Spectrofluorometric determination of kynurenic acid with horseradish peroxidase in the presence of hydrogen peroxide.

The catalytic activity of horseradish peroxidase (HRP) in the presence of hydrogen peroxide has been investigated for the fluorescent derivatization of kynurenic acid under conditions with no exposure to light. Non-fluorescent kynurenic acid was converted into a fluorescent compound (Ex: 367 nm, Em: 470 nm) with HRP in the presence of hydrogen peroxide, and the optimum conditions of this fluorescent derivatization were investigated. Moreover, this fluorescent derivatization was developed for a spectrofluorometric determination of trace amounts of kynurenic acid by measuring the fluorescence intensity of the fluorescent compound. The calibration curve obtained was linear from 1.0 to 10.0 nmol of kynurenic acid in a 1.0 mL sample solution. The relative standard deviation at 5.0 nmol of kynurenic acid was 5.71% (n=5). By adjusting the bandwidths for both the excitation and emission to 15 nm, the calibration curve was also linear in the range between 0.1 to 1.0 nmol of kynurenic acid in a 1.0 mL sample solution. This method was applied to the fluorometric determination of trace amounts of kynurenic acid in the control sera.     

Microcantilevers modified by horseradish peroxidase intercalated nano-assembly for hydrogen peroxide detection.

Detection of hydrogen peroxide is of industry interest and of biological importance. Here we report a new approach to hydrogen peroxide measurement using multilayer modified microcantilevers. Through a layer-by-layer nanoassembly technique, horseradish peroxidase was intercalated into a nanoscale multilayer assembly on one surface of microcantilevers. These enzyme-functionalized microcantilevers deflected in response to hydrogen peroxide concentrations in the nanomolar level. The magnitudes of bending were proportional to the concentrations of hydrogen peroxide. Furthermore, our study also showed that microcantilever technique may be used as a novel, more sensitive tool for the study of the conformational or structural changes of enzymes or proteins on surfaces.     

Spectrophotometric determination of enzymatically generated hydrogen peroxide using Sol-Gel immobilized horseradish peroxidase

Peroxidase entrapment in different Sol-Gel matrices was successful. The enzyme did not show a decrease in activity for at least 2 months as well as storage at room temperature and dry condition for periods exceeding 3 weeks. It was evident that the enzymatic activity was a function in the type of the alkoxysilane precursor. In addition, the optimum temperature which resulted in maximum enzymatic activity was also dependent on the type of Sol-Gel matrix. Excellent results were obtained for the determination of glucose in serum samples using soluble glucose oxidase in conjunction with the Sol-Gel entrapped peroxidase. The enzymatically produced hydrogen peroxide is oxidized by the entrapped peroxidase yielding oxygen which oxidizes the faint blue variamine blue into the intensely violet colored species (the molar absorptivity is about 1.8 x 10(4) 1 mol(-1) cm(-1)). The characteristics of this chromogenic system as well as optimized conditions for its use in the spectrophotometric determination of enzymatically generated hydrogen peroxide were investigated. Excellent agreement between the results obtained by the proposed method and the widely used standard method, utilizing a commercial reagents kit, was always observed.     

Immobilized anthraquinone for redox mediation of horseradish peroxidase for hydrogen peroxide sensing

The detection of hydrogen peroxide is detailed using horseradish peroxidase and anthraquinone. Both species are immobilized on a glassy carbon electrode substrate. This dual immobilization gives rise to lower detection limits compared with the situation when either of the species is immobilized. Detection limits of 40 nM are reported within physiologically-relevant media.     

Incorporation of horseradish peroxidase in a Kieselguhr membrane and the application to a mediator-free hydrogen peroxide sensor.

Horseradish peroxidase was incorporated in a kieselguhr membrane. The electron-transfer process of the enzyme was examined by cyclic voltammetry. It was observed that the electron-transfer reactivity of horseradish peroxidase was greatly enhanced, and that direct electrochemistry was accordingly feasible. Using the merits of the direct electron-transfer reactivity of horseradish peroxidase and its specific enzymatic catalysis towards hydrogen peroxide, an unmediated hydrogen peroxide biosensor was constructed. The calibration plot of this hydrogen peroxide sensor was linear in the range of 2.0 x 10(-6) mol/L - 6.5 x 10(-4) mol/L. The relative standard deviation was 4.1% for 6 successive determinations at a concentration of 1.0 x 10(-4) mol/L. The detection limit was 1.0 x 10(-6) mol/L.     

