Copper(I)-mediated living radical polymerization was used to synthesize a series of self-crosslinkable ABA triblock copolymers in which the side blocks are formed by a monomer supporting a reactive functional group, as allyl methacrylate (AMA). The copolymers were prepared according with a two steps synthetic methodology. In the first step, ,ω-dibromo homopolymers of polystyrene (PS), poly(methyl methacrylate) (PMMA) and poly(butyl acrylate) (PBA) were synthesized by atom transfer radical polymerization (ATRP). In the second step, these telechelic polymers were employed as macroinitiators for the ATRP of AMA in benzonitrile solution at 70 °C with CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system in order to obtain well-defined functionalized triblock copolymers. The living nature of the block copolymerizations involved was investigated in each case and a similar general behaviour was found. Thus, the molecular weights increased fairly linearly with the conversion degree with first-order kinetics in respect of monomer until moderate conversions, where secondary reactions become more relevant. Finally, intermacromolecular crosslinking were observed giving macrogels as a unique reaction product. The polymers were characterized by different characterization techniques, such as size exclusion chromatography (SEC), 1H NMR spectroscopy and differential scanning calorimetry (DSC). In addition, the facile thermal crosslinking of these block copolymers was evaluated from rheological measurements. 相似文献
A homogeneous reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out in N, N-dimethylformamide(DMF) (25%, v/v) at 69°C, using an initiating system azobisisobutyronitrile (AIBN)/CuBr2/N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA). The kinetics of homogeneous solution polymerizations showed linear first-order rate plots, indicating a constant number of growing species throughout the polymerization as well as a negligible contribution of termination or transfer reactions; a linear increase of the number-average molecular weight with conversion, and relatively low polydispersities, but low initiator efficiency. The dependence of the rate of polymerization on the concentrations of initiator, catalyst, ligand and temperature were presented. 相似文献
The telechelic α,ω‐alkyne‐poly(methyl methacrylate) (alkyne‐PMMA‐alkyne) was synthesized by single electron transfer radical coupling (SETRC) reaction of α‐alkyne, ω‐bromine‐poly(methyl methacrylate) (alkyne‐ PMMA‐Br). The propargyl 2‐bomoisobutyrate (PgBiB) was first prepared to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate at 45°C using CuCl/1,1,4,7,10,10‐hexamethyl triethylenetetramine (HMTETA) as homogeneous catalytic system. Then the SETRC reaction was conducted at room temperature in the presence of nascent Cu(0) and N,N,N′,N′ ′,N′ ′‐pentamethyldiethyllenetriamine (PMDETA). The precursor alkyne‐PMMA‐Br and coupled product alkyne‐PMMA‐alkyne were characterized by GPC and 1H NMR in detail. 相似文献
Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from 1H NMR spectra which were further confirmed by quantitative 13C{1H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are rG = 0.73 and rS = 0.42, respectively. 相似文献
Xylene/N,N-dimethylformamide (DMF) and xylene/ethanol were employed as mixed solvents, respectively, for the reverse atom transfer radical polymerization (R-ATRP) of styrene with the azobisisobutyronitrile (AIBN)/CuBr2/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) initiating system. With a limited amount of DMF added in, CuBr2/PMDETA complex could dissolve well in the reaction system, so the control of polymerization was enhanced compared with the one in which simplex xylene was used as solvent. But the polarity of DMF leaded kinetics to deviation from first order. Ethanol could also improve the solubility of catalyst and be scavenged quickly by argon at 110°, therefore the impact of polarity of solvent on kinetics was negligible. Induction periods were not observed here indicating rapidly establishment of equilibrium between Cu(I) and Cu(II). This method that adding a little amount of polar solvent with low boiling point into non-polar solvent gives a new way to solve the problem of poor solubility of the catalyst in R-ATRP. 相似文献
A novel photo-induced initiating system, 2, 2 - dimethoxy-2-phenylacetophenone (DMPA)/ferric tri(N,N-diethyl-dithiocarbamate) [Fe(DC)_3], was developed and used for the atom transfer radical polymerization (ATRP) of styrene intoluene. The polymerization proceeds with DMPA as photo-initiator, Fc(DC)_3 as catalyst and DC as a reversible transfergroup, while the halogen and ligands are free. Well-defined PSt was prepared and the polymerization mechanism revealed byend group analysis belongs to a reverse ATRP. Block copolymer was prepared by using thus obtained PSt as macroinitiatorand Fe(DC)_2 as catalyst under UV light irradiation via a conventional ATRP process. 相似文献
