Synthesis and characterization of miktoarm star copolymer of styrene and butadiene using multifunctional macromolecular initiator

A new kind of multifunctional macromolecular initiator with Sn-C bonds and polydiene arms was synthesized by living anionic polymerization.At first,polydiene-stannum chloride(PD-SnCl_3) was prepared by the reaction of n-butyl-Li(n-BuLi),stannic chloride(SnCl_4) and diene.Then PD-SnCl_3 was used to react with the dilithium initiator to prepare the multifunctional organic macromolecular initiators.The result suggested that the initiators had a remarkable yield by GPC,nearly 90%.By using these multifunction...     

2－甲基－2－甲氧基羰基－5－次甲基－1，3－二氧环戊－4－酮的合成和阴离子聚合

本文报导了一种环状新单体，２－甲基－２－甲氧基羰基－５－次甲基－１，３－二氧环戊－４－酮的合成，并用红外、核磁及元素分析对单体和中间体的结构进行了鉴定．在－７０℃及干燥氮气保护下，用９－芴锂作阴离子５：发剂对此新单体进行了阴离子开环聚合反应的研究．聚合物的红外和核磁谱图表明：在聚合物中存在两种结构单元，这说明在聚合过程中同时存在开环和不开环的两种情况。虽然在聚合物中，这两种结构单元的量应取决于两种相应的碳阴离子的相对稳定性，但是开环聚合在热力学上是有利的，因为开环的结果形成了更稳定的羰基．用粘度法测定了聚合物的特性粘数。     

Synthesis of Hydroxy-Functional PMMA Macromonomers by Anionic Polymerization

Living anionic polymerization has been utilized to synthesize hydroxy end-functionalized PMMA macromonomers with styryl or allyl functionalities as the polymerizable end-groups. Protected hydroxy-functionalized alkyl lithium initiators have been used to initiate anionic polymerization of MMA. Subsequently the living chains with protected hydroxyl function have been terminated using 4-vinylbenzyl chloride (4-VBC) or allyl methacrylate (ALMA) to form α-hydroxy-ω-styryl and α-hydroxy-ω-allyl PMMA, respectively. These protected hydroxy-functionalized PMMA macromonomers have been characterized by GPC and ¹H-NMR. Termination using 4-VBC led to 50% functionalization, whereas that using allyl methacrylate led to 100% functionalization of the hydroxy-PMMA.     

Preparation and characterization of pure polyacrylate polymer colloid through emulsion polymerization using a novel initiator

A series of acrylic polymer colloids were prepared via semi-continuous seeded emulsion polymerization of BA and MMA in water phase when OP-10 and AIBI is used to be emulsifier and initiator, respectively. FTIR spectrum identifies the formation of copolymers of P (MMA-co-BA). DSC confirms that the colloid is a kind of random copolymer and the consistency among the chain segment is fairly good. The emulsion polymerization conditions of preparing acrylic polymer colloid are optimized. Results show that the conversion rate is high and the coagulum is low and the particle size of the acrylic polymer colloids is small when the amount of AIBI is 0.75 g. The polymerization temperature is 70 °C, which is lower than the one that the emulsion polymerization is initiated with the persulfate.     

Toward self-assembling dendritic macromolecules from conventional monomers by a combination of living radical polymerization and irreversible terminator multifunctional initiator

TERMINI stands for irreversible terminator multifunctional initiator and represents a new concept elaborated in our laboratory for the design of novel macromolecules with complex architecture from a diversity of commercial monomers. TERMINI is a masked multifunctional initiator that quantitatively interrupts a living polymerization. After demasking, the TERMINI-derived repeat unit provides access to a quantitative reinitiation of the same living polymerization in more than one direction, thus becoming a branching point. In this article, with a combination of self-regulated metal-catalyzed living radical polymerization and TERMINI, we demonstrate a new method for the divergent synthesis of dendritic poly(methyl methacrylate) containing a bifunctional core at its focal point. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 505–513, 2004     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Ring opening polymerization of adipic anhydride initiated by dibutylmagnesium initiator

The ring opening polymerization of adipic anhydride (AA) initiated by dibutylmagnesium has been investigated in solution and in bulk. The results indicate that dibutylmagnesium is quite effective for the ring opening polymerization of AA. The polymer has been characterized by ¹H-NMR, IR and DSC. The end group analysis suggests that the AA polymerization might proceed through the “coordination-insertion” mechanism based on the acyl-oxygen cleavage of the AA ring.     

