液态三元Fe-Cr-Ni合金中快速枝晶生长与溶质分布规律

采用落管方法实现了液态三元Fe-Cr-Ni合金的深过冷与快速凝固,合金液滴的冷却速率和过冷度均随液滴直径的减小而迅速增大.两种成分合金近平衡凝固组织均为粗大板条状α相.在快速凝固过程中,不同直径Fe_(81.4)Cr_(13.9)Ni_(4.7)合金液滴凝固组织均为板条状α相,其固态相变特征很明显,随着过冷度增大,初生δ相由具有发达主干的粗大枝晶转变为等轴晶.Fe_(81.4)Cr_(4.7)Ni_(13.9)合金液滴凝固组织由α相晶粒组成,随着过冷度增大,初生γ相由具有发达主干的粗大枝晶转变为等轴晶,其枝晶主干长度和二次分枝间距均显著下降,晶粒内溶质的相对偏析度也明显减小,溶质Ni的相对偏析度始终大于溶质Cr.理论计算表明,与γ相相比,δ相枝晶生长速度更大.在实验获得的过冷度范围内,两种Fe-Cr-Ni合金枝晶生长过程均由热扩散控制.     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO₄)₂ with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm’s. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO₄)₂ melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process. Supported by the National Natural Science Foundation of China (Grant No. 50331040) and the Innovation Funds from Shanghai Institute of Ceramics, Chinese Academy of Sciences (Grant No. SCX0623)     

Phase conjugation, edge detection and image broadcasting using two-beam coupling configurations in photorefractive KNbO3

Two-beam coupling configurations are employed to obtain the phase conjugate image and edge extraction of an object using photorefractive KNbO₃: Fe. Also, the self-organization of a beam in the material into a hexagonal spot array is utilized to broadcast an input object to the location of each of the spots.     

A simulation study of rapid solidification and crystal configuration of Cu70Ni30 alloy

A molecular dynamics (MD) simulation study has been performed for the rapid solidification of Cu₇₀Ni₃₀ adopting the quantum Sutton-Chen many-body potentials. By analyzing the bond-types and the relation of atomic average energy versus temperature, it was demonstrated that as cooling rate being 2×10¹² K/s, the Cu₇₀Ni₃₀ formed fcc crystal structures and freezing point was found. In addition, having analyzed the transformation of microstructures and the detail of crystal growth by using atomic trace and visual method, not only could the formation of binary disordered solid solution be showed, but also the solidification of liquid metals and the crystal growth processes could be, further understood.     

Si3N4在h-AlN上的晶体化与AlN/Si3N4纳米多层膜的超硬效应

采用反应磁控溅射法制备了一系列具有不同Si₃N₄层厚度的AlN/Si₃N₄纳米多层膜,利用X射线衍射仪、高分辨透射电子显微镜和微力学探针表征了多层膜的微结构和力学性能.研究了Si₃N₄层在AlN/Si₃N₄纳米多层膜中的晶化现象及其对多层膜生长结构与力学性能的影响.结果表明,在六方纤锌矿结构的晶体AlN调制层的模板作用下,通常溅射条件下以非晶态存在的Si₃N₄层在其厚度小于约1nm时被强制晶化为结构与AlN相同的赝形晶体,AlN/Si₃N₄纳米多层膜形成共格外延生长的结构,相应地,多层膜产生硬度升高的超硬效应.Si₃N₄随层厚的进一步增加又转变为非晶态,多层膜的共格生长结构因而受到破坏,其硬度也随之降低.分析认为,AlN/Si₃N₄纳米多层膜超硬效应的产生与多层膜共格外延生长所形成的拉压交变应力场导致的两调制层模量差的增大有关. 关键词： 3N₄纳米多层膜')" href="#">AlN/Si₃N₄纳米多层膜 外延生长 赝晶体 超硬效应     

Si3N4的晶体化和ZrN/Si3N4纳米多层膜的超硬效应

研究了Si₃N₄层在ZrN/Si₃N₄纳米多层膜中的晶化现象及其对多层膜微结构与力学性能的影响. 一系列不同Si₃N₄层厚度的ZrN/Si₃N₄纳米多层膜通过反应磁控溅射法制备. 利用X射线衍射仪、高分辨透射电子显微镜和微力学探针表征了多层膜的微结构和力学性能. 结果表明，由于受到ZrN调制层晶体结构的模板作用，溅射条件下以非晶态存在的Si₃N₄层在其厚度小于0.9 nm时被强制晶化为NaCl结构的赝晶体，ZrN/Si₃N₄纳米多层膜形成共格外延生长的柱状晶，并相应地产生硬度升高的超硬效应. Si₃N₄随层厚的进一步增加又转变为非晶态，多层膜的共格生长结构因而受到破坏，其硬度也随之降低.     

