Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.     

Interaction of polymer and surfactant at the air-water interface: poly(2-(dimethylamino)ethyl methacrylate) and sodium dodecyl sulfate

The interactions between the weak polyelectrolyte, poly(2-(dimethylamino) ethyl methacrylate) or PDMAEMA, and the anionic surfactant sodium dodecyl sulfate (SDS) at the air-water interface have been investigated at pH = 3 and 9 using a combination of neutron reflectivity and surface tension measurements. By using deuterated PDMAEMA in combination with h-SDS and d-SDS, we have been able to directly determine the distribution of both the polymer and the surfactant at the air-water interface. At pH = 3, the polyelectrolyte is positively charged while at pH = 9 it is essentially uncharged. The enhancement in the adsorption of SDS at low coverage suggests that surface active polymer surfactant complexes are forming and adsorbing at the interface. This leads to close to monolayer adsorption of SDS, suggesting that it is surfactant monomers that are complexing with polymers that are in extended conformations parallel to the surface. As the concentration of SDS in the mixtures changes so does the surfactant content of the complexes, which affects the surface activity and hence the coverage of the complexes. Multilayer structures are formed at SDS concentrations of 0.1 and 1 mM, for pH = 3 and 9, respectively.     

Interactions of poly(amidoamine) dendrimers with the surfactants SDS, DTAB, and C12EO6: an equilibrium and structural study using a SDS selective electrode, isothermal titration calorimetry, and small angle neutron scattering

Interactions in aqueous solutions of different generations of poly(amidoamine) (PAMAM) dendrimers containing amine, hydroxyl, or delta-glucolactone functional groups at the periphery with the anionic surfactant sodium dodecyl sulfate (SDS) were investigated. We used a SDS-specific electrode (EMF) for SDS monomer concentration monitoring, isothermal titration calorimetry (ITC) for binding information, and small angle neutron scattering (SANS) for structural studies. ITC experiments monitoring the interaction of the dendrimers with cationic dodecyltrimethylammonium bromide (DTAB) and nonionic hexaethylene glycol mono-n-dodecyl ether (C12EO6) showed no significant binding effects. In contrast, SDS binds to all of the above dendrimers. EMF and ITC data demonstrated a regular trend for both the onset of binding and binding saturation as the generation in each family of dendrimers increased. In addition, generation G6 exhibited a noncooperative binding process at very low SDS concentrations. Furthermore, the onset of cooperative binding in the EMF experiments started at lower concentrations as the weight % (w/v), the size, and the numbers of the internal or surface groups increased. On the other hand, the binding capacity of the dendrimers showed only a small dependence on the above parameters. At SDS concentrations approaching the binding limit and also at selective concentrations within the binding range, SANS measurements indicated that in all cases the bound surfactant is in the micellar form. From the electromotive force (EMF) measurements, ITC data, and SANS data, the stoichiometry of the supramolecular complexes was determined.     

Phase behavior of cationic hydroxyethyl cellulose-sodium dodecyl sulfate mixtures: effects of molecular weight and ethylene oxide side chain length of polymers

Novel cationic hydroxyethyl cellulose (HEC) polymers with different molecular weights (1.1 x 10(5) to 1.7 x 10(6) g/mol) and ethylene oxide (EO) side chain lengths (1.5-2.9 EO units) were mixed with sodium dodecyl sulfate (SDS) in aqueous solutions. The phase diagrams of cationic HEC-SDS complexes were determined in the dilute polymer concentration regime (< 0.5 wt %) with gradual addition of SDS molecules. The viscosity and structures of the complexes during the phase evolution were studied using rheometry and dynamic light scattering. The gradual addition of SDS first induced interchain associations with the bound SDS aggregates serving as cross-linkers to form an open network structure, producing a very broad size distribution and high viscosities of the complex solutions, and then condensed the network and induced a structure reorganization, resulting in globular aggregates with narrow size distributions. The growth of these globular aggregates in size eventually led to macroscopic sedimentation near charge neutralization. Further addition of SDS randomly broke the sedimentary aggregates into small particles and SDS micelles with low solution viscosities. The effects of molecular weight and EO side chain length of polymers on the phase boundary, viscosity, and structure of cationic HEC-SDS complexes were discussed.     

