An endochronic plasticity formulation for filled rubber

The nature of elastomeric material demands the consideration of finite deformations, nonlinear elasticity including damage as well as rate-dependent and rate-independent dissipative properties. While many models accounting for these effects have been refined over time to do better justice to the real behavior of rubber-like materials, the realistic simulation of the elastoplastic characteristics for filled rubber remains challenging.The classical elastic-ideal-plastic formulation exhibits a distinct yield-surface, whereas the elastoplastic material behavior of filled rubber components shows a yield-surface free plasticity. In order to describe this elastoplastic deformation of a material point adequately, a physically based endochronic plasticity model was developed and implemented into a Finite Element code. The formulation of the ground state elastic characteristics is based on Arruda and Boyce (1993) eight-chain model. The evolution of the constitutive equations for the nonlinear endochronic elastoplastic response are derived in analogy to the Bergström–Boyce finite viscoelasticity model discussed by Dal and Kaliske (2009).     

Effects of matrix inelasticity on the overall hysteretic behavior of TiNi-SMA fiber composites

The effects of the inelastic deformation of the matrix on the overall hysteretic behavior of a unidirectional titanium–nickel shape-memory alloy (TiNi-SMA) fiber composite and on the local pseudoelastic response of the embedded SMA fibers are studied under the isothermal loading and unloading condition. The multiaxial phase transformation of the SMA fibers is predicted using the phenomenological constitutive equations which can describe the two-step deformation due to the rhombohedral and martensitic transformations, and the inelastic behavior of the matrix material using the standard nonlinear viscoplastic model. The average behavior of the SMA composite is evaluated with the micromechanical method of cells. It is observed that the inelastic deformation of the matrix due to prior tension results in a compressive stress in the matrix after unloading of the SMA composite and this residual stress impedes the complete recovery of the pseudoelastic strain of the SMA fibers. This explains that a closed hysteresis behavior of the SMA composite is no longer observed in contrast with the case that an elastic behavior of matrix is assumed. The predicted local stress–strain behavior indicates that the cyclic response of matrix is crucial to the design of the hysteretic performance of the SMA composite under the repeated loading conditions.     

96.5Sn-3.5Ag钎料合金的时相关单轴应变循环变形行为及其本构关系研究

在室温下对96.5Sn-3.5Ag钎料合金进行了不同加载波形下的单轴应变循环实验。研究了在具有不同保持时间、不同应变率、不同应变幅值及其历史对材料的循环变形行为的影响。基于材料时相关变形行为,提出了统一粘塑性本构模型,并对该材料的变形行为进行本构模拟。实验结果表明:该钎料合金单轴变形行为具有应变率、保持时间以及应变幅值依赖性。本构关系的预言结果与实验结果吻合得一致性说明该种模型能够很好地描述材料的单轴应变循环变形行为。     

Micromechanics-based elastic-damage analysis of laminated composite structures

Based on the micromechanics-based constitutive model, derived in our preceding work [Lee, H.K., Pyo, S.H., 2009. A 3D-damage model for fiber-reinforced brittle composites with microcracks and imperfect interfaces. Journal of Engineering Mechanics-ASCE, in press, doi:10.1061/(ASCE)EM.1943.7889.0000039.], incorporating a multi-level damage model and a continuum damage model, the overall elastic behavior and damage evolution of laminated composite structures are studied in detail. The constitutive model is implemented into the finite element program ABAQUS using a user-subroutine UMAT to solve boundary value problems of the composite structures. The validity of the implemented constitutive model is assured by comparing the predicted stress–strain curves with experimental data available in literature under uniaxial tension with various fiber orientations. The results show that the proposed micromechanics-based constitutive model accurately predict the overall elastic-damage behavior of laminated composite structures having different material compositions, thicknesses and boundary conditions.     

