超级电容器炭电极材料的研究

炭电极材料是超级电容器的核心,该领域的研究近年来相当活跃,活性炭粉、活性炭纤维、碳凝胶、碳纳米管、玻态炭、模板炭、碳化物衍生炭、石墨烯等各种多孔炭材料用作超级电容器电极材料的研究都有报道.本文概述了我们近年来在超级电容器炭电极材料方面的研究工作,主要介绍了强碱化学活化制备活性炭电极材料、纳米CaCO3模板法制备介孔炭电...     

超级电容器用炭/导电聚合物复合材料*

炭/导电聚合物复合材料是近年来发展起来应用于超级电容器的一种新型电极材料。炭材料与氧化物的复合材料,或者炭材料与导电聚合物的复合材料,能够将双电层电容与法拉第电容结合,既可提高超级电容器的比电容,改变其充放电电压,又可提高其循环性能。本文综述了近年来国内外各种炭材料,如活性炭,碳纳米管等与导电聚合物复合材料的研究进展,认为炭与导电聚合物的复合材料,尤其是性能优良的炭气凝胶,模板法制备的中孔炭,以及由金属或非金属碳化物与氯气等刻蚀剂反应制备的骨架炭与导电聚合物的复合材料是超级电容器电极材料研究的一个重要发展方向。     

高功率超级电容器用介孔炭电极材料

以纳米CaCO3为模板、蔗糖为前躯体制备超级电容器用介孔炭电极材料.材料的结构由氮吸附、TEM表征,借助恒流充放电、循环伏安和交流阻抗评价了其在6 mol.L-1KOH电解液中的电化学电容性能.结果表明,蔗糖基介孔炭的比表面积606 m2/g,富含10~30 nm的介孔.恒流放电法测得介孔炭在电流密度50 mA/g下的比电容为125 F/g,大电流倍率性能特别突出.电流密度增大到20 000 mA/g,比电容还保持有88F/g,远高于进口电容炭,该介孔炭是一种很有前景的高功率超级电容器炭电极材料.     

炭-/石墨烯量子点在超级电容器中的应用

炭-/石墨烯量子点作为新兴的炭纳米材料,因具有独特的小尺寸效应和丰富的边缘活性位点而在高性能超级电容器电极材料的研发方面展现出巨大潜力。针对目前炭-/石墨烯量子点在超级电容器电极材料方面的应用优势和存在的关键问题,本文以炭-/石墨烯量子点、量子点/导电炭复合材料、量子点/金属氧化物复合材料、量子点/导电聚合物复合材料以及量子点衍生炭这些电极材料为脉络,梳理了近年来该领域的发展状况,尝试阐释炭-/石墨烯量子点在电极材料、复合材料和衍生炭电极材料中所起到的关键作用,最后对炭-/石墨烯量子点电极材料的发展进行了展望。本综述以期为炭-/石墨烯量子点基电极材料的研究提供一定参考和依据。     

基于玉米秸秆合成的多孔生物质炭材料及其电化学储能

以玉米秸秆为原料,合成了高比表面积(2167 m²/g)的多孔生物质炭材料。 优化实验条件即可获得性能最佳的生物质炭电极材料,其在电流密度为1 A/g时的比电容高达390 F/g。 更重要的是,以所得最佳多孔生物质炭为电极材料,3 mol/L 的KOH溶液为电解质,组装了液相对称超级电容器。 该超级电容器在功率密度为818 W/kg时,其能量密度高达7 Wh/kg,在循环10000圈后的电容保持率为91.1%。 同时,将两个这种超级电容器串联充电之后,能够点亮15个LED灯并驱动小风扇正常工作。 这些结果表明,将基于玉米秸秆的多孔生物质炭作为先进电极材料应用于超级电容器具有较大的实际应用价值。     

新型超级电容器的研发进展

传统超级电容器受低能量密度的限制,在当今器件研发中需更加关注电极材料结构-组成-性能研究。 本文总结了新型赝电容器的发展历程及其研发过程中存在的挑战与解决措施,着重从胶体离子超级电容器电极材料等新型的电极材料和氧化还原电解质两个方面进行综述。 原位合成的胶体离子超级电容器电极材料比非原位合成的电极材料具有更高的反应活性,并且以近似离子的状态存在,有效增加了电极材料的比容量。 氧化还原电解质的使用在不改变电极材料的前提下,进一步提高了超级电容器的能量密度。 初步介绍了新型锂离子电容器。 锂离子电容器同时使用电池型材料和电容型材料,可提高其能量密度。 依据当前超级电容器的研发现状,未来有望将电池材料和电容器材料结合使用,进而形成电池电容器或电容电池,使其同时具有高的能量密度和功率密度。     

