Synthesis and characterization of thiophene-containing liquid crystals

Six series of liquid crystal materials containing a 2,5-disubstituted thiophene unit were synthesized. The liquid crystal compounds obtained were characterized by NMR, differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction techniques. The properties of liquid crystalline phases were investigated as a function of spacer units, number of aromatic core rings and different terminal moieties. Cyano, methoxy and iodo groups were used as terminal groups. It is found that: (i) compounds having one thiophene ring and one phenyl ring connected by an ester group, with a length/breadth value of 2.1, exhibit no mesophase, while other compounds containing two biphenyl rings, with a length/breadth ratio of 2.7, show mesophases; (ii) the polarity of terminal groups and the flexible spacer length significantly affect the thermal behaviour of these compounds; (iii) the nematic transition range of cyano-containing compounds decreases with increasing length of the flexible spacer, and long alkenyloxy chains tend to facilitate the formation of the smectic phase and suppress the nematic phase in all the mesogenic compounds synthesized.     

Synthesis and characterization of thiophene-containing liquid crystals

Six series of liquid crystal materials containing a 2,5-disubstituted thiophene unit were synthesized. The liquid crystal compounds obtained were characterized by NMR, differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction techniques. The properties of liquid crystalline phases were investigated as a function of spacer units, number of aromatic core rings and different terminal moieties. Cyano, methoxy and iodo groups were used as terminal groups. It is found that: (i) compounds having one thiophene ring and one phenyl ring connected by an ester group, with a length/breadth value of 2.1, exhibit no mesophase, while other compounds containing two biphenyl rings, with a length/breadth ratio of 2.7, show mesophases; (ii) the polarity of terminal groups and the flexible spacer length significantly affect the thermal behaviour of these compounds; (iii) the nematic transition range of cyano-containing compounds decreases with increasing length of the flexible spacer, and long alkenyloxy chains tend to facilitate the formation of the smectic phase and suppress the nematic phase in all the mesogenic compounds synthesized.     

Thermotropic liquid‐crystalline polyesters containing biphenyl mesogens in the main chain: The effect of connectivity

A homologous series of main‐chain thermotropic liquid‐crystalline polyesters containing rigid biphenyl mesogen and flexible methylene spacers were synthesized with the AB‐type self‐polycondensation approach. The polyesters were characterized with ¹H NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarized light optical microscopy, and X‐ray diffraction. These polyesters, containing trimethylene spacers on the acid side and various spacers on the alcohol side of the biphenyl mesogen, showed an odd–even effect in the transition temperatures and mesophase type. The even members showed higher transition temperatures than the odd ones. A normal smectic mesophase was observed for the even members, whereas the odd‐membered counterparts exhibited a tilted smectic mesophase. To study the effect of connectivity, the mesophase characteristics of these polyesters were compared with those of the isomeric AB‐type polyesters without any methylene spacer on the acid side of the biphenyl moiety. The mesophase characteristics were insensitive to whether the mesogen was connected to a carboxyl unit or a methylene unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2734–2746, 2004     

The synthesis and transition temperatures of 5-(4-alkyl- and 4-alkoxy-phenyl)-2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan: a comparison with their biphenyl and terphenyl analogues

The synthesis and transition temperatures of a series of 5-(4-alkyl- and 4-alkoxy-phenyl)2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan are presented. The 2-cyanobenzo[b]furans show similar mesophase types to the analogous biphenyl and terphenyl compounds, which are obtained by replacing the benzo[b]furan unit with a phenyl ring. The transition temperatures for the 2-cyanobenzo[b]furan compounds are always higher than for their biphenyl and terphenyl counterparts, but they are much lower than for the corresponding phenylnaphthalenes. Five mesogenic benzo[b]furans without a cyano group were prepared as intermediates and these compounds have lower clearing points than their biphenyl analogues.     

