Pressure effect on magnetic properties of RCo12B6 (R=Y,Ce) compounds

The effect of pressure on magnetic properties of YCo₁₂B₆ and CeCo₁₂B₆ was studied in temperature range 5–300 K at pressures up to 9 kbar. The Curie temperature T_C and spontaneous magnetization M_S decrease with pressure for both compounds. The decrease can be attributed mostly to the volume dependence of both, the Co magnetic moment and the exchange interactions. The hybridization of the p–d states as a consequence of small distances between the Co and B atoms can be one reason of the relatively low pressure effects (ΔT_C/Δp=?0.39±0.02 K/kbar, d ln M_S/dp=?0.0013±0.0002 kbar^?1) in YCo₁₂B₆. Higher volume sensitivity of magnetic properties of CeCo₁₂B₆ in comparison with YCo₁₂B₆ can be attributed to the pressure induced changes of the Ce f- and Co d-states.     

High resolution emission spectroscopy of the E2Π–X2Σ+ transition of SrH and SrD

Emission spectra of SrH and SrD have been studied at high resolution using a Fourier transform spectrometer. The molecules have been produced in a high temperature furnace from the reaction of strontium metal vapor with H₂/D₂ in the presence of a slow flow of Ar gas. The spectra observed in the 18 000–19 500 cm^?1 region consist of the 0–0 and 1–1 bands of the E²Π–X²Σ⁺ transition of the two isotopologues. A rotational analysis of these bands has been obtained by combining the present measurements with previously available pure rotation and vibration–rotation measurements for the ground state, and improved spectroscopic constants have been obtained for the E²Π state. The present analysis provides spectroscopic constants for the E²Π state as ΔG(½) = 1166.1011(15) cm^?1, B_e = 3.805503(32) cm^?1, α_e = 0.098880(47) cm^?1, r_e = 2.1083727(89) Å for SrH, and ΔG(½) = 839.1283(23) cm^?1, B_e = 1.918564(15) cm^?1, α_e = 0.034719(23) cm^?1, r_e = 2.1121943(83) Å for SrD.     

Superconductivity of the platinum doped 122 iron arsenide SrFe2−xPtxAs2

Pt doped 122 iron arsenide SrFe_1?xPt_xAs₂ (0 ? x ? 0.4) was successfully synthesized. The tetragonal unit-cell volume and the lattice constant a increase with increasing the Pt content, while c decreases, suggesting that the Fe ions are indeed replaced by Pt ions. By the Pt doping, the magnetic order of the parent phase is suppressed, and superconductivity emerges at approximately x = 0.15. T_c reaches the maximum of 16 K at x = 0.2. The compounds series can be a suitable subject to investigate role of the doped 5d state in the superconducting 3d Fe–As layer.     

Excess currents larger than the point contact limit in normal-metal/superconducting junctions

In a point contact NS junction, perfect Andreev reflection occurs over a range of voltages equal to the superconducting energy gap, producing an excess current of I_exc =  (4 / 3)(2 eΔ / h). If the superconductor has a finite width, rather than the infinite width of the point contact, one cannot neglect superfluid flow inside the superconducting contact. The energy range available for perfect Andreev reflections then becomes larger than the superconducting gap, since superfluid flow alters the dispersion relation inside the finite width superconductor. We find a maximum excess current of approximately (7 / 3)(2 eΔ / h) when the width of the superconductor is approximately 7 / 3 times the width of the normal metal.     

Synthesis and visible light photocatalysis water splitting property of chromium-doped Bi4Ti3O12

Photocatalysts Bi₄Ti_3 ? xCr_xO₁₂(x = 0.00, 0.06, 0.15, 0.30, 0.40, and 0.50) with perovskite structure were synthesized by sol–gel method and their electronic structures and photocatalytic activities were investigated. The Bi₄Ti_2.6Cr_0.4O₁₂ photocatalyst exhibited the highest performance of H₂ evolution in methanol aqueous solution (58.1 μmol h^? 1 g^? 1) under visible light irradiation (λ > 400 nm) without a co-catalyst, whereas no H₂ evolution is observed for Bi₄Ti₃O₁₂ under the same conditions. The UV–vis spectra indicated that the Bi₄Ti_2.6Cr_0.4O₁₂ had strong photoabsorption in the visible light region. The results of density functional theory (DFT) calculation illuminate that the conduction bands of Bi₄Ti₃O₁₂ are mainly attributable to the Ti 3d + Bi 6p orbitals, and the valence bands are composed of O 2p + Bi 6s hybrid orbitals, while the conduction bands of chromium-doped Bi₄Ti₃O₁₂ are mainly attributable to the Ti 3d + Bi 2p + Cr 3d orbitals, and the O 2p + Cr 3d hybrid obitals are the main contribution to the valence band.     