植物基多孔炭材料在超级电容器中的应用

植物基多孔炭具有发达的孔结构、大的表面积、较为成熟的制备工艺、丰富的来源、低廉的价格,是目前商业应用范围最广的超级电容器电极材料。然而在实际应用中仍然存在着质量/体积比容量较低、倍率性能差等问题。本文针对先进电容器件的高能量密度、优异功率性能的要求,首先介绍了近年来发展的植物基多孔炭的制备方法,讨论了植物前驱体的组成和结构对其产物结构的影响以及与其电化学性能之间的构效关系,特别总结了近年来植物基超大比表面积多孔炭、中孔炭、层次化多孔炭的制备方法和电容储能性能。针对大比表面积多孔炭用于超级电容器时的体积性能不佳这一关键问题,本文还总结了提高植物基多孔炭体积电化学性能的方法。最后,对植物基多孔电极材料存在的问题进行了分析与总结,并展望了其研究前景。     

以稻壳热解炭制备镧负载多孔炭复合电极材料

利用稻壳热解炭为原料制备镧负载多孔炭复合电极材料(La/PCs),先将稻壳热解炭分离出炭前驱体,再采用原位活化/负载的方法制备一系列镧负载多孔炭复合电极材料,分别考察了煅烧温度和浸渍比对其吸附性能和电化学性能的影响.采用X射线衍射(XRD)、 X射线光电子能谱(XPS)、扫描电子显微镜/X射线能谱仪(SEM-EDS)和Brunauer-Emmett-Teller比表面积(BET)法研究了该系列镧负载多孔炭复合电极材料的金属结构与价态、元素组成及表面形貌,并分析了孔结构与电容值之间可能存在的关系.结果表明,在6 mol/L KOH电解液中, La/PC＿900/10材料的电容值为269.45 F/g.在电流密度为0.5 A/g时,由其组装的对称超级电容器具有23.45 W·h/kg的能量密度,此时的功率密度为0.70 kW/kg,并且循环5000次后的电容保持率为86.41%.La/PC＿900/10良好的电容性能显示了其作为碳基电极应用于高性能超级电容器的潜力.研究结果为稻壳热解炭的利用和镧在新能源材料领域的应用提供了一条可行路径.     

离子液体辅助条件下由稻壳合成超级电容器用多孔炭（英文）

本文以稻壳为碳源,以离子液体1-丁基-3-甲基咪唑六氟磷酸盐(BMIMPF_6)为模板和辅助活化剂制备了多孔炭材料(PCs).多孔炭的比表面积达1438 m~2·g~(-1),总孔容达0.75 cm~3·g~(-1).以PCs为超级电容器电极材料,6 mol·L~(-1)的KOH溶液为电解液组装成扣式电池,在0.05 A·g~(-1)的电流密度下,比电容高达256 F·g~(-1);当电流密度增大至10A·g~(-1),其比电容仍保持在211 F·g~(-1),展现出好的倍率性能.所得的多孔炭电极均表现出优异的循环稳定性.这一工作以BMIMPF_6作为模板和辅助活化剂,为合成生物质基超级电容器用多孔炭提供了一种新方法.     

LiTFSI/2-噁唑烷酮电解液与不同微结构碳材料的电化学兼容性

二（三氟甲基磺酸酰）亚胺锂（LiTFSI）与1,3-氮氧杂环戊-2-酮（OZO）形成的离子液体具有良好的物理和电化学性能,表现出宽的液相温度范围和高的离子电导率,可满足超级电容器的应用需求。本文制备的LiTFSI-OZO离子液体体系中,各种离子的结构组成（如自由离子、离子对、积聚离子）及其之间的相互作用对离子液体的电化学性能具有较大的影响,将其作为电解液应用于不同微结构特性（孔径、比表面积等）的炭材料（碳纳米管(CNTs)、中孔活性炭(MEACs)和微孔活性炭(MIACs)）作为电极的电化学双层电容器中,电化学兼容性研究表明,由于中孔活性炭电极材料有最大的比表面积及最适宜的孔径分布,相应的模拟电容具有最高的比容量184.6 F?g-1。该研究表明,对电极材料的微结构特性与离子液体离子尺度进行优化匹配是实现离子液体作为电解液应用于超级电容器的关键。     

