Fabricating and aligning pi-conjugated polymer-functionalized DNA nanowires: atomic force microscopic and scanning near-field optical microscopic studies

We report a simple method to functionalize DNA with pi-conjugated polymer, forming highly aligned and integrated arrays of pi-conjugated polymer nanowires of a few nanometers diameter. pi-conjugated polymer, polyphenazasiline, having alkylammonium salts on the N atom (PPhenaz-TMA), synthesized in this study can be directly attached to DNA, which can be organized along stretched and aligned DNA molecules on surfaces as a template. Furthermore, PPhenaz-TMA/DNA nanowires were stretched and aligned on surfaces, even when PPhenaz-TMA/DNA complexes formed in solutions. The resulting PPhenaz-TMA/DNA nanowires could be easily converted to oxidized states or metallic nanowires by using adequate oxidant or metal salts. The direct visualization of PPhenaz-TMA/DNA nanowires and its structural changes have been studied by atomic force microscopy and scanning near-field optical microscopy.     

Immobilization of a fluorescent dye in Langmuir-Blodgett films

We immobilized a hemicyanine dye, Di-8-ANEPPS, in ordered thin films of an organic matrix, dihexadecyl phosphate (DHP), and we transferred the mixed monolayers onto solid support by the Langmuir-Blodgett technique. We used gold and quartz slides and indium tin oxide (ITO) evaporated on glass slides as substrates. The multilayers formation was confirmed by ellipsometric and contact angle measurements. The optical response of the nanostructures was investigated collecting UV-Vis absorption and fluorescence emission intensity profiles.     

Structuring of tricarbocyanine dye molecules in Langmuir-Blodgett films

The problems of formation of stable Langmuir monolayers containingN-sulfopropyl substituted thiatricarbocyanine dyes are considered: the effects of the composition of the mixture applied on the surface of an aqueous subphase and of the extent of compression of the monolayer on processes of ordering of molecular structure. Dyes are introduced into complex monolayers at the water-air interface and then are transferred on solid substrates as multilayered Langmuir-Blodgett (LB) films. For the first time the formation of J-aggregates has been observed for two tricarbocyanine dyes. The structure of J-aggregates depends on the composition of the mixture and the value of the constant pressure at which the transfer occurs. LB films of J-aggregated dyes are optically anisotropic, which is related to the fact that they are formed in the monolayer on the surface and there is no interlayer aggregation during the transfer to substrates. Heterodimers are formed in complex monolayers containing oppositely charged ions of dyes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1278–1283, July, 1995.The work was partially financially supported by the Foundation for Basic Research of the State Committee on Science and Technologies of the Ukraine (Project No. 2.2/48 Normal').     

Langmuir-Blodgett films of a cationic zinc porphyrin-imidazole-functionalized fullerene dyad: formation and photoelectrochemical studies

Electron donor-acceptor dyad ensembles of a water-soluble cationic zinc porphyrin (viz., zinc tetrakis(N-methylpyridinium)porphyrin tetrachloride, Zn(TMPyP)) and a C60 derivative that bears an imidazole ligand (viz., 2-(phenylimidazolyl)fulleropyrrolidine, C60im) were assembled during the formation of Langmuir and then Langmuir-Blodgett (LB) films. Surface pressure versus surface area isotherms and surface pressure time profiles, as well as Brewster angle microscopic images documented that the Langmuir films formed were remarkably stable. Subsequently, these Langmuir films were transferred onto different solid substrates, by using the LB technique, for spectroscopic and photoelectrochemical characterization. The UV-vis spectroscopic investigations confirmed that the water-soluble Zn(TMPyP) was, indeed, transferred together with C60im in the LB films. Upon visible light illumination of these LB films, deposited on the ITO transparent conductive supports, a photocurrent generated in the C60im-Zn(TMPyP) system is ascribed to an efficient photoinduced electron transfer from the electron donor, porphyrin singlet excited-state to the electron acceptor, C60. Overall, internal photon-to-current efficiency, IPCE, of the photoanodic current generation (with ascorbate as a sacrificial electron donor) in the ITO/C60im-Zn(TMPyP)/ascorbate/Pt construct is over 5x larger than that of the photocathodic system (with methyl viologen, MV2+, as a sacrificial electron acceptor) in the ITO/Zn(TMPyP)-C60im/MV2+/Pt construct. Highly ordered film stacking favors vectorial electron transfer within the dyad, giving rise to the highest IPCE values of 2.5% determined for a photoanode that was composed of around 20 monolayer films.     