Fast copper catalyzed living radical polymerization of acrylonitrile utilizing a high concentration of radical initiator

This article first reports a fast and controlled living radical polymerization (LRP) of acrylonitrile, evidenced by 81.3% monomer conversion within 40 min and well‐defined the polymers with a narrow polydispersity index (PDI) range of 1.14?1.38. This was achieved by utilizing azobis(isobutyronitrile) as radical initiator with a high concentration up to 190 mM and CuBr₂ as catalyst with a very low concentration down to 50 ppm. The polymerization displayed typical LRP characteristics, including pseudo first‐order kinetics of polymerization, the linear increase of number‐average molecular weights (MWs), low PDI values. The influence of various experimental components, radical initiator concentration, catalyst concentration, and reaction temperature, on the polymerization reaction and MW as well as PDI has been investigated in detail. ¹H NMR and gel permeation chromatography analyses as well as chain extension reaction confirmed the very high chain‐end functionality of the resultant polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of A2B star block copolymers from a heterotrifunctional initiator

We described the obtention of A₂B star block copolymers through the use of a new heterotrifunctional initiator. That way, well‐defined (PCL)₂‐arm‐PtBuMA and (PCL)₂‐arm‐PS star block copolymers have been synthesized from a heterotrifunctional initiator bearing two hydroxyl groups able to initiate ROP of CL (with AlEt₃ or Sn(Oct)₂ as coinitiator) and a bromide function able to initiate ATRP of tBuMA or styrene. Firstly, we have proceeded using a sequential process (two‐steps), leading to an intermediate macroinitiator. Secondly, attempt to polymerize these two monomers in a simultaneous process (one‐step), that is directly from the mixture of monomers, initiator, coinitiators, and solvent, has been realized and has shown that some interferences between the two polymerizations occurred, leading to an inhibition of ATRP when Sn(Oct)₂ was used and an unexpected increase in control when AlEt₃ was used as catalyst for the ROP (obtention of well‐defined (PCL)₂‐arm‐PtBuMA with pdi of 1.18). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1796–1806, 2006     

聚四氢呋喃三元醇的合成及表征

合成了一种新的三元引发剂[C₂H₅C(CH₂OCH₂CH₂CO+ClO₄^-)₃],并用于制备聚四氢呋喃三元醇.用¹HNMR,FTIR和GPC法对聚合物的结构进行了表征.结果表明,产物中环状齐聚物的含量极低.对聚合物水解产物的分子量及分子量分布测定结果表明,产物为预期的三元醇,聚合反应过程中链转移可以忽略,聚合物的分子量可控.     

Asymmetric polymerization of N-vinylcarbazole with optically active anionic initiators

The anionic polymerization of N-vinylcarbazole(NVC) by using optically active anionic initiators such as the lithium salts of(S)-1-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-1-FIDH) and(S)-2-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-2-FIDH) and complexes of(-)-Sparteine with n-butylithium(n-Bu Li-(-)-Sp) or fluorenyl lithium(FILi-(-)-Sp) was achieved. The yield and specific rotation of poly(N-vinylcarbazole)s(poly(NVC)s) were considerably affected by the molar ratio of(S)-FIDH to NVC. The highest yield and specific rotation were obtained with Li-(S)-1-FIDH as an initiator, with a molar ratio of monomer and initiator [M]/[I] = 10/1. The effects of the chiral initiators, type of solvent and the polymerization temperature were investigated. The obtained optical activity of polymers was attributed to asymmetric induction of the chiral initiators.     

Preparation of substituted network polysilanes by a disproportionation reaction of ethoxydisilane initiated by a small amount of organolithium reagents

Network methylethoxypolysilanes containing various substituents such as phenyl, butyl, phenylene, thiophene, and anthracene groups were prepared by a disproportionation reaction of 1,1,2,2-tetraethoxy-1,2-dimethyldisilane initiated by addition of a small amount of organolithium reagents that have the corresponding substituents. The reaction was considered to be catalyzed by lithium ethoxide, which was formed by the substitution reaction of the ethoxydisilane with the lithium reagents. Both the substituted and pristine disilanes participated in the disproportionation reaction to yield the network polysilanes. The amount of the substituents and the molecular weight of the polysilanes varied, depending on what and how much of the lithium reagent were used. The electrical conductivity of some polysilanes was measured, and polymers with thiophene or anthracene groups were found to show relatively higher conductivity of 10⁻⁴ Scm⁻¹ after iodine doping. © 1997 John Wiley & Sons, Inc.     

