Separation of amines by ligand exchange: Part IV ligand exchange with chelating resins and cellulosic exchangers

Chelating, sulfonic and cellulosic exchangers were compared in ligand exchange chromatography. Chelating resins retain metal ions the best, but have a low ligand binding capacity. Cellulosic exchangers show excessive metal leakage. Sulfonated polystyrene resins loaded with nickel ions give best results in most cases. Data are presented on ligand exchange chromatography of simple aliphatic amines, hydrazine and substituted hydrazines, purine and pyrimidine bases.     

Synthesis, characterization and evaluation of sulfonic resins as catalysts

Ion-exchange resins have been often used as catalysts especially those based on styrene-divinylbenzene copolymers with sulfonic acid groups in the aromatic rings of polymer chains. That is due to the advantages of heterogenous catalysis over the homogeneous acid catalysis. Moreover, resin catalysts can often lead to high selectivity in organic reactions due to the matrix effects. Therefore, the study of copolymers synthesis conditions to determine the type of polymer structure produced as well as the characterization of sulfonic resins obtained thereof are of great interest. The current paper describes the synthesis, characterization and evaluation as catalysts of sulfonic resins derived from polymer supports synthesized by aqueous suspension polymerization of styrene and divinylbenzene. The reaction conditions were varied and polymer supports with different physical properties and morphological characteristics were obtained. The polymer supports were chemically modified by sulfonation. The resultant sulfonic resins had their catalyst activity evaluated in the esterification of acetic acid with n-butanol.     

Controlled drug release studies of atenolol using differently sulfonated acryloxyacetophenone and methyl methacrylate copolymer resins as drug carriers

2-Acryloxyacetophenone(AAP) was prepared and subjected to suspension polymerization with methyl methacrylate(MMA) using azobisisobutyronitrile(AIBN) as free radical initiator.The differently sulfonated AAP-MMA cross-linked copolymer cationic exchange resins were prepared by sulfonation with concentrated sulphuric acid at 70 °C.Several characteristics of the prepared resins were evaluated,i.e.FTIR,the ion-exchange capacity(IEC),thermo gravimetric analysis(TGA),particle size distribution and microscopic morphology.The resin characteristics were altered with degree of sulfonation,providing that differently sulfonated resins could be prepared.The behavior of atenolol(ATL) loading and in vitro release in the USP stimulated gastric and intestinal fluids of the obtained resins were evaluated.The drug loaded in the resin increased with increasing degree of sulfonation and hence the drug binding site in resin employed.The drug release was lower from the resins with higher content of sulfonic group due to the increase in the diffusive path depth.The drug release was a little lower in stimulated gastric fluid(SGF) than in stimulated intestinal fluids(SIF).The basic groups,ionized to a little greater extent in SGF and preferred binding with the resin rather than releasing.Hence,the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Acid–base Properties of Ion-exchange Resins. Dissociation and Swelling of Resin Copolymers of Methacrylic Acid,Methyl Methacrylate,Divinylbenzene, and Ethylvinylbenzene

The dissociation, capacity, swelling, and water content of crosslinked methacrylic acid—methyl methacrylate resins have been measured. Resins were prepared with different degrees of crosslinking for the same carboxylate content, and vice versa. The ionic strength of the external solution was also varied, and the behavior of commercial resins compared with that of the laboratory resins. Potentiometric titration curves were obtained, and curves were also obtained by back-titration of the salt form of the resins with acid. The capacities showed that almost all carboxyl groups are accessible in resins containing 2.5% or 4.0% divinylbenzene, but not in those containing 8% or 12%. For these highly crosslinked resins the back-titration curves differed from the forward curves. Apparent dissociation constants pK′_a = pH + n log [(1 ? α)/α] decreased with increased ionic strength, increased with increased crosslinking, and showed no trend with carboxylate content. Swelling is decreased by increased salt concentration, particularly for lightly crosslinked resins. Maximum swelling is achieved at about 80% dissociation. The reciprocal of the swollen volume is proportional to the per cent of divinylbenzene. Commercial resins showed much lower swelling than laboratory prepared resins ostensibly having the same composition. The Gibbs-Donnan theory of resin dissociation was applied to calculate the intrinsic dissociation constant (pK′₀). Assuming a model of randomly kinked chains dissolved in the sorbed solution, good agreement with the expected value of 4.85 was found (calcd. pK′₀ = 4.81 = 0.14), except for the most highly crosslinked resins. For polyampholyte resins, agreement was found by using a model having a uniform potential distribution throughout the resin (pK′₀ = 4.9).     