Morphological and spectroscopic properties of thin films of self-assembling amphiphilic porphyrins on a hydrophilic surface as revealed by scanning near-field optical microscopy

We fabricated porphyrin thin films on mica surfaces from acidic aqueous solutions of the preorganized H-aggregates of amphiphilic porphyrins by the simple spin-coating method. The morphological and spectroscopic properties of the film were investigated by scanning near-field optical microscopy. The results obtained in this study demonstrate that the preorganized structure in solution can be transferred as a thin film with a thickness of the monolayer level without losing their substantial structure and photophysical properties.     

Langmuir-Blodgett deposition and non-linear optical properties of a two-legged dye

The two-legged dye, E-N-hexadecyl-2-[2-(4-octadecylaminophenyl)ethenyl]benzothiazolium iodide, adopts a ‘stretched’ rather than a ‘U-shaped’ configuration at the air/water interface and aligns with one of its hydrophobic alkyl groups adjacent to the subphase. Its Langmuir-Blodgett (LB) films are noncentrosymmetric but lack long-range order, with the chromophores having tilt angles relative to the substrate normal of 35 ± 2 ° in the monolayer and 50 ± 5 ° in a 300-layer film. The second-order susceptibility of the monolayer, its thickness and the real and imaginary components of the dielectric permittivity are χ_zzz⁽²⁾ = 80 pmV⁻¹ at 1.064 μm and l = 4.89 nm, ε_r = 3.21 and ε_i = 1.53 at 532 nm (λ_2ω). The second-harmonic intensity increases subquadratically with the number of LB layers, saturating after ca. 100 layers, the susceptibility decreasing with increasing film thickness.     

Photoresponse and anisotropy of rhodamine dye intercalated in ordered clay layered films

In order to elaborate organized two-dimensional arrangements of fluorescent dyes in host solid layered materials, rhodamine 6G (R6G) is encapsulated in supported thin films of laponite (Lap) clay. Clay films are elaborated by the spin-coating technique and their surface morphology is analyzed by scanning electron (SEM) and atomic force (AFM) microscopies. The internal order of the stacked clay layers is checked by X-ray diffraction technique (DRX). The thermostability of R6G in the Lap films is discussed on the basis of several thermogravimetric and calorimetric techniques (TG, DTA and DSC). The R6G adsorbed species in Lap films are characterized by absorption and fluorescence (steady-state and time-resolved) spectroscopies. Monomers, dimers and higher-order aggregates are identified for very low (<0.1%), moderate (1–25%) and high (>40% of the total cation exchange capacity, CEC, of the clay) dye content, respectively. Both non-fluorescence H-type and fluorescent J-type aggregates of R6G in Lap films are characterized.Absorption and fluorescence techniques with linearly polarized light are applied to evaluate the anisotropic photoresponse of R6G in Lap films, from which the preferential orientation of dye molecules with respect to the clay layers can be evaluated. The validity of the newly established fluorescence polarization is contrasted with the well-established absorption polarization method, and the emission spectroscopy with linearly polarized light can be applied to establish the preferential orientation of fluorophore molecular probes incorporated in any rigid and ordered 2D host materials, including monolayers and biological membranes.     

Surface enhanced fluorescence and Raman imaging of Langmuir-Blodgett azopolymer films

