Preparation of polyaryl esters by a new direct polycondensation reaction with arylsulfonyl chlorides in pyridine

Arylsulfonyl chlorides were successfully used as a new condensing agent for the synthesis of polyaryl esters by the direct polycondensation of aromatic dicarboxylic acids and bisphenols. High-molecular-weight polymers (M_w = 84,000) were prepared by reacting dicarboxylic acids with the sulfonyl chlorides in pyridine in the presence of LiCI, followed by treating with a pyridine solution of bisphenols. The polycondensation was significantly affected by factors, such as, the kind of arylsulfonyl chlorides, its amount, the conditions of initial reaction of the acids with the sulfonyl chlorides, the amounts of LiCI added, and dropwise addition of bisphenols.     

Synthesis and properties of poly(arylene ether imide ketone)s

Poly(arylene ether ketone)s containing imide units were prepared by the aromatic nucleophilic displacement reaction of the potassium salts of bisphenols with bis(4-fluorobenzoyl)phthalimides in N-methyl-2-pyrrolidone at elevated temperature. The polymers having inherent viscosities of 0.34–0.77 dL/g were obtained in 2 h. The polymers exhibited glass transition temperatures ranging from 216 to 268°C and decomposition temperatures (5% weight loss under air atmosphere) ranging from 450–570°C mainly depending on the bisphenols used in the polymer synthesis. The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether ketone imide)s belong to a superior class of heat resistant polymers. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

Synthesis and Properties of Phosphorus-Containing Aromatic Polyethers

The phosphorus-containing aromatic polyethers were prepared from bis(p-chlorophenyl)phenylphosphine oxide (BCPO) with the sodium salt of several bisphenols by high temperature solution polycondensation. The best result (yield 84%, n _sp /c = 0.15) was obtained from BCPO with bisphenol A (BPA) in dimethyl sulfoxide. However, the polymerization in the solvents such as N, N′-dimethyl-2-pyrrolidone, hexamethylphosphoramide, and N,N′-dimethylformamide, and the polymerization with the other bisphenols HO-C₆H₄-X-C₆H₄?OH, where X = CO, S0₂, CH₃P(O), C₆H₅P(O) in place of BPA gave gumlike polymers. The polymer prepared from BCPO and BPA did not decompose up to ca. 300°C under air or nitrogen atmosphere, but it decomposed slowly at 300–520°C, and decomposed rapidly at 520–540°C. The activation energy (δE) for the maximum rate of weight loss was 47.8 kcal/mole.     

Reactions with samarium diiodide in polymer synthesis

Reactions induced by Sml₂, such as reduction, coupling and cyclization are occurring in high yield upon mild conditions. It is due to the high redox potential of divalent samarium. Now reactions with Sml₂ are used in the polymer synthesis as well. By the coupling reaction of various diacid chlorides poly-α-diketones having molecular weight up to 20000 have been obtained at room temperature in quantitative yield. Isomeric difluorobenzils prepared by the one-step reaction of Sml₂ and relevant fluorobenzoyl chlorides have been used in the nucleophylic substitution reaction with bisphenols. Film-forming high molecular weight copolyetherketone-α-diketones have been synthesized when such difluorobenzils have been used as the comonomers in the polycondensation of 4,4'-difluorobenzophenone and bisphenols. All these polymers bearing α-diketogroups have been transformed into linear and network polyquinoxalines by their reaction with aromatic (bis)o-diamines. Aromatic polypinacols have been synthesized by the reaction of dialdehydes and Sml₂ in THF under mild conditions. The availability of the reactive α-hydroxy groups made it possible to carry out polymer chain reactions. It was stated that the imide cycle is reduced by Sml₂ at room temperature. The treatment of polyimides by Sml₂ leads to the change of polymer properties, mainly heat resistance and solubility. The possibility of formation of Si-Si bonds by reductive coupling of organochlorosilanes with the use of Sml₂ instead of Na has been shown. It was found that the reaction of diorganodichlorosilanes with Sml₂ easily proceeds in THF solution at room temperature to yield α,ω-dichloro-oligosilanes.     

