Electronic properties of orthorhombic LiGaS<Subscript>2</Subscript> and LiGaSe<Subscript>2</Subscript>

We report theoretical calculations of the band structure and density of states for orthorhombic LiGaS₂ (LGS) and LiGaSe₂ (LGSe). These calculations are based on the full potential linear augmented plane wave (FP-LAPW) method within a framework of density functional theory. Our calculations show that these crystals have similar band structures. The valence band maximum (VBM) and the conduction band minimum (CBM) are located at Γ, resulting in a direct energy band gap. The VBM is dominated by S/Se-p and Li-p states, while the CBM is dominated by Ga-s, S/Se-p and small contributions of Li-p and Ga-p. From the partial density of states we find that Li-p hybridizes with Li-s below the Fermi energy (E _F), while Li-s/p hybridizes with Ga-p below and above E _F. Also, we note that S/Se-p hybridizes with Ga-s below and above E _F.     

Mott Transition in GdMnO<Subscript>3</Subscript>: an Ab Initio Study

Orthorhombic GdMnO₃ is studied using density functional theory considering the pseudo-potential plane-wave method within local-spin-density approximation, LSDA. The electronic band structure and density of states, for several hydrostatic pressures, are studied. The Mott transition was observed at 60 GPa. Calculated lattice parameters are close to the experimental measurements, and some indirect band gaps (S→Γ) were obtained within the LSDA level of calculation, between the occupied O-2p and unoccupied Gd-4f states. The variation of the gap reduces with increasing pressure, being well fitted to a quadratic function.     

Surface effects on the magnetic properties of Co2FeAl(0 0 1): An ab initio study

Electronic structures of the Co₂FeAl(0 0 1) surface are studied theoretically via first-principles calculations based on density functional theory. It is found that the minority spin band gap at the Fermi level in bulk Co₂FeAl disappears at the surface due to space localization of the states. However, beneath the surface, the density of states of individual atoms shows a trend of minority spin gap opening at the Fermi level, which indicates that the electronic structures become close to that of bulk Co₂FeAl. The termination of FeAl is more favorable for spin polarization of Co₂FeAl films than that of Co. Accordingly, we present a composite tri-layer model to illustrate the fading of the half-metallic property in Co₂FeAl films against the ideal character in bulk materials.     

Half-metallic magnetism of Co2CrX (X=As, Sb) Heusler compounds: An ab initio study

In this study, we present the electronic, magnetic, and structural properties of two novel half-metallic full-Heusler compounds, Co₂CrAs and Co₂CrSb, in cubic L2₁ geometry. The calculations are based on the density functional theory within plane-wave pseudopotential method and spin-polarized generalized gradient approximation of the exchange-correlation functional. The electronic band structures and density of states of the systems indicate half-metallic behavior with vanishing electronic density of states of minority spins at Fermi level, which yields perfect spin polarization. The calculated magnetic moments of both systems in L2₁ structure are 5.00 μ_B, which are largely localized on the chromium site. The energy gaps in minority spin states are restricted by the 3d-states of cobalt atoms on two different sublattices. The formation enthalpies for both structures are negative indicating stability of these systems against decomposition into stable solid compounds.     

Electronic structure,topological phase transitions and superconductivity in (K,Cs)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>2</Subscript>Se<Subscript>2</Subscript>

We present LDA band structure of novel hole doped high temperature superconductors (T _c ∼ 30 K) K _x Fe₂Se₂ and Cs _x Fe₂Se₂ and compare it with previously studied electronic structure of isostructural FeAs superconductor BaFe₂As₂ (Ba122). We show that stoichiometric KFe₂Se₂ and CsFe₂Se₂ have rather different Fermi surfaces as compared with Ba122. However at about 60% of hole doping Fermi surfaces of novel materials closely resemble those of Ba122. In between these dopings we observe a number of topological Fermi surface transitions near the Γ point in the Brillouin zone. Superconducting transition temperature T _c of new systems is apparently governed by the value of the total density of states (DOS) at the Fermi level.     