Electrocatalytic activity of horseradish peroxidase/chitosan/carbon microsphere microbiocomposites to hydrogen peroxide

Colloidal carbon microspheres (CMS) are dispersed in chitosan (CHIT) solution to form an organic-inorganic hybrid with excellent micro-environment for the immobilization of biomolecules. A novel amperometric biosensor for the determination of hydrogen peroxide (H(2)O(2)) has been constructed by entrapping horseradish peroxidase (HRP) in as-synthesized CMS/CHIT hybrid. The modification of glassy carbon electrode is made by a simple solution-evaporation method. The electrochemical properties of the biosensor are characterized in electrochemical methods. The proposed biosensor shows high sensitive determination and fast response to H(2)O(2) at -0.15 V. The constructed HRP/CHIT/CMS/GC electrode also exhibits a fine linear correlation with H(2)O(2) concentration. The calculated value of the apparent Michaelis-Menten constant, 2.33 mM, suggests that the HRP in CMS/CHIT hybrid keeps its native bioactivity and has high affinity for H(2)O(2).     

Nanomolar hydrogen peroxide detection using horseradish peroxidase covalently linked to undoped nanocrystalline diamond surfaces

In this article, we report on the low-level detection of hydrogen peroxide, a key player in the redox signaling pathway and a toxic product in the cellular system, using a colorimetric solution assay. Amine-terminated undoped nanocrystalline diamond thin films were grown on glass using a linear-antenna microwave plasma CVD process. The diamond surface consists mainly of -NH(2) termination. The aminated diamond surface was decorated with horseradish peroxidase (HRP) enzyme using carbodiimide coupling chemistry. The success of the HRP immobilization was confirmed by X-ray photoelectron spectroscopy (XPS). The enzymatic activity of immobilized HRP was determined with a colorimetric test based on the HRP-catalyzed oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sufonic acid (ABTS) in the presence of hydrogen peroxide. The surface coverage of active HRP was estimated to be Γ = 7.3 × 10(13) molecules cm(-2). The use of the functionalized diamond surface as an optical sensor for the detection of hydrogen peroxide with a detection limit of 35 nM was demonstrated.     

Reagentless enzyme electrode based on phenothiazine mediation of horseradish peroxidase for subnanomolar hydrogen peroxide determination

The development and characterization of a highly sensitive enzyme immobilized carbon based electrode for the determination of subnanomolar concentrations of hydrogen peroxide in aqueous samples is described. The biosensor consists of horseradish peroxidase (HRP) immobilized in solid carbon paste along with a suitable redox mediator. The latter allows the acceleration of the electroreduction of HRP in the presence of hydrogen peroxide. Several phenothiazines as mediators are investigated in a comparative manner and with respect to dimethylferrocene using cyclic voltammetry and amperometry. Insolubilization of the HRP in the solid carbon paste is achieved by cross-linking the enzyme with glutaraldehyde and bovine serum albumin. Several experimental parameters such as pH, mediator and enzyme content are considered. The hydrogen peroxide determination is better carried out in 0.1 M acetate buffer, pH 4.5, by amperometry at an applied potential of 0.0 V versus Ag/AgCl, 3 M NaCl concentration and by using the phenothiazine base as redox mediator. The biosensor response is linear over the concentration range 2 nM-10 microM with a detection limit of 1 nM. The linear range of the hydrogen peroxide response without a mediator in the biosensor is found between 2 and 40 microM. The biosensor can be used for more than 180 measurements. Additional modification of the electrode by incorporation of Nafion SAC-13 microparticles in the solid carbon paste allows detection of concentrations of hydrogen peroxide as low as 0.1 nM.     

Mimesis of peroxidase by Mn-TMPyP in the catalytic fluorescence reaction of the homovanillic acid-hydrogen peroxide system

The fluorescence produced by the catalytic effect of the manganese (III)-tetrakis-(N-methylpyridinium)porphyrin complex (Mn-TMPyP) on the oxidation of homovanillic acid by hydrogen peroxide has been studied. The reaction product fluoresces at 424 nm (with excitation at 316 nm). Traces of hydrogen peroxide (1.3 × 10^–7–2.4 × 10^–6 M) and glucose (1.5–5.0 g/ml) can be determined with good accuracy and reproducibility. The characteristics of the mimetic enzyme Mn-TMPyP have been compared with those of horseradish peroxidase.     