Direct polycondensation of aromatic dicarboxylic acids and bisphenols with tosyl chloride and N,N-dimethylformamide in pyridine

A Vilsmeier adduct derived from arylsulfonyl chlorides and DMF in pyridine was successfully used as a new condensating agent for the synthesis of aromatic polyesters by the direct polycondensation of aromatic dicarboxylic acids and bisphenols and also of hydroxybenzoic acids. Polymers of high molecular weights (M?_w = 78,000) with relatively narrow molecular weight distribution (M?_w/M?_n ≈ 3.0) were prepared by reacting aromatic dicarboxylic acids with the adduct in pyridine, followed by addition of bisphenols. The polycondensation was significantly affected by the amount of DMF, the nature of the arylsulfonyl chlorides, the conditions of initial reaction of the acids with the adduct, and the rate of reaction with bisphenols. The process was adaptable to the direct polycondensation of hydroxybenzoic acids, affording polymers of high molecular weight (η_inh = 1.73).     

Phenoxasilin-containing polyamides and polyesters

Silicon-containing polyamides and polyesters of a new type have been synthesized. They contain phenoxasilin rings with double-stranded structure. The polymers were synthesized by the interfacial polycondensation of 2,8-dichloroformyl-10,10-diphenylphenoxasilin with diamines and bisphenols, and were obtained in nearly quantitative yields. Their reduced viscosities were in the range of 0.53–1.47 dl g^?1 m dimethylformamide (DMF), m-cresol or chloroform. Some of the polyamides were soluble in polar aprotic solvents such as DMF and N-methyl-2-pyrrolidone (NMP) and the polyesters had good solubility in chloroform, phenol-sym tetrachloroethane (60:40 by wt %) and acidic solvents (m-cresol and nitrobenzene). The polymers hardly dissolved in cone. H₂SO₄ and some of them coloured in it. Only the polyester having sulphide bonds was soluble in benzene in addition to the above organic solvents. These polymers hardly degraded below 400° except for the polyamides derived from aliphatic diamines. The polymers from aliphatic diamines melted at 290–325°; the other polyamides and the polyesters decomposed without melting.     

超高效液相色谱-串联质谱法同时测定塑料包装矿泉水中11种双酚类化合物

建立了同时测定塑料包装矿泉水中11种双酚类化合物的超高效液相色谱-串联质谱（UPLC-MS/MS）分析方法。以真空冷冻干燥的方法对样品进行前处理。使用Waters ACQUITY UPLC BEH C₁₈色谱柱（100 mm×2.1 mm,1.7 μm）进行分离,以甲醇和0.1%（v/v）氨水为流动相对目标物进行梯度洗脱。在电喷雾负离子模式及多反应监测（MRM）模式下进行定性和定量分析。结果表明,11种双酚类化合物在线性范围内线性关系良好,线性相关系数（R²）均大于0.997;目标物的检出限为0.01~1.00 μg/L;3个加标水平下的回收率为75.3%~102.1%,相对标准偏差为1.5%~8.9%。本方法准确、简便、快速,可用于塑料包装矿泉水中双酚类化合物的实际检测。     

Preparation of crystalline and solvent resistant polycarbonates via ring-opening polymerization of cyclic oligomers

A route to solvent-resistant polycarbonates which may also be crystalline has been achieved through the intermediacy of cyclic oligomeric carbonates. Mixed oligomeric cyclics of a variety of bisphenols were prepared via the carefully controlled hydrolysis-condensation of their bischloroformates. Following ring-opening polymerization, the polymers were evaluated for potential solvent resistance. Copolymers of hydroquinone and bisphenol A containing ratios of hydroquinone to BPA between 50/50 and 70/30 were found to be insoluble in CH₂Cl₂, tetrahydrofuran, and CHCl₃, as well as other organic solvents. Polymers containing ratios of hydroquinone/BPA greater than 60/40 show a crystalline melting point by DSC at about 310°C and a glass transition temperature at 154°C.     

Fluorinated poly(ether sulfone)s

New fluorinated poly(ether sulfone)s were prepared from bisphenols and α,ωbis(4-fluorophenylsulfonyl)perfluoroalkanes. The fluorinated sulfone monomers were synthesized by reaction of 4-fluorobenzenethiol salts with perfluoroalkylene diiodides, followed by oxidation. Sodium carbonate mediated polymerization gave high molecular weight polymers in excellent yield. The polymers are generally soluble in chlorinated hydrocarbons and some dipolar solvents, are amorphous with T_g's in the range of 120–160°C and are stable to 400°C. They form clear, colorless films by solution casting. Cast films have dielectric constants and dissipation factors somewhat below those of typical poly(ether sulfone)s, and show good permeability and selectivity for O₂/N₂ gas separations.     