Thermodynamics and kinetics of CO and benzene adsorption on Pt(111) studied with pulsed molecular beams and microcalorimetry

The adsorption and desorption of the system CO/Pt(111) and C₆H₆/Pt(111) at 300 K has been investigated with a pulsed molecular beam method in combination with a microcalorimeter. For benzene the sticking probability has been measured in dependence of the coverage θ. For coverages θ > 0.8 transient adsorption is observed. From an analysis of the time-dependence of the molecular beam pulses the rate constant for desorption is determined to be 5.6 s^? 1. With a precursor-mediated kinetic adsorption model this allows to obtain also the hopping rate constant of 95.5 s^? 1. The measured adsorption enthalpies could be best described by (199 ? 77θ ? 51θ²) kJ/mol, in good agreement with the literature values. For CO on Pt(111) also transient adsorption has been observed for θ > 0.95 at 300 K. The kinetic analysis yields rate constants for desorption and hopping of 20 s^?1 and 51 s^?1, respectively. The heats of adsorption show a linear dependence on coverage (131 ? 38θ) kJ/mol between 0 ≤ θ ≤ 0.3, which is consistent with the desorption data from the literature. For higher coverage (up to θ = 0.9ML) a slope of ?63 kJ/mol describes the decrease of the differential heat of adsorption best. This result is only compatible with desorption experiments, if the pre-exponential factor decreases strongly at higher coverage. We found good agreement with recent quantum chemical calculations made for (θ = 0.5ML).     

Reduction of thin-film ceria on Pt(111) by supported Pd nanoparticles probed with resonant photoemission

Local defects present in CeO_2 ? x films result in a mixture of Ce³⁺ and Ce⁴⁺ oxidation states. Previous studies of the Ce 3d region with XPS have shown that depositing metal nanoparticles on ceria films causes further reduction, with an increase in Ce³⁺ concentration. Here, we compare the use of XPS and resonant photoemission spectroscopy (RESPES) to estimate the concentration of Ce³⁺ and Ce⁴⁺ in CeO_2 ? x films grown on Pt (111), and the variation of this concentration as a function of Pd deposition. Due to the nature of the electronic structure of CeO_2 ? x, resonant peaks are observed for the 4d–4f transitions when the photon energy matches the resonant energy; (hν = 121.0 eV) for Ce³⁺ and (hν = 124.5 eV) for Ce⁴⁺. This results in two discrete resonant photoemission peaks in valence band spectra. The ratio of the difference of these peaks with off-resonance scans gives an indication of the relative contribution of Ce³⁺. Results from RESPES indicate reduction of CeO_2 ? x on deposition of Pd, confirming earlier findings from XPS studies.     

Segregation at the surfaces of CuxPd1 − x alloys in the presence of adsorbed S

The influence of adsorbed S on surface segregation in Cu_xPd_1 ? x alloys (S/Cu_xPd_1 ? x) was characterized over a wide range of bulk alloy compositions (x = 0.05 to 0.95) using high-throughput Composition Spread Alloy Film (CSAF) sample libraries. Top-surface and near-surface compositions of the CSAFs were measured as functions of bulk Cu composition, x, and temperature using spatially resolved low energy ion scattering spectroscopy (LEISS) and X-ray photoemission spectroscopy (XPS). Preferential segregation of Cu to the top-surface of the S/Cu_xPd_1 ? x CSAF was observed at all bulk compositions, x, but the extent of Cu segregation to the S/Cu_xPd_1 ? x surface was lower than the Cu segregation to the surface of a clean Cu_xPd_1 ? x CSAF, clear evidence of an S-induced “segregation reversal.” The Langmuir–McLean formulation of the Gibbs isotherm was used to estimate the enthalpy and entropy of Cu segregation to the top-surface, ΔH_seg(x) and ΔS_seg(x), at saturation sulfur coverages. While Cu segregation to the top-surface of the clean Cu_xPd_1 ? x is exothermic (ΔH_seg < 0) for all bulk Cu compositions, it is endothermic (ΔH_seg > 0) for S/Cu_xPd_1 ? x. Segregation to the S/Cu_xPd_1 ? x surface is driven by entropy. Changes in segregation patterns that occur upon adsorption of S onto Cu_xPd_1 ? x appear to be related to formation of energetically favored PdS bonds at the surface, which counterbalance the enthalpic driving forces for Cu segregation to the clean surface.     