Atom transfer radical polymerization (ATRP) of tert-butyl methacrylate (tBMA) was investigated using cuprous bromide with different ligands, solvents, deactivators, etc. The polymerization in bulk and diphenyl ether solvent system performed using Cu(I)Br complexed with N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA) catalyst in conjunction with 2-bromopropionitrile as an initiator at room temperature showed a curvature in the first-order kinetic plot. The controlled polymerization in methanol solution resulted in slower rate of polymerization and lower molecular weights. Well-defined diblock copolymers of PSt-b-PtBMA synthesized by polystyrene bromo macroinitiator (PSt-Br) with Cu(I)Cl/PMDETA catalyst system yielded predetermined molecular weights and lower polydispersities. Otherwise, the Cu(I)Br/PMDETA catalytic system showed an inefficient polymerization of tert-butyl methacrylate with lower molecular weights and higher polydispersities. Subsequent hydrolysis of the homopolymer refluxed in dioxane with addition of HCl afforded well-defined poly(methacrylic acid). 相似文献
2-Methoxy ethyl acrylate (MEA), a functional monomer was homopolymerized using atom transfer radical polymerization (ATRP) technique with methyl 2-bromopropionate (MBP) as initiator and CuBr/N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system; polymerization was conducted in bulk at 60 °C and livingness was established by chain extension reaction. The kinetics as well as molecular weight distribution data indicated towards the controlled nature of polymerization. The initiator efficiency and the effect of initiator concentration on the rate of polymerization were investigated. The polymerization remained well-controlled even at low catalyst concentration of 10% relative to initiator. The influence of different solvents, viz. ethylene carbonate and toluene on the polymerization was investigated. End-group analysis for the determination of high degree of functionality of PMEA was determined with the help of 13C{1H} NMR spectra. Chain extension experiment was conducted with PMEA macroinitiator for ATRP of acrylonitrile (AN) in ethylene carbonate at 70 °C using CuCl/bpy as catalyst system. The composition of individual blocks in PMEA-b-PAN copolymers was determined using 1H NMR spectra. 相似文献
The successful chain‐growth copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel‐permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. In addition, the electron transfer mediated “click‐radical” concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well‐defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.
Novel telechelic tribromo terminated polyurethane (Br3-PU-Br3) was used as a macroinitiator in atom transfer radical polymerization (ATRP) of methyl methacrylate using CuBr as a catalyst and NN,N',N”,N”-pentamethyldiethylenetriamine (PMDETA) as a ligand. During the course of polymerization, poly(methyl methacrylate)-b-polyurethane-b-poly(methyl methacrylate) (PMMA-b-PU-b-PMMA) tri-block copolymers were formed. The resulting tri-block copolymers were characterized by gel permeation chromatography (GPC) and 1H nuclear magnetic resonance (NMR) spectroscopy. Molecular weight of the tri-block copolymers increases with increasing conversion. This result shows Br3-PU-Br3/CuBr/PMDETA initiating system polymerized methyl methacrylate through ATRP mechanism. NMR spectroscopy results revealed that apart from bromine atom transfer from Br3-PU-Br3 to PMDETA-CuBr complex, bromine atom transfer from the initially formed tri-block copolymer to PMDETA-CuBr complex also takes place, and, as a result, double bond terminated copolymer formed. Mole ratio of polyurethane and poly(methyl methacrylate) present in the PMMA-b-PU-b-PMMA tri-block copolymers was calculated using 1H-NMR spectroscopy and it was found to be comparable with the mole ratio calculated through GPC results. Differential scanning calorimetric results confirmed the presence of two different phases in the tri-block copolymers. 相似文献
The triblock copolymer poly(methyl methacrylate-b-lauryl methacrylate-b-methyl methacrylate) {P(MMA-b-LMA-b-MMA)} has been synthesized by a two stage atom transfer radical polymerization in bulk at near room temperature (ca. 35 °C) using CuCl/pentamethyldiethylenetriamine (PMDETA)/tricaprylylmethylammonium chloride (Aliquat®336) complex as the catalyst and 1,2-bis (bromoisobutyryloxy)ethane (BIBE) as the initiator for the polymerization of LMA in the first stage. The same catalyst was also used for the polymerization of MMA in the second stage. The dynamic mechanical thermal analysis of a sample with the middle block Mn = 82000 and each end block Mn = 14500 showed typical features of a thermoplastic elastomer. 相似文献
The self-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in cyclohexanone (CHO) in the presence of CuCl2/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) is reported. The linear semilogarithmic plot of ln([M]0/[M]) vs time, the linear increase of number-average molecular weight (Mn) with conversion, and rather narrow molecular weight distributions (MWDs) have been observed, which are in agreement of the characteristics of living/controlled polymerization. The NMR spectrum revealed the existence of terminal chlorine. The chain extension further proved the living characteristic. The polymerization can only be successful using CHO as the solvent, and is well controlled at the temperature as low as 50 °C. The effects of ligand, solvent, temperature and monomer to catalyst ratio are all discussed. 相似文献