A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition

In order to predict the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy, the hot compression tests were conducted in the strain rate range of (0.001–0.1)s⁻¹ and the forming temperature range of (573–723) K. Based on the experimental results, Johnson-Cook model was found inadequate to describe the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy. Therefore, a new phenomenological constitutive model is proposed, considering the coupled effects of strain, strain rate and forming temperature on the material flow behavior of Al-Zn-Mg-Cu alloy. In the proposed model, the material constants are presented as functions of strain rate. The proposed constitutive model correlates well with the experimental results confirming that the proposed model can give an accurate and precise estimate of flow stress for the Al-Zn-Mg-Cu alloy investigated in this study.     

A composites-based hyperelastic constitutive model for soft tissue with application to the human annulus fibrosus

This paper presents a composites-based hyperelastic constitutive model for soft tissue. Well organized soft tissue is treated as a composite in which the matrix material is embedded with a single family of aligned fibers. The fiber is modeled as a generalized neo-Hookean material in which the stiffness depends on fiber stretch. The deformation gradient is decomposed multiplicatively into two parts: a uniaxial deformation along the fiber direction and a subsequent shear deformation. This permits the fiber-matrix interaction caused by inhomogeneous deformation to be estimated by using effective properties from conventional composites theory based on small strain linear elasticity and suitably generalized to the present large deformation case. A transversely isotropic hyperelastic model is proposed to describe the mechanical behavior of fiber-reinforced soft tissue. This model is then applied to the human annulus fibrosus. Because of the layered anatomical structure of the annulus fibrosus, an orthotropic hyperelastic model of the annulus fibrosus is developed. Simulations show that the model reproduces the stress-strain response of the human annulus fibrosus accurately. We also show that the expression for the fiber-matrix shear interaction energy used in a previous phenomenological model is compatible with that derived in the present paper.     

On constitutive modelling of porous neo-Hookean composites

In this paper a hyperelastic constitutive model is developed for neo-Hookean composites with aligned continuous cylindrical pores in the finite elasticity regime. Although the matrix is incompressible, the composite itself is compressible because of the existence of voids. For this compressible transversely isotropic material, the deformation gradient can be decomposed multiplicatively into three parts: an isochoric uniaxial deformation along the preferred direction of the material (which is identical to the direction of the cylindrical pores here); an equi-biaxial deformation on the transverse plane (the plane perpendicular to the preferred direction); and subsequent shear deformation (which includes “along-fibre” shear and transverse shear). Compared to the multiplicative decomposition used in our previous model for incompressible fibre reinforced composites [Guo, Z., Peng, X.Q., Moran, B., 2006, A composites-based hyperelastic constitutive model for soft tissue with application to the human annulus fibrosus. J. Mech. Phys. Solids 54(9), 1952–1971], the equi-biaxial deformation is introduced to achieve the desired volume change. To estimate the strain energy function for this composite, a cylindrical composite element model is developed. Analytically exact strain distributions in the composite element model are derived for the isochoric uniaxial deformation along the preferred direction, the equi-biaxial deformation on the transverse plane, as well as the “along-fibre” shear deformation. The effective shear modulus from conventional composites theory based on the infinitesimal strain linear elasticity is extended to the present finite deformation regime to estimate the strain energy related to the transverse shear deformation, which leads to an explicit formula for the strain energy function of the composite under a general finite deformation state.     

Viscoelastic response of a unidirectional composite containing two viscoelastic constituents

Viscoelastic response of a unidirectional aramid fiber-reinforced epoxy was measured. Procedures to measure all five time-dependent material properties necessary to describe behavior of a transversely isotropic continuous-fiber unidirectional lamina were implemented. The Iosipescu shear method was used to measure in-plane and interlaminar shear viscoelastic response. Applicability of the Schapery single-integral nonlinear viscoelastic constitutive model to describe time-dependent mechanical behavior of a laminated composite material containing two viscoelastic phases was explored. Linear and nonlinear viscoelastic parameters for this two-viscoelastic constituent composite were measured and data summaries are presented in the paper. The time-dependent behavior of this two-viscoelastic constituent composite material was found to be complex, but the Schapery nonlinear viscoelastic model did adequately fit the response of such a composite to uniaxial applied loads.Paper was presented at the 1988 SEM Spring Conference on Experimental Mechanics held in Portland, OR on June 5–10.     