The spectroscopic properties and surface-enhanced spectra of Langmuir-Blodgett (LB) films of methacrylic homopolymer (HPDR13) are presented. It is shown that LB film displays strong fluorescence attributed to the spatial restrictions imposed by its structure. The emission is observed in conjunction with photoisomerization, a process clearly demonstrated by the formation of surface-relief gratings in the LB film [C.R. Mendon?a et al., Macromolecules 32 (1999) 1493]. Surface-enhanced Raman scattering (SERS), Surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF) were observed for LB films of HPDR13 deposited onto silver island films. SERS measurements were also carried out on a sample fabricated with one monolayer LB film deposited onto silver islands followed by one overlayer of silver (LB sandwiched between two layers of silver islands). The polymer interacts very weakly with the metal surface (physisorption), and the enhancement effect is determined by the local electric field enhancement. The strong SERS and SERRS signals were suitable for micro-Raman imaging. Line, area mapping and global images of the LB monolayer on silver island are reported. The transfer ratio in the fabrication of the LB suggests a homogeneous coating of the silver islands, thereby the chemical images show the variation of the SERS intensity due to surface enhancement.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4′-cyanobiphenyl (8CB) or 4- n -pentyl-4″-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Time-resolved and steady-state fluorescence spectroscopic studies of the human lens with comparison to argpyrimidine,pentosidine and 3-OH-kynurenine

The intrinsic fluorescence from the human lens on excitation in the UV region, referred to as blue lens autofluorescence, increases with age or in the presence of diabetes. The present study reveals that the relative contribution of compounds responsible for the blue autofluorescence appears to be a constant with age. Three potential candidates for the blue fluorescence were also studied with respect to fluorescence spectroscopic properties. These were argpyrimidine and pentosidine, both advanced glycation end products, and 3-hydroxykynurenine (3-OH-kynurenine), a photooxidative derivative of tryptophan. It was shown that the spectral properties of argpyrimidine and pentosidine are compatible with the observed blue fluorescence of the human lens, whereas the fluorescence from 3-OH-kynurenine is negligible.     

Time-resolved fluorescence depolarization studies of rotational relaxation in viscous media

Rotational relaxation times (τ_roi) were measured for xanthene dyes in several n-alcohols, ethylene glycol and glycerol by following the fluorescence depolarization using a single photon counting technique. Additional studies were made of the fluidity of the hydrocarbon micellar interior using pyrene derivatives as fluorescent probes. While the correlation between τ_roi and viscosity for the smaller n-alcohols is good, as anticipated by the models of Stokes—Einstein—Debye and later Perrin, a saturation in this correlation is observed in more viscous systems in accordance with recent molecular dynamics calculations. The influence of molecular structure on both viscosity and rotational relaxation times is also discussed. Pyrene, 1-pyrene suphonic acid and 1-pyrene butyeric acid exhibit rapid reorientation τ_roi ? 10^?9 s, in glycerol and micellar systems.     

IR and Raman spectroscopic study of the photopolymerization of Langmuir-Blodgett films of acetylenic acids

The UV induced photopolymerization of Langmuir-Blodgett films of lead salt of 2-docosynoic acid (CH₃(CH₂)₁₈C=CCOOH) is studied using IR and Raman spectroscopy. It is found that the films are a highly ordered system with trans-configuration of alkyl chains and a bridged complex generated between the carboxyl group and the lead ion. Based on a change in the absorption band intensity in the IR spectra corresponding to the triple bond vibration, the degree of polymerization depending on the irradiation time is determined. In the Raman spectra, a peak at ∼1635 cm⁻¹ appears during polymerization, which corresponds to the C=C double bond. The formation of conjugated double bonds in these systems is observed for the first time. During polymerization, methylene chains of molecules retain trans-configuration; the structural ordering of molecules in the film is observed.     

Intermolecular coupling in nanometric domains of light-harvesting dendrimer films studied by photoluminescence near-field scanning optical microscopy (PL NSOM)

Near-field scanning optical microscopy (NSOM) has been used to investigate the photophysical characteristics of first- to fourth-generation (G1 to G4) light-harvesting dendrimer thin films containing coumarin-343 and coumarin-2 as the core and peripheral chromophores, respectively. Thin film photoluminescence (PL) spectra exhibit a significant red shift in the lower generations (G1, G2, and G3) as compared to their respective solution PL spectra, implying the formation of excimers. Spatially resolved PL NSOM images exhibit pronounced nanoscopic domains in G1, which become more homogeneous in higher generations due to site-isolation of the core chromophore. G4 exhibits complete site-isolation for these light-harvesting dendrimer films.     