Separation of amines by ligand exchange : Part III. A comparison of different cation exchangers

The elution behavior of 4 amines, ethanolamine, diethanolanine, dimethylamine and n-butylamine, was studied on 4 cation-exchange resins and zirconium phosphate, all loaded with nickel ions. Aqueous ammonia was used for clution. Different selectivity orders were found with exchangers of different types. The carboxylic cation-exchange resin gave the sharpest bands, but 2% cross-linked sulfonic resin gave the best separation of these amines.     

Heat capacity,saturation vapor pressure,and thermodynamic functions of ethyl esters of C<Subscript>3</Subscript>–C<Subscript>5</Subscript> and C<Subscript>18</Subscript> carboxylic acids

The heat capacities of ethyl propanoate (EPr), ethyl n-pentanoate (EPen), and ethyl n-octadecanoate (ethyl stearate, ESt) were measured by vacuum adiabatic calorimetry in the temperature range of 6 to 373 K. Triple point temperatures, fusion enthalpies and entropies, and purity of the samples of the sub-stances under study were determined. The saturation vapor pressures for EPr and EPen were determined by comparative ebulliometry in an atmospheric pressure range of 4.0 to 101.7 kPa. The normal boiling points and vaporization enthalpies vs. temperature were obtained. The standard thermodynamic functions (S, H, and G) were calculated for the condensed and ideal gas states on the basis of the experimental data. The vapor pressures of the atmospheric range were extrapolated to entire ranges of the liquid phases of EPr and EPen using the principle of corresponding states and the combined processing of pT parameters and low-temperature differences in the heat capacities of an ideal gas and liquid.     

Cross-linked poly-vinyl polymers versus polyureas as designed supports for catalytically active M nanoclusters: Part II. Pd/cross-linked poly-vinyl polymers versus Pd/EnCat™30NP in mild hydrogenation reactions

Innovative Pd⁰ heterogeneous catalysts were prepared upon using cross-linked, gel-type, functional acrylic polymers as the supports, along a simple route in use in our laboratories since long. The supports were obtained by polyaddition co-polymerization of N,N-dimethylacrylamide with either 2-acrylamido-2-methylpropane sulfonic acid, methacrylic acid or 4-vinylpyridine, and ethylene glycoldimethacrylate (cross-linker). The performance of these catalysts in the hydrogenation of cyclohexene, trans-methylcinnamate and 4-chloro-2-nitroanisole was compared with that of commercial Pd⁰/EnCat 30NP, produced by Reaxa. One of the catalysts (sulfonic resin as the support) behaved very well as far as activity, stability and selectivity are concerned. These results suggest that heterogeneous metal catalysts supported on polyaddition resins could be developed to become interesting materials for technical applications.     

Polycondensation Products of Phloroglucine with Difunctional Aliphatic Amines

The known reaction of condensation of a strong amine with phloroglucine under quite mild conditions was the starting point for synthesis of a new series of macromolecular resins not previously dèscribed. Phloroglucine has been condensed with a series of nine aliphatic diamines in aqueous solution under atmospheric pressure. The resins obtained are dark powders, which can be molded under increased pressure in the temperature range of 175–310°C. The thermal, mechanical, chemical, and electrical properties of the new resins have been examined and their structure confirmed. Some properties of resins can be calculated by means of approximate mathematical formulas.     

Curing mechanism for phenol—formaldehyde resins

A pressure DTA method was used to study the curing of resins. The hardening of novolacs by hexamine was studied at pressures up to 5000 kg/cm². The application of the pressure DTA method to the thermal curing of some dioxymethylated para-substituted phenols indicates that the endothermic peak observed at about 75°C at ambient pressure is due to the superposition of two peaks due to melting of the substance and formation of ester bonds.     

Magnetic properties of dilute magnetic semiconductor Cd<Subscript>0.82</Subscript>Mn<Subscript>0.18</Subscript>GeAs<Subscript>2</Subscript> under high pressures

We have studied the effect of high pressures on the electrical and magnetic properties of dilute magnetic semiconductor Cd_0.82Mn_0.18GeAs₂. Electrical resistivity, Hall coefficient, transverse and longitudinal magnetic resistance, and magnetic susceptibility have been measured under high pressures (up to 9 GPa). The energy of a manganese impurity level was estimated at 155 meV from electrical resistivity and Hall factor versus temperature curves at the atmospheric pressure. Structural and magnetic phase transitions have been discovered in Hall resistance versus magnetic field curves measured at various temperatures; abnormal and normal Hall factors have been calculated.     

