Aptamer-oligonucleotide binding studied by capillary electrophoresis: cation effect and separation efficiency

Novel features of DNA structure, recognition and discrimination have been recently elucidated through the solution structural characterization of DNA aptamers that bind cofactors, amino acids and peptides with high affinity and specificity. Multidimensional nuclear magnetic resonance methodologies have been successfully applied to solve the solution structures. In this work, it was demonstrated that capillary electrophoresis was a powerful tool allowing the fundamental study of the binding mechanism between a DNA aptamer and three ligands, adenosine and adenylate compounds, i.e., adenosine diphosphate (ADP) and adenosine triphosphate (ATP). In order to gain further insight into this binding, thermodynamic measurements under different values of parameters (such as salt nature and its concentration (x) in the run buffer) were carried out. The results showed that dehydration at the binding interface, van der Waals interactions, H-bonding and adjustment of the aptamer recognition surface were implied in the aptamer-ligand association. As well, it was demonstrated that the addition in the medium of the sodium monovalent cation Na(+) or the nickel divalent cation Ni(2+) decreased the complex formation. Separation efficiency and peak shape can also be improved by Mg(2+) divalent cation, which increased the mass transfer kinetics during the ligand-aptamer binding process. A significant separation for the worst separated pair of peaks on the electropherogram ((ADP, ATP) peak pair) was thus achieved.     

A DNA aptamer as a new target-specific chiral selector for HPLC

In this paper, a DNA aptamer, known to bind stereospecifically the D-enantiomer of an oligopeptide, i.e., arginine-vasopressin, was immobilized on a chromatographic support. The influence of various parameters (such as column temperature, eluent pH, and salt concentration) on the L- and D-peptide retention was investigated in order to provide information about the binding mechanism and then to define the utilization conditions of the aptamer column. The results suggest that dehydration at the binding interface, charge-charge interactions, and adaptive conformational transitions contribute to the specific D-peptide-aptamer complex formation. A very significant enantioselectivity was obtained in the optimal binding conditions, the D-peptide being strongly retained by the column while the L-peptide eluted in the void volume. A rapid baseline separation of peptide enantiomers was also achieved by modulating the elution conditions. Furthermore, it was established that the aptamer column was stable during an extended period of time. This work indicates that DNA aptamers, specifically selected against an enantiomer, could soon become very attractive as new target-specific chiral selectors for HPLC.     

Probing the structure of DNA aptamers with a classic heterocycle

DNA aptamers are synthetic, single-stranded DNA oligonucleotides selected by SELEX methods for their binding with specific ligands. Here we present ethidium binding results for three related DNA aptamers (PDB code: 1OLD, 1DB6, and 2ARG)that bind L-argininamide (L-Arm). The ligand bound form of each aptamer's structure has been reported and each are found to be composed primarily of two domains consisting of a stem helical region and a loop domain that forms a binding pocket for the cognate ligand. Previous thermodynamic experiments demonstrated that the DNA aptamer 1OLD undergoes a large conformational ordering upon binding to L-Arm. Here we extend those linkage binding studies by examining the binding of the heterocyclic intercalator ethidium to each of the three aptamers by fluorescence and absorption spectrophotometric titrations. Our results reveal that ethidium binds to each aptamer with DeltaG degree's in the range of -8.7 to -9.4 kcal/mol. The stoichiometry of binding is 2:1 for each aptamer and is quantitatively diminished in the presence of L-Arm as is the overall fluorescence intensity of ethidium. Together, these results demonstrate that a portion of the bound ethidium is excluded from the aptamer in the presence of a saturating amount of L-Arm. These results demonstrate the utility of ethidium and related compounds for the probing of non-conventional DNA structures and reveal an interesting fundamental thermodynamic linkage in DNA aptamers. Results are discussed in the context of the thermodynamic stability and structure of each of the aptamers examined.     