Effect of hydrostatic compression on the indium-impurity-induced superconducting transition in Pb<Subscript>0.3</Subscript>Sn<Subscript>0.7</Subscript>Te

This paper reports on a study of the low-temperature conductivity and parameters of the superconducting state, namely, the critical temperature T _c and the second critical magnetic field H_c2, in the (Pb_0.3Sn_0.7)_0.95In_0.05Te solid solution under hydrostatic pressure P ≤ 9 kbar at T = 4.2 K. The choice of this material has been motivated by the fact that, according to earlier observations, it undergoes a superconducting transition at T _c ∼ 2.3 K, i.e., close to the maximum value T _c ∼ 2.9 K found for the (Pb _z Sn_{1 − z} )_0.95In_0.05Te solid solutions with a lead content z ∼ 0.15–0.25. It has been demonstrated that an increase in the pressure to P ≤ 9 kbar leads to a bell-shaped dependence T _c (P). The observed dependences are assigned to the effect of hydrostatic compression on the band structure of the solid solution and indicate a shift in the position of the Fermi level E _F with increasing pressure within the impurity band of the In quasi-local states. In this case, E _F passes through a maximum in the density of impurity states at P = 3–5 kbar.     

Electronic and magnetic structure of a possible iron based superconductor BaFe<Subscript>2</Subscript>Se<Subscript>3</Subscript>

We present results of LDA calculations (band structure, densities of states, Fermi surfaces) for possible iron based superconductor BaFe₂Se₃ (Ba123) in normal (paramagnetic) phase. Results are briefly compared with similar data on prototype BaFe₂As₂ and (K,Cs)Fe₂Se₂ superconductors. Without doping this system is anti-ferromagnetic with T _N^exp ∼ 250 K and rather complicated magnetic structure. Neutron diffraction experiments indicated the possibility of two possible spin structures (antiferromagnetically ordered “plaquettes” or “zigzags”), indistinguishable by neutron scattering. Using LSDA calculated exchange parameters we estimate Neel temperatures for both spin structures within the molecular field approximation and show τ₁ (plaquettes) spin configuration to be more favorable than τ₂ (zigzags).     

Specific features of the electronic structure of the CeCu<Subscript>6</Subscript>, CePd<Subscript>3</Subscript>, CeSi<Subscript>2</Subscript>, and CeF<Subscript>3</Subscript> systems

The electronic structure of cerium systems, the hybridization of 4 f and outer-shell electrons, and the influence of the position of the localized 4 f level with respect to the Fermi level E _F in the conduction band have been investigated. The CeCu₆, CePd₃, CeSi₂, and CeF₃ systems have been studied using X-ray photoelectron spectroscopy. The densities of states have been calculated by the tight-binding linearized muffin-tin orbital method within the atomic sphere approximation, which takes into account the covalent character of bonds and the nonspherical distribution of the electron density. The results obtained from the calculations of the total density of states are in good agreement with the valence band X-ray photoelectron data for the systems under investigation. It has been shown that the differences in the properties of the cerium systems are determined by the specific features of their electronic structure. A strong interatomic interaction is characteristic of heavy-fermion systems.     

Pressure induced phase transformations and band structure of different high pressure phases in tellurium

We report here high-pressure x-ray diffraction (XRD) studies on tellurium (Te) at room temperature up to 40 GPa in the diamond anvil cell (DAC). The XRD measurements clearly indicate a sequence of pressure-induced phase transitions with increasing pressure. The data obtained in the pressure range 1 bar to 40 GPa fit five different crystalline phases out of Te: hexagonal Te (I) → monoclinic Te(II) → orthorhombic Te (III) → Β-Po-type Te(IV) → body-centered-cubic Te(V) at 4, 6.2, 11 and 27 GPa, respectively. The volume changes across these transitions are 10%, 1.5%, 0.3% and 0.5%, respectively. Self consistent electronic band structure calculations both for ambient and high pressure phases have been carried out using the tight binding linear muffin tin orbital (TB-LMTO) method within the atomic-sphere approximation (ASA). Reported here apart from the energy band calculations are the density of states (DOS), Fermi energy (E _f) at various high-pressure phases. Our calculations show that the ambient pressure hexagonal phase has a band gap of 0.42 eV whereas high-pressure phases are found to be metallic. We also found that the pressure induced semiconducting to metallic transition occurs at about 4 GPa which corresponds to the hexagonal phase to monoclinic phase transition. Equation of state and bulk modulus of different high-pressure phases have also been discussed.     

