Molecular Model Design and Quantum Chemistry Calculation of Cluster B4N4

The B4N4 configurations were designed by using the molecular figure software. The full geometry optimization and harmonic vibration frequency analysis were performed at the 6-31G(d) level using density functional theory B3LYP method,which indicates that the five isomers are stationary points on the potential energy surface of B4N4 molecules. The geometry structure,frontier molecular orbital (FMO) and mulliken population have been analyzed. The bonding properties and hybrid type were also discussed in detail,showing the addition of hydrogen atoms to boron or nitrogen atom would increase the stabilities of the BN clusters.     

Theoretical Study on the Catalytic Activity and Sulfur Resistibility of Amorphous Alloy Ni-B-P

In the present paper,one hundred cluster models NinBP (n=1～6) have been designed and studied by density functional theory (DFT) to get an insight into the local structure,catalytic properties and sulfur resistibility of amorphous alloy Ni-B-P. The configurations in triplet state are found more stable than those in the singlet state. It is found that as the content of Ni in the clusters increases,the value of Fermi level in clusters fluctuated,which shows that the content of Ni can influence the Fermi level to a certain extent. Based on the Fermi level and DOS,we consider the activity of catalyst in hydrogenation reaction is the best in cluster Ni3BP. On the basis of the charge of clusters NinBP (n=1～6),we conclude the amorphous alloy Ni-B-P with high Ni content has better sulfur resistibility and the best hydrogenation activity,strong sulfur resistibility appears in clusters Ni3BP,and the amorphous alloy Ni60B20P20 with similar proportion is expected to prepare in the future.     

H2在非晶态合金Ni40Fe40P20表面的吸附行为

With the level of B3LYP/Lanl2dz of density functional theory and advisable adsorption models designed, the adsorption properties of the most stable cluster of Ni₂Fe₂P were calculated, and four stable configurations with the adsorption of hydrogen were gained. The geometries and HOMO contributions of 3d orbital of metal atoms and energy level properties of adsorption configurations were concerned and their Infrared Spectrum were simulated and predicted. The bond lengths and bond orders and vibration frequencies concerned synthetically, the adsorption mechanisms of hydrogen molecular on amorphous alloys Ni₄₀Fe₄₀P₂₀ surfaces were discussed in the microcosmic aspect. The hydrogen molecules adsorbing on the clusters were dissociated. In the clusters′ Infrared Spectrums of hydrogen adsorption, there were the vibration peaks with the frequency less than 500 cm^-1 caused by metal atoms and other vibration peaks with the frequency more than 500 cm^-1 caused by hydrogen atoms. Compared with the energy level DOS of the clusters before and after adsorption, it was found, that the new adsorption activity sites generated after the adsorption of hydrogen, as well as easy way for metal atoms providing electrons and participating subsequence reactions were gained.     

PROPERTIES OF POLYMER SUPPORTED Ni-Cu BIMETALLIC CATALYSTS PREPARED BY SOLVATED METAL ATOM IMPREGNATION

D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impreg-nation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectro-scopy (XPS). The Ni particles on the catalysts are very highly dispersed and displaysuperparamagnetic behaviour. Ni-Cu alloy clusters were found to be formed. The sur-face compositions are different from the bulk concentrations. In contrast with the surfaceenrichment in copper generally observed on conventional Ni-Cu catalysts, the surfaces ofthese catalysts are enriched in nickel. The nickel is in both zero and valent states, whilecopper is mainly in metallic state. Catalytic data show that the formation of Ni-Cu alloyclusters has a profound effect on the catalytic activities of the catalysts in the hydrogena-tion of furfural. The activity of the Ni:Cu ratio of one bimetallic catalysts is much higherthan that of the Ni or Cu monometallic catalyst.     

Fe@C60几何结构和电子性质的计算研究

The generalized gradient approximation （GGA） based on density functional theory （DFT） was used to analyze the structural and electronic properties of Fe@C60 and C59Fe for comparison. Among the six possible optimized geometries of Fe@C60, the most favorable endohedral site of Fe atom is under the center of a hexagon ring, i.e., Fe@C60-6. The Energy gap （Eg） of Fe@C60-6 is smaller than those of C59Fe and C60, indicating the higher chemical reactivity. The magnetic moment of Fe atom in Fe@C60-6 is preserved to some extent though there is the hybridization between the ge atom and C atoms of the cage, in contrast to the completely quenched magnetic moment of the Fe atom in C59Fe.     

