Heavy-ion LINAC development for the US RIA project

The Nuclear Science Community in the Unites States has unanimously concluded that developments in both nuclear science and its supporting technologies make building a world-leading Rare-Isotope Accelerator (RIA) facility for production of radioactive beams the top priority. The RIA development effort involves several US Laboratories (ANL, JLAB, LBNL, MSU, ORNL). The RIA facility includes a CW 1.4 GeV driver LINAC and a 100 MV post-accelerator both based on superconducting (SC) cavities operating at frequencies from 48 MHz to 805 MHz. An initial acceleration in both LINACs is provided by room temperature RFQs. The driver LINAC is designed for acceleration of any ion species; from protons up to 900 MeV to uranium up to 400 MeV/u. The novel feature of the driver LINAC is an acceleration of multiple charge-state heavy-ion beams in order to achieve 400 kW beam power. Basic design concepts of the driver LINAC are given. Several new conceptual solutions in beam dynamics, room temperature and SC accelerating structures for heavy ion accelerator applications are discussed.     

Accelerator development in India for ADS programme

At BARC, development of a Low Energy High Intensity Proton Accelerator (LEHIPA), as front-end injector of the 1 GeV accelerator for the ADS programme, has been initiated. The major components of LEHIPA (20 MeV, 30 mA) are a 50 keV ECR ion source, a 3 MeV Radio Frequency Quadrupole (RFQ) and a 20 meV drift tube linac (DTL). The Low Energy Beam Transport (LEBT) and Medium Energy Beam Transport (MEBT) lines match the beam from the ion source to RFQ and from RFQ to DTL respectively. Design of these systems has been completed and fabrication of their prototypes has started. Physics studies of the 20–1000 MeV part of the Linac are also in progress. In this paper, the present status of this project is presented.      

Segmented linear radiofrequency quadrupole/laser ion source project at TRIUMF

Reactions such as ²⁵Al(p,γ)²⁶Si are the key to understand the production of ^26g Al and ^26m Al in our galaxy. Experimental results could provide important constraints on nova nucleosynthesis and modelling where ²⁶Al is believed to be produced. To achieve such measurements, high-intensity and high-purity radioactive beams are required. However, production targets at ISOL-type facilities such as ISAC at TRIUMF produce high-intensity alkali beams by surface ionization on hot transfer tubes hampering the measurement of isotopes of interest. To overcome this issue, an ion source combining a segmented linear radiofrequency quadrupole (RFQ) to a laser ion source is being built. Its main function is to suppress alkali impurities whilst allowing for fast-release of short-lived isotopes. The beam production method, the RFQ/laser ion source and the removal of alkali contaminants are discussed in this paper.     

Design study of a radio-frequency quadrupole for high-intensity beams

The Rare isotope Accelerator Of Newness(RAON) heavy-ion accelerator has been designed for the Rare Isotope Science Project(RISP) in Korea. The RAON will produce heavy-ion beams from 660-MeV-proton to200-MeV/u-uranium with continuous wave(CW) power of 400 k W to support research in various scientific fields.Its system consists of an ECR ion source, LEBTs with 10 ke V/u, CW RFQ accelerator with 81.25 MHz and 500 ke V/u, a MEBT system, and a SC linac. In detail, the driver linac system consists of a Quarter Wave Resonator(QWR) section with 81.25 MHz and a Half Wave Resonator(HWR) section with 162.5 MHz, Linac-1, and a Spoke Cavity section with 325 MHz, Linac-2. These linacs have been designed to optimize the beam parameters to meet the required design goals. At the same time, a light-heavy ion accelerator with high-intensity beam, such as proton,deuteron, and helium beams, is required for experiments. In this paper, we present the design study of the high intensity RFQ for a deuteron beam with energies from 30 ke V/u to 1.5 MeV/u and currents in the m A range. This system is composed of an Penning Ionization Gauge ion source, short LEBT with a RF deflector, and shared SC Linac. In order to increase acceleration efficiency in a short length with low cost, the 2nd harmonic of 162.5 MHz is applied as the operation frequency in the D~+RFQ design. The D~+RFQ is designed with 4.97 m, 1.52 bravery factor. Since it operates with 2nd harmonic frequency, the beam should be 50% of the duty factor while the cavity should be operated in CW mode, to protect the downstream linac system. We focus on avoiding emittance growth by the space-charge effect and optimizing the RFQ to achieve a high transmission and low emittance growth. Both the RFQ beam dynamics study and RFQ cavity design study for two and three dimensions will be discussed.     

