SYNTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXY CARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,~(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.     

SYNTHESIS AND POLYMERIZATION OF 2-OXO-3-METHYLENE-5, 6-DIPHENYL-1,4-DIOXAN

A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,~(13)C NMR andelemental analysis. This new monomer is different from other cyclic monomers in this series,it isa solid (mp 108--109℃)and not very reactive, but still can undergo free radical ring-openingpolymerization. The free radical polymerization was carried out at 130℃. The structure of theresulting polymer was discussed and charaterized by IR, ~1H NMR, ~(13)C NMR and elementalanalysis. The molecular weight of the polymer was estimated by viscosity determination.     

SYNTHESIS AND POLYMERIZATION OF BISPHENYLENE ORTHOCARBONATE

Bisphenylene orthocarbonate (Ⅱ) was synthesized by the reaction of dicopper catecholate with carbon tetrachloride, and underwent cationic ring-opening polymerization with the introduction of phenyl group into the main chain. The obtained polymer with ester and ether group was verified by IR and ~1H NMR spectra. Based on the analysis of the polymer structures, the polymerization mechanism was proposed. Its T_m and T_(?) are 254℃and 160℃respectively. No decomposition of the polymer was observed below 320℃. The volume expansion property of the monomer during polymerization was studied by measuring the density difference between Ⅰand its polymer at various temperatures.     

通过自缩合乙烯基氧阴离子聚合制备超支化聚甲基丙烯酸羟丙酯

由甲基丙烯酸羟丙酯通过自缩合乙烯基氧阴离子聚合(self-condensing vinyl oxyanionic polymerization)制备了端羟基的超支化聚甲基丙烯酸酯. 以氢化钾(KH)和冠醚的复合物为引发剂时, 可以得到高分子量的聚合物. 用¹H NMR和¹³C NMR谱图证实了聚合物的超支化结构. 由于在聚合过程中存在质子转移反应, 引发剂与单体的摩尔比会影响所得聚合物的结构. 超支化聚合物的玻璃化转变温度在58.1～81.4 ℃之间, 且随着引发剂与单体的比例的减小而降低. 当引发剂与单体等摩尔比时, 所得聚合物的支化度为0.49.     

四配位硅单体及其共聚物的制备和结构表征

研究了直接从无定形二氧化硅出发, 与乙二醇、氢氧化钾反应, 生成高反应活性的五配位硅钾化合物, 并以此为原料与含活泼氯的3-氯丙烯反应制备出含双键官能团的四配位硅单体. 讨论了合成单体的条件如温度、反应时间、反应物浓度、溶液pH值及溶剂等因素的影响. 然后以该四配位硅单体与甲基丙烯酸甲酯(MMA)在偶氮二异丁腈(AIBN)作引发剂下进行自由基聚合得到支链含硅共聚物. 并借助于红外光谱(IR)、核磁共振(¹³C和¹H, ²⁹Si)、能谱元素分析对合成的单体进行了结构表征; 用红外光谱(IR)、热失重谱(TG)、差示扫描量热谱(DSC)、凝胶渗透色谱法(GPC)等现代测试手段对支链含硅共聚物进行了结构表征及热性能分析. IR表明四配位硅单体在1646 cm^－1处是C＝C的伸缩振动吸收峰, 在共聚物中此峰消失; TG表明共聚物在249.6 ℃才开始失重, 552 ℃有机部分失重完毕; GPC分析表明共聚物的数均分子量为8.7万.     

Synthesis,Characterization, and Photocrosslinking Properties of Poly(4‐Methacrylamidophenyl‐2′,3′‐benzostyryl Ketone)

Abstract

A new methacrylamide monomer, 4‐methacrylamidophenyl‐2′,3′‐benzostyryl ketone (MPBSK) having a free‐radical polymerizable group and a photocrosslinkable functional group, was synthesized by reacting 4‐(2′,3′‐benzocinnamoyl)aniline with methacryloyl chloride in the presence of triethyl amine. The monomer, MPBSK was polymerized in methyl ethyl ketone (MEK) at 70°C using benzoyl peroxide (BPO) as the initiator. The polymer was characterized by UV, IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The polymer was found to be soluble in several polar aprotic solvents and in chlorinated solvents but insoluble in aliphatic and aromatic hydrocarbons and in alcohols. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by disproportionation than dimerization. The glass transition temperature of the polymer was determined by differential scanning calorimetry. Thermogravimetric analysis of the polymer carried out in air reveals that it possesses good thermal stability required of a negative photoresist. The photocrosslinking property of the polymer was investigated by irradiating the polymer solution with UV light in the presence and absence of triplet photosensitizers. The effect of the solvent on the rate of photocrosslinking of the polymer was also studied.     