Probing Diverse Disulfur Ligands in the Mo_2S_n~(–/0)(n = 4 ～ 8) Clusters: Structural Evolution and Chemical Bonding

Density functional theory(DFT) and coupled cluster theory(CCSD(T)) calculations were employed to investigate the geometric and electronic structures of a range of dinuclear molybdenum sulfide clusters, Mo_2S_n~– and Mo_2S_n(n = 4～8). The results showed that the sulfur atoms tended to occupy the terminal sites of the clusters continuously in the process of sequential sulfidation. After the oxidation state of Mo atoms reached the maximum of +6, diverse disulfur ligands emerged in the sulfur-rich Mo_2S_n~(–/0)(n = 7, 8) clusters. The driving forces of removing a sulfur atom from different S ligands in Mo_2S_n~(–/0)(n = 4～8) clusters, especially from those disulfur units, were evaluated. The corresponding order may provide insight into the pretreatment of fresh MoS_2 catalysts. Vertical detachment energies(VDEs) were predicted according to the Generalized Koopmans' theorem, and then the photoelectron spectra(PES) were simulated. Molecular orbital and spin density values were analyzed to elucidate the chemical bonding and the evolutionary behavior in the dinuclear molybdenum sulfide clusters.     

New Rare Earth（Ⅲ） Complexes with H2tmtaa

A series of Ln(tmtaa)(Htmtaa)·CH_2Cl_2(Ln=Sm,Tb,Er and Yb)complexes were prepared and characterized byinfrared spectra,mass spectra and molecular electronic spectroscopy as well as DSC measurement.A sandwichstructure containing all the eight nitrogen atoms of tmtaa and Htmtaa was proposed for these complexes.X-rayphotoelectron spectra(XPS)of these complexes revealed that four nitrogen atoms of both tmtaa and Htmtaa werechemically equivalent to each other,respectively.The acidic hydrogen of Htmtaa did not bind specifically to any ni-trogen atom of Htmtaa,but was shared by all the four nitrogen atoms.The magnetic properties of these complexeswere found to be in good agreement with their theoretical values.     

Synthesis, Thermal, Electrical and Catalytic Studies of Some Transition Metal Polychelates of Bis-bidentate Schiff Base

Polychelates of Mn（Ⅱ）, Fe（Ⅱ）, Co（Ⅱ）, Ni（Ⅱ）, Cu（Ⅱ）, Zn（Ⅱ） and Cd（Ⅱ） with the bis salen-type ligand derived from 4,4＇-bis[（salicylaldehyde-5）azo]biphenyl and 1,4-diaminobutane have been synthesized. All the polychelalls have been characllrized by elemental analysis, magnetic susceptibility measurements, IR, electronic spectra and thennogravirncuic studies. All the complexes isolated in solid stall are dark coloured and insoluble in water and common organic solvents. The ligand behaves as a bis-bidentall molecule coordinating through the phenolic oxygen and azomethine nitrogen atoms. The thermal decomposition of these metal complexes was investigated by thermogravimetric analysis and data have been analyzed for kinetic parameters using Broido equation. The solid-state electrical conductivity of the ligand and its polychelalls in the form of compressed pellet was studied in the temperaturc range from 313 to 413 K All the polychelalls were found to show semiconducting nature. The Mn（Ⅱ）, Fe（Ⅱ）, Co（Ⅱ） and Ni（Ⅱ） polychelalls have been assessed for the catalytic epoxidation of styrene.     

STUDIES ON THE RELATIONSHIP BETWEEN THE TR SPECTRA AND THE STRUCTURE OF SOME LINEAR Mo-Fe-S CLUSTERS

<正> The IR spectra of seven linear Mo-Fe-S clusters have been investigated. The characteristic frequencies VMo-st, VMo-sb, VFe-sb, VFe-spb and VFe-cl were assigned by comparing their vibratiional frequencies with the structural parameters and oxidation states of the metals in these clusters. The assignment of δS-Mo-S was attempted to approach. The influence ofMo atom on Vre-sb in the clusters containing heteronuclear MoS2Fe unit hasbeen discussed. The internal relationship and regularity between the characteristic frequencies and some structural parameters were demonstrated. Final a valuable parameter ΔV, which may be taken as a qualitative estimate of the extent of .Fe →Mo charge transfer in Mo-Fe-S clusters, was proposed.     