Synthesis of poly(arylene ether ketones) with terminal phenolic groups

Poly(arylene ether ketones) with preset molecular weights (reduced viscosity from 0. 2 to 0.82 dL g^–1) containing terminal phenolic groups were synthesized by the reactions of 4,4-difluorobenzophenone with bisphenol A or phenolphthalein in the presence of K₂CO₃ in N,N-dimethylacetamide. The influence of an excess of bisphenols on the molecular weights of the polymers obtained was studied. The structures of the polymers were confirmed by ¹H NMR spectroscopy. The molecular weight distributions of the polymers were determined.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1958–1961, September, 2004.     

Effect of gamma radiation on fluoropolymers

A series of fluoropolymer films were synthesized by reacting several bisphenol monomers with 1,3‐bis(1,1,1,3,3,3‐hexafluoro‐2‐pentafluorophenyl methoxy‐2‐propyl)benzene via a nucleophilic aromatic substitution to form polyethers. The bisphenols used included two diphenol‐substituted spirodilactams (SDL; aliphatic and aromatic), biphenol, bisphenol A, bisphenol AF, bisphenol O, and bisphenol F to form seven different polymers. Polymers were irradiated by a Gamma beam 651‐PT at a dose rate of 10.5 kGy/h; the absorbed dose in each film was varied between 300 and 1000 kGy. The effect on the chemical structure upon radiation was studied by DSC, TGA, FTIR‐ATR, and NMR after and before irradiation. Thermal analysis showed a lessened thermal stability and a lower T_g after irradiation. Further, irradiation caused a decrease in molecular weight as a result of cleavage of sp³ bonds. These data allowed calculation of the radiochemical yield scission (G_s) for each of these polymers. The SDL aromatic system proved the most radiation‐resistant. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1617–1626, 2009     

RING OPENING COPOLYMERIZATION OF SUCCINIC ANHYDRIDE-ETHYLENE OXIDE BY Al(Ⅲ) ORGANOMETALLIC CATALYSTS

Ring opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO)was successfully carried out by using a series of aluminum-based catalyst in 1,4-dioxane at62±2℃. The results showed that in-situ AlR_3-H_2O (R=ethyl, iso-butyl) catalysts gavehigher molecular weight (M_w～10~4), while Al(OR)_3 catalysts gave the higher alternatingcopolymer structure with slightly lower molecular weight. The in-situ AlR_3-H_2O systemshave been evaluated in more detail for the reaction which showed the optimum H_2O/Almolar ratio to be 0.5. The copolymers with different composition (F_(SA)/F_(EO)= 36/64to 45/55 mol/mol) were synthesized by using different monomer feed ratio. The melt-ing point (T_m), glass transition temperature (T_g) and enthalpy of fusion (ΔH_f) of thesecopolymers are depended on the copolymer composition and in the range of 87～102℃,-12～-18℃, and 37～66J/g, respectively. The second heating scan of DSC also in-dicated that the higher alternating copolymer was more easily recrystallized. The onsetdecomposition temperature was more than 300℃ under nitrogen and influenced by thecopolymer composition.     

Synthesis and characterization of new cardo polyesters

New phthalide-containing bisphenols, phenolphthalein-N-(3-methylanilide) (3-PMA), and phenolphthalein-N-(4-methylanilide) (4-PMA), were synthesized from phenolphthalein and m- and p-toluidines. These bisphenols were polycondensed with terephthaloyl chloride (TPC) using an interfacial or solution polymerization technique to yield new polyesters. Copolymers were also obtained by utilizing different molar proportion of phenolphthalein (PPH) and 3-PMA or 4-PMA with TPC. The polymers prepared by solution polymerization were obtained in 93–99% yields and showed reduced viscosities in the range 0.37–0.83 dL/g. They were readily soluble in chlorinated hydrocarbons and aprotic polar solvents. The polyesters showed glass transition temperatures in the range 261–300°C as measured by DSC. Thermogravimetric analysis of the polyesters indicated no weight loss below 408°C under N₂ atmosphere. Structure–property correlations among these cardo polyesters have been discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3227–3234, 1997     

流变相法合成LiNi0.85Co0.15O2的结构与电化学性能

以一种新型的软化学方法——流变相法, 成功地合成了锂离子电池正极材料LiNi_0.85Co_0.15O₂. 将在600～850 ℃氧气氛下处理6 h后得到的LiNi_1－yCo_yO₂ (y＝0.10, 0.15, 0.20, 0.25), 进行X射线粉末衍射(XRD)与电化学测试. 测试结果表明, 流变相前体经过800 ℃烧结后合成的LiNi_0.85Co_0.15O₂晶胞参数a＝0.2866 nm, c＝1.4193 nm及晶胞体积V＝0.1010 nm³, 以0.1 C倍率在3.0～4.3 V (vs. Li^＋/Li)放电时, 首次放电容量可以达到198.2 mAh/g, 20次循环后, 其放电容量仍在174 mAh/g以上.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.     

