorption characteristics, including the possibility of first order adsorption transitions which involve the formation of a 2-dimensional surface oxide, and different sequences for the occupancy of surface and sub-surface adsorption sites. In particular, by fitting the model to the experimental dependence of Cu surface energy on O-partial pressure, it is possible to conclude that O-adsorption in that case most likely occurs by the occupancy of sub-surface sites.     

Mechanism of oxygen adsorption on surfaces of γ-TiAl

We studied the adsorption behavior of oxygen on low index surfaces of γ-TiAl via first principles to investigate the mechanism that drives the adsorption behavior. The (100) surface is the most stable surface energetically followed by the (111), (110) and (001) surfaces. A study of the adsorption of a single oxygen atom on surfaces of TiAl showed that the O atom prefers the Ti-rich environment that has a high potential of generating TiO₂. Competition between O-Al bonding and O-Ti bonding was observed in the O adsorbed surface regions. However, the O-Ti interaction dominates the adsorption behavior in all considered systems except when O is adsorbed on an Al-terminated (001) surface as the O–Al bond is stronger than O–Ti bond. A linear relationship between adsorption energy and integration of orbital overlaps between the O atom and the metals is obtained, which indicates that the electronic structure controls the adsorption behavior of an O atom on a γ-TiAl surface — an opportunity to improve the oxidation resistance of γ-TiAl based alloys.     

Decomposition of NH3 on Ir(110): A first-principle study

The adsorption and dehydrogenation of NH₃ on Ir(110) have been investigated using periodic density functional calculations. The adsorption sites, the adsorption energies, the predominant adsorption configurations and the transition states of the stepwise dehydrogenation of NH₃ were identified. The results show that the NH₃ prefers the top site with inclining 68.6° of N―Ir bond relative to the surface, while NH₂, NH, N and H favor the short bridge position. The NH decomposition to N and H or recombination with H to form NH₂ shares the similar and relatively high reaction energy barrier, implying that NH will be the main surface species in the NH₃ dehydrogenation processes. N―N bond formation possesses the highest energy barrier of 1.75 eV, indicating that it is the rate-limiting step for NH₃ decomposition. Barrier decomposition analysis reveals that the deformation and the binding to the surface of the reactants and the interaction among binding species in transition states will increase the activation energy while the bonding to the surface of the species in transition state will decrease the energy barrier.     

奥硝唑在TiO_2(101)晶面上吸附特征的理论研究

奥硝唑残留是一种新兴污染物,对环境和人类健康具有巨大的威胁.采用密度泛函理论,研究了奥硝唑在锐钛矿TiO_2(101)晶面的吸附特性.优化了奥硝唑在锐钛矿TiO_2(101)晶面的吸附结构,计算了最佳吸附位点,吸附能,态密度,电子结构图.结果表明,当咪唑环上N(3)原子吸附在TiO_2的Ti(5)原子上时,吸附能最大,为最稳定的吸附构型.通过对吸附构型的分析,我们发现C(2)-N(3)键呈现变弱趋势,我们推测奥硝唑在TiO_2表面降解的可能性以及反应活性位点就是咪唑环上C-N键.     

Surface strain versus substrate interaction in heteroepitaxial metal layers: Pt on Ru(0001)

By studying the adsorption of CO on up to 30 layers of Pt deposited on Ru(0001) the influence of surface strain on the adsorption energy has been disentangled from the residual chemical interaction with the substrate. While the electronic influence of the substrate has largely vanished for three Pt layers, the effect of surface strain due to the 2.5% lattice mismatch of Pt and Ru remains initially intact and is only gradually released for n>/=5 Pt layers. Electronic structure calculations confirm the experimental observations, in particular, the dramatic decrease of the CO adsorption energy on a single Pt layer which is caused by the strong Pt-Ru interlayer coupling.     

Ga-induced superstructures on the Si(1 1 1) 7 × 7 surface

Monolayer Ga adsorption on Si surfaces has been studied with the aim of forming p-delta doped nanostructures. Ga surface phases on Si can be nitrided by N₂⁺ ion bombardment to form GaN nanostructures with exotic electron confinement properties for novel optoelectronic devices. In this study, we report the adsorption of Ga in the submonolayer regime on 7 × 7 reconstructed Si(1 1 1) surface at room temperature, under controlled ultrahigh vacuum conditions. We use in-situ Auger electron spectroscopy, electron energy loss spectroscopy and low energy electron diffraction to monitor the growth and determine the properties. We observe that Ga grows in the Stranski-Krastanov growth mode, where islands begin to form on two flat monolayers. The variation in the dangling bond density is observed during the interface evolution by monitoring the Si (LVV) line shape. The Ga adsorbed system is subjected to thermal annealing and the residual thermal desorption studied. The difference in the adsorption kinetics and desorption dynamics on the surface morphology is explained in terms of strain relaxation routes and bonding configurations. Due to the presence of an energetic hierarchy of residence sites of adatoms, site we also plot a 2D phase diagram consisting of several surface phases. Our EELS results show that the electronic properties of the surface phases are unique to their respective structural arrangement.     