Well‐controlled polymerization of 2‐azidoethyl methacrylate at near room temperature and click functionalization

A functional monomer with a pendant azide moiety, 2‐azidoethyl methacrylate (AzMA), was polymerized via reversible addition‐fragmentation chain transfer (RAFT) polymerization with excellent control over the molecular weight distribution (PDI = 1.05–1.15). The subsequent copper‐catalyzed Huisgen 1,3‐dipolar cycloadditions of phenyl acetylene with polyAzMA was achieved at room temperature with high conversion. The resulting functional polymer exhibited identical ¹H NMR and IR spectra with the polymer of the same molecular structure but prepared by a prefunctionalization approach, confirming the retention of the azide side chains during the RAFT polymerization of AzMA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4300–4308, 2007     

RADIATION INDUCED SOLID-STATE POLYMERIZATION OF ACETYLENEDICARBOXYLIC ACID

ABSTRACT

Radiation induced solid-state polymerization of acetylenedicarboxylic acid was carried out at room temperature in open atmosphere and under vacuum conditions. The gray colored powder polymer obtained was insoluble in most common solvents but only partially soluble in DMSO and THF. The limiting conversion to polymer was about 5%. The polymer was characterized by IR, UV, DP-MS, DSC, TGA, and XRD. The mechanism of polymerization was elucidated from the available data. Polymerization followed a free radical mechanism. However, before the addition of monomer molecules to the growing chain, at least one of the carboxylic groups of the monomer breaks away as CO or CO₂. The formation of side group cyclization takes place. At least one of the bonds in the side cyclic group is an etheric bond. The DSC, TGA, and XRD results showed that the polymer was partially crystalline and showed no melting up to 1200°C. The mechanism of polymerization and assigned chain structure was studied by the direct pyrolysis mass spectrometric method.

The crystal structure of monomer and polymer was investigated by the XRD method. Both monomer and crystalline polymer were monoclinic with similar cell parameters. Thus, the polymerization follows a topotactic mechanism. The unpolymerized monomer retains its crystal structure and, therefore, CO or CO₂ in the monomer molecule has to be eliminated before polymerization could take place.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Copolymerization behavior of direct polycondensation of AB2 and AB monomers that forms hyperbranched aromatic polyamide copolymers

The copolymerization behavior of the one‐step direct polycondensation of 3,5‐bis‐(4‐aminophenoxy)benzoic acid (AB₂ monomer) and 3‐(4‐aminophenoxy)benzoic acid (AB monomer) was investigated by IR and ¹³C NMR measurements. IR measurements revealed that the content of the AB₂ units in the polymer was higher in the early stages of polymerization. ¹³C NMR spectra of the polymers indicated that the number of dendritic units increased slowly with increasing reaction time. The stepwise copolymerization of the AB₂ and AB monomers was also carried out, and the structure was analyzed by ¹³C NMR measurements. Copolymer synthesized stepwise by adding AB₂ monomer first (polymer II ) had more dendritic units and less terminal units as compared with the one‐step copolymer (polymer I ). Copolymer synthesized stepwise by adding AB monomer first gave a resulting copolymer (polymer III ) composed of long AB chains. The solubility of the stepwise copolymers was low, and the inherent viscosity was high in comparison with the one‐step copolymer as a result of the difference in architecture of the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3304–3310, 2001     

STUDY ON POLYMERIZATION MECHANISM OF 3, 9,-DIALLYL-3, 9, -DIBENZYL-1, 5, 7, 11-TETRAOXASPIRO [5, 5] UNDECANE

A new monomer, 3,9-diallyl-3, 9-dibenzyl-1, 5,7,11 - tetraoxa- spiro [5,5] undecane (6) was prepared by the reaction of 2- allyl- 2' - benzyl- propanediol - 1.3 with dibutyltin oxide, and then treated with CS_2. Monomer 4 could be initiated by cationic initiators to give a viscous polymer (white powder in the case of polymerization at 0℃). Upon the NMR and IR spectra of the obtained polymer, the components and their relative amount were estimated. The polymerization mechanism was discussed.     

Radical polymerization of 2-methacryloyloxyethyl phosphorylcholine in water: kinetics and salt effects

The homogeneous polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) as betaine monomer with potassium peroxydisulfate (KPS) was kinetically investigated in water by means of FT-near IR spectroscopy. The overall activation energy of the polymerization was estimated to be 12.8 kcal/mol. The initial polymerization rate (R_p) at 40 °C was given by R_p = k[KPS]^0.98[MPC]^1.9. The presence of alkaline metal halides accelerated the polymerization. The larger the radius of metal cation or halide ion was, the larger the accelerating effect was. The accelerating salt effect was explained by interactions of salt ions with ionic moieties of the propagating polymer radical and/or the MPC monomer. A kinetic study was also performed on the polymerization of MPC with KPS in water in the presence of NaCl of 2.5 mol/l. R_p at 40 °C was expressed by R_p = k[KPS]^0.6[MPC]^1.6. A very low value of 4.7 kcal/mol was obtained as the overall activation energy of the polymerization.     