Synthesis and properties of various poly(diarylacetylenes) containing siloxy and hydroxy groups

Diarylacetylene monomers ( 1b ? f) containing siloxy and either naphthyl, fluorenyl, or biphenyl groups were polymerized with TaCl₅–n‐Bu₄Sn catalyst, and 1b , 1c , and 1f provided high molecular weight polymers. Free‐standing membranes of polymers 2b , 2c , and 2f were fabricated by casting from toluene solution. Desilylation of these polymer membranes was carried out with trifluoroacetic acid to afford poly (diarylacetylenes) membranes having hydroxy groups ( 3b and 3c ). According to thermogravimetric analysis (TGA), both siloxy‐containing and hydroxy‐containing polymers exhibited high thermal stability, and the onset temperatures of weight loss in air were ～370 °C and ～430 °C, respectively. The CO₂ permeability coefficients of these membranes were in the range of 65–640 barrers. The points of 3b and 3c in the PCO₂ versus PCO₂/PCH₄ plot were located above Robeson's upper bound. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4487–4495, 2007     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 2. Poly(n‐alkyl methacrylates)

Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, facilitating their use in the molecular depth profiling of these polymers by secondary ion mass spectrometry (SIMS). This study is the second in a series of systematic characterizations of the effect of polymer chemistry on degradation under polyatomic primary ion bombardment. In this study, time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～90 nm thick spin‐cast poly(methyl methacrylate), poly(n‐butyl methacrylate), poly(n‐octyl methacrylate) and poly(n‐dodecyl methacrylate) films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. The degradation of the poly(n‐alkyl methacrylates) were compared to determine the effect of the length of the alkyl pendant group on their degradation under SF₅⁺ bombardment. The sputter rate and stability of the characteristic secondary ion intensities of these polymers decreased linearly with alkyl pendant group length, suggesting that lengthening the n‐alkyl pendant group resulted in increased loss of the alkyl pendant groups and intra‐ or intermolecular cross‐linking under SF₅⁺ bombardment. These results are partially at variance with the literature on the thermal degradation of these polymers, which suggested that these polymers degrade primarily via depolymerization with minimal intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.     

SYNTHESIS AND PROPERTIES OF POLY-1,3,5-TRIAZINES

Two new polytriazines: poly[2-methyl-4, 6-(4,′4″-diphenylene)-1, 3, 5-triazine] (Ⅰ) and poly[2-phenyl-4, 6-(4′, 4″-diphenylene)-1, 3, 5-triazine] (Ⅱ) were synthesized from the solution condensation of biphenyl-4, 4′-diamidine dihydrochloride with acetic anhydride and biphenyl-4, 4′-diamidine with benzaldehyde respectively. These two polymers were characterized by TGA, DTA, elemental analysis and IR spectroscopy. They exhibited good thermal oxidative stability as shown by the fact that the powders of these polymers suffered 5.4%, 2.4% weight loss after isothermal aging in air at 300℃for 200 hours. The decomposition temperature of (Ⅱ) was 583℃in air and 590℃in N_2. These linear poly-1, 3, 5-triazines were soluble in concentrated sulfuric acid, phosphoric acid and trifluoroacetic acid whereas the erosslinked poly-1, 3, 5-triazines reported in the literature were insoluble and infusible.It is interesting that these polymers can form complexes with metal halides as determined by X-ray photoelectron spectroscopy (XPS). The polymer metal complex (Ⅲ). PdCl_2 possesses catalytic activity for hydrogenation.     

Synthesis and characterization of poly(arylene ether imidazole)s

Poly(arylene ether imidazole)s were prepared by the aromatic nucleophilic displacement reaction of a bisphenol imidazole with activated aromatic dihalides. The polymers had glass transition temperatures ranging from 230 to 318°C and number-average molecular weights as high as 82,000 g/mol. Thermogravimetric analysis showed a 5% weight loss occurring ～ 400°C in air and ～ 500°C in nitrogen. Typical neat resin mechanical properties obtained at room temperature included tensile strength and tensile modulus of 14.2 and 407 ksi and fracture energy (G_lc) of 23 in. lb/in.² Titanium-to-titanium tensile shear strengths measured at 23 and 200°C were 4800 and 3000 psi, respectively. In addition, preliminary data were obtained on carbon fiber laminates. The chemistry, physical, and mechanical properties of these polymers are discussed.