Maximum magnetic entropy change modulated toward room temperature in perovskite manganites La0.7−xNdx(Ca,Sr)0.3MnO3

With Nd³⁺ doping and Ca²⁺, Sr²⁺ modulating in the sol–gel technique, a series of polycrystalline perovskite samples La_0.7?xNd_x(Ca,Sr)_0.3MnO₃ (x = 0, 0.05, 0.1, 0.15, 0.20, 0.25) was prepared, their maximum magnetic entropy changes were tuned to room temperature (ΔS_H = ?1.47 J/kg K at 298 k for La_0.45Nd_0.25(Ca,Sr)_0.3MnO₃), an enhancement of the maximum magnetic entropy change (ΔS_H = ?1.89 J/kg K at 315 k) and its refrigerant capacity (about 45.3 J/kg) had also been obtained under 9 kOe magnetic field variation for La_0.55Nd_0.15(Ca,Sr)_0.3MnO₃ contrast to La_0.7(Ca,Sr)_0.3MnO₃.     

Studies on the effect of chlorides of magnesium,calcium, strontium and barium on the temperature of the sound velocity maximum of water

The effect of chlorides of magnesium, calcium, strontium and barium on the temperature of the sound velocity maximum (TSVM) of water, T_w, has been studied by determining the ultrasonic velocity using a single crystal variable path interferometer working at 3 MHz. The accuracy in ultrasonic velocity measurement is ± 0.05 m s^− 1. The ultrasonic velocity measurements were carried out at ≃ 2 °C intervals over a range of 5 °C to either side of TSVM of the solutions. The accuracy in fixing TSVM is ± 0.2 °C. The shifts in TSVM of water due to the addition of MgCl₂ and CaCl₂, (ΔT_obs), are found to be positive at low concentrations becoming maxima around the weight fraction w ≃ 2.3 × 10^− 2 for MgCl₂ and w ≃ 3.8 × 10^− 2 for CaCl₂ and becoming negative around w ≃ 5.6 × 10^− 2 for MgCl₂ and w ≃ 3.8 × 10^− 2 for CaCl₂. (ΔT_obs) for MgCl₂ > CaCl₂ > SrCl₂ > BaCl₂ indicating that the strength of the structural interactions in modifying the hydrogen-bonded structure of water is in the order Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺. The results are explained in the light of the structural properties of the anions and cations in the solutions in modifying the three dimensional hydrogen-bonded structure of water.     

Synthesis and crystallographic studies of garnet-related lithium-ion conductors Li6CaLa2Ta2O12 and Li6BaLa2Ta2O12

High-purity specimens of Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂ have been successfully synthesized by solid-state reactions. The analytical chemical compositions of these samples were in good agreement with the nominal compositions of Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂. The Rietveld refinements verified that these compounds have the garnet-type framework structure with the lattice constants of a = 12.725(2) Å for Li₆CaLa₂Ta₂O₁₂ and a = 13.001(4) Å for Li₆BaLa₂Ta₂O₁₂. All of the diffraction peaks of X-ray powder diffraction patterns were well indexed on the basis of cubic symmetry with space group Ia-3d. To make a search for Li sites, the electron density distributions were precisely examined by using the maximum entropy method. Li⁺ ions occupy partially two types of crystallographic site in these compounds: (i) tetrahedral 24d sites, and (ii) distorted octahedral 96h sites, the latter of which are the vacant sites of the ideal garnet-type structure. The present Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂ samples exhibit the conductivity σ = 2.2 × 10^? 6 S cm^? 1 at 27 °C (E_a = 0.50 eV) and σ = 1.3 × 10^? 5 S cm^? 1 at 25 °C (E_a = 0.44 eV), respectively.     

La0.8Sr0.2Cr1 − xRuxO3 − δ–Gd0.1Ce0.9O1.95 solid oxide fuel cell anodes: Ru precipitation and electrochemical performance