Synergistic effect of Ni(II) and Co(II) ions on the sulfite induced autoxidation of Cu(II)/tetraglycine complex

The synergistic effect of Ni(II) and Co(II) on the sulfite induced autoxidation of Cu(II)/tetraglycine was investigated spectrophotometrically at 25.0 degrees C, pH = 9.0, 1 x 10(-5) mol dm(-3) < or = [S(IV)] < or = 8 x 10(-5) mol dm(-3), [Cu(II)]= 1 x 10(-3) mol dm(-3), 1 x 10(-6) mol dm(-3) < or = [Ni(II)] or [Co(II)] < or = 1 x 10(-4) mol dm(-3), [O2] approximately 2.5 x 10(-4) mol dm(-3), and 0.1 mol dm(-3) ionic strength. In the absence of added nickel(II) or cobalt(II), the kinetic traces of Cu(III)G4 formation show a large induction period (about 3 h). The addition of trace amounts of Ni(II) or Co(II) increases the reaction rate significantly and the induction period drastically decreases (less than 0.5 s). The effectiveness of Cu(III)G4 formation becomes much higher. The metal ion in the trivalent oxidation state rapidly oxidizes SO3(2-) to SO3*-, which reacts with oxygen to produce SO5*-. The strongly generated oxidants oxidize Cu(II)G4 to Cu(III).     

Effect of added poly(oxyethylene)dodecyl ether on the phase and rheological behavior of wormlike micelles in aqueous SDS solutions

Upon the addition of a short EO chain nonionic surfactant, poly(oxyethylene) dodecyl ether (C12EOn), to dilute micellar solution of sodium dodecyl sulfate (SDS) above a particular concentration, a sharp increase in viscosity occurs and a highly viscoelastic micellar solution is formed. The oscillatory-shear rheological behavior of the viscoselastic solutions can be described by the Maxwell model at low shear frequency and combined Maxwell-Rouse model at high shear frequency. This property is typical of wormlike micelles entangled to form a transient network. It is found that when C12EO4 in the mixed system is replaced by C12EO3 the micellar growth occurs more effectively. However, with the further decrease in EO chain length, phase separation occurs before a viscoelastic solution is formed. As a result, the maximum zero-shear viscosity is observed at an appropriate mixing fraction of surfactant in the SDS-C12EO3 system. We also investigated the micellar growth in the mixed surfactant systems by means of small-angle X-ray scattering (SAXS). It was found from the SAXS data that the one-dimensional growth of micelles was obtained in all the SDS-C12EOn (n=0-4) aqueous solutions. In a short EO chain C12EOn system, the micelles grow faster at a low mixing fraction of nonionic surfactant.     

Free-radical-induced chain breakage and depolymerization of poly(methacrylic acid): equilibrium polymerization in aqueous solution at room temperature

Hydroxyl radicals, generated by ionizing radiation in N2O saturated aqueous solutions, abstract H atoms from poly(methacrylic acid) at the methyl and methylene groups, and radicals 1 and 2 are formed, respectively. The reactions of the poly(methacrylic acid) radicals were investigated by pulse radiolysis (using optical and conductometric detection), EPR, product analysis, and kinetic simulations. The conductometric detection allowed us to measure the rate of chain scission and monomer release. Under conditions in which the polymer is largely deprotonated, the primary radical 1 abstracts a hydrogen (k= 3.5 x 10(2)s(-1)) from the methylene group, and this yields the more stable secondary radical 2. This radical undergoes chain scission by beta-fragmentation (k= 1.8 s(-1)), and the terminal (end-of-chain) radical 3 is formed. The polymer radicals terminate only slowly (2k= 80 dm3mol(-1)s(-1)). This allows effective depolymerization (depropagation) to take place (k=0.1 s(-1)). The yield of monomer release is higher than the original radical yield by up to two orders of magnitude. Once monomer is formed, it reacts with 3 (propagation, k= 15 dm3mol(-1)s(-1)), and a situation close to an equilibrium radical polymerization is approached. From these data, the equilibrium monomer concentration is calculated at 6.7 x 10(-3) mol dm(-3) at room temperature. The standard entropy of propagation is estimated at -185 to -150 J mol(-1)K(-1). Because the monomer reaches concentrations in the millimolar range, the *OH radicals increasingly react with monomers (results in oligomerization) rather than with the polymer. This effect is reflected by, for example, a lowering of chain-scission yields upon prolonged irradiation. In acid solutions, the decay of the polymer radicals becomes much faster (estimated at about 10(7)dm3mol(-1)s(-1) at pH3.5), and monomer release is no longer observed.     