Specific features of the electronic,spin, and atomic structures of a topological insulator Bi<Subscript>2</Subscript>Te<Subscript>2.4</Subscript>Se<Subscript>0.6</Subscript>

The specific features of the electronic and spin structures of a triple topological insulator Bi₂Te_2.4Se_0.6, which is characterized by high-efficiency thermoelectric properties, have been studied with the use of angular- and spin-resolved photoelectron spectroscopy and compared with theoretical calculations in the framework of the density functional theory. It has been shown that the Fermi level for Bi₂Te_2.4Se_0.6 falls outside the band gap and traverses the topological surface state (the Dirac cone). Theoretical calculations of the electronic structure of the surface have demonstrated that the character of distribution of Se atoms on the Te–Se sublattice practically does not influence the dispersion of the surface topological electronic state. The spin structure of this state is characterized by helical spin polarization. Analysis of the Bi₂Te_2.4Se_0.6 surface by scanning tunnel microscopy has revealed atomic smoothness of the surface of a sample cleaved in an ultrahigh vacuum, with a lattice constant of ~4.23 Å. Stability of the Dirac cone of the Bi₂Te_2.4Se_0.6 compound to deposition of a Pt monolayer on the surface is shown.     

Frustrated exchange interactions formation at low temperatures and high hydrostatic pressures in La<Subscript>0.70</Subscript>Sr<Subscript>0.30</Subscript>Mn<Subscript>O2.85</Subscript>

The magnetic and thermal properties of the anion-deficient La_0.70Sr_0.30MnO_2.85 manganite are investigated in wide temperature (4–350 K) range, including under hydrostatic pressure (0–1.1 GPa). Throughout the pressure range investigated, the sample is spin glass with diffused phase transition into paramagnetic state. It is established, that spin glass state is a consequence of exchange interaction frustration of the ferromagnetic clusters embeded into antiferromagnetic clusters. The magnetic moment freezing temperature T _f of ferromagnetic clusters increases under pressure, freezing temperature dependence on pressure is characterized by derivative value ∼4.5 K/GPa, while the magnetic ordering T _MO temperature dependence is characterized by derivative value ∼13 K/GPa. The volume fraction of sample having ferromagnetic state is V _fer ∼ 13% and it increases under a pressure of 1.1 GPa by ΔV _fer ≈ 6%. Intensification of ferromagnetic properties of the anion-deficient La_0.70Sr_0.30MnO_2.85 manganite under hydrostatic pressure is a consequence of oxygen vacancies redistribution and unit cell parameters decrease. The most likely mechanism of frustrated exchange interactions formation is discussed.     

Pseudogap behavior in Bi<Subscript>2</Subscript>Ca<Subscript>2</Subscript>SrCu<Subscript>2</Subscript>O<Subscript>8</Subscript>: Results of the generalized dynamical mean-field approach

Pseudogap phenomena are observed for the normal underdoped phase of different high-T _c cuprates. Among others, the Bi₂Sr₂CaCu₂O_{8 − δ} (Bi2212) compound is one of the most studied experimentally. To describe the pseudogap regime in Bi2212, we use a novel generalized ab initio LDA + DMFT + Σ_k hybrid scheme. This scheme is based on the strategy of one of the most powerful computational tools for real correlated materials: the local density approximation (LDA) + dynamical mean-field theory (DMFT). Conventional LDA + DMFT equations are here supplied with an additional (momentum-dependent) self-energy Σ_k in the spirit of our recently proposed DMFT + Σ_k approach taking into account pseudogap fluctuations. In the present model, Σ_k describes nonlocal correlations induced by short-range collective Heisenberg-like antiferromagnetic spin fluctuations. The effective single-impurity problem of the DMFT is solved by the numerical renormalization group (NRG) method. Material-specific model parameters for the effective x ² − y ² orbital of Cu-3d shell of the Bi2212 compound, e.g., the values of intra-and interlayer hopping integrals between different Cu sites, the local Coulomb interaction U, and the pseudogap potential Δ were obtained within the LDA and LDA + DMFT schemes. Here, we report on the theoretical LDA + DMFT + Σ_k quasiparticle band dispersion and damping, Fermi surface renormalization, momentum anisotropy of (quasi)static scattering, densities of states, spectral densities, and angular-resolved photoemission (ARPES) spectra, taking into account pseudogap and bilayer splitting effects for normal (slightly) underdoped Bi2212 (δ = 0.15). We show that LDA + DMFT + Σ_k successfully describes strong (pseudogap) scattering close to Brillouin zone boundaries. Our calculated LDA + DMFT + Σ_k Fermi surfaces and ARPES spectra in the presence of pseudogap fluctuations are almost insensitive to the bilayer splitting strength. However, our LDA-calculated value of bilayer splitting is rather small to describe the experimentally observed peak-dip-hump structure. The results obtained are in good semiquantitative agreement with various recent ARPES experiments. The article was submitted by the authors in English.     