Emulsifier-free emulsion copolymerization of styrene and acrylamide using an amphoteric initiator

Emulsifier-free emulsion copolymerization of styrene (St) and acrylamide (AAm) has been investigated in the presence of an amphoteric water-soluble initiator, 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine]hydrate (VA057). The kinetics of polymerization and the colloidal properties of the resulting latices were studied and compared with the cases using ionic initiators. When adopting the amphoteric initiator at pHs lower than 10, stable amphoteric poly (St/AAm) latices, evidenced by the electrophoretic mobility, were prepared directly. Meanwhile, almost the same conversion versus time curves appeared and there were no apparent differences in the final particle sizes for those polymerizations, whereas in the polymerization at pH 10, a much lower rate of copolymerization and a larger size of particles were observed. The surface charge density and the growth rate of latex particles produced with VA057 at pH<10 were comparable to those of the particles with a cationic initiator, 2,2′-azobis(2-amidinopropane)dihydrochloride, but were apparently lower than those with an anionic initiator, potassium persulfate, when the polymerizations were carried out under corresponding conditions. The number of initiator fragments incorporated onto the particle surfaces was independent of polymerization pH, except for pH 10. The abnormal performance of VA057 at pH 10 was attributed to its degradation due to hydrolysis. Received: 14 December 1999 Accepted: 22 February 2000     

Cationic cure of epoxy resin initiated by methylanilinium salts as a latent thermal initiator

The effect of the novel N‐crotyl‐N,N‐dimethyl‐4‐methylanilinium hexafluroantimonate (CMH) initiator on cure kinetics and rheological properties of diglycidylether of bisphenol A (DGEBA) epoxy cationic system was investigated. From DSC measurements of the DGEBA/CMH system, it was found that this system exhibited excellent thermal latent characteristics at a given temperature and revealed complex cure behavior as indicated by multiple exotherms. The conversion and conversion rate of the DGEBA/CMH system increased with increasing the concentration of initiator, attributed to the high activity of CMH. Viscoelastic properties during gel formation of DGEBA initiated by CMH were investigated by rheological techniques under isothermal conditions. The gel time obtained from the modulus crossover point t(G′) = G″ was affected by a high curing temperature and the concentration of CMH, resulting in a high degree of network formation in cationic polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2397–2406, 2001     

Steric effects in the tetracyanoethylene catalysed methanolysis of some cyclohexane epoxides

The presence of a hydroxyl group has been shown to direct the regiochemistry and stereochemistry of the TCNE methanolysis of cyclohexane hydroxy-epoxides. α-Pinene epoxide underwent cleavage to form the 8-methyl ether of trans-sobrerol.     

Miktoarm star copolymers of poly(ϵ‐caprolactone) from a novel heterofunctional initiator

A novel heterofunctional initiator, synthesized from pentaerythritol in a three step reaction sequence with two ring opening polymerization (ROP) and two atom transfer radical polymerization (ATRP) initiating sites, was used to prepare A₂B₂ miktoarm star copolymers of poly(ε‐caprolactone), PεCL, with polystyrene, PS, poly(methyl methacrylate), PMMA, poly(dimethylaminoethyl methacrylate), PDMAEMA, and poly(2‐hydroxyethyl methacrylate), PHEMA. A₂B miktoarm stars, A being PεCL or poly(δ‐valerolactone), PδVL and B PS were also prepared from ω,ω‐dihydroxy‐PS, synthesized from ω‐Br‐PS and serinol, by ROP of εCL or δVL. All polymers were characterized by size exclusion chromatography, ¹H NMR spectroscopy, and membrane osmometry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5164–5181, 2007     

Enolate anionic initiator,sodium deoxybenzoin,for leading living natures by formation of aggregators at the growth chain ends

The living anionic polymerization of n‐hexyl isocyanate (HIC) using a newly developed initiator forming metal–enolate complex, sodium deoxybenzoin (Na‐DB), is reported. For the polymerization of HIC, Na‐DB serves the dual functions of providing controlled fast initiation and efficiently protecting the living chain ends. The use of Na‐DB has resulted in quantitative polymer yields (～100%), effective control of the polymer's molecular weights, and low polydispersity index. To examine the living nature of poly(n‐hexyl isocyanate) (PHIC), block copolymerization of HIC with another isocyanate monomer, 3‐(triethoxysilyl)propyl isocyanate (TESPI), was carried out. The resulting block copolymer, poly(n‐hexyl isocyanate)‐b‐poly(3‐(triethoxysilyl)propyl isocyanate) (PHIC‐b‐PTESPI) was synthesized successfully via living anionic polymerization using Na‐DB with quantitative yield and controlled molecular weight. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013