Effects of surfactant micelles on viscosity and conductivity of poly(ethylene glycol) solutions

The neutral polymer-micelle interaction is investigated for various surfactants by viscometry and electrical conductometry. In order to exclude the well-known necklace scenario, we consider aqueous solutions of low molecular weight poly(ethylene glycol) (2-20)x10(3), whose radial size is comparable to or smaller than micelles. The single-tail surfactants consist of anionic, cationic, and nonionic head groups. It is found that the viscosity of the polymer solution may be increased several times by micelles if weak attraction between a polymer segment and a surfactant exists, epsilon相似文献   

Solvent-free synthesis and purification of poly[2-(dimethylamino)ethyl methacrylate] by atom transfer radical polymerization

Solvent-free synthesis of well-defined poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) (co)polymers was performed by atom transfer radical polymerization conducted under very mild conditions (in bulk at 25 degrees C). The pH-dependence and the thermo-responsive behaviour of PDMAEMA in aqueous solution were operated to isolate and purify the (co)polymers without using any organic solvent or further catalyst extraction. The viscosity in aqueous solution of so-purified PDMAEMA homopolymers and their block copolymers with poly(ethylene glycol) (PEG) was studied as a function of molar mass and concentration and a typical polyelectrolyte behaviour was observed, these catalyst-deprived polycations are able to form stable and non toxic complexes with DNA, showing good transfection efficacies in gene therapy.     

Binding nucleophiles to [Fe4Y4Cl4](2-) (Y = S or Se) can increase or suppress the rate of proton transfer to the cluster

In the proton transfer reactions between [Fe 4Y 4Cl 4] (2-) (Y = S or Se) and [pyrH] (+) (pyr = pyrrolidine) in the presence of a variety of nucleophiles (L = I (-), Br (-), PhS (-), EtS (-) or ButNC), initial binding of the nucleophile can occur to generate [Fe 4Y 4Cl 4(L)] ( n- ). The subsequent rate of proton transfer depends markedly on the nature of L. Stopped-flow kinetic studies show that proton transfer from [pyrH] (+) to [Fe 4Y 4Cl 4] (2-) { (S) k 4 = (2.1 +/- 0.5) x 10 (4) dm (3) mol (-1) s (-1); (Se) k 4 = (8.0 +/- 0.5) x 10 (3) dm (3) mol (-1) s (-1)} is increased by prior binding of L = PhS (-) or Bu ( t )NC to form [Fe 4Y 4Cl 4(L)] (n-) ( (S) k 7 (L) approximately 1 x 10 (6) dm (3) mol (-1) s (-1)), but prior binding of L = I (-), Br (-), or EtS (-) to the clusters inhibits the rate of proton transfer {e.g. (S) k 7 (I) = (6.0 +/- 0.8) x 10 (2) dm (3) mol (-1) s (-1); (Se) k 7 (I) = (4.5 +/- 0.5) x 10 (2) dm (3) mol (-1) s (-1)}. This behavior is correlated with the bonding characteristics of L and the effect this has on bond length reorganization within the cluster upon proton transfer.     

Salt effects in the binding of 4-(1-pyrenyl)-butyltrimethylammonium to poly(vinylbenzo-18-crown-6) and poly(vinylbenzoglyme) in water

