An optimized method for the synthesis of amino-functionalized phosphatidylcholine

Phosphatidylcholine analogues were synthesised as affinity ligands for the capture of membrane proteins. Several protecting group strategies were investigated to synthesize the amino-functionalized phosphatidylcholine: 11-aminoundecyl 2-(trimethylammonio)ethyl phosphate (4). The acid-mediated deprotection of the Boc group generated a mixture of the target products which could only be purified by HPLC. However, an alternative strategy, using the hydrazine-labile phthalimide group route, followed by a gel filtration step proved straightforward to afford the desired amino-functionalized phosphatidylcholine product in high yield and purity.     

Solid-phase synthesis of amidines by the reduction of amidoximes

Amidines can be prepared on a solid support by reducing polymer-bound amidoximes with SnCl₂·2H₂O. The method has proved to be straightforward and highly efficient. Amidoximes attached to the solid support are readily available by treating resin-bound nitriles with hydroxylamine.     

1,8-二羟基-9,10-二氢蒽的合成

以1,8-二羟基蒽醌为原料,经甲醚化,锌粉和金属钠还原,去甲基等4步反应合成1,8-二羟基-9,10-二氢蒽,总产率为37.1,8-二甲氧基蒽醌用NaBH₄/CF₃COOH还原生成二聚产物,并测定了其单晶结构.     

An expedient reductive method for conversion of ketoximes to the corresponding carbonyl compounds

A wide array of readily prepared pivalates of ketoximes can be converted to the corresponding ketones in good yields by treatment with iron powder in THF containing catalytic amounts of both trimethylsilyl chloride and glacial acetic acid at room temperature for 30 min, followed by a brief aqueous workup.     

The use of the DPE radical polymerization method for the synthesis of chromophore-labelled polymers and block copolymers

Two analogues of diphenylethene carrying phenanthrene (1-(9-phenanthryl)-1-phenylethene (PPE)) and anthracene (1-(2-anthryl)-1-phenylethene (APE)) units were used in radical polymerization of styrene (St) and methyl methacrylate (MMA) at 80 °C using AIBN as initiator. Because of the nature of the polymerization, the resulting polymers possess the corresponding chromophoric groups. Using the methodology of a DPE system, these labelled polymers were further used for the synthesis of block copolymers. In this way poly(methyl methacrylate)-b-poly(styrene) and poly(methyl methacrylate)-b-poly(acrylonitrile) with molar masses of 60,000-90,000 g/mol were synthesized. Incorporation of the chromophoric groups into both homo- and block copolymers was confirmed by spectral measurements.     

Size-controlled synthesis of SnO2 nanoparticles using reverse microemulsion method

Tin oxide nanoparticles were prepared using an ionic surfactant (sodium dodecyl sulfate) and tin (IV) chloride as an inorganic precursor via the reverse microemulsion method. The size of the nanoparticles is controlled by variation of water-to-surfactant ratio. Eliminating of surfactant in prepared nanoparticles was confirmed by the infrared spectroscopy after sequential calcinations. Transmission electron microscopy, surface area, pore volume, average pore diameter, pore size distribution and X-ray diffraction results were used for evaluation of size distribution, shape and structure of prepared SnO₂ nanoparticles. Transmission electron micrographs confirmed that the obtained materials are spherical nanoparticles. The X-ray diffraction results show the crystalline phases of all samples are SnO₂ with tetragonal structured crystal. In addition, the X-ray diffraction and transmission electron microscopy data showed that the size of SnO₂ nanoparticles decreased with decreasing the water-to-surfactant ratio.     