Polyelectrolytes prepared from perfluoroalkylaryl macromolecules

The synthesis of a new generation of high-capacity oxidation-resistant ion-exchange resins and membranes is described which are sulfonic acid polyelectrolytes prepared from high molecular weight poly-α,β,β-trifluorostyrene. The difficult sulfonation of poly-α,β,β-trifluorostyrene is discussed in terms of the finding that this sulfonation must be effected upon an aromatic ring possessing a meta-directing substituent group. The oxidative stability of these new types of perfluoroalkyl aromatic sulfonic acid polyelectrolytes is both demonstrated and described with comparisons to their polystyrenesulfonic acid homologs. The difference in their oxidation–depolymerization stabilities is described in terms of benzylic carbon substituents.     

SYNTHESIS, STRUCTURE AND PROPERTIES OF INTERPENETRATING SULFONIC ACID RESINS WITH HIGH CAPACITY

Two series of interpenetrating sulfonic acid resins (ISAR), 10×n and n×10, were prepared by means of the wet method, and the physicochemical, thermodynamic and kinetic properties of the ISAR were measured. The results show: 10×n resins exhibit better properties than n×10 ones, mainly in higher apparent degree of crosslinking and larger conformational entropy effect, among which, 10×1 resin exhibits the best thermodynamic and kinetic properties. In the DTA graphs of n×10 resins, there are two T_g and two T_(ox), but in those of 10×n, only one T_g and one T_(ox). This result well supports the conclusion that 10×n resins have much better interpenetrating structural aspects.     

Antibacterial effect of silver nanoparticles deposited on corona‐treated polyester and polyamide fabrics

The possibility of using a corona treatment (electrical discharge at atmospheric pressure) for fiber surface activation, which can facilitate the loading of silver nanoparticles (NPs) from colloids onto the polyester (PES) and polyamide (PA) fabrics and thus improve their antibacterial properties, was studied. Bactericidal efficiency and its laundering durability on silver‐loaded fabrics for Gram‐positive bacterium Staphylococcus aureus and Gram‐negative bacterium Escherichia coli were evaluated. The fiber morphology after corona treatment and subsequent loading of silver NPs was followed by SEM. Corona‐treated fabrics loaded with silver NPs exhibited better antibacterial properties in comparison with untreated fabrics. In order to obtain acceptable laundering durability, it is necessary to use highly concentrated silver colloids. Copyright © 2008 John Wiley & Sons, Ltd.     

Trimerization of isobutene over cation exchange resins: Effect of physical properties of the resins and reaction conditions

Oligomerization of isobutene has been investigated using several cation exchange resins in order to produce triisobutenes that are useful feedstock for heavy alkylates and neo-acids. Trimers selectivity increases with increasing isobutene conversion. High isobutene conversion is obtained at high temperature and low space velocity by using macroporous cation exchange resins that have high concentration of sulfonic acid groups. Under selected conditions (viz., isobutene WHSV: 10 h⁻¹; temperature: 70 °C; catalyst: Amberlyst-35), the isobutene is quantitatively oligomerized with higher than or equal to 70% selectivity for trimers. The wet resin catalysts containing water or ethanol are very stable for the oligomerization up to about 70 h contrary to the gradual decrease in the conversion with dehydrated catalysts.     

Synthesis of Stoichiometric and Bulk CrN through a Solid‐State Ion‐Exchange Reaction

Chromium mononitride (CrN) exhibits interesting magnetic, structural, and electronic properties for technological applications. Experimental reports on these properties are often inconsistent owing to differences in the degree of nonstoichiometry in CrN_x. To date, the preparation of bulk and stoichiometric CrN has been challenging; most products are in the form of a thin film produced by non‐equilibrium processes, and are often nonstoichiometric and poorly crystallized. In this work, we formulated a solid‐state ion‐exchange route for the synthesis of CrN under high pressure. The final CrN product is phase‐pure, stoichiometric, and well‐crystallized in the bulk form. Near‐stoichiometric and well‐crystallized CrN can be synthesized using the same route at atmospheric pressure, making massive and industrial‐scale production technologically feasible. The successful synthesis of stoichiometric and bulk CrN is expected to open new opportunities in diverse areas of fundamental research.     