Composites containing La_0.8Sr_0.2Cr_1 ? xRu_xO_3 ? δ (LSCrRu) with x = 0–0.25 and Gd_0.1Ce_0.9O_1.95 (GDC) were studied as anodes in solid oxide fuel cells (SOFCs) with La_0.9Sr_0.1Ga_0.8Mg_0.2O_3 ? δ (LSGM) electrolytes. Electrode polarization resistance R_P decreased during initial SOFC operation before reaching a minimum. The decrease was more rapid, and the ultimate R_P value reached was generally lower, with increasing temperature and Ru content x. R_P was stable at longer times except for x = 0.25 where it increased slightly. SOFCs with x = 0.18 anodes at 800 °C yielded power densities as high as 0.53 W/cm² with an R_P value, including the (La,Sr)(Co,Fe)O₃–GDC cathode, of < 0.15 Ω cm². Transmission electron microscopy revealed Ru nano-particles on LSCrRu surfaces; their size increased and their density decreased with increasing temperature. Increasing the Ru content increased the density of Ru surface particles at a given time and temperature. Measured early-stage Ru surface coverage values were consistent with a model where Ru supply to the LSCrRu surface was limited by Ru bulk out-diffusion, but the coverage saturated at longer times. There was surprisingly little Ru particle coarsening over times up to 1000 h at 800 °C, with Ru particles sizes remaining < 10 nm. The cell R_P values generally decreased with increasing Ru nano-particle surface area.     

Electromagnetically Induced Transparency and optical pumping processes formed in Cs sub-micron thin cell

The Electromagnetically Induced Transparency (EIT) effect in a Λ-system formed by Cs atoms (6S_1/2 ? 6P_3/2 ? 6S_1/2) confined in an extremely thin cell (ETC) (atomic column thickness L varies in the range of 800 nm –3 µm is studied both experimentally and theoretically. It is demonstrated that when the coupling laser frequency is in exact resonance with the corresponding atomic transition, the EIT resonance parameters weakly depend on L, which allows us to detect the effect at L = λ = 852 nm. EIT process reveals a striking peculiarity in case of the coupling laser detuned by Δ from the atomic transition, namely the width of the EIT resonance rapidly increases upon an increase in Δ (an opposite effect is observed in centimeter-scale cells). The strong broadening of the EIT resonance for large values of detunings Δ is caused by the influence of atom-wall collisions on dephasing rate of coherence. The influence of the coupling laser on the velocity selective optical pumping/saturation resonances formed in ETC has been also studied. The theoretical model well describes the observed results.     

Performance of perovskite-related oxide cathodes in contact with lanthanum silicate electrolyte

The cathodic performance of selected mixed-conducting electrodes, including perovskite-type SrMn_0.6Nb_0.4O_3 ? δ, Sr_0.7Ce_0.3Mn_0.9Cr_0.1O_3 ? δ and Gd_0.6Ca_0.4Mn_0.9Ni_0.1O_3 ? δ, and Ruddlesden–Popper La₂Ni_0.5Cu_0.5O_4 + δ, LaSr₂Mn_1.6Ni_0.4O_7 ? δ, La₄Ni_3 ? xCu_xO_10 ? δ (x = 0–0.1) and La_3.95Sr_0.05Ni₂CoO_10 ? δ, was evaluated in contact with apatite-type La₁₀Si₅AlO_26.5 solid electrolyte at 873–1073 K and atmospheric oxygen pressure. The electrochemical activity of porous nickelate-based layers was found to correlate with the concentration of mobile ionic charge carriers and bulk oxygen transport, thus lowering in the series La₄Ni_2.9Cu_0.1O_10 ? δ > La₄Ni₃O_10 ? δ > La_3.95Sr_0.05Ni₂CoO_10 ? δ and decreasing on copper doping in K₂NiF₄-type La₂Ni_1 ? xCu_xO_4 ? δ. The relatively high overpotentials of nickelate-based cathodes, varying in the range ? 240 to ? 370 mV at 1073 K and current density of ? 200 mA/cm², are primarily associated with surface diffusion of silica from La₁₀Si₅AlO_26.5, which partially blocks the electrochemical reaction zone. As compared to the intergrowth nickelate materials, the manganite-based electrodes exhibit substantially worse electrochemical properties, in correlation with the level of oxygen-ionic and electronic conduction in Mn-containing phases. The effects of cation interdiffusion between the cell components as a performance-deteriorating factor are briefly discussed.     

Effect of oxygen gas pressure on orientations of Cu2O nuclei during the initial oxidation of Cu(100), (110) and (111)

The orientations of oxide nuclei during the oxidation of Cu(100), (110) and (111) surfaces have been examined by in situ transmission electron microscopy. Our results indicate that the epitaxial nucleation of oxide islands on these surfaces cannot be maintained for a whole range of oxygen gas pressure varying from 10^? 5 Torr to 750 Torr. The critical oxygen gas pressure, pO₂, leading to the transition from nucleating epitaxial to non-epitaxial oxide nuclei shows a dependence on the crystallographic orientations of the Cu substrates with pO₂⁽¹⁰⁰⁾ > pO₂⁽¹¹¹⁾ > pO₂⁽¹¹⁰⁾. By fitting the experimentally determined critical oxygen pressures to a kinetic model, we find that such dependence can be attributed to the effect of surface orientations of the Cu substrates on the oxygen surface adsorption and diffusion, which dominate the kinetic processes of oxide nucleation.     