Studies of the binding mechanism between aptamers and thrombin by circular dichroism, surface plasmon resonance and isothermal titration calorimetry

Thrombin, a multifunctional serine protease, has both procoagulant and anticoagulant functions in human blood. Thrombin has two electropositive exosites. One is the fibrinogen-binding site and the other is the heparin-binding site. Over the past decade, two thrombin-binding aptamers (15-mer and 29-mer) were reported by SELEX technique. Recently, many studies examined the interactions between the 15-mer aptamer and thrombin extensively, but the data on the difference of these two aptamers binding to thrombin are still lacking and worth investigating for fundamental understanding. In the present study, we combined conformational data from circular dichroism (CD), kinetics and thermodynamics information from surface plasmon resonance (SPR) and isothermal titration calorimetry (ITC) to compare the binding mechanism between the two aptamers with thrombin. Special attentions were paid to the formation of G-quadruplex and the effects of ions on the aptamer conformation on the binding and the kinetics discrimination between specific and nonspecific interactions of the binding. The results indicated reasonably that the 15-mer aptamer bound to fibrinogen-binding site of thrombin using a G-quadruplex structure and was dominated by electrostatic interactions, while the 29-mer aptamer bound to heparin-binding site thrombin using a duplex structure and was driven mainly by hydrophobic effects.     

Crowding Shifts the FMN Recognition Mechanism of Riboswitch Aptamer from Conformational Selection to Induced Fit

In bacteria, the binding between the riboswitch aptamer domain and ligand is regulated by environmental cues, such as low Mg²⁺ in macrophages during pathogenesis to ensure spatiotemporal expression of virulence genes. Binding was investigated between the flavin mononucleotide (FMN) riboswitch aptamer and its anionic ligand in the presence of molecular crowding agent without Mg²⁺ ion, which mimics pathogenic conditions. Structural, kinetic, and thermodynamic analyses under the crowding revealed more dynamic conformational rearrangements of the FMN riboswitch aptamer compared to dilute Mg²⁺‐containing solution. It is hypothesized that under crowding conditions FMN binds through an induced fit mechanism in contrast to the conformational selection mechanism previously demonstrated in dilute Mg²⁺solution. Since these two mechanisms involve different conformational intermediates and rate constants, these findings have practical significance in areas such as drug design and RNA engineering.     

Spectroscopic studies of the interaction between pirimicarb and calf thymus DNA

The interaction between pirimicarb and calf thymus DNA in physiological buffer (pH 7.4) was investigated with the use of Neutral Red (NR) dye as a spectral probe by UV-vis absorption, fluorescence and circular dichroism (CD) spectroscopy, as well as viscosity measurements and DNA melting techniques. The results revealed that an intercalation binding should be the interaction mode of pirimicarb to DNA. CD spectra indicated that pirimicarb induced conformational changes of DNA. The binding constants of pirimicarb with DNA were obtained by the fluorescence quenching method. The thermodynamic parameters, enthalpy change (ΔHθ) and entropy change (ΔSθ) were calculated to be -52.13±2.04 kJ mol(-1) and -108.8±6.72 J mol(-1) K(-1) according to the van't Hoff equation, which suggested that hydrogen bonds and van der Waals forces might play a major role in the binding of pirimicarb to DNA. Further, the alternative least squares (ALS) method was applied to resolve a complex two-way array of the absorption spectra data, which provided simultaneously the concentration information for the three reaction components, pirimicarb, NR and DNA-NR. This ALS analysis indicated that the intercalation of pirimicarb into the DNA by substituting for NR in the DNA-NR complex.     

Binding of Dioxopromethazine Hydrochloride with Human Serum Albumin and Its Effect on the Conformation of the Protein

The interaction between dioxopromethazine hydrochloride (DPZ) and human serum albumin (HSA), in vitro, was investigated by means of fluorescence, absorption and circular dichroism (CD) spectroscopy. The results obtained from analysis of the fluorescence spectra indicate that DPZ has a strong ability to quench the intrinsic fluorescence of HSA through a static quenching mechanism. The HSA?CDPZ binding distance was determined to be less than 7?nm, suggesting that energy transfer from HSA to DPZ may occur. The thermodynamic parameters of the interaction between DPZ and HSA were measured according to the van??t Hoff equation. The negative enthalpy change (??H ⁰) and positive entropy change (??S ⁰) values indicate that hydrophobic and electrostatic interactions play major roles in the binding between DPZ and HSA. The binding process was a favorable process in which the Gibbs energy change (??G ⁰) is negative. The results of displacement experiments suggested that DPZ is located in site I of HSA within subdomain IIA. In addition, the results of absorption, synchronous fluorescence and CD spectra show that binding of DPZ with HSA can induce conformational changes in HSA.     