The binding of 4¹-(1-pyrenyl)butyltrimethylammonium bromide (PN⁺) to the neutral poly-soap-type polymers poly(vinylbenzo-18-crown-6) (P18C6) and poly(vinylbenzoglyme) (PVBG) was studied by optical spectroscopy and fluorescence in the presence and absence of salts. Measurements of the respective binding constants were based on distinct differences in the optical absorption spectra of free and polymer-bound PN⁺. When crown ether-compelxable cations (e.g., K⁺) were added the adsorption of PN⁺ to P18C6 decreased as the neutral polymer was converted to a polycation. No decrease was found with PVBG because alkali ions do not complex significantly to this polymer in water. PN⁺ adsorption to both polymers rose rapidly, however, as the salt concentration increased. This effect was strongly anion-dependent and increased in the order of Cl^? < Br^? < I^? < CNS^? < BPh₄?. The increased binding was reflected in a higher binding constant and also in a larger number of bound PN⁺ molecules per polymer chain under saturation conditions. It is argued that the formation of ion pairs or larger ion clusters in the aqueous phase when anions are added forces more PN⁺ molecules to adsorb on the surface of the polymer coil to which they are bound as ion pairs or higher aggregates. Under saturation conditions enough PN⁺ molecules are bound to convert the pyrene monomer fluorescence spectrum into that of the excimer. These results are compared with data obtained for the anionic solute 4-(1-pyrenyl)butanoate in the presence of salts.     

Association interaction and voltammetric determination of 1-aminopyrene and 1-hydroxypyrene at cyclodextrin and DNA based electrochemical sensors

The aim of this work was voltammetric determination of 1-aminopyrene and 1-hydroxypyrene using carbon paste electrodes modified with cyclodextrin derivatives and double stranded deoxyribonucleic acid (dsDNA). The detection schemes based on a preconcentration and differential pulse voltammetric (DPV) determination at beta-cyclodextrin and gamma-cyclodextrin modified carbon paste electrode (beta-CD/CPE, gamma-CD/CPE), neutral beta-cyclodextrin polymer and carboxymethyl-beta-cyclodextrin polymer modified screen-printed electrode (beta-CDP/SPE, beta-CDPA/SPE) and dsDNA modified screen-printed electrode (DNA/SPE) are proposed for the trace determination of studied analytes within the concentration range from 2 x 10(-8) to 4 x 10(-7) mol dm(-3) and from 2 x 10(-7) to 4 x 10(-6) mol dm(-3) with the limits of quantification down to 10(-8) mol dm(-3). Depending on pH, 1-aminopyrene interacts with both surface attached CD and DNA by electrostatic bonds and supramolecular complexation while 1-hydroxypyrene associates with the CD hosts via complexation. The 1-aminopyrene interaction with dsDNA was confirmed by fluorimetric measurements in the solution phase using a competing DNA-TO-PRO-3 dye complex. In addition, the effect of temperature on this association was investigated using an electrically heated DNA-modified carbon paste electrode (DNA/CPE).     

Triple stimuli-responsive polymers based on pyrene-functionalized poly(dimethylaminoethyl methacrylate): synthesis,self-assembled nanoparticles and controlled release

A series of photo, temperature, and pH-responsive polymers have been synthesized by the quaternization of poly(dimethylaminoethyl methacrylate) (PDMAEMA) with 1-(bromomethyl)pyrene. Nanoparticles self-assembled from the pyrene-functionalized polymers in aqueous solution are demonstrated by transmission electron microscopy (TEM) and dynamic light scattering (DLS), the morphology of which can be changed under external stimulation by UV light, temperature, and pH. With the increase of the functionalization degree, the lower critical solution temperature (LCST) and the photo response of the pyrene-functionalized polymer increases, while the critical aggregation concentration (CAC) and the pH response decreases. The controlled release of encapsulated molecules such as Nile Red (NR)and anticancer drug doxorubicin (DOX) can be achieved under the triple stimulation from the self-assembled nanoparticles.     

Binding of sodium dodecyl sulfate with linear and branched polyethyleneimines in aqueous solution at different pH values