An optimized method for the isolation and identification of membrane proteins

The purpose of this study was to develop a protocol suitable for membrane protein extraction from limited starting material and to identify appropriate conditions for two-dimensional (2-D) gel electrophoresis. We used A549 cells, a human alveolar type II cell line, and evaluated three protein extraction methods based on different separation principles, namely protein solubility, detergent-based and density-based organelle separation. Detergent-based extraction achieved the highest yield with 14.64% +/- 2.35 membrane proteins but sequential extraction with 7.35% +/- 0.78 yield and centrifugal extraction with 4.1% +/- 0.54 yield produced the purest fractionation of membrane proteins. Only the sequential and the detergent-based extraction proved suitable for small volumes of starting material. We identified annexin I + II, electron transfer flavoprotein beta-chain, H(+)-transporting ATP synthase, mitofilin and protein disulfide isomerase A3 as membrane and cytokeratin 8 + 18, actin and others as soluble proteins using matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis and started to map the A549 cell proteome. Our data suggest that membrane proteins can be extracted efficiently from small samples using a simple sequential protein extraction method. They can be separated and identified successfully using optimized conditions in 2-D gel electrophoresis. The presented methods will be useful for further investigations of membrane proteins of alveolar and bronchial carcinomas.     

An Improved Method for the Preparation of 4,5-Diaminochrysazin

4,5-Diaminochrysazin was prepared from chrysazin by ethylation and nitration followed by reaction with hydroiodic acid (HI). Treatment of 1,8-diethoxy-4,5-dinitroanthraquinone with HI resulted not only in O-deethylation, but also in reduction of nitro groups with more than 95% yield. This is a unique finding and is reported for the first time with a definite improvement over literature methods and is suitable for scale-up.     

An efficient method for the synthesis of 1-chlorophenazines based on the selective cathodic reduction of 3,3,6,6-tetrachloro-1,2-cyclohexanedione

An efficient method for the synthesis of 1-chlorophenazines has been established. It is based on the use of 3,6,6-trichloro-2-hydroxy-2-cyclohexen-1-one 4 as a synthetic equivalent of 3-chloro-1,2-benzoquinone 3. The intermediate 4 was prepared in near quantitative yield by electroreductive monodechlorination of 3,3,6,6-tetrachloro-1,2-cyclohexanedione 1, which is an inexpensive and easily available starting material. Efficient reactions of 4 with primary 1,2-phenylenediamines provided the corresponding 1,1,4-trichloro-1,2,3,4-tetrahydrophenazines 6, which were directly aromatized by treatment with 2,6-lutidine to give the title compounds in high yields. X-ray crystallographic structures for 1,1,4-trichloro-1,2,3,4-tetrahydro-6-methylphenazine 6f, 8-benzoyl-1,1,4-trichloro-1,2,3,4-tetrahydro-phenazine 6ea, and 1,7-dichlorophenazine 10db have been determined.     

A simple and convenient method for the preparation of diborane from tetrabutylammonium borohydride and benzyl chloride for application in organic synthesis

Diborane is readily generated in situ at 25 °C in toluene using the Bu₄NBH₄/PhCH₂Cl and Bu₄NBH₄/I₂ reagent systems. The reagent prepared in this way is used for the reduction of carbonyl compounds and hydroboration-oxidation of olefins to obtain the corresponding alcohols in good yields.     

An efficient method for the synthesis of lignans

An efficient approach for the synthesis of several types of lignans (dibenzylbutanediols, dibenzylbutanes, substituted tetrahydrofurans, aryldihydronaphthalenes, arylnaphthalenes, and aryltetralins) was developed. The regioselective oxidative coupling of ethyl ferulate was used as the key step.     

An efficient method for the synthesis of gem-difluoroolefins

A series of gem-difluoroolefin derivatives were synthesized in moderate to good yields by the reaction of α,α-difluoro-β-carbonyl benzothiazol-2-yl sulfones (DFBTs) with various carbon nucleophiles. Using dl-proline as organocatalyst, the reaction of DFBT with acetone gave a tertiary alcohol, which could be further converted to the corresponding difluoroolefin by LDA.     

An efficient method for the synthesis of nitropiperidones

A three step efficient strategy for the synthesis of substituted 5-nitropiperidones in high de, employing Michael addition of N-p-tolylsulfinyl beta-nitroamines to alpha,beta-unsaturated esters, hydrolysis of the sulfinyl group, and cyclization of the resulting free amines, has been developed. A very simple experimental procedure involving mild conditions and only one chromatographic purification are the main features of the process.     