Improved nematic mesophase stability of benzoxazole-liquid crystals via modification of inter-ring twist angle of biphenyl unit

A series of nematic heterocyclic liquid crystals, 2-(2?-fluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(2)PBx) bearing hydrogen (nPF(2)PBH), methyl (nPF(2)PBM) and nitro (nPF(2)PBN) terminal groups, respectively, are developped and investigated. The results show that the nematic mesophase stability is obviously improved via a slightly increase in the inter-ring twist angle between the planes of two phenyl rings in the biphenyl unit, where modification of the twist angle can be achieved by adjusting the position of the lateral monofluorine substituent from the outer to the inter ring of the biphenyl mesogenic core unit. Meanwhile, the inter-ring lateral fluorine substituent results in a decrease in both melting and clearing points but only a nematic mesophase with an acceptably wide mesophase range for nPF(2)PBx, and thus a potential application in liquid crystal display mixtures is expected, especially for the compounds nPF(2)PBM and nPF(2)PBN. The reduced π–π interaction/conjugation caused by the increased twist angle is considered as one of the possible reasons for the formation of a nematic mesophase.     

Synthesis, characterization and photolysis studies on liquid crystalline poly[4-(4′-x-biphenyl)yl-4″-(m-methacryloyloxyalkyloxy) cinnamate]’s

Three series of side chain liquid crystalline polymers containing terminally substituted biphenyl cinnamoyl esters were synthesized and characterized. The para position in the cinnamoyl group was connected with polymer backbone through various even numbers of methylene spacers. The terminal electron acceptor and donor substituted biphenyl groups were linked to cinnamoyl group through ester linkages. Polarizing microscopic and DSC studies confirm the formation of thermotropic mesophase up on heating. All the polymers exhibited nematic/grainy mesophases. The TGA and DSC studies showed that the nature of the terminal substituents have significant effect on mesophase temperatures as well as in thermal stability of these liquid crystalline polymers. UV light promoted photocrosslinking studies reveal that the clear involvement on photocrosslinking efficiency, although they are linked to the olefinic bond of cinnamoyl group through their ester linkage. It is observed that electron-donating group accelerate the photocrosslinking rate, while acceptor group retard the phase of the reaction on the other hand, the unsubstituted polymers show an intermediate rate.     

The synthesis and transition temperatures of 5-(4-alkyl- and 4-alkoxy-phenyl)-2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan: a comparison with their biphenyl and terphenyl analogues

The synthesis and transition temperatures of a series of 5-(4-alkyl- and 4-alkoxy-phenyl)2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan are presented. The 2-cyanobenzo[b]furans show similar mesophase types to the analogous biphenyl and terphenyl compounds, which are obtained by replacing the benzo[b]furan unit with a phenyl ring. The transition temperatures for the 2-cyanobenzo[b]furan compounds are always higher than for their biphenyl and terphenyl counterparts, but they are much lower than for the corresponding phenylnaphthalenes. Five mesogenic benzo[b]furans without a cyano group were prepared as intermediates and these compounds have lower clearing points than their biphenyl analogues.     

Asymmetric banana-shaped liquid crystals with two different terminal alkoxy chains

Two series of asymmetric banana-shaped compounds have been synthesized and studied. In the 1,3-phenylene bis[4-(4'-alkoxybenzoyloxy)]benzoate series the lack of symmetry was derived solely from the difference in length of the two terminal alkoxy chains. In the 3,4'-biphenylene bis[4-(4'-alkoxybenzoyloxy)]benzoate series the asymmetric nature originates from the 3,4'-substitution of the central biphenyl group and from the difference in length of the two terminal chains. All the melting points of the asymmetrical compounds in the series with the central phenyl unit are lower than those of the symmetrical compounds. The liquid crystalline B₁ or B₂ phase was retained in all cases. In the series with the central biphenyl unit the compounds with the shortest chain attached to the para-position of the central biphenyl unit have the lowest melting points. A significant lowering of the melting points in comparison with the symmetrically substituted compounds, however, could not be achieved. All the compounds of both series show a layer spacing which is comparable to those of the symmetrically substituted parent compounds. The observed switching behaviour of both the symmetric and asymmetric compounds with a B₂ phase was antiferroelectric.     