A constitutive theory for shape memory polymers. Part II: A linearized model for small deformations

A constitutive theory is developed for shape memory polymers. It is to describe the thermomechanical properties of such materials under large deformations. The theory is based on the idea, which is developed in the work of Liu et al. [2006. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modelling. Int. J. Plasticity 22, 279-313], that the coexisting active and frozen phases of the polymer and the transitions between them provide the underlying mechanisms for strain storage and recovery during a shape memory cycle. General constitutive functions for nonlinear thermoelastic materials are used for the active and frozen phases. Also used is an internal state variable which describes the volume fraction of the frozen phase. The material behavior of history dependence in the frozen phase is captured by using the concept of frozen reference configuration. The relation between the overall deformation and the stress is derived by integration of the constitutive equations of the coexisting phases. As a special case of the nonlinear constitutive model, a neo-Hookean type constitutive function for each phase is considered. The material behaviors in a shape memory cycle under uniaxial loading are examined. A linear constitutive model is derived from the nonlinear theory by considering small deformations. The predictions of this model are compared with experimental measurements.     

A constitutive theory for shape memory polymers. Part I: Large deformations

A constitutive theory is developed for shape memory polymers. It is to describe the thermomechanical properties of such materials under large deformations. The theory is based on the idea, which is developed in the work of Liu et al. [2006. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Int. J. Plasticity 22, 279-313], that the coexisting active and frozen phases of the polymer and the transitions between them provide the underlying mechanisms for strain storage and recovery during a shape memory cycle. General constitutive functions for nonlinear thermoelastic materials are used for the active and frozen phases. Also used is an internal state variable which describes the volume fraction of the frozen phase. The material behavior of history dependence in the frozen phase is captured by using the concept of frozen reference configuration. The relation between the overall deformation and the stress is derived by integration of the constitutive equations of the coexisting phases. As a special case of the nonlinear constitutive model, a neo-Hookean type constitutive function for each phase is considered. The material behaviors in a shape memory cycle under uniaxial loading are examined. A linear constitutive model is derived from the nonlinear theory by considering small deformations. The predictions of this model are compared with experimental measurements.     

Effect of the silicon-carbide micro- and nanoparticle size on the thermo-elastic and time-dependent creep response of a rotating Al–SiC composite cylinder

The history of stresses and creep strains of a rotating composite cylinder made of an aluminum matrix reinforced by silicon carbide particles is investigated. The effect of uniformly distributed SiC micro- and nanoparticles on the initial thermo-elastic and time-dependent creep deformation is studied. The material creep behavior is described by Sherby’s constitutive model where the creep parameters are functions of temperature and the particle sizes vary from 50 nm to 45.9 μm. Loading is composed of a temperature field due to outward steady-state heat conduction and an inertia body force due to cylinder rotation. Based on the equilibrium equation and also stress-strain and strain-displacement relations, a constitutive second-order differential equation for displacements with variable and time-dependent coefficients is obtained. By solving this differential equation together with the Prandtl–Reuss relation and the material creep constitutive model, the history of stresses and creep strains is obtained. It is found that the minimum effective stresses are reached in a material reinforced by uniformly distributed SiC particles with the volume fraction of 20% and particle size of 50 nm. It is also found that the effective and tangential stresses increase with time at the inner surface of the composite cylinder; however, their variation at the outer surface is insignificant.     