An efficient method for the synthesis of tricycloquinazoline

Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, p. 2457, October, 1990.     

An optimized electrochemistry-liquid chromatography-mass spectrometry method for studying guanosine oxidation

Oxidative stress can disrupt the integrity of genetic material. Due to its importance in the pathogenesis of different kinds of disease, including neurodegenerative disease, cardiovascular disease and cancer, major efforts are put into the elucidation of mechanisms involved. Herein, the combination of electrochemistry/liquid chromatography/mass spectrometry (EC/LC/MS) is presented as convenient, fast and simple method to study nucleic acids oxidation. Guanosine was selected as test compound. 8-Hydroxyguanosine and (guanosine-H)(2) were identified as primary oxidation products. Oxidation was accomplished in an electrochemical thin-layer cell integrated in the flow path of the autosampler of the chromatographic system. The reaction mixture was separated and mass analyzed by LC/MS. The use of LC was found to be particularly beneficial to resolve isobaric oxidation products. Another advantage of the setup used was the ability to decouple the electrochemical cell and the electrospray ionization source from each other eliminating any kind of cell potential interaction. Separation of EC from LC/MS, furthermore, facilitates method optimization. Experimental parameters were optimized for both techniques independently. Highest yields and best detectability of oxidation products were obtained with 10 mM ammonium formate at physiological pH delivered at a flow rate of 2.5-5 μL/min through the electrochemical cell.     

An optimized divergent synthesis of sulfonimide-based dendrimers achieving the fifth generation

Abstract

A novel two-step amine persulfonylation method described here results in significantly higher yields of sulfonimide-based dendrimers as compared with formerly available procedures. This allowed the preparation of the fifth-generation sulfonimide-based dendrimer for the first time, on a 2?g scale. Dendrimers of fourth and fifth generations decorated with naphthyl groups after being spin-coated on a glass substrate were shown to form stable hydrophobic films as revealed by contact angle measurements.     

纳米氧化锡在锌-硝基苯电池反应中的电催化

以氯化锡为原料,四丙基溴化铵为表面活性剂水热法制备纳米二氧化锡（SnO₂）催化剂,并以钛网为基材,制备催化电极. 应用SEM,XRD等手段对催化剂进行表征. 考察了反应物浓度、反应温度和反应时间对催化剂形貌的影响. 研究了纳米SnO₂催化剂对锌还原硝基苯原电池反应的电催化性能. 结果表明,当 NaOH浓度为0. 5 mol•L^-1、水热反应温度160 ℃、水热反应时间15 h时,得到的SnO₂催化剂是由纳米片构成的刺球状颗粒,粒径最小,约17 nm. 与平板铂电极相比,制备的催化电极对硝基苯电还原具有更高的催化活性,硝基苯转化率为74%,最大放电功率为21.9 mW•cm^-2,远大于平板铂电极. 硝基苯的主要还原产物为苯胺、对乙氧基苯胺和对氯苯胺.     

An effective method for the synthesis of monoferrocenylbenzene derivatives

Three new ferrocenylbenzene derivatives, 1-ferrocenyl-2,3,4,5-tetramethylbenzene (1), 1-ferrocenyl-2,4-diphenylbenzene (2), and 1-ferrocenyl-2,4-ditrimethylsilylbenzene (3), were synthesized by cycloaddition of ferrocenylacetylene cobalt cluster with different alkynes and characterized by elemental analysis, FT-IR, NMR, and MS. The molecular structures of 2 and 3 were identified by single-crystal X-ray diffraction. The oxidation potentials of ferrocenyl unit in these compounds were investigated by cyclic voltammetry and theoretical calculations. The results indicated that the electron-donating or electron-withdrawing effect of substituents on the central phenyl was the key factor that influenced the oxidation potential of the ferrocenyl unit.