First principle calculation of accurate native defect levels in CaF<Subscript>2</Subscript>

We report on the first principle density functional calculation of the charge transition levels of native defects (vacancies and interstitials) in CaF₂ structure. The transition level was defined as the Fermi level where two charge states of given defect have the same formation energy. The common error in the band gap inherited to semiclocal density functional has been accounted for by incorporating the hybrid density functional method, leading to correct placement of the transition levels within the band gap. The band gap size from hybrid calculation has been validated using the full potential, Linearized Augmented Planewave method with the Modified-Becke-Johnson exchange potential. Prior to level calculations, we ensured that an agreement between the formation energies from small (95–97 atoms) and large (323–325 atoms) supercells was achieved after applying the Makov-Payne correction method. Our calculated transition level for the anion vacancy was 2.97 eV below the conduction band, agreeing with the experimental optical absorption band at 3.3 eV associated with the electron transition from the ground state F-center to the conduction band in CaF₂.     

Band structure and the magnetic and elastic properties of SrFeO<Subscript>3</Subscript> and LaFeO<Subscript>3</Subscript> perovskites

The band structure and the magnetic and elastic characteristics of SrFeO₃ and LaFeO₃ perovskites with ferromagnetic and antiferromagnetic collinear spin configurations (of the A, C, and G types) are investigated using the ab initio pseudopotential method (the VASP program package) with the inclusion of the single-site Coulomb correlations (the LSDA + U formalism). It is shown that, in the pressure range 0–50 GPa, the most stable states are the ferromagnetic metal state for the SrFeO₃ compound and the antiferromagnetic insulator state of the G type for the LaFeO₃ compound.     

Electronic and optical properties of Fe<Subscript>2</Subscript>SiO<Subscript>4</Subscript> under pressure effect: ab initio study

We report first-principles studies the structural, electronic, and optical properties of the Fe₂SiO₄ fayalite in orthorhombic structure, including pressure dependence of structural parameters, band structures, density of states, and optical constants up to 30 GPa. The calculated results indicate that the linear compressibility along b axis is significantly higher than a and c axes, which is in agreement with earlier work. Meanwhile, the pressure dependence of the electronic band structure, density of states and partial density of states of Fe₂SiO₄ fayalite up to 30 GPa were presented. Moreover, the evolution of the dielectric function, absorption coefficient (α(ω)), reflectivity (R(ω)), and the real part of the refractive index (n(ω)) at high pressure are also presented.     

Magnetic properties of the ordered and disordered double perovskite Sr<Subscript>2</Subscript>Fe<Subscript>1+x</Subscript>Mo<Subscript>1−x</Subscript>O<Subscript>6</Subscript> (−1 ≤ x ≤ 1/3)

We have studied the effect of cationic disorder on the spin polarization of the double perovskite system Sr₂Fe_1+x Mo_1−x O₆ with  −1 ≤ x ≤ 1/3. The composition x = 0 corresponds to the well-known double-perovskite Sr₂FeMoO₆, which is expected to have complete spin polarization, however all samples present some degree of Fe/Mo disorder which reduces the tunneling magnetoresistance in granular samples. We consider an electronic model within the renormalized perturbation expansion Green’s functions, consisting in a correlated electron picture with localized Fe-ions and itinerant electrons interacting with the local spins via a double-exchange type mechanism. Our results show the influence of disorder on the density of states and the ground-state properties, particularly on the spin polarization over the whole range of x.     