IR spectroscopy of CH2CBrF adsorbed on TiO2 and quantum-mechanical studies

The adsorption at room temperature of 1-bromo-1-fluoroethene (CH₂CBrF) on TiO₂ has been investigated by Fourier-transform infrared spectroscopy after a preventive assignment of the fundamentals in the gas-phase, carried out for the first time. The spectrum resulting from the adsorption has been compared with the gas-phase one and the most important differences consist in a red-shift of the CH₂ stretching vibration and in the presence of two distinct absorptions for both the C=C and C–F stretching modes. Basing on the observed features it has been inferred that there is the formation of an H-bond between the CH₂ group and a surface Lewis basic site and that the adsorption can occur through the double C=C bond or the F atom. Two proposed adsorbate-substrate structures have been investigated by periodic quantum-mechanical calculations at DFT/B3LYP level considering the rutile (110) surface. In the case of the adsorption by the F atom, also the formation of the H-bond has been considered. The interaction energy resulting from the adsorption through the double C = C bond is smaller than that arising from the interaction by means the F atom and the H-bond. The shifts due to the adsorption of the calculated vibrational frequencies well reproduce the experimental data.     

第一性原理研究H_2O分子在CaCO_3(104)表面吸附

基于密度泛函理论的第一性原理方法模拟研究H_2O在CaCO_3(104)表面的吸附特征.首先,研究H_2O分子在CaCO_3(104)表面的顶位、桥位(短桥位、长桥位)和穴位上垂直和平行表面两种类型下的8种高对称吸附结构模型,结合吸附能和稳定吸附构象确定最优吸附位.而后,基于H_2O/CaCO_3(104)最优吸附结构模型,研究吸附前后H_2O和CaCO_3(104)表面的物理结构、电子结构(Mulliken电荷布居数、态密度、电子局域函数)的特征,分析H_2O/CaCO_3(104)表面之间的相互作用以及成键机理.研究结果:吸附能和体系稳定构象显示H_2O分子/CaCO_3(104)表面的最稳定吸附结构为穴位-平行.在穴位-平行位吸附后,H_2O分子的O-H键长和H-O-H键角均发生改变; CaCO_3晶体平行和垂直(104)表面方向上原子位置均发生改变,表面层变化最大;即吸附作用对H_2O分子和CaCO_3晶体的物理结构均产生较大影响; H_2O/CaCO3(104)最优吸附体系的Mulliken电荷布居数、电子态密度、电子局域函数的研究均说明H_2O分子与CaCO3(104)之间存在电子的转移形成化学键.其中,Ca-O(H_2O)形成离子键,H(H_2O)-O(CaCO_3)之间存在氢键作用.本文研究揭示了方解石表面水湿性的原因,同时为方解石润湿性的深入研究奠定基础.     

First-principles study on the catalytic role of Ag in the oxygen adsorption of LaMnO3(0 0 1) surface

In the present paper, the catalytic role of Ag in the oxygen adsorption of LaMnO₃(0 0 1) surface has been theoretically investigated using first-principles calculations based on the density functional theory (DFT) and pseudopotential method. The O₂ adsorption energy is larger for the vertical adsorption and the covalent bond was formed between O₂ molecule and surface Mn. The calculation of electronic properties of interaction between Ag atom and LaMnO₃(0 0 1) surface demonstrates that the most stable position for Ag adsorption is hollow site. The O₂ adsorption energy dramatically increased from 0.298 eV to 1.108 eV due to Ag pre-adsorbed. It is Ag pre-adsorbed that facilitates O₂ adsorption on surface. The bond length and bond population of O₂ molecule indicate that Ag atom facilitates O₂ molecule dissociative adsorption. The Ag atom strengthens LaMnO₃(0 0 1) substrate activity and activity center was formed on surface, which enhances the electrocatalytic activity of LaMnO₃ as solid oxide fuel cells cathode material at low temperature.     

基于第一性原理的CVD金刚石涂层表面氧原子作用分析

采用第一性原理方法研究了氧原子在CVD金刚石涂层表面吸附形成的两种氧掺杂结构的差异及脱附CO的难易程度.仿真计算结果表明：氧原子在金刚石表面顶位和桥位吸附形成C=O羰结构和C-O-C醚结构,改变与其直接成键的局部金刚石结构;C-O-C结构吸附能比C=O结构大,其结构更加稳定;C=O结构断键脱附形成CO的能垒比C-O-C结构更低,CVD金刚石涂层表面脱附CO主要是以C=O断键形成;氢终止表面能够增强碳原子之间成键,提高C=O脱附的能垒,而氧终止表面作用相反,降低脱附能垒.     

A comparative study of ethylene oxide and diethylene dioxide adsorption on silicon (0 0 1)

The adsorption of ethylene oxide (oxirane) and diethylene dioxide (1,4-dioxane) on the Si(0 0 1) surface was investigated using the first-principles pseudopotential method within a generalised gradient approximation to the density functional theory. Our results indicate that oxirane adsorption on the silicon surface probably occurs via C-C bond. This interaction induces the breaking of the C-C bond and the formation of a Si-C-O-C-Si ring. The 1,4-dioxane interaction with the silicon (2 × 2) surface, on the other hand, results in the decomposition of the considered molecule in different radicals, depending on the original adsorbed structure. In order to disregard the possible influence of the slab considered, we suggest that high order reconstruction surfaces, i.e. (4 × 2) or (4 × 4), should be investigated.