Thermo-optic multimode interference switches with air and silicon trenches

A novel thermo-optic multimode interference (MMI) switch with air and silicon trenches was proposed, and the performance of the switch was simulated. In the design, one heating electrode is used to alter the refractive index at a spot image which changes the phase of this image to realize the switching function. The simulation results clearly indicate that the MMI switch can satisfy −39 dB crosstalk at two states. The electric power consumption for the MMI switch with these trenches is less than half of that of a conventional MMI switch.     

A 1 × 2 optical switch using one multimode interference region

A 1 × 2 optical switch using only one multimode interference (MMI) region is designed and demonstrated in GaAs/AlGaAs. This design makes a single MMI region works as MMI coupler using paired interference at “off” state and symmetric interference at “on” state. By injecting a current of 110 mA, the measured on/off ratio and crosstalk are 23 dB and 33 dB, respectively in the demonstrated device with GaAs/GaAlAs.     

Analysis of multiple reflections in hybrid photonic crystal multimode interference coupler

In this paper the analysis of multiple reflections in photonic crystal (PhC) multimode interference (MMI) couplers using eigen-mode expansion method is presented. The analysis is conducted on a hybrid PhC structure which consisted of 1-D PhC multimode waveguide sandwiched between 2-D PhC input/output waveguides. In PhC multimode waveguide, where the mechanism of wave confinement is not due to total internal reflection but due to photonic bandgap properties, the reflectivity at 2-D PhC facet wall would be very large for all the guided modes in the waveguide when ever the image formed due to MMI effect does not coincides with the output access waveguide.     

New Criterion for Designing Silica Multimode Interference Power Splitters

We introduce a new criterion for designing 1 × N silica multimode interference power splitters using overlapping-image multimode interference analysis. This criterion requires that widths of multimode waveguides in the devices should be greater than 2 times the product of port number N and effective widths of output waveguides. Better device uniformity can be achieved when the new criterion is satisfied.     

New Criterion for Designing Silica Multimode Interference Power Splitters

We introduce a new criterion for designing 1 × N silica multimode interference power splitters using overlapping-image multimode interference analysis. This criterion requires that widths of multimode waveguides in the devices should be greater than 2 times the product of port number N and effective widths of output waveguides. Better device uniformity can be achieved when the new criterion is satisfied.     

An ultra-short double-wavelength optical power splitter for two waveguides operation based on photonic crystal multimode interference

In this paper, we design an ultra-short 1 × 2 1310/1550 nm double-waveguide optical power splitter based on photonic crystal multimode interference. The device can be used to divide the input beam equally for both 1310 nm and 1550 nm at the same time. The total multimode waveguide length of this device is only about 13 μm, which is one 210th of the conventional dielectric counterparts reported. On the basis of the guided-mode propagation analysis method, the self-imaging effect is discussed for the case of symmetric incidence. The finite-difference time-domain method is used to simulate the propagation of the beam in the multimode interference. The results show that the repetitive appearances of single image and twofold image of the input field occur alternatively in this device.