Electrical and structural properties of stepped,partially reconstructed Au(11n) surfaces in HClO4 and H2SO4 electrolytes

We have studied the interface capacitance and the voltammograms of Au(11n) (n = 5, 7, 11, 17) and of Au(100) electrodes in 5 mM HClO₄ and 5 mM H₂SO₄ after immersion into the electrolyte solution at ?0.4 V versus a saturated calomel electrode. The minima of the capacitance curves measured in positive sweeps continuously shift towards positive potentials as function of 1/n. All voltammograms, even that of Au(1 1 5), display peaks that are characteristic for lifting of surface reconstructions, albeit at different potentials. Thus, all vicinal surfaces appear to have at least sections that allow reconstruction. This inference is consistent with STM-profiles of an Au(1 1 9) surface which displays a wide range of local inclination angles corresponding to local (11n)-orientations with 3.5 < n < ∞. A numerical analysis of the voltammograms shows the existence of three different ranges of transition potentials for the lifting of the reconstruction. The transition potentials are assigned to three different structures of the reconstructed phase as either observed by experiment or proposed by theory.     

The effect of chemical pressure in rutheno-cuprates

We have studied the effect of negative chemical pressure in the RuGd_1.5(Ce_0.5?xPr_x)Sr₂Cu₂O_10?δ with Pr content of 0.0 ? x ? 0.2. This is also investigated using the bond length results obtained from the Rietveld refinement analysis. The c parameter and cell volume increase with x for 0.0 ? x ? 0.15. The width of the resistivity transition also increases with Pr concentration, indicating higher inhomogeneity and oxygen deficiency. The difference in the ionic valences of Pr^3+,4+ and Ce⁴⁺ causing different hole doping, the difference in the ionic radii, and oxygen stoichiometry affect the superconducting transition. The magnetoresistance shows a cusp around 135 K which lies between the antiferromagnetic and ferromagnetic transition temperatures, which is probably due to the presence of a spin glass region. There exist two magnetic transition temperatures for 0.0 ? x ? 0.2 which respectively change from T_M = 155 K to 144 K and from T_irr = 115 K to 70 K. The magnetization versus applied magnetic field isotherms at 77 K and 300 K show that the remanent magnetization and coercivity are lower for samples with higher Pr content.     

An unconditionally stable time-domain discretization on cartesian meshes for the simulation of nonuniform magnetized cold plasma

In this paper an unconditionally stable, spatially and temporally implicit time-domain discretization for nonuniform magnetized cold plasma is developed. The discrete dispersion relation is free of spurious solutions and approximates the continuous dispersion relation for well-resolved wavelengths and frequencies (kΔ ? π, ωΔ_t ? π). For a specific choice of parameters, the discrete dispersion relation approximates the continuous dispersion relation for all wavelengths and frequencies up to the Nyquist limit. A few examples, amongst them one involving mode conversion, illustrate the new method.     

Electronic core levels of hydroxyls at the surface of chromia related to their XPS O 1s signature: A DFT + U study

The Cr 2p and O 1s binding energy (BE) levels have been calculated by first principles methods for different models of hydroxylated (0001)-Cr₂O₃ surfaces. Several surface terminations have been considered. The calculations allow us to reproduce the O 1s shifts between O in oxide and OH groups. It is found that two main effects account for the OH binding energy shifts. On the one hand, the increased covalency of the O–H bond with respect to the Cr–O bond, lowers the electronic O (1s and 2p) energy, and in consequence the BE of the core levels (O 1s) are higher. On the other hand, the lower the OH coordination number, the higher the valence and core levels energy, and the lower the BE. Consequently, mono-coordinated hydroxyls have a binding energy near that of O^2? in the oxide (ΔBE_OH–O = ? 0.2–0.0 eV). Two-fold coordinated hydroxyls have a slightly higher BE (ΔBE_OH–O = + 0.3 eV). Three-fold coordinated OH groups have a higher binding energy (ΔBE_OH–O = + 0.6?0.7 eV), corresponding to that experimentally measured for OH groups. Finally, water adsorbed above OH groups exhibits a still higher BE (ΔBE_HOH–O = + 0.9–1.0 eV). The ΔBE are slightly under-estimated under the initial state approximation, and overestimated under the final state (Z + 1) approximation.