Study binding of Al-curcumin complex to ds-DNA, monitoring by multispectroscopic and voltammetric techniques

In this work a complex of Al3+ with curcumin ([Al(curcumin) (EtOH)2](NO3)2) was synthesized and characterized by UV-vis, FT-IR, elemental analysis and spectrophotometric titration techniques. The mole ratio plot revealed a 1:1 complex between Al3+ and curcumin in solution. For binding studies of this complex to calf thymus-DNA various methods such as: UV-vis, fluorescence, circular dichroism (CD), FT-IR spectroscopy and cyclic voltammetry were used. The intrinsic binding constant of ACC with DNA at 25°C was calculated by UV-vis and cyclic voltammetry as 2.1×10(4) and 2.6×10(4), respectively. The thermodynamic studies showed that the reaction is enthalpy and entropy favored. The CD results showed that only the Δ-ACC interacts with DNA and the Δ-ACC form has not any tendency to interact with DNA, also the pure curcumin has not any stereoselective interaction with CT-DNA. Fluorimetric studies showed that fluorescence enhancement was initiated by a static process in the ground state. The cyclic voltammetry showed that ACC interact with DNA with a binding site size of 2. From the FT-IR we concluded that the Δ-ACC interacts with DNA via partial electrostatic and minor groove binding. In comparison with previous works it was concluded that curcumin significantly reduced the affinity of Al3+ to the DNA.     

Ultrasensitive Detection and Binding Mechanism of Cocaine in an Aptamer‐based Single‐molecule Device

Aptamer serves as a potential candidate for the micro‐detection of cocaine due to its high specificity, high affinity and good stability. Although cocaine aptasensors have been extensively studied, the binding mechanism of cocaine‐aptamer interactions is still unknown, which limits the structural refinement in the design of an aptamer to improve the performance of cocaine aptasensors. Herein, we report a label‐free, ultrasensitive detection of single‐molecule cocaine‐aptamer interaction by using an electrical nanocircuit based on graphene‐molecule‐ graphene single‐molecule junctions (GMG‐SMJs). Real‐time recordings of cocaine‐aptamer interactions have exhibited distinct current oscillations before and after cocaine treatment, revealing the dynamic mechanism of the conformational changes of aptamer upon binding with cocaine. Further concentration‐dependent experiments have proved that these devices can act as a single‐molecule biosensor with at least a limit of detection as low as 1 nmol?L^–1. The method demonstrated in this work provides a novel strategy for shedding light on the interaction mechanism of biomolecules as well as constructing new types of aptasensors toward practical applications.     

ATP detection using a label-free DNA aptamer and a cationic tetrahedralfluorene

A simple and sensitive method for ATP detection using a label-free DNA aptamer as the recognition element and ethidium bromide (EB) as the signal reporter is reported. The ATP-binding aptamer undergoes a conformational switch from the aptamer duplex to the aptamer/target complex upon target binding, which induces the fluorescence change of intercalated EB emission. Good selectivity between ATP and CTP, GTP or UTP has been demonstrated, which is due to the specific recognition between the ATP aptamer and ATP. Using EB alone as a signal reporter, the ATP detection limit was estimated to be approximately 0.2 mM. When a light harvesting cationic tetrahedralfluorene was used as an energy donor to sensitize the intercalated EB emission, a 10-fold increase in detection limit and a 2-fold increase in detection selectivity was demonstrated. The sensitivity and selectivity of the tetrahedralfluorene sensitized assay is comparable to or better than most fluorescent ATP assays with multiple labels.     

Heterocyclic diamidine interactions at AT base pairs in the DNA minor groove: effects of heterocycle differences, DNA AT sequence and length

Given the increasing significance of diamidines as DNA-targeted therapeutics and biotechnology reagents, it is important to establish the variations in thermodynamic quantities that characterize the interactions of closely related compounds to different sequence AT binding sites. In this study, an array of methods including biosensor-surface plasmon resonance (SPR), isothermal titration microcalorimetry (ITC), circular dichroism (CD), thermal melting (Tm) and molecular modeling have been used to characterize the binding of dicationic diamidines related to DB75 (amidine-phenyl-furan-phenyl-amidine) with alternating and nonalternating AT sequences. Conversion of the central furan of DB75 to other similar groups, such as thiophene or selenophene, can yield compounds with increased affinity and sequence binding selectivity for the minor groove. Calorimetric measurements revealed that the thermodynamic parameters (Delta G, Delta H, Delta S) that drive diamidine binding to alternating and nonalternating oligomers can be quite different and depend on both DNA sequence and length. Small changes in a compound can have major effects on DNA interactions. By choosing an appropriate central group it is possible to "tune" the shape of the molecule to match DNA for enhanced affinity and sequence recognition.     