深过冷条件下Co_7Mo_6金属间化合物的枝晶生长和维氏硬度研究

采用电磁悬浮和自由落体两种实验技术对二元Co-50%Mo过共晶合金中初生Co_7Mo_6金属间化合物的生长机理和维氏硬度进行了系统研究.电磁悬浮实验中,合金熔体获得的最大过冷度为203 K(0.12T_L),初生Co_7Mo_6枝晶生长速度与过冷度之间呈现幂函数关系.随着过冷度的增大,初生枝晶中Co元素含量单调递增,枝晶尺寸明显减小,并且其维氏硬度逐渐升高.在自由落体状态下,随着液滴直径的减小,合金熔体的过冷度和冷却速率均增大.当液滴直径减小到392μm以下时,初生Co_7Mo_6枝晶从小平面向非小平面形态进行转变.实验发现,深过冷条件下Co_7Mo_6化合物发生了显著的溶质截留效应,其维氏硬度与Co元素分布和形貌特征密切相关.     

AlN/Si3N4纳米多层膜的外延生长与力学性能

采用射频磁控溅射方法制备单层AlN, Si₃N₄薄膜和不同调制周期的AlN/Si₃N₄纳米多层膜.采用X射线衍射仪、高分辨透射电子显微镜和纳米压痕仪对薄膜进行表征.结果发现,多层膜中Si₃N₄层的晶体结构和多层膜的硬度依赖于Si₃N₄层的厚度.当AlN层厚度为4.0nm、 Si₃N₄层厚度 关键词： 3N₄纳米多层膜')" href="#">AlN/Si₃N₄纳米多层膜 外延生长 应力场 超硬效应     

纳秒级脉冲激光诱导Zn掺杂过程中GaN/Al2O3材料的温度分布及热形变解析分析

分析了纳秒级脉冲激光作用下GaN的激光诱导Zn的掺杂过程.利用简化的一维模型，给出一种比较直观的脉冲激光辐照下GaN/Al₂O₃材料温度分布的解析形式，得到了GaN材料表面温度与激光辐照时间的关系以及材料形变与深度的关系.在激光脉冲作用时，GaN材料表面的温度与辐照时间的平方根成正比.脉冲过后，材料温度分布梯度和热形变分布随深度发生变化，接近表面的温度梯度最大，热形变量也最大.而在连续脉冲作用时表面的温度呈锯齿状不断升高. 关键词： 激光诱导 2O₃')" href="#">GaN/Al₂O₃ 温度分布 热形变     

Synthesis and characterization of axially periodic Zn2SnO4 dendritic nanostructures

Zn2SnO4 （ZTO） nanowires with a unique dendritic nanostructure were synthesized via a simple one-step thermal evaporation and condensation process. The morphology and microstructure of the ZTO nanodendrite have been investigated by means of field emission scanning electron microscopy （SEM）, x-ray diffraction （XRD） and high-resolution transmission electron microscopy （HRTEM）. SEM observation revealed the formation of branched nanostructures and showed that each branch exhibited a unique periodic structure formed by a row of overlaid rhombohedra of ZTO nanocrystals along the axis of the nanobranch. HRTEM studies displayed that the branches grew homoepitaxially as single-crystalline nanowires from the ZTO nanowire backbone. A possible growth model of the branched ZTO nanowires is discussed. To successfully prepare branched structures would provide an opportunity for both fundamental research and practical applications, such as three-dimensional nanoelectronics, and opto-electronic nanodevices.     

液态Mg7Zn3合金快速凝固过程中微观结构演变机理的模拟研究

采用分子动力学方法对液态Mg₇Zn₃合金的快速凝固过程进行了模拟研究,并采用双体分布函数、Honeycutt-Andersen键型指数法、原子团类型指数法(CTIM)以及遗传跟踪等方法对凝固过程中团簇结构的形成、演变特性进行了分析.结果表明:在以冷速为1×10¹² K ·s^-1的凝固过程中, Zn-Zn原子之间的相互成键的概率明显增加,形成以1551,1541,1431键型为主的非晶态结构.其特征键型1551随温度变化 关键词： 液态MgZn合金 快速凝固过程 微观结构演变 分子动力学模拟     

Crystallization of amorphous Si3N4 and superhardness effect in HfC/Si3N4 nanomultilayers

HfC/Si₃N₄ nanomultilayers with various thicknesses of Si₃N₄ layer have been prepared by reactive magnetron sputtering. Microstructure and mechanical properties of the multilayers have been investigated. The results show that amorphous Si₃N₄ is forced to crystallize and grow coherently with HfC when the Si₃N₄ layer thickness is less than 0.95 nm, correspondingly the multilayers exhibit strong columnar structure and achieve a significantly enhanced hardness with the maximum of 38.2 GPa. Further increasing Si₃N₄ layer thickness leads to the formation of amorphous Si₃N₄, which blocks the coherent growth of multilayer, and thus the hardness of multilayer decreases quickly.     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