Time-resolved and steady-state fluorescence studies of excited-state proton-transfer reactions of proflavine

Time-resolved and steady-state fluorescence studies of proflavine in aqueous solution are presented. The observation of a monoexponential fluorescence decay with a time constant decreasing with increasing pH and the presence of an anomalous red-shift in the fluorescence spectrum as a function of pH indicate the existence of a complex proton-transfer mechanism in the excited state. A reaction scheme is proposed and the corresponding proton-transfer rates are evaluated. An excited-state pK value of 12.85 is obtained for the equilibrium between the cationic form of proflavine and the same form dissociated at an amino group.     

In-plane orientation controlled by a rotating disc in Langmuir and Langmuir-Blodgett films of a merocyanine dye

When a Langmuir film consists of mesoscopic domains having an elongated shape, stretching of the film due to Langmuir-Blodgett (LB) deposition and shearing due to a rotating disc can induce in-plane orientations of these domains. When the former governs the phenomenon, the domains are aligned perpendicular to the substrate surface (just before the transfer). When the latter governs the phenomenon, the domains are aligned along the concentric flow lines. We have studied the more complicated intermediate case by using two different molecular systems. It has been demonstrated that in LB films fabricated under such conditions, the orientation of the domains depends on the position on the substrate and the deposition type. Furthermore, monolayers deposited during the upward and downward strokes of the substrate become non-equivalent.     

Langmuir-Blodgett monolayers of long-chain NBD derivatives on silver island films: Well-organized probe layer for the metal-enhanced fluorescence studies

The metal-enhanced fluorescence (MEF) from the well-organized monolayers of two newly prepared long-chain alkylamine derivatives of nitrobenzoxadiazole (NBD-C16 and NBD-C18) deposited on silver island films (SIFs) has been investigated. The NBD derivatives were conveniently prepared by using a single step procedure in quantitative yields. The monolayers of the probes on SIFs as well as on bare-glass slides were obtained by using the Langmuir-Blodgett (LB) technique. Orientation of the NBD probe molecule in LB monolayer film was measured with polarized absorption spectroscopy. The observed tilt angle of the probe transition dipole moment with respect to the surface normal of approximately 67-68 degrees was evaluated. We observed that the NBD monolayers deposited in close proximity to silver islands show about a 16-fold increase in fluorescence intensity and shortened fluorescence lifetime compared to those on bare-glass, which are due to metal enhanced fluorescence. On the other hand, the corresponding MEF from randomly oriented film obtained by using spin coating of the probes on SIFs was only 2.5-fold. Further, we deposited mixed monolayers of NBD-C16 or NBD-C18 with various molar ratios of stearic acid to understand the polarity effect on MEF. Interestingly, we found a consistent increase in MEF efficiency with increasing molar ratio of stearic acid. Along with MEF, we also found a continuous blue-shift in emission band maxima of the probes with an increasing molar ratio of stearic acid. The observed increase in MEF efficiency is justified based on cooperative effects of (1) the modulations in electronic density of the surface plasmon absorption band of SIFs and (2) defined probe orientation that might lead to preferential excitation.     

Sum frequency generation vibrational spectroscopic and high-pressure scanning tunneling microscopic studies of benzene hydrogenation on Pt(111)

Sum frequency generation (SFG) vibrational spectroscopy and high-pressure scanning tunneling microscopy (HP-STM) have been used in combination for the first time to study a catalytic reaction. These techniques have been able to identify surface intermediates in situ during benzene hydrogenation on a Pt(111) single-crystal surface at Torr pressures. In a background of 10 Torr of benzene, STM is able to image small ordered regions corresponding to the c(2 radical3 x 3)rect structure in which each molecule is chemisorbed at a bridge site. In addition, individual benzene molecules are also observed between the ordered regions. These individual molecules are assumed to be physisorbed benzene on the basis of the SFG results showing both chemisorbed and physisorbed molecules. The surface becomes too mobile to image upon addition of hydrogen but is determined to have physisorbed and chemisorbed benzene present by SFG. It was spectroscopically determined that heating the platinum surface after poisoning with CO displaces benzene molecules. The high-coverage pure CO structure of (radical19 x radical19)R23.4 degrees imaged with STM is a verification of spectroscopic measurements.