Microstructure and dynamics of a mesogenic diol

A number of techniques have been used to elucidate the structure and dynamics of 4,4'-bis(6-hydroxyhexyloxy)biphenyl (BHHBP) in its various phases. X-ray diffraction studies indicate that the molecules pack in a crystalline phase which melts to produce a highly ordered smectic/disordered crystal mesophase. Based on molecular models and the infrared results, the all trans conformation requires a 45°-55° tilt of the molecules in the smectic layers. Infrared spectroscopic results indicate that a predominantly trans chain conformation and hydrogen bonding of the layered crystal structure persists through the mesophase. Additionally, rotational freedom about the biphenyl linkage appears to occur only in the isotropic phase. NMR data indicate that the alkoxy chain is at or near co-planarity with the respect to the phenyl ring in the crystalline phase, with reorientational motion of the biphenyl group becoming allowed in the mesophase in the form of rapid (τ_c ∼ 3 μs at 100°C) small angle liberations and, perhaps, slower (τ_c ∼ 0·5 ms at 100°C) 180° ring flips. The alkyl chains exhibit a progressive increase in mobility with distance from the biphenyl core and achieve considerable mobility at the hydroxy end of the chain despite the fact that hydrogen bonding still occurs in the mesophase.     

Liquid crystal properties of novel diacetylenes having a pyridine end group

Asymmetrical diacetylenes with a pyridine ring bonded directly to one end of the diacetylene unit and an aryl system containing a flexible alkoxy chain at the opposite end, have been synthesized and show liquid crystalline behaviour. The mesophase behaviour is shown to be dependent on the length of the flexible alkoxy chain. Incorporation of one of these diacetylenes in a polymer 'guest-host' system at a 15 wt% concentration gave a high X⁽²⁾ non-linear optical susceptibility of 4.27 × 10^-9e.s.u.     

Synthesis and thermotropic properties of new discotic 1,3,5-trisubstituted s-triazinetriones obtained by cyclotrimerization of isocyanates

The synthesis of a number of s-triazine-2,4,6-triones (isocyanurates) by cyclotrimerization of 4-monoalkoxy-, 3,4-dialkoxy-, or 3,4,5-trialkoxyphenyl-, benzyl-, or styryl-isocyanates is reported. The thermal and phase behaviour of the novel compounds were investigated by optical polarized light microscopy and thermal analysis. No mesophase could be observed for any of the precursors except 4-decyloxybenzoic acid. Mesophases of the isocyanurates were observed only in the series containing 3,4-dialkoxyphenyl moieties. A vinylene group between the inner s-triazine ring and the outer phenylene rings gives low melting points and enantiotropic mesophases for C₈ and longer alkyl chains. The phenylisocyanurates may exhibit a monotropic mesophase and normally have the highest melting points of the three types, whereas a methylene spacer suppresses formation of a mesophase. According to the textures observed, the mesophases are hexagonal columnar. This will have to be confirmed by X-ray scattering techniques.     

Pseudo-rodlike molecules with hockey-stick-shaped mesogen

Hockey-stick-shaped molecules were newly synthesised to obtain pseudo-rodlike molecules. The designed molecules consist of a polar terminal ring (i.e. 2,3,4-, 2,4,6- or 3,4,5-trifluorophenyl group), a rigid middle block (i.e. four rings with aligned ester linkages) and a flexible terminal chain (i.e. dodecyloxy group). We found that the compounds with 2,3,4- and 3,4,5-trifluorophenyl groups formed a smectic A mesophase with head-to-head bi-layer building blocks, whereas the compound with 2,4,6-trifluorophenyl group formed a nematic mesophase. This might be concerned with the behaviour of pseudo-rodlike molecules     