Effect of La on Partial Oxidation of Ethanol to Hydrogen over Ni／Fe Catalysts

The partial oxidation of ethanol to hydrogen was investigated over Ni/Fe/La catalysts prepared by the co-precipitantion method.the effects of introduction of La promoter and the reaction temperature on the catalytic performance were studied.It was found that the introduction of La into Ni/Fe catalysts is helpful to increase the selectivity to hydrogen and the stability of the catalysts.The results of XRD and XPS characteri-zation show that the structure of the catalyst was changed during the reaction.The existence of LaFeO3 species is possibly the main reason of the increase of the catalyst stability.     

Geometrical structures,electronic states,and stability of NinAl clusters

Density‐functional with generalized gradient approximation (GGA) for the exchange‐correlation potential has been used to calculate the energetically global‐minimum geometries and electronic states of Ni_nAl (n = 2–8) neutral clusters. Our calculations predict the existence of a number of previously unknown isomers. All structures may be derived from a substitution of a Ni atom at marginal positions by an Al atom in the Ni_n+1 cluster. Aluminum atom remains on the surface of the geometrical configurations. Moreover, these species prefer to adopt three‐dimensional (3D) spacial forms at the smaller number of nickel atoms compared with the pure Ni_n+1 (n ≥ 3) configuration. Atomization energies per atom for Ni_nAl (n = 2–8) have the same trend as the binding energies per atom for Ni_n (n = 3–9). The stabilization energies reveal that Ni₅Al is the relatively most stable in this series. In comparison with the magnetic moment of pure metal nickel (0.6 μ_B), the average magnetic moment of Ni atom increases in Ni Al clusters except the Ni₃Al. Moreover, except the case of Ni₅Al, Ni average magnetic moment decreases when alloyed with Al atoms than that in pure Ni clusters, which originate the effective charge transferring from Al to Ni atoms. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

基于密度泛函理论分析团簇ConMoS(n=1~5)电子性质、光学性质及磁性

为了从理论层面深入探究团簇 Co_nMoS(n=1~5)的电子性质、光学性质及磁性,弄清其内在关联,依据拓扑学原理和密度泛函理论,在B3LYP/def2-TZVP量子化学水平和多个自旋多重度下对该团簇进行结构优化并分析。结果表明：团簇ConMoS共有21种稳定构型;通过对NPA(自然布居分析,natural population analysis)电荷、静电势、亲电指数、电离势、光学电负性和折射率等分析得出,金属原子有高概率失去电子,非金属原子相对更容易得到电子,团簇Co₅MoS中的构型5a在最稳定构型中有高的得失电子能力、反应活性和折射率,Co和Mo原子易发生亲核反应,S原子易发生亲电反应;对该团簇自旋布居数、原子磁矩、轨道磁矩和态密度分析发现,该团簇磁性主要由Co原子的d轨道提供,且团簇Co₃MoS表现出了比其它尺寸团簇更为稳定和优异的磁性。最终得出团簇Co₃MoS在磁性方面有较好的表现且构型5a在活性和光学领域有一定的潜力。     

基于密度泛函理论分析团簇ConMoS(n=1~5)电子性质、光学性质及磁性

为了从理论层面深入探究团簇Co_nMoS （n=1~5）的电子性质、光学性质及磁性,弄清其内在关联,依据拓扑学原理和密度泛函理论,在B3LYP/def2-TZVP量子化学水平和多个自旋多重度下对该团簇进行结构优化并分析。结果表明：团簇Co_nMoS共有21种稳定构型;通过对NPA （自然布居分析,natural population analysis）电荷、静电势、亲电指数、电离势、光学电负性和折射率等分析得出,金属原子有高概率失去电子,非金属原子相对更容易得到电子,团簇Co₅MoS中的构型5a在最稳定构型中有高的得失电子能力、反应活性和折射率,Co和Mo原子易发生亲核反应,S原子易发生亲电反应;对该团簇自旋布居数、原子磁矩、轨道磁矩和态密度分析发现,该团簇磁性主要由Co原子的d轨道提供,且团簇Co₃MoS表现出了比其它尺寸团簇更为稳定和优异的磁性。最终得出团簇Co₃MoS在磁性方面有较好的表现且构型5a在活性和光学领域有一定的潜力。     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