Structural,elastic, electronic,optical and thermal properties of c-SiGe<Subscript>2</Subscript>N<Subscript>4</Subscript>

We have investigated the structural, elastic, electronic, optical and thermal properties of c-SiGe₂N₄ by using the ultrasoft pseudopotential density functional method within the generalized gradient approximation. The calculated structural parameters, including the lattice constant, the internal free parameter, the bulk modulus and its pressure derivative are in agreement with the available data. The independent elastic constants and their pressure dependence, calculated using the static finite strain technique, satisfy the requirement of mechanical stability, indicating that c-SiGe₂N₄ compound could be stable. We derive the shear modulus, Young’s modulus, Poisson’s ratio and Lamé’s coefficients for ideal polycrystalline c-SiGe₂N₄ aggregate in the framework of the Voigt-Reuss-Hill approximation. We estimate the Debye temperature of this compound from the average sound velocity. Band structure, density of states, Mulliken charge populations and pressure coefficients of energy band gaps are investigated. Furthermore, in order to understand the optical properties of c-SiGe₂N₄, the dielectric function, refractive index, extinction coefficient, optical reflectivity and electron energy loss are calculated for radiation up to 40 eV. Thermal effects on some macroscopic properties of c-SiGe₂N₄ are predicted using the quasi-harmonic Debye model in which the lattice vibrations are taken into account. We have obtained successfully the variations of the primitive cell volume, volume expansion coefficient, heat capacities and Debye temperature with pressure and temperature in the ranges of 0–40 GPa and 0–2000 K. For the first time, the numerical estimates of the elastic constants and related parameters, and the thermal properties are performed for c-SiGe₂N₄.     

Pressure-induced modifications of crystal and magnetic structure of oxygen deficient La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3-d</Subscript> manganites

The crystal and magnetic structures of the oxygen deficient manganites La_0.7Sr_0.3MnO_3-d (d = 0.15, 0.20) have been studied by means of powder neutron diffraction over the 0–5.2 GPa pressure and 10–290 K temperature ranges. La_0.7Sr_0.3MnO_2.85 exhibits a coexistence of rhombohedral and tetragonal (I4/mcm) crystal structures and below T_g ~ 50 K a spin glass state is formed. La_0.7Sr_0.3MnO_2.80 exhibits a tetragonal (I4/mcm) crystal structure. Below T_g ~ 50 K a phase separated magnetic state is formed, involving coexistence of C-type AFM domains with spin glass domains. In both compounds the crystal structure and magnetic states remain stable upon compression. The factors leading to the formation of different magnetic states in La_0.7Sr_0.3MnO_3-d (d = 0.15, 0.20) and their specific high pressure behavior, contrasting with that of the stoichiometric A_0.5Ba_0.5MnO₃ (A = Nd, Sm) compounds showing pressure-induced suppression of the spin glass state and the appearance of the FM state, are analysed.     

Magnetic structure and magnetic excitations in the two-dimensional spin system of the Cu<Subscript>3</Subscript>B<Subscript>2</Subscript>O<Subscript>6</Subscript> compound

This paper reports on the results of measurements of the magnetic susceptibility, heat capacity, neutron scattering, muon spin relaxation, and electron paramagnetic resonance in Cu₃B₂O₆ for the study of the ground state of the spin system of this compound. The results obtained suggest that, at a temperature of 10 K, the spin subsystem of the crystal, which consists of single spins and clusters of pairs and fours of spins interacting with one another, undergoes a transition to a state representing a superposition of the singlet (for clusters) and magnetically ordered (for single spins) states.     

Shift of the Fermi level during cointercalation of copper and iron into TiSe<Subscript>2</Subscript>

The influence of copper intercalation into the TiSe₂ compound on the Fermi energy has been investigated using two independent methods. The first method is based on the analysis of the amplitude of the deformation (induced by impurity intercalation and providing the formation of polarons) as a function of the binding energy of the band of polaron states. For this purpose, the Fe _x Cu _y TiSe₂ system has been synthesized for the first time by cointercalation of copper and iron into the TiSe₂ lattice and studied. The second method consists in measuring the electromotive force of an open-circuit electrochemical cell with respect to a metal reference electrode. Both methods lead to consistent results in the range of moderate copper contents. However, considerable discrepancies have been observed in the copper concentration range that corresponds to the beginning of filling of Cu/Ti hybrid states. These discrepancies are explained by the softening of the lattice due to an increase in the density of states at the Fermi level.