Optical sensors based on hybrid aptamer/conjugated polymer complexes

Single-stranded DNA (aptamer) can specifically bind potassium ions or human alpha-thrombin. When binding takes place, the aptamer undergoes a conformational transition from an unfolded to a folded structure. This conformational change of the negatively charged oligonucleotide can be detected by adding a water-soluble, cationic polythiophene derivative, which transduces the new complex formation into an optical (colorimetric or fluorometric) signal without any labeling of the probe or of the target. This simple and rapid methodology has enabled the detection of human thrombin in the femtomole range. This new biophotonic tool can easily be applied to the detection of various other proteins as well as being useful in the high-throughput screening of new drugs.     

Multi-spectroscopic Investigations of Aspirin and Colchicine Interactions with Human Hemoglobin: Binary and Ternary Systems

The interactions of colchicine (COL) and aspirin (ASA) with human hemoglobin (HB) was studied by fluorescence, UV/vis absorption, resonance light scattering, synchronous fluorescence and circular dichroism (CD) spectroscopic techniques under physiological conditions. The inherent binding information, including the quenching mechanism, binding constants, number of binding sites, effective quenching constant, fraction of the initial fluorescence and thermodynamic parameters were determined by the fluorescence quenching technique at different temperatures. The results proved that the mechanism of fluorescence quenching of HB by COL and ASA is due to formation of HB–drug complexes in the binary and ternary systems. The distance between the acceptor drugs and HB was estimated by Förster’s equation on the basis of fluorescence energy transfer. In addition, according to the synchronous fluorescence spectra of HB, the results showed that the fluorescence quenching of HB originated solely from the tryptophan residues and indicated a conformational change for HB caused by addition of the drugs. Far-UV CD spectra of HB were recorded before and after the addition of ASA and COL both as binary and ternary systems. An increase in intensity of the positive CD peak of HB was observed in the presence of these drugs. The results were interpreted as excited state interactions between the aromatic residues of the HB binding sites and the drugs bound to them.     

Recognition of guanine-guanine mismatches by the dimeric form of 2-amino-1,8-naphthyridine.

Dimeric 2-amino-1,8-naphthyridine selectively binds to a G-G mismatch with high affinity (K(d) = 53 nM). We have investigated a binding mechanism of naphthyridine dimer 2 to a G-G mismatch by spectroscopic studies, thermodynamic analysis, and structure-activity studies for the thermal stabilization of the mismatch. 1H NMR spectra of a complex of 2 with 9-mer duplex d(CATCGGATG)2 containing a G-G mismatch showed that all hydrogens in two naphthyridine rings of 2 were observed upfield compared to those of 2 in a free state. The 2D-NOESY experiments showed that each naphthyridine of 2 binds to a guanine in the G-G mismatch within the pi-stack. In CD spectra, a large conformational change of the G-G mismatch-containing duplex was observed upon complex formation with 2. Isothermal calorimetry titration of 2 binding to the G-G mismatch showed that the stoichiometry for the binding is about 1:1 and that the binding is enthalpy-controlled. It is clarified by structure-activity studies that show (i) the linker connecting two naphthyridine rings was essential for the stabilization of the G-G mismatch, (ii) the binding efficiency was very sensitive to the linker structure, and (iii) the binding of two naphthyridines to each one of two Gs in the G-G mismatch is essential for a strong stabilization. These results strongly supported the intercalation of both naphthyridine rings of 2 into DNA base pairs and the formation of a hydrogen bonded complex with the G-G mismatch.     

Mechanism and conformational studies of farrerol binding to bovine serum albumin by spectroscopic methods

The mechanism and conformational changes of farrerol binding to bovine serum albumin (BSA) were studied by spectroscopic methods including fluorescence quenching technique, UV–vis absorption, circular dichroism (CD) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy under simulative physiological conditions. The results of fluorescence titration revealed that farrerol could strongly quench the intrinsic fluorescence of BSA through a static quenching procedure. The thermodynamic parameters enthalpy change and entropy change for the binding were calculated to be −29.92 kJ mol⁻¹ and 5.06 J mol⁻¹ K⁻¹ according to the van’t Hoff equation, which suggested that the both hydrophobic interactions and hydrogen bonds play major role in the binding of farrerol to BSA. The binding distance r deduced from the efficiency of energy transfer was 3.11 nm for farrerol–BSA system. The displacement experiments of site markers and the results of fluorescence anisotropy showed that warfarin and farrerol shared a common binding site I corresponding to the subdomain IIA of BSA. Furthermore, the studies of synchronous fluorescence, CD and FT-IR spectroscopy showed that the binding of farrerol to BSA induced conformational changes in BSA.     