The use of a virtual configuration in formulating constitutive equations for residually stressed elastic materials

Residual stress is the stress present in the unloaded equilibrium configuration of a body. Because residual stresses can significantly affect the mechanical behavior of a component, the measurement of these stresses and the prediction of their effect on mechanical behavior are important objectives in many engineering problems. Common methods for the measurement of residual stresses include various destructive experiments in which the body is cut to relieve the residual stress. The resulting strain is measured and used to approximate the original residual stress in the intact body. In order to predict the mechanical behavior of a residually stressed body, a constitutive model is required that includes the influence of the residual stress.In this paper we present a method by which the data obtained from standard destructive experiments can be used to derive constitutive equations that describe the mechanical behavior of elastic residually stressed bodies. The derivation is based on the idea that for each infinitesimal neighborhood in a residually stressed body, there exists a corresponding stress free configuration. We refer to this stress free configuration as the virtual configuration of the infinitesimal neighborhood. The derivation requires that the constitutive equation for the stress free material be known and invertible; it is used to relate the residual stress to the deformation of the virtual configuration into the residually stressed configuration. Although the concept of the virtual configuration is central to the derivation, the geometry of this configuration need not be determined explicitly, and it need not be achievable experimentally, in order to construct the constitutive equation for the residually stressed body.The general mathematical forms of constitutive equations valid for residually stressed elastic materials have been derived previously for a number of cases. These general forms contain numerous unknown material-response functions or material constants that must be determined experimentally. In contrast, the method presented here results in a constitutive equation that is an explicit function of residual stress and includes only the material parameters required to describe the stress free material.After presenting the method for the derivation of constitutive equations, we explore the relationship between destructive experiments and the theory used in the derivation. Specifically, we discuss the use of the theory to improve the design of destructive experiments, and the use of destructive experiments to obtain the data required to construct the constitutive equation for a particular material.     

Large deflection of a non-linear,elastic, asymmetric Ludwick cantilever beam subjected to horizontal force,vertical force and bending torque at the free end

The investigated cantilever beam is characterized by a constant rectangular cross-section and is subjected to a concentrated constant vertical load, to a concentrated constant horizontal load and to a concentrated constant bending torque at the free end. The same beam is made by an elastic non-linear asymmetric Ludwick type material with different behavior in tension and compression. Namely the constitutive law of the proposed material is characterized by two different elastic moduli and two different strain exponential coefficients. The aim of this study is to describe the deformation of the beam neutral surface and particularly the horizontal and vertical displacements of the free end cross-section. The analysis of large deflection is based on the Euler–Bernoulli bending beam theory, for which cross-sections, after the deformation, remain plain and perpendicular to the neutral surface; furthermore their shape and area do not change. On the stress viewpoint, the shear stress effect and the axial force effect are considered negligible in comparison with the bending effect. The mechanical model deduced from the identified hypotheses includes two kind of non-linearity: the first due to the material and the latter due to large deformations. The mathematical problem associated with the mechanical model, i.e. to compute the bending deformations, consists in solving a non-linear algebraic system and a non-liner second order ordinary differential equation. Thus a numerical algorithm is developed and some examples of specific results are shown in this paper.     

Large amplitude free vibration analysis of thermally post-buckled composite doubly curved panel embedded with SMA fibers

Thermal post-buckled vibration of laminated composite doubly curved panel embedded with shape memory alloy (SMA) fiber is investigated and presented in this article. The geometry matrix and the nonlinear stiffness matrices are derived using Green–Lagrange type nonlinear kinematics in the framework of higher order shear deformation theory. In addition to that, material nonlinearity in shape memory alloy due to thermal load is incorporated by the marching technique. The developed mathematical model is discretized using a nonlinear finite element model and the sets of nonlinear governing equations are obtained using Hamilton’s principle. The equations are solved using the direct iterative method. The effect of nonlinearity both in geometric and material have been studied using the developed model and compared with those published literature. Effect of various geometric parameters such as thickness ratio, amplitude ratio, lamination scheme, support condition, prestrains of SMA, and volume fractions of SMA on the nonlinear free vibration behavior of thermally post-buckled composite flat/curved panel been studied in detail and reported.     