RFQ加速器高频测量软件和分析软件开发

强流RFQ加速器要求严格控制束流损失和束流发射度增长,因此必须准确测量和正确分析RFQ加速器的场分布和模式的场分量,并使它们符合设计要求.LebView是一个广泛应用于自动测量和数据处理的计算机软件平台,介绍在此平台上开发的RFQ自动测量软件和数据分析软件,同时给出这些软件的一些应用实例.     

The Turkish accelerator complex IR FEL project

Turkish accelerator complex (TAC) project was approved by State Planning Organization (DPT) of Turkey in 2006. The complex will contain a linac-ring type electron–positron collider as a particle factory and different accelerator based light sources. As a first step to the national center, the construction of an IR FEL facility is planned until 2011. It is also planned that the technical design report for TAC will be completed in 2010. The TAC IR FEL facility will consist of an electron linac in the range of 15–40 MeV energy to obtain FEL in 2–185 microns range. In this study, the preliminary parameters of TAC IR FEL facility were presented. The possible using of the obtained FEL in material science, nonlinear optics, semiconductors, biotechnology, medicine and photochemical processes were discussed.     

A new compact structure for a high intensity low-energy heavy-ion accelerator

A new compact accelerating structure named Hybrid RFQ is proposed to accelerate a high-intensity low-energy heavy ion beam in HISCL （High Intensive heavy ion SuperConducting Linear accelerator）, which is an injector of HIAF （Heavy Ion Advanced Research Facility）. It is combined by an alternative series of acceleration gaps and RFQ sections. The proposed structure has a high accelerating ability compared with a conventional RFQ and is more compact than traditional DTLs. A Hybrid RFQ is designed to accelerate 238U34＋ from 0.38 MeV/u to 1.33 MeV/u. The operation frequency is described to be 81.25 MHz at CW （continuous wave） mode. The design beam current is 1.0 mA. The results of beam dynamics and RF simulation of the Hybrid RFQ show that the structure has a good performance at the energy range for ion acceleration. The emittance growth is less than 5% in both directions and the RF power is less than 150 kW. In this paper, the results of beam dynamics and RF simulation of the Hybrid RFQ are presented.     

RF properties of 700 MHz, <Emphasis Type="Italic">β</Emphasis> = 0.42 elliptical cavity for high current proton acceleration

BARC is developing a technology for the accelerator-driven subcritical system (ADSS) that will be mainly utilized for the transmutation of nuclear waste and enrichment of U²³³. Design and development of superconducting medium velocity cavity has been taken up as a part of the accelerator-driven subcritical system project. We have studied RF properties of 700 MHz, β = 0.42 single cell elliptical cavity for possible use in high current proton acceleration. The cavity shape optimization studies have been done using SUPERFISH code. A calculation has been done to find out the velocity range over which this cavity can accelerate protons efficiently and to select the number of cells/cavity. The cavity’s peak electric and magnetic fields, power dissipation P _c , quality factor Q and effective shunt impedance ZT ² were calculated for various cavity dimensions using these codes. Based on these analyses a list of design parameters for the inner cell of the cavity has been suggested for possible use in high current proton accelerator.      

SECRAL在18GHz频率下产生强流高电荷态离子束的初步结果

A Superconducting ECR ion source with Advanced design in Lanzhou (SECRAL) was successfully built to produce intense beams of highly charged ions for Heavy Ion Research Facility in Lanzhou (HIRFL).The ion source has been optimized to be operated at 28GHz for its maximum performance.The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping.For 28GHz operation,the magnet assembly can produce peak mirror fields on axis 3.6T at injection,2.2T at extraction and a radial sextupole field of 2.0T at plasma chamber wall.A unique feature of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. During the ongoing commissioning phase at 18GHz with a stainless steel chamber,tests with various gases and some metals have been conducted with microwave power less than 3.2kW and it turned out the performance is very promising.Some record ion beam intensities have been produced,for instance,810eμA of O~(7 ),505eμA of Xe~(20 ),306eμA of Xe~(27 ),21eμA of Xe~(34 ),2.4eμA of Xe~(38 ) and so on.To reach better results for highly charged ion beams,further modifications such as an aluminium chamber with better cooling,higher microwave power and a movable extraction system will be done,and also emittance measurements are being prepared.     

The REX-ISOLDE project

The Radioactive Beam Experiment REX-ISOLDE [1–3] is a pilot experiment at ISOLDE (CERN) testing the new concept of post acceleration of radioactive ion beams by using charge breeding of the ions in a high charge state ion source and the efficient acceleration of the highly charged ions in a short LINAC using modern ion accelerator structures. In order to prepare the ions for the experiments singly charged radioactive ions from the on-line mass separator ISOLDE will be cooled and bunched in a Penning trap, charge bred in an electron beam ion source (EBIS) and finally accelerated in the LINAC. The LINAC consists of a radiofrequency quadrupole (RFQ) accelerator, which accelerates the ions up to 0.3 MeV/u, an interdigital H-type (IH) structure with a final energy between 1.1 and 1.2 MeV/u and three seven gap resonators, which allow the variation of the final energy. With an energy of the radioactive beams between 0.8 MeV/u and 2.2 MeV/u a wide range of experiments in the field of nuclear spectroscopy, astrophysics and solid state physics will be addressed by REX-ISOLDE. This revised version was published online in July 2006 with corrections to the Cover Date.     