Lateral protrusion and mesophase behaviour in pure and mixed states of model compounds of the type 4-(4′-substituted phenylazo)-2-(or 3-)methyl phenyl-4'-alkoxy benzoates

Two groups of the title compounds were prepared and investigated for their mesophase formation and stability. Each group constitutes five homologous series that differ from each other by the polar substituent X (CH₃O, CH₃, H, Cl, and NO₂). Within each homologous series, the number (n) of carbons in the alkoxy chain varies between 8, 10, 12, 14 and 16. The difference between the two groups of compounds lies in the orientation protrusion of the lateral methyl group attached to the central benzene ring. In the first group (Group I) the methyl substituent, introduced into the o-position with respect to the ester group, makes an angle of 60° with the long axis of the molecule. In the other series of compounds (Group II), the orientation angle is 120° as it is introduced into the position-3. All possible binary phase diagrams could be constructed in which the two components are corresponding positional isomers from either group. The study aimed to investigate the effect of inclusion of the lateral methyl group, as well as its spatial orientation, on the mesomorphic properties of the produced derivatives in their pure and mixed states. The compounds prepared in both groups were characterised for their mesophase behaviour by differential scanning calorimetry and polarised light microscopy. The nematic phase is the mesophase observed in most of the compounds prepared and their binary mixtures.     

The first examples of monodispersive liquid crystalline tetramers possessing four non-identical anisometric segments

The molecular design, synthesis and thermal behaviour of the first liquid crystalline tetramers composed of four non-identical mesogenic entities connected covalently through paraffinic spacers are presented. These new molecular structures consisting of a tolan (half disc-shaped), azobenzene (photoactive), biphenyl and cholesteryl ester (thermochromic) cores, connected through either an even-even-odd or an odd-even-odd paraffinic spacer, exhibit features of a columnar mesophase.     

The first examples of monodispersive liquid crystalline tetramers possessing four non-identical anisometric segments

The molecular design, synthesis and thermal behaviour of the first liquid crystalline tetramers composed of four non-identical mesogenic entities connected covalently through paraffinic spacers are presented. These new molecular structures consisting of a tolan (half disc-shaped), azobenzene (photoactive), biphenyl and cholesteryl ester (thermochromic) cores, connected through either an even-even-odd or an odd-even-odd paraffinic spacer, exhibit features of a columnar mesophase.     

The effect of terminal epoxy modification on the mesomorphic and thermal stability of biphenyl ester liquid crystals

ABSTRACT

A series of biphenyl ester compounds with alkenyl, alkyl, oxirane, and 1,3-dioxolane as the terminal groups have been synthesised for investigating the mesomorphic and thermal stability. Based on the same carbon skeleton, the allyl-terminated compound V1OLC has no mesophase, while the oxirane-terminated compound POLC not only has wider multiple smectic mesophase compared with the propyl-terminated compound 3OLC but also exhibits the best thermal stability. However, when the terminal groups change from oxirane to 1,3-dioxolane, EOLC shows neither mesophase nor the good thermal stability. In addition, with the extension of the terminal chains, the butyl-terminated compound 4OLC gives the widest smectic mesophase. These imply that the mesomorphic and thermal stability of these biphenyl ester compounds are dependent on the suitable terminal chain lengths and epoxy sizes. Meanwhile, Density Functional Theory (DFT) calculations were conducted to assist in analysing the experimental results.     