A Study on the Optically Active Polymer Poly‐β‐pinene

Poly‐β‐pinene (PBP) was obtained by radiation‐induced polymerization of monomer with γ radiation. The polymerizations were conducted both in vacuum and in the presence of air at different radiation doses up to 1–3 MGy. It was found that the presence of oxygen retards the polymerization rate and reduces the polymer yields and the radiation chemical yield suggesting that the polymerization mechanism involves free radicals. It is shown that PBP can also be obtained in low yields from β‐(‐)pinene polymerization with a free radical initiator. The chemical structures of the PBP radiopolymer and PBP obtained by a free radical initiator were studied by FT‐IR and ¹³C CP‐MAS NMR spectroscopy. The data shows that the PBP obtained have highly ordered structures, which is manifested also by the very high specific optical rotation which is about 3 times that of the starting monomer in the case of the radiopolymer and about 5 times in the case of the PBP prepared with the free radical initiator. In contrast, PBP obtained in high yields by cationic polymerization shows a very low specific optical rotation, much lower than that of the starting monomer and low regularity in chemical structure has been attributed to this polymer by FT‐IR and ¹³C CP‐MAS NMR spectroscopy. It is shown that PBP with high optical activity racemizes over an acidic catalyst.     

丙烯酰胺在离子液体中的原子转移自由基聚合

在1-丁基-3-甲基咪唑四氟硼酸盐离子液体中以氯化苄为引发剂,氯化亚铜/2,2’-联吡啶为催化剂成功实现了丙烯酰胺的原子转移自由基聚合(ATRP)。用IR对聚合物的结构进行了表征,证实聚合物链端具有-Cl端基。考察了引发剂用量、催化剂和配体用量、单体用量和反应时间等因素对丙烯酰胺在离子液体中的原子转移自由基聚合的影响,结果表明,反应时间为1.5 h时转化率达到31.43%,M_n^GPC=4451,M_w/M_n=1.38。且80 ℃下丙烯酰胺在离子液体中的最佳聚合工艺条件为：单体浓度3 mol/L,引发剂浓度0.010 mol/L,催化剂浓度0.015 mol/L,反应时间1 h。     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009     

Anionic polymerization of acrylates. II. Polymerization of 2-ethylhexyl acrylate initiated by butyllithium/lithium-tert-butoxide system in tetrahydrofuran and its mixtures with toluene

The anionic polymerization of 2-ethylhexyl acrylate (EtHA) initiated with the complex butyllithium/lithium-tert-butoxide (BuLi/t-BuOLi) was investigated at ?60°C in a medium of various solvating power, i.e., in mixtures of toluene and tetrahydrofuran and in neat tetrahydrofuran. With increasing amount of THF in the mixture the attainable limiting conversion of polymerization decreases; the monomer can be polymerized quantitatively only in a toluene/THF mixture (9/1). Molecular weights of the polymers thus obtained, their distribution, and initiator efficiency are not appreciably affected by the polymerization medium. The molecular weight distribution of the products is medium-broad (M_w/M_n = 2–2.4), with a hint of bimodality. The ¹H-¹³C-NMR, and IR spectra suggest that during the polymerization there is neither any perceptible reesterification of the polymer with the alkoxide nor transmetalation of the monomer with the initiator. In a suitable medium, autotermination of propagation proceeds to a limited extent only, predominantly via intramolecular cyclization of propagating chains; in a medium with a higher content of polar THF, it prevails and terminates propagation before the polymerization of the monomer has been completed. © 1992 John Wiley & Sons, Inc.     

Atom Transfer Radical Polymerization of Butadiene Initiated by Benzyl Chloride/MoCl5 Substituted by 1-octanol/PPh3

A novel initiator system, benzyl chloride/MoCl₅ substituted by 1-octanol/triphenyl phosphine (PPh₃), was applied to the atom transfer radical polymerization (ATRP) of butadiene. The characterization revealed the linear increase of the number average molecular weight with the monomer conversion and the rather wide molecular weight distributions of the polymerization products. The microstructure of the butadiene was detected by IR and ¹H-NMR. The chlorine atom at ω –end group of the polymer and the change of valence states of molybdenum detected by UV–Vis spectra revealed that the polymerization accorded primarily with the mechanism of ATRP.     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

Synthesis and characterization of a novel soluble reactive ladder‐like polysilsesquioxane with side‐chain 2‐(4‐chloromethyl phenyl) ethyl groups

A new kind of soluble structure‐ordered ladder‐like polysilsesquioxane with reactive side‐chain 2‐(4‐chloromethyl phenyl) ethyl groups ( L ) was first synthesized by stepwise coupling polymerization. The monomer, 2‐(4‐chloromethyl phenyl) ethyltrichlorosilane ( M ), was synthesized successfully by hydrosilylation reaction with dicyclopentadienylplatinum(II) chloride (Cp₂PtCl₂) ­catalyst. Monomer and polymer structures were characterized by FT‐IR, ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), vapor pressure osmometry (VPO) and X‐ray diffraction (XRD). This novel reactive ladder‐like polymer has promise potential applications as initiator for atom transfer radical polymerization, and as precursor for a variety of advanced functional polymers. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006