电化学双电层电容器用新型炭材料及其应用前景

活性炭是目前使用最为广泛的一种电化学双电层电容器（EDLC）的电极材料,但其固有的缺点制约了EDLC性能的进一步提高。用新型高性能炭电极材料可使EDLC比能量和比功率性能进一步提高。这些新型炭材料包括基于石墨层状结构的纳米门炭,基于碳纳米管阵列结构的毛皮炭,通过高温置换反应制备的骨架炭以及电极可整体成型的纳米孔玻态炭。本文介绍了这些炭材料的电化学特性及其在电化学双电层电容器中的应用,指出用这4种新型炭材料制备EDLC的比能量或比功率性能远高于目前活性炭基EDLC,具有良好的应用前景。     

Ordered mesoporous silicon carbide-derived carbon for high-power supercapacitors

Micro/mesoporous carbon was prepared by chlorination of ordered mesoporous silicon carbide derived from magnesio-thermal reduction of templated carbon-silica precursors. These materials were then used as active materials for electrochemical capacitors and characterized in 1.5 M NEt₄BF₄/AN. The electrodes showed outstanding rate capability (90% of capacity retention at 1 V/s and time constant of 1 s) with high specific areal capacitance (0.5 F/cm² of electrode), that makes such hierarchical porous carbons promising for high power and energy density supercapacitors.     

The electrochemistry of activated carbonaceous materials: past, present, and future

Carbonaceous materials are widely used in electrochemistry. All allotropic forms of carbons??graphite, glassy carbon, amorphous carbon, fullerenes, nanotubes, and doped diamond??are used as important electrode materials in all fields of modern electrochemistry. Examples include graphite and amorphous carbons as anode materials in high-energy density rechargeable Li batteries, porous carbon electrodes in sensors and fuel cells, nano-amorphous carbon as a conducting agent in many kinds of composite electrodes (e.g., cathodes based on intercalation inorganic host materials for batteries), glassy carbon and doped diamond as stable robust and high stability electrode materials for all aspects of basic electrochemical studies, and more. Amorphous carbons can be activated to form very high specific surface area (yet stable) electrode materials which can be used for electrostatic energy storage and conversion [electrical double-layer capacitors (EDLC)] and separation techniques based on electro-adsorption, such as water desalination by capacitive de-ionization (CDI). Apart from the many practical aspects of activated carbon electrodes, there are many highly interesting and important basic aspects related to their study, including transport phenomena, molecular sieving behavior, correlation between electrochemical behavior and surface chemistry, and more. In this article, we review several important aspects related to these electrode materials, in a time perspective (past, present, and future), with the emphasis on their importance to EDLC devices and CDI processes.     

Electrical double-layer capacitor performance of nitrogen-doped ordered mesoporous carbon prepared by nanotemplating method

In this work, the electrical double-layer capacitive properties of nitrogen-doped ordered mesoporous carbons (N-OMCs) were investigated. Ordered mesoporous carbons (OMCs) with 3D body-centered Ia3d structure has been prepared by KIT-6 mesoporous silica as a hard template with aniline for N-OMC and sucrose for Su-OMC as a carbon precursor. Using the different carbon precursor, moderate amounts of nitrogen atoms could be doped to the OMC structures. The obtained materials were characterized by powder X-ray diffraction (XRD), nitrogen adsorption isotherms at 77 K, elemental analysis, and X-ray photoelectron spectroscopy (XPS). Prepared OMCs had mesopore properties such as a high surface area with narrow pore-size distribution. From cyclic voltammograms (CVs) test, N-OMC compared to Su-OMC exhibit higher capacitance and fast charge/discharge characteristics, which results from their pseudo-capacitive effect of incorporated nitrogen atoms. It was thought that N-OMC prepared by the nanotemplating method with KIT-6 and aniline were suitable electrode materials for electrical double-layer capacitors.     

Mesoporous carbon capsules as electrode materials in electrochemical double layer capacitors

The performance of mesoporous carbon capsules as electrode materials in electrochemical double layer capacitors (EDLCs) was evaluated in the presence of a variety of electrolytes, including room temperature ionic liquids (ILs).     