Sol-gel encapsulated horseradish peroxidase: a catalytic material for peroxidation

This study addresses the viability of sol-gel encapsulated HRP (HRP:sol-gel) as a recyclable solid-state catalytic material. Ferric, ferric-CN, ferrous, and ferrous-CO forms of HRP:sol-gel were investigated by resonance Raman and UV-visible methods. Electronic and vibrational spectroscopic changes associated with changes in spin state, oxidation state, and ligation of the heme in HRP:sol-gel were shown to correlate with those of HRP in solution, showing that the heme remains a viable ligand-binding complex. Furthermore, the high-valent HRP:sol-gel intermediates, compound I and compound II, were generated and identified by time-resolved UV-visible spectroscopy. Catalytic activity of the HRP:sol-gel material was demonstrated by enzymatic assays by using I(-), guaiacol, and ABTS as substrates. Encapsulated HRP was shown to be homogeneously distributed throughout the sol-gel host. Differences in turnover rates between guaiacol and I(-) implicate mass transport of substrate through the silicate matrix as a defining parameter in the peroxidase activity of HRP:sol-gel. HRP:sol-gel was reused as a peroxidation catalyst for multiple reaction cycles without loss of activity, indicating that such materials show promise as reusable catalytic materials.     

溶胶-凝胶壳聚糖/二氧化硅杂化复合膜固定辣根过氧化酶的H2O2电化学生物传感器的研制

利用溶胶 凝胶法制备壳聚糖 二氧化硅有机无机复合杂化膜,用于对辣根过氧化酶进行固定,制得测定H2O2的电流型生物传感器。以1mmol/LK4Fe(CN)6作为电子媒介体。研究了各种因素如壳聚糖与二氧化硅的比率、pH、温度、工作电位等对传感器响应电流的影响。计时电流法测定H2O2的线性范围为2.0×10-6～6.8×10-4mol/L,检出限为8.0×10-7mol/L。测得酶催化动力学参数米氏常数Km=0 87mmol/L。用该法对实际样品进行了测定。     

Kinetics of the catalytic oxidation of model compounds of lignin with hydrogen peroxide in the presence of peroxidase from horse-radish

A kinetic scheme was suggested for the oxidation of guaiacol, ferulic acid, acetovanilon, and vanillyl alcohol with hydrogen peroxide. A number of kinetic parameters were determined.     

An amperometric hydrogen peroxide biosensor based on immobilization of horseradish peroxidase on an electrode modified with magnetic dextran microspheres

A new kind of magnetic dextran microsphere (MDMS) with uniform shape and narrow diameter distribution has been prepared from magnetic iron nanoparticles and dextran. Horseradish peroxidase (HRP) was successfully immobilized on the surface of an MDMS-modified glassy-carbon electrode (GCE), and the immobilized HRP displayed excellent electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of experimental variables such as the concentration of HQ, solution pH, and the working potential were investigated for optimum analytical performance. This biosensor had a fast response to H₂O₂ of less than 10 s and an excellent linear relationship was obtained in the concentration range 0.20 μmol L⁻¹–0.68 mmol L⁻¹, with a detection limit of 0.078 μmol L⁻¹ (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant was estimated to be 1.38 mmol L⁻¹. Moreover, the selectivity, stability, and reproducibility of the biosensor were evaluated, with satisfactory results. Figure Amperometric response of the biosensor to successive additions of H₂O₂ and the plot of amperometric response vs. H₂O₂ concentration     

Enthalpy change and mechanism of oxidation of o-phenylenediamine by hydrogen peroxide catalyzed by horseradish peroxidase

The hydrogen peroxide-oxidation of o-phenylenediamine (OPD) catalyzed by horseradish peroxidase (HRP) at 37 °C in 50 mM phosphate buffer (pH 7.0) was studied by calorimetry. The apparent molar reaction enthalpy with respect to OPD and hydrogen peroxide were −447 ± 8 kJ mol⁻¹ and −298 ± 9 kJ mol⁻¹, respectively. Oxidation of OPD by H₂O₂ catalyzed by HRP (1.25 nM) at pH 7.0 and 37 °C follows a ping-pong mechanism. The maximum rate V_max (0.91 ± 0.05 μM s⁻¹), Michaelis constant for OPD K_m,S (51 ± 3 μM), Michaelis constant for hydrogen peroxide Km,H₂O₂ (136 ± 8 μM), the catalytic constant k_cat (364 ± 18 s⁻¹) and the second-order rate constants k₊₁ = (2.7 ± 0.3) × 10⁶ M⁻¹ s⁻¹ and k₊₅ = (7.1 ± 0.8) × 10⁶ M⁻¹ s⁻¹ were obtained by the initial rate method.     

Preparation and properties of horseradish peroxidase bound covalently to polystyrene beads. application in the semi-automatic determination of hydrogen peroxide with homovanillic acid as substrate

The preparation and properties of horseradish peroxidase covalently bound to polystyrene beads are described. A flow procedure for the spectrofluorimetric determination of hydrogen peroxide down to 1 ng ml^-1, with homovanillic acid as substrate, has been developed.     