Photomechanics of light-activated polymers

Light-activated polymers are an exciting class of modern materials that respond mechanically when irradiated by light at particular wavelengths. While details of the mechanisms that connect the optical excitation to mechanical behavior are complex and differ from material to material, there is sufficient commonality among them to permit the development of a generalized modeling framework to describe the photomechanics. The features shared by light-activated polymers involve light interacting with the material, which triggers photochemical reactions that alter the structure of the crosslinked polymer network. Many such structural alterations result in an evolution of the polymer network, and subsequent macroscopic deformation. When this process is appropriately executed it can enable a photomechanical shape-memory effect. In this paper, we develop a three-dimensional finite-deformation modeling framework to describe the photomechanical response of light-activated polymer systems. This framework integrates four coupled phenomena that contribute to macroscopic photomechanical behavior: photophysics, photochemistry, chemomechanical coupling, and mechanical deformation. The chemomechanical coupling consists of chemically induced structural alterations of the crosslinked network that result in subsequent deformation. We describe this behavior through a decomposition of the crosslinked network into two components consisting of an original network and a photochemically altered network; both evolve during photomechanical deformation. The modeling framework presented in this paper is sufficiently general that it is applicable to light-activated polymer systems that operate with various mechanisms in each of the four areas. Using this modeling approach, we develop constitutive models for two recently developed light-activated polymer systems [Lendlein, A., Hongyan, J., Junger, O., Langer, R., 2005. Light-induced shape-memory polymers. Nature 434 (7035) 879; Scott, T.F., Schneider, A.D., Cook, W.D., Bowman, C.N., 2005. Photoinduced plasticity in crosslinked polymers. Science 308 (5728) 1615]. For the material developed by Scott and his co-workers we validate our model by measuring and numerically simulating photo-induced stress relaxation and bending deformation and obtain good agreement between measurements and predictions. Finally, we use the model to study the effects of photomechanical parameters (applied strain magnitude, irradiation time and intensity, and photoabsorber concentration) and the behavior of the network evolution rule on the material response.     

Study on wave dispersion characteristics of piezoelectric sandwich nanoplates considering surface effects

In this study, the wave propagation properties of piezoelectric sandwich nanoplates deposited on an orthotropic viscoelastic foundation are analyzed by considering the surface effects (SEs). The nanoplates are composed of a composite layer reinforced by graphene and two piezoelectric surface layers. Utilizing the modified Halpin-Tsai model, the material parameters of composite layers are obtained. The displacement field is determined by the sinusoidal shear deformation theory (SSDT). The Euler-Lagrange equation is derived by employing Hamilton’s principle and the constitutive equations of piezoelectric layers considering the SEs. Subsequently, the nonlocal strain gradient theory (NSGT) is used to obtain the equations of motion. Next, the effects of scale parameters, graphene distribution, orthotropic viscoelastic foundation, and SEs on the propagation behavior are numerically examined. The results reveal that the wave frequency is a periodic function of the orthotropic angle. Furthermore, the wave frequency increases with the increase in the SEs.

     

Fractal effect and anisotropic constitutive model for concrete

An elasto-anisotropic damage constitutive model for concrete is developed in this work. Disregarding the coupling between the isotropic and the anisotropic damage, the isotropic damage variables are defined as functions of the microcrack fractal dimension, and the anisotropic parts are expressed by the lengths of cracks in concrete which various in different directions. The Helmholtz free energy is decomposed into the elastic deforming, damage and irreversible deforming components, with the last component used to replace the plastic deformation. Therefore the damage constitutive formulas for concrete are derived based on continuum damage mechanics. Evolution laws for both isotropic and anisotropic damage variables are derived, in which the anisotropic parts are obtained by modifying an empirical model. The critical fracture stress and the fracture toughness are investigated for materials with a single fractal crack based on the fractal geometry and the Griffith fracture criterion. Numerical computation is conducted for concrete under the uniaxial and the biaxial compression. The results indicate that the material stiffness degradation can be well addressed when the anisotropic damage is incorporated; the irreversible deformation is greatly related to the behavior of the descending branch beyond the peak load. The validation of the presented model is proofed by comparing results with the experimental data. This model provides an approach to link the macro properties of a material with its micro-structure change.