Gas‐phase pyrolytic reactions of esters of 2‐pyridine and 8‐quinoline sulfonic acid

The rates of gas‐phase thermal elimination reaction of esters of 2‐pyridine sulfonic acid and 8‐quinoline sulfonic acid have been measured over at least 50° for each compound. The relative rates of the first‐order unimolecular decomposition at 500 K for the primary:secondary esters suggest that C O bond breaking is kinetically more significant than C H bond breaking, leading to a transition state of carbocationic character. This is consistent with the electron‐donating effect provided by the methoxy substituent in 2‐p‐methoxyphenylethyl of 2‐pyridine and 8‐quinoline sulfonate esters stabilizing the carbocation center. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 771–775, 2000     

Stabilization of microwave arc plasmas of hydrocarbons at atmospheric pressure

Pure hydrocarbon plasmas have been generated at low pressures with good efficiency using methane as a reactant. Hydrocarbon plasma discharges containing high energy, free radical, and ionized intermediates were analyzed in situ using emission spectroscopy. Emission spectra were correlated with analytical data obtained from resultant product mixtures and literature assignments of emission bands in order to identify these intermediates. Stabilization of atmospheric methane plasmas using argon as a diluent has also been demonstrated in this study. Emission spectroscopy has also been used to identify reaction intermediates formed in plasmas at high pressures. Distinct differences in plasma discharges have been observed as a function of pressure, power, and methane concentrations at the molecular level using in situ spectroscopic techniques.     

Synthesis of Nanocomposites from Pd0 and a Hyper‐Cross‐Linked Functional Resin Obtained from a Conventional Gel‐Type Precursor

Hyper‐cross‐linked resins stemming from a gel‐type poly‐chloromethylated poly(styrene‐co‐divinylbenzene) resin (GT) have been investigated by a multi‐methodological approach based on elemental analysis, scanning electron microscopy, X‐ray microanalysis, and solvent absorption. The hyper‐cross‐linking of the parent resin was accomplished by Friedel–Crafts alkylation of the phenyl rings of the resins with the chloromethyl groups. This produced a permanent pore system comprising both micropores (<2.0 nm in diameter) and mesopores (2.2 nm). The chloromethyl groups that did not react in the hyper‐cross‐linking step were transformed into methylmercaptan groups and the latter were then converted into sulfonic groups by oxidation with hydrogen peroxide. By this procedure the extensive permanent porosity of the parent unsulfonated hyper‐cross‐linked polymer (HGT) was retained by the sulfonated polymer (HGTS). The final exchange capacity of HGTS was determined to be 0.36 mmol g^?1. HGTS was easily metalated with Pd^II and the subsequent reduction of the metal centers with either aqueous sodium borohydride, formaldehyde, or dihydrogen produced three Pd⁰/HGTS nanocomposites. The metal nanoparticles had diameters in the 1–6 nm range for all the nanocomposites, as determined by TEM, but with somewhat different distributions. When formaldehyde was used, more than 90 % of the nanoparticles were less than 3 nm and their radial distribution throughout the polymer beads was quite homogeneous. These findings show that with this reducing agent the metal nanoparticles are generated within the pore system of the polymer matrix, hence their size is controlled by the dimensions of the pores of the polymeric support.     

The Effect of Pressure on the Thermodynamic Properties of Propan-1-ol + n-Heptane Mixtures

The densities of propan-1-ol + n-heptane have been measured over the whole composition range at atmospheric pressure and at temperatures from 293 to 318 K using a vibrating tube densimeter. The densities and heat capacities for propan-1-ol + n-heptane mixtures at pressures up to 120 MPa and for temperatures ranging from 293 to 318 K were calculated using the speeds of sound measured under elevated pressures, together with the densities and heat capacities at atmospheric pressure. A modified method, based on the suggestion of Davis and Gordon J. Chem. Phys. 46 (1967), has been applied. The effect of pressure and temperature on the isentropic compressibility, the excess volume, and the excess heat capacity are discussed.     

Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis,curing kinetics,and network properties

Several phenol‐urea‐formaldehyde (PUF) cocondensed resol resins were synthesized by different procedures. The curing kinetics and network properties of these PUF resins were examined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). A kinetic study indicated that the activation energy values of PUF resins are generally higher than those of phenol‐formaldehyde (PF) resins during curing processes, but the curing rates of PUF resins are faster than those of PF resins. The pH values of PUF systems have a significant influence on the rate constants, although they affect the activation energy very slightly. Moreover, the dependence of activation energy on the conversion showed that there are more individual reactions with different activation energies occurring during the curing processes in PUF resins than in PF resins. The decomposition of methylene ether bridges to form methylene bridges probably occurs at high temperature in PUF resins. DMTA data indicated that the network rigidity of PUF resins is slightly lower than that of PF resin. The gel point and T_{tan δ2} transition measured by DMTA were consistent with the kinetic results obtained from the DSC data, but they were also related to the physical and mechanical properties of the network, especially with regard to the T_{tan δ2} transition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1929–1938, 2003