用于放射性核束设施驱动加速器的100MeV强流质子回旋加速器

中国原子能科学研究院得到批准建设HI-13串列加速器升级工程, 目前完成了该工程的初步设计.文章报告主工艺设备——100MeV强流质子回旋加速器的设计方案、设计特点, 总体设计结果及主要技术指标、关键设备(离子源、轴向注入线、中心区、主磁铁、高频系统、引出系统、诊断系统等)的简要设计结果等.     

第三代和第四代ECR离子源:未来展望

Since the end of’70s the Electron Cyclotron Resonance ion sources(ECRIS)allowed to increase both the energy and intensity of the beams available from different types of accelerators;perspectives for the future are still optimistic.It is commonly agreed that only some ECRIS parameters have been fully exploited, whether some others are still not efficiently used,or not understood.The developments in the last 20 years have followed the so called Standard Model and the availability of higher frequency generators and higher field magnets have permitted relevant increase;the use of Nb_3Sn may extend the range.The availability of new schemes of microwave coupling to plasma is promising,and the focusing of the electromagnetic wave towards the chamber axis may improve the density of warm electron population.The paper will also describe some critical point of the 3~(rd) generation ECRIS(including technological troubles and limits)and the scenario for future 4~(th) generation ECRIS,operating at f=56—75GHz,to be built in 2010s.     

强流脉冲离子束辐照对不锈钢耐腐蚀性能的影响

利用强流脉冲离子束（HIPIB）对316L不锈钢进行了表面辐照处理,研究了HIPIB辐照对其在0.5mol/L H2SO4溶液中电化学腐蚀性能的影响。极化曲线测量结果表明,HIPIB辐照能够显著提高316L的抗腐蚀性能,自腐蚀电流对辐照次数的依赖性与自腐蚀电位相比明显较强。采用扫描电子显微镜（SEM）、X射线衍射（XRD）和电子探针（EPMA）分析辐照后试样表面形貌、表面层相结构和元素分布的变化。结果表明：HIPIB辐照使试样表面光滑化,表面层产生择优取向,且发生了杂质元素的选择性烧蚀,是316L不锈钢耐电化学腐蚀性能得以提高的主要原因。     

The potential of the superconductor-vacuum-superconductor junction as a mixing element at submillimetre wavelengths

By removing the solid insulator in the superconductor-insulator-superconductor junction and making use instead of the vacuum as the tunnelling medium it should be possible to reduce the junction capacitance by a factor of about ten. This would facilitate the development of tunnelling receivers for submillimetre wavelengths by making it possible to fabricate junctions of normal size with electrical properties appropriate for high-frequency operation.     

The design of a five-cell high-current superconducting cavity

Energy recovery linacs are promising for achieving high average current with superior beam quality. The key component for accelerating such high-current beams is the superconducting radio-frequency cavity. The design of a 1.3 GHz five-cell high-current superconducting cavity has been carried out under cooperation between Peking University and the Argonne National Laboratory. The radio-frequency properties, damping of the higher order modes, multipacting and mechanical features of this cavity have been discussed and the final design is presented.     

新能源变革背景下的超导电力技术发展前景

自从1911年超导体发现以来,人们一直梦想超导体能够在电力技术中得到大规模应用.20世纪60年代以来,随着NbTi超导线材,特别是氧化物高温超导带材达到商业化水平,世界范围内广泛地开展了超导电力技术的研究与应用示范.单从技术上讲,超导电力技术已经接近实用化水平.当今,人类社会正在经历一次新的能源变革,超导电力技术在应对能源变革带来的挑战方面将会发挥重要的作用.文章介绍了近年来超导电力技术的发展趋势,并就其在新能源变革背景下的发展前景进行了探讨.     

The coherency of synchrotron radiation at Pohang Accelerator Laboratory

The coherency of the synchrotron radiation at Pohang Accelerator Laboratory has been investigated using Young's interferometer. The electron beam size can be measured precisely using the interferometer. An interferogram using 650 nm light at the diagnostics beamline at Pohang Light Source (PLS) has been measured to determine the electron beam distribution and the spatial coherence length. Interferograms obtained by numerical study are compared with experimental results in order to understand the measured data. From this comparison, the electron beam at PLS is revealed to be a Gaussian distribution with a standard deviation of 210 