Room temperature ionic liquid doped DNA network immobilized horseradish peroxidase biosensor for amperometric determination of hydrogen peroxide

A novel electrochemical H₂O₂ biosensor was constructed by embedding horseradish peroxide (HRP) in a 1-butyl-3-methylimidazolium tetrafluoroborate doped DNA network casting on a gold electrode. The HRP entrapped in the composite system displayed good electrocatalytic response to the reduction of H₂O₂. The composite system could provide both a biocompatible microenvironment for enzymes to keep their good bioactivity and an effective pathway of electron transfer between the redox center of enzymes, H₂O₂ and the electrode surface. Voltammetric and time-based amperometric techniques were applied to characterize the properties of the biosensor. The effects of pH and potential on the amperometric response to H₂O₂ were studied. The biosensor can achieve 95% of the steady-state current within 2 s response to H₂O₂. The detection limit of the biosensor was 3.5 μM, and linear range was from 0.01 to 7.4 mM. Moreover, the biosensor exhibited good sensitivity and stability. The film can also be readily used as an immobilization matrix to entrap other enzymes to prepare other similar biosensors. Figure Horseradish peroxidase (HRP) embedded in a 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF ₄ ) doped DNA network can be used to fabricate a HRP sensor for the determination of H₂O₂     

Amperometric biosensor for hydrogen peroxide based on coimmobilized horseradish peroxidase and methylene green in ormosils matrix with multiwalled carbon nanotubes

A novel amperometric biosensor for the analytical determination of hydrogen peroxide was developed. The fabrication of the biosensor was based on the coimmobilization of horseradish peroxidase (HRP), methylene green (MG) and multiwalled carbon nanotubes within ormosils; 3-aminopropyltrimethoxysilane (APTMOS), 2-(3,4-epoxycyclohexyl)ethyltrimethoxysilane (ETMOS) and phenyltrimethoxysilane (PHTMOS). APTMOS determined the hydrophilicity/hydrophobicity of the ormosils and PHTMOS and ETMOS increased the physical and mechanical strength of the ormosil matrix. The ormosil modified electrodes were characterized with SEM, UV-vis spectroscopy and electrochemical methods. Cyclic voltammetry and amperometric measurements demonstrated the MG coimmobilized with HRP in this way, displayed good stability and could efficiently shuttle electrons between immobilized enzyme and electrode, and MWCNTs facilitated the electrocatalytic reduction of H₂O₂ at reduced over potential. The Micheaelis constant of the immobilized HRP was 1.8 mM, indicating a high affinity of the HRP to H₂O₂ without loss of enzymatic activity in ormosil matrix. The prepared biosensor had a fast response of H₂O₂, less than 10 s, and excellent linear range of concentration from 5 × 10⁻⁷ to 2 × 10⁻⁵ M with the detection limit of 0.5 μM (S/N = 3) under the optimum conditions. At the same time, the influence of solution pH, effect of enzyme amount, steady-state applied potential and temperature on the biosensor were investigated. The enzyme electrode retained about 90% of its initial activity after 30 days of storage in a dry state at 4 °C. The preparation of the developed biosensor was convenient and showed high sensitivity with good stability.     

Identification of intermediates in the catalytic cycle of chloroperoxidase

Background: Chloroperoxidase (CPO) is the most versatile of the hemethiolate proteins, catalyzing the chlorination of activated CH bonds and reactions reminiscent of peroxidase, catalase, and cytochrome P450. Despite 30 years of continuous efforts, no intermediates of the enzyme's catalytic cycle have been identified except for compound I. Thus, in the absence of conclusive evidence it is generally believed that the halogenation of substrates proceeds by means of ‘free HOCl’ in solution.Results: The pH profile of chloroperoxidase from Caldariomyces fumago revealed a new active-site complex that can be detected only at pH 4.4. According to ultra-violet (UV) spectroscopy, and by comparison with suitable enzyme models, this intermediate is the HOCl adduct of the iron(III) protoporphyrin(IX). Inactivation of chloroperoxidase by diethyl pyrocarbonate, which interrupts the proton shuttle by modification of the distal histidine, led to the formation of the ⁻OCl adduct of the iron complex, which was identified by comparison with a corresponding active site analogue.Conclusions: The availability of enzyme models of heme-thiolate proteins allowed the identification by UV spectroscopy of both the ⁻OCl adduct and the HOCI adduct of the iron(III) protoporphyrin(IX) of chloroperoxidase. The existence of these previously elusive intermediates suggests that the chlorination catalyzed by CPO, and its corresponding active site analogue, proceeds by Cl⁺ transfer from the HOCl adduct to the substrate bound in the distal pocket of the enzyme.