掺铑BaTiO3单晶场致应变特性的研究

系统地研究了掺铑的BaTiO₃单晶在老化后的场致应变性能.研究发现，晶体的场 致应变随老化时间的增加而增大，在老化27天后，在300V/mm的电场下，其双向场致应变可达1.11％；在较小的测试频率下（0.01Hz）也可得到0.95％的可逆的巨大的单向场致应变，在低频范围内，晶体的单向场致应变随测试频率增大而减小；研究晶体老化后的电滞回线，发现其 形状类似于蜂腰磁滞回线.实验结果表明，对BaTiO₃单晶掺杂铑元素可以大大改 善其电致伸缩性能，可能产生新的在超大应变及非线性驱动器中的应用. 关键词： 3单晶')" href="#">BaTiO₃单晶 掺铑 场致应变 老化     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

强冲击压缩下LiF，Al2O3和LiTaO3单晶的透光性

在二级轻气炮上，用高速电子相机扫描照相技术和改进的Mallory实验装置，对z切LiF，Al₂O₃(蓝宝石)和LiTaO₃单晶材料的冲击透光性进行了对比测量，并用黑密度计提取出动态图像定量化的光强对比度变化曲线.结果表明，LiF单晶在102 GPa压强下能够保持长时间的初始透光性不变，与公认的LiF具有优良的高压下透明性的认识一致.LiTaO₃单晶在实验压力(139GPa)下变成基本不透明.而Al_{关键词： 2}O₃')" href="#">Al₂O₃ LiF 3')" href="#">LiTaO₃ 光学透明性     

分子动力学模拟不同组分下CaO-Al2O3-SiO2系玻璃微观结构的转变

采用分子动力学模拟的方法研究了CaO-Al₂O₃-SiO₂系玻璃的微观结构，发现Ca/Al=1/2时CaO-Al₂O₃-SiO₂系玻璃(网硅酸盐体系)并不像传统理论认为的那样是一个完整的三维网络，而是存在一定量的非桥氧，从而从理论上进一步证实了Stebins等人的实验结果.同时也发现不同的Ca/Al比对Si和Al键接方式产生重要影响，在Ca/Al>1/2时，Al比Si容易成为网络的中间体，其首先插入网络体中间；在Ca/Al<1/2时，Si比Al容易成为网络中间体.虽然在能量上Al—O—Si占有扰势，但当Ca/Al从大于1/2变化到小于1/2时，仍有部分Al—O—Si转变成Al—O—Al和Si—O—Si，丰富了Al自回避规则的内容. 关键词： 2O₃-SiO₂')" href="#">CaO-Al₂O₃-SiO₂ 玻璃 微观结构 分子动力学     

利用聚乙烯亚胺修饰的CaCO3仿生模板合成3D花朵型二氧化硅微球

利用聚乙烯亚胺(PEI)修饰的碳酸钙仿生模板合成了具有3D花朵型形貌的SiO₂微球.通过调整碳酸钙微粒表面不同浓度PEI的吸附量实现SiO₂微球的形貌控制呈现花朵或刀锋的形状. 用XPS和SEM对制备的SiO₂微粒进行表征. 结果表明,不用浓度的PEI修饰可以较好地控制3花朵型DSiO₂微球的形貌.     

H3PAuPh与(H3PAu)2(1,4-C6H4)2光谱性质的密度泛函研究

用密度泛函(DFT)方法优化了配合物H₃PAuPh(a),(H₃PAu)₂(1,4-C₆H₄)₂(b)的基态的几何结构,并用含时密度泛函方法计算了它们的吸收光谱.结果表明配合物a与 b的最低能量吸收谱线的波长分别为257.5 nm和307.6 nm,皆具有C(2p)→Au(6p)电荷转移参与下的p_π 关键词： 激发态 光谱 密度泛函 3')" href="#">AuPH₃     

电脉冲对多晶La0.7Ca0.3MnO3比热的影响

对电脉冲诱导的不同电阻态下La_0.7Ca_0.3MnO₃样品的比热进行了研究.实验结果表明,电脉冲导致La_0.7Ca_0.3MnO₃样品比热随电阻状态发生可逆变化.比热随电阻状态的减小而减小.低温比热拟合及不同电阻状态下的比热差与温度关系说明,声子对比热的贡献不随电阻状态变化,磁性和载流子对比热的贡献是导致La_0.7Ca_0.3MnO₃样品比热变化的原因.电脉冲诱导O离子沿一维扩展性缺陷的电化学迁移,导致材料中局部区域的O离子浓度发生变化.O离子浓度的变化导致载流子浓度的变化,同时载流子浓度的变化将使得低温下磁性耦合强度发生变化,从而导致比热发生变化.