NiFe2O4@SiO2@Cu3(BTC)2 nanocomposite as a magnetic metal–organic framework

A new magnetic metal–organic framework (MOF), namely, NiFe₂O₄@SiO₂@Cu₃(BTC)₂, was synthesized via an in situ method using Fe(NO₃)₃, Ni(NO₃)₂, CuN₂O₆, TEOS, (3-aminopropyl)triethoxysilane, and benzene-1,3,5-tricarboxylic acid. Three different samples were fabricated according to a formula; xNiFe₂O₄@(100 − x)SiO₂@Cu₃(BTC)₂, where x = 10, 30, and 50. The integration of the intrinsic characteristic of Cu₃(BTC)₂ as an MOF with strong magnetic properties of NiFe₂O₄ could lead to an exquisite material with specific behaviors. X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), diffuse reflectance spectroscopy (DRS), photoluminescence (PL), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and simulated thermal analyzer (STA) were utilized to characterize the mentioned samples. Results approved that the synthesized compounds were composed of SiO₂ and Cu-MOF and NiFe₂O₄ crystalline phases with rod-like morphology. The similarity between the morphology of the synthesized samples and Cu-MOF approved that an appropriate fabrication method has been selected. This fact led to observe mesoporous composites with 38–90 m² g⁻¹ specific surface area. PL spectroscopy confirmed the near bandgap emission, ligand-to-metal charge transfer, and metal-to-ligand charge transfer. Although all the samples had magnetic hysteresis, the highest magnetization was seen in the 50NiFe₂O₄@SiO₂@Cu₃(BTC)₂ sample. This composite compound with a magnetization value of 2 emu g⁻¹ at 8000 Oe and a specific surface area of 90 m² g⁻¹ could be classified as a magnetic MOF (MMOF). STA results suggested that 400°C is the highest operating temperature for this compound.     

过渡金属铁配合物Fe(CO)_(5-x)(PR_3)_x的结构与性质的理论研究

采用密度泛函理论(DFT)对一系列低价铁化合物Fe(CO)_(5-x)(PR_3)_x(x=1~3,R=H,F,Me)的几何结构、电子结构、成键特点以及热力学性质进行了理论研究。结果表明引入膦配体后不会造成Fe(CO)x(PR_3)_(5-x)的几何结构畸变,为略扭曲的三角双锥形。自然键轨道(NBO)分析显示,膦配体与羰基铁基团间存在电荷转移,有效增强Fe-CO之间的共价作用。多数稳定结构Fe(CO)x(PR_3)_(5-x)的第一膦配体解离能要比第一羰基解离能低,预示Fe(CO)_(5-x)(PR_3)_x的反应活性比Fe(CO)5有明显提高。     

Preparation,Crystallographic, Spectroscopic and Magnetic Characterization of Low‐Valency Nitridometalates Li2[(Li1‐xMx)N] with M = Cu,Ni

Thermogravimetric and difference thermal analyses show that the reactions of lithium nitride with the transition metals Cu and Ni under molecular nitrogen to form phases Li₂[(Li_1‐xM^I_x)N] take place above 673 K. The maximum weight gains are reached at 926 K and 968 K for M = Cu and Ni, respectively. At higher temperatures, the ternary phases Li₂[(Li_1‐xM^I_x)N] decompose, limiting the substitutional level x. In the temperature range of 773 K — 873 K, the successful synthesis of Li₂[(Li_1‐xNi^I_x)N] (0 < x ≤ 0.85(1)) single phase products is demonstrated. Maximum substitution obtained for the Cu phases is x_max= 0.43(1). The dependence of the lattice parameters of the hexagonal unit cell on x is almost linear. The magnetic moment of M strongly depends on x. At low x the magnetic moments in phases with M = Ni are presumably enhanced by orbital effects. A decrease of μ_eff with x to μ_eff(x = 1) → 0 is explained by delocalization of the magnetic moments and by the gradual formation of a metal for the hypothetical compound Li₂[NiN] (x = 1). XAS spectroscopy at the transition metal K‐edges shows that Cu and Ni principally correspond to d¹⁰‐ and d⁹‐configurations, respectively.     

Quantum Chemical Study on Geometry and Property of Cluster Ni_4P

1INTRODUCTION Amorphous alloys attractive to scientists have worked in the field of materials and catalysts since they have many excellent physical and chemical pro-perties,such as high magnetic susceptibility,high specific heat,high strength,ductile in compression,low coefficient of friction,high corrosion resistance,super plasticity within the range,ferromagnetism and super conductivity[1~5].Especially,amorphous alloys as catalytic materials have shown either hig-her activity or selectiv…