Direct Measurement of Through-Bond Effects in Molecular Multivalent Interactions

Multivalent interactions occur throughout biology, and have a number of characteristics that monovalent interactions do not. However, it remains challenging to directly measure the binding force of molecular multivalent interactions and identify the mechanism of interactions. In this study, the specific interaction between bivalent aptamer and thrombin has been measured directly and quantitatively by force-induced remnant magnetization spectroscopy to investigate the binding force and through-bond effects of the multivalent interactions. The measured differential binding forces enable through-bond effects in thrombin–aptamer complexes to be identified, where aptamer binding at exosite II produces visible effects on their binding at exosite I and vice versa. This method might be suitable for practical applications in the design of high-performance ligands.     

Aptamer-based electrochemical sensors that are not based on the target binding-induced conformational change of aptamers

This study describes a new kind of aptamer-based electrochemical sensor that is not based on the target binding-induced conformational change of the aptamers by using a 15-mer thrombin-binding aptamer (5'-GGTTGGTGTGGTTGG-3') as the model oligonucleotide. The sensors are developed by first self-assembling the aptamer (i.e. a thrombin-binding aptamer) onto an Au electrode and then hybridizing the assembled aptamer with a ferrocene (Fc)-labeled short aptamer-complementary DNA oligonucleotide to form an electroactive double-stranded DNA (ds-DNA) oligonucleotide onto the Au electrode. The binding of the target (i.e. thrombin) towards the aptamer essentially destroys the Watson-Crick helix structure of the ds-DNA oligonucleotide assembled onto the electrode and leads to the dissociation of the Fc-labeled short complementary DNA oligonucleotide from the electrode surface to the solution, resulting in a decrease in the current signal obtained at the electrode, which can be used for the determination of the target. With the thrombin-binding aptamer as the model oligonucleotide, the current decrease obtained with the aptamer-based electrochemical sensors is linear with the concentration of thrombin within the concentration range from 0 to 10 nM (DeltaI/nA = 6.7C(thrombin)/nM + 2.8, gamma = 0.975). Unlike most kinds of existing aptamer-based electrochemical sensor, the electrochemical aptasensors demonstrated here are not based on the conformational change of the aptamers induced by the specific target binding. Moreover, the aptasensors are essentially label-free and are very responsive toward the targets. This study may pave a facile and general way to the development of aptamer-based electrochemical sensors.     

利福布汀与人血清白蛋白相互作用的光谱研究

用荧光光谱法和圆二色谱法研究了利福布汀(RB)与人血清白蛋白(HSA)的相互作用. 结果表明, RB与HSA之间的相互作用主要是疏水作用, 作用机制是静态猝灭与动态猝灭的结合. 其结合常数(Ka)在106数量级, 说明RB和HSA有很强的结合. 此外, 探讨了金属离子(Cu2+, Zn2+, Mg2+ 和Ca2+)对RB与HSA结合常数的影响. 同步荧光光谱和圆二色谱数据表明, RB可导致HSA的构象改变.     

Co-operative intra-protein structural response due to protein–protein complexation revealed through thermodynamic quantification: study of MDM2-p53 binding

The p53 protein activation protects the organism from propagation of cells with damaged DNA having oncogenic mutations. In normal cells, activity of p53 is controlled by interaction with MDM2. The well understood p53-MDM2 interaction facilitates design of ligands that could potentially disrupt or prevent the complexation owing to its emergence as an important objective for cancer therapy. However, thermodynamic quantification of the p53-peptide induced structural changes of the MDM2-protein remains an area to be explored. This study attempts to understand the conformational free energy and entropy costs due to this complex formation from the histograms of dihedral angles generated from molecular dynamics simulations. Residue-specific quantification illustrates that, hydrophobic residues of the protein contribute maximum to the conformational thermodynamic changes. Thermodynamic quantification of structural changes of the protein unfold the fact that, p53 binding provides a source of inter-element cooperativity among the protein secondary structural elements, where the highest affected structural elements (α2 and α4) found at the binding site of the protein affects faraway structural elements (β1 and Loop1) of the protein. The communication perhaps involves water mediated hydrogen bonded network formation. Further, we infer that in inhibitory F19A mutation of P53, though Phe19 is important in the recognition process, it has less prominent contribution in the stability of the complex. Collectively, this study provides vivid microscopic understanding of the interaction within the protein complex along with exploring mutation sites, which will contribute further to engineer the protein function and binding affinity.