A novel polyaniline/mesoporous carbon nano-composite electrode for asymmetric supercapacitor

<正>A novel nano-composite of polyaniline/mesoporous carbon(PANI/CMK-3) was prepared with mesoporous carbon(CMK-3) serving as the support.Electrochemical asymmetric capacitors have been successfully designed by using PANI/CMK-3 composite and CMK-3 as positive and negative electrode,respectively.The results showed that the discharge capacity of the asymmetric capacitor could reach 87.4 F/g under the current density of 5 mA/cm~2 and cell voltage of 1.4 V.The energy density of the asymmetric capacitor was up to 23.8 Wh/kg with a power density of 206 W/kg.Furthermore,PANI/CMK-3-CMK-3 asymmetric capacitor using this PANI/CMK-3 nano-composite could be activated quickly and possess high charge-discharge efficiency.     

Synthesis of spherical mesoporous carbon for electric double-layer capacitors

Resorcinol and formaldehyde were used as carbon precursors, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer was employed as a soft template, and tetraethylorthosilicate-generated silica was used as hard templates to synthesize spherical mesoporous carbon. The resulting spherical mesoporous carbons were characterized by nitrogen adsorption–desorption isotherms and electron microscopy (SEM and TEM) and used as electrode materials for aqueous electric double-layer capacitors. The average diameters of spherical particles ranged from 2 to 7 μm and the mesopore was ca 2 nm. The highest specific surface area of 1,000 m²/g and mesopore volume of 0.86 cm³/g was obtained. The specific capacitance of 130 F/g was obtained by means of galvanostatic charging/discharging and cycle voltammetry.     

功率型锂/氟化碳一次电池的优化设计研究进展

锂/氟化碳电池作为固态正极中理论比能量较高（2203 Wh/kg）的一种一次电池体系,受到极大的关注,在诸多领域已有应用。本文对高功率锂/氟化碳电池的优化设计的最新研究进展进行了综述,详细讨论了氟化碳材料的前驱体、氟化方法、氟化碳材料表面改性、电极结构设计等因素对电池倍率性能的影响,并对今后功率型锂/氟化碳一次电池的发展方向进行了展望。     

有序中孔炭的电化学储氢性能

将蔗糖、聚环氧乙烯-聚环氧丙烯-聚环氧乙烯三嵌段共聚物和硅源构成的复合物进行预炭化、炭化和除硅处理合成出有序中孔炭, 采用XRD、TEM、HRTEM和N2吸脱附等手段对其进行表征, 并将有序中孔炭制成电极开展恒流充放电储氢性能研究. 结果显示, 具有较高比表面积(720 m2·g-1)和孔容(0.86 cm3·g-1)的有序中孔炭材料的电化学储氢容量为70.1 mAh·g-1, 高于具有相对较低比表面积(610 m2·g-1)和孔容(0.66 cm3·g-1)的有序中孔炭储氢容量(64.1 mAh·g-1). 通过与单壁碳纳米管电极(25.9 mAh·g-1)的对比, 表明有序中孔炭具有良好的电化学储氢性能和更高的电化学活性.     

Carbon materials for supercapacitor application

The most commonly used electrode materials for electrochemical capacitors are activated carbons, because they are commercially available and cheap, and they can be produced with large specific surface area. However, only the electrochemically available surface area is useful for charging the electrical double layer (EDL). The EDL formation is especially efficient in carbon pores of size below 1 nm because of the lack of space charge and a good attraction of ions along the pore walls. The pore size should ideally match the size of the ions. However, for good dynamic charge propagation, some small mesopores are useful. An asymmetric configuration, where the positive and negative electrodes are constructed from different materials, e.g., activated carbon, transition metal oxide or conducting polymer, is of great interest because of an important extension of the operating voltage. In such a case, the energy as well as power is greatly increased. It appears that nanotubes are a perfect conducting additive and/or support for materials with pseudocapacitance properties, e.g. MnO(2), conducting polymers. Substitutional heteroatoms in the carbon network (nitrogen, oxygen) are a promising way to enhance the capacitance. Carbons obtained by one-step pyrolysis of organic precursors rich in heteroatoms (nitrogen and/or oxygen) are very interesting, because they are denser than activated carbons. The application of a novel type of electrolyte with a broad voltage window (ionic liquids) is considered, but the stability of this new generation of electrolyte during long term cycling of capacitors is not yet confirmed.