Fabrication of vertical alignment liquid crystal cell without forming a conventional polyimide-alignment layer

Two series of asymmetric banana-shaped compounds have been synthesized and studied. In the 1,3-phenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the lack of symmetry was derived solely from the difference in length of the two terminal alkoxy chains. In the 3,4′-biphenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the asymmetric nature originates from the 3,4′-substitution of the central biphenyl group and from the difference in length of the two terminal chains. All the melting points of the asymmetrical compounds in the series with the central phenyl unit are lower than those of the symmetrical compounds. The liquid crystalline B₁ or B₂ phase was retained in all cases. In the series with the central biphenyl unit the compounds with the shortest chain attached to the para-position of the central biphenyl unit have the lowest melting points. A significant lowering of the melting points in comparison with the symmetrically substituted compounds, however, could not be achieved. All the compounds of both series show a layer spacing which is comparable to those of the symmetrically substituted parent compounds. The observed switching behaviour of both the symmetric and asymmetric compounds with a B₂ phase was antiferroelectric.     

Experimental and theoretical approaches of molecular geometry and mesophase behaviour relationship of laterally substituted azopyridines

New 10 laterally chloro azopyridine-based derivatives, with terminal alkoxy chain length varies between 6 and 16 carbons, were prepared. The mesophase behaviour was investigated for prepared homologues by differential scanning calorimetry and polarised light microscopy. Each homologous series differ from each other by the lateral attached Cl group in the ortho- or meta-position with respect to the ester carbonyl core in the central benzene ring. Elemental analyses, FT-IR, ¹H NMR and C¹³ NMR spectroscopy were used for molecular structure confirmation of the prepared compounds. All prepared homologues were found to be nematogenic. Density functional theory theoretical calculations used to confirm the experimental data and the results are consistent with the experimental investigations. It was found that the nematic range and stability is influenced by the length of the alkoxy chain and the orientation of the lateral chloro group. Moreover, an experimental and theoretical comparative study between the Cl-lateral isomers with respect to the previously reported methyl lateral derivatives as well as the laterally neat one in determination of the type, the stability of the mesophase and the molecular geometry.     

Hydrogen-Bond Cyclization Programming of Ultrasensitive Esters and Its Application in Gene Delivery

The ester bond as a universal linker has recently been applied in gene delivery systems owing to its efficient gene release by electrostatic repulsion after its cleavage. However, the ester bond is nonlabile and is difficult to cleave in cells. This work reports a method in which a secondary amine was introduced to the β-position of the ester bond to generate a hydrogen-bond cyclization (HBC) structure that can make the ester bond hydrolysis ultrafast. A series of molecules comprising ultrasensitive esters that can be activated by H₂O₂ were synthesized, and it was found that those able to form an HBC structure showed complete ester hydrolysis within 5 h in both water and phosphate-buffered saline solution, which was several times faster than other methods reported. Then, a series of amphiphilic poly(amidoamine) dendrimers were constructed, comprising the ultrasensitive ester groups for gene delivery; it was found that they could effectively release genes under quite a low concentration of H₂O₂ (<200 μm ) and transport them into the nucleus within 2 h in Hela cells with high safety. Their gene transfection efficiencies were higher than that of PEI_25k. The results demonstrated that the hydrogen-bond-induced ultrasensitive esters could be powerfully applied to construct gene delivery systems.     

The effect of fluorinated terminal chains on the mesomorphic properties of 4,4'-disubstituted phenyl benzoates

A variety of 4,4'-disubstituted phenyl benzoates having a terminal chain containing multifluorine atoms, attached directly to the benzene ring or through an ester group, have been synthesized and their mesomorphic properties determined by hot stage polarizing optical microscopy. These properties were compared to those of the corresponding hydrogenated esters and to other esters containing rigid terminal chains. Usually transition temperatures were higher and mesophase ranges wider than those observed for the parent compounds but no nematic phases were found. Any mesophase seen was usually a smectic A phase sometimes accompanied by a smectic C phase. Crystal E phases were found along with the smectic A phase in alkyl or alkoxy esters having a C₉F₁₉CO₂ chain on the acid side. A first order smectic A-smectic C transition was observed in the ester with CN on the acid side and O₂CC₇F₁₅ on the phenol side. A comparison of the effect of a terminal fluorinated chain and a lateral fluorine group on one set of esters is also included.