Isothermal titration microcalorimetry (ITC), conductivity, and turbidity measurements have been carried out to study the interaction of sodium dodecyl sulfate (SDS) with polyethyleneimines (PEI) including linear PEI and branched PEI at different pH values of 3, 7, and 10. In all cases, the polymers show a remarkable affinity toward SDS. At pH 3, the polymer PEI is a strong polycation, and the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At pH 7, the electrostatic attraction between SDS and PEI is weak, and the hydrophobic interaction becomes stronger. At the natural pH of 10, PEI is essentially nonionic and binds SDS in the form of polymer-bound surfactant aggregates. The charge neutralization concentration (C1) of SDS for the PEI-SDS complex can be derived from the curves of variation of the enthalpy, conductivity, and turbidity with SDS concentration. There is good agreement between the results from the three methods and all show a decrease with increasing pH. The total interaction enthalpies (deltaH(total)) of PEI with SDS are obtained from the observed enthalpy curves and the difference enthalpy (deltaH*) between the total enthalpy of branched PEI with SDS, and the total enthalpy of linear PEI with SDS can be derived from the obtained deltaH(total). The difference deltaH* increases dramatically as pH increases, which indicates that the interactions are different for linear PEI and branched PEI at high pH values. A schematic map of the different states of aggregation is presented.     

Synthesis and cleavage of core‐labile poly(alkyl methacrylate) star polymers

Core‐cleavable star polymers were synthesized by the coupling of living anionic poly(alkyl methacrylate) arms with either dicumyl alcohol dimethacrylate (DCDMA) or 2,5‐dimethyl‐2,5‐hexanediol dimethacrylate (DHDMA). This synthetic methodology led to the formation of star polymers that exhibited high molecular weights and relatively narrow molecular weight distributions. The labile tertiary alkyl esters in the DCDMA and DHDMA star polymer cores were readily hydrolyzed under acidic conditions. High‐molecular‐weight star polymer cleavage led to well‐defined arm polymers with lower molecular weights. Hydrolysis was confirmed via ¹H NMR spectroscopy and gel permeation chromatography. Thermogravimetric analysis (TGA) of the star polymers demonstrated that the DCDMA and DHDMA star polymer cores also thermally degraded in the absence of acid catalysts at 185 and 220 °C, respectively, and the core‐cleavage temperatures were independent of the arm polymer composition. The difference in the core‐degradation temperatures was attributed to the increased reactivity of the DCDMA‐derived cores. TGA/mass spectrometry detected the evolution of the diene byproduct of the core degradation and confirmed the proposed degradation mechanism. The DCDMA monomer exhibited a higher degradation rate than DHDMA under identical reaction conditions because of the additional resonance stabilization of the liberated byproduct, which made it a more responsive cleavable coupling monomer than DHDMA. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3083–3093, 2003     

Cathodic stripping voltammetry of the anticancer agent 5-fluorouracil and determination in urine

Cathodic stripping voltammetry was used to determine 5-fluorouracil (5-FU) in the presence of traces of Cu(II). It was found that the addition of 5 x 10(-9) mol dm(-3) Cu(II) to the measurement cell greatly enhanced the peak current of the adsorbed molecule. Different parameters were tested to optimize the conditions for the determination of 5-FU. The adsorbed form is reduced irreversibly. It was observed that by controlling the deposition potential, the technique could be directed to the determination of Cu(II) or the drug. The linear range was from 5 x 10(-9) to 6 x 10(-8) mol dm(-3) for 5-FU and from 6 x 10(-9) to 5 x 10(-8) mol dm(-3) for Cu(II). Detection limits of 4.6 x 10(-10) and 5 x 10(-10) mol dm(-3) were obtained for 5-FU and Cu(II), respectively. The method was applied to urine and molecules or ions which may interfere were studied.     

Experimental and theoretical study of anion-exchange preparative chromatography for neptunium: the first application to thorium(IV) and its equilibrium and kinetics

In order to study equilibrium and kinetic parameters in anion-exchange chromatography for preparatory purpose, a quantitative model for nonlinear anion-exchange chromatography in porous media was constructed, by paying special attention to interstitial length along void structure (cm) distinguished from apparent length (cm*). Langmuir-type adsorption isotherm for thorium(IV), as a natural substitution for neptunium(IV), in 6 mol dm(-3) nitric acid to anion-exchanger MSA-1 (200-400 mesh) was investigated in batch-wise and chromatographic experiments. The equilibrium parameters determined by batch-wise experiments determined as k=2.4x10(2) mol(-1) dm3 s(-1) and s0=0.5 mol dm(-3) agrees very well with the values of k=222 mol(-1) dm3 s(-1) and s0=0.5 mol dm(-3) derived from fitting by the numerical calculation. Kinetic parameters of ks and D affect band profile similarly, thereby maximum value of each parameter was evaluated as ks=1.3 mol(-1) dm3 s(-1) and D=9x10(-4) cm2 s(-1) by the numerical calculations.     

A re-evaluation of the photophysical properties of 1,4-bis(phenylethynyl)benzene: a model for poly(phenyleneethynylene)

Photophysical measurements, recorded in aerated cyclohexane at 283 K, indicate that 1,4-bis(phenylethynyl)benzene behaves in a conventional manner, undergoing emission from the lowest vibrational level of the first excited singlet state; there is no evidence for aggregation of this material in cyclohexane solution in the concentration range (1-250) x 10(-6) mol dm(-3). However, in highly viscous, low-temperature glasses, the material does exhibit inhomogeneous fluorescence behavior, and wavelength-dependent excitation and emission spectra, indicative of a slow rate of relaxation of conformers of the excited states compared to the rate of fluorescence.     

Noninteracting versus interacting poly(N-isopropylacrylamide)-surfactant mixtures at the air-water interface

Two polymer-surfactant mixtures have been studied at the air-water interface using neutron reflectivity and surface tension techniques. For the noninteracting system poly(N-isopropylacrylamide) (PNIPAM)/octaethyleneglycol mono n-decyl ether (C10E8), the adsorption behavior is competitive and driven purely by surface pressure (pi). When pi(polymer) > pi(surfactant), the surface layer consists of almost pure polymer, and for pi(polymer) < pi(surfactant), the polymer is displaced from the surface by the increasing pressure of the surfactant. Beyond the CMC, the polymer is completely displaced from the surface. For the interacting system PNIPAM/sodium dodecyl sulfate (SDS) where the two species interact strongly in the bulk beyond the critical aggregation concentration (CAC), the surface behavior is more original. Earlier neutron reflectivity studies investigated PNIPAM adsorption behavior where the SDS was contrast-matched to the solvent. In the present study, complementary measurements of SDS adsorption where PNIPAM is contrast-matched to the solvent give a complete view of the surface composition of the mixed system. At a constant polymer concentration, with increasing SDS, three main regimes are obtained. For C(SDS) < CAC, adsorption is governed by simple competition and PNIPAM is predominant at the interface. At intermediate SDS concentration (CAC < C(SDS) < x2, where x2 indicates the predominance of free SDS micelles), interfacial behavior is governed by bulk polymer-surfactant interaction. Adsorbed polymer is displaced from the interface to form PNIPAM-SDS complex in the bulk. SDS adsorption remains weak since most of the SDS molecules are used to form bulk polymer-surfactant aggregates. Further increase in SDS concentration results in continued displacement of PNIPAM and an abrupt increase in SDS adsorption. This is a result of saturation of bulk polymer chain with adsorbed micelles. Interestingly, beyond x2, PNIPAM is not completely displaced from the surface. A mixed PNIPAM-SDS adsorbed layer with enhanced packing of the SDS monolayer is formed.     

Simultaneous determination of trace amounts of cadmium, nickel and cobalt in water samples by adsorptive voltammetry using ammonium 2-amino-cyclopentene dithiocarboxylate as a chelating agent

This paper reports the use of an adsorptive voltammetric technique for the simultaneous detection of Cd(II), Ni(II) and Co(II) using ammonium 2-amino-cyclopente dithiocarboxylate as a selective complexing agent. Scans containing three resolved peaks corresponding to these metals were obtained in synthetic and real samples. The reduction current peaks of the metals that were distinctly separated by 200 mV or more, allowing their determination over a wide range of concentrations. These metals can be quantified at concentrations above 1.33x10(-8) mol dm(-3) Cd(II), 8.51x10(-9) mol dm(-3) Ni(II) and 3.39x10(-10) mol dm(-3) Co(II). The influence of pH, ligand concentration, scan rate, accumulations time and applied potential was investigated. The R.S.D. at a concentration level of 1.78x10(-7) mol dm(-3) of Cd(II), 3.40x10(-7) mol dm(-3) and Ni(II) and 1.7x10(-9) mol dm(-3) of Co(II) was 2.5% for Cd(II), 2.7% for Ni(II) and 3.3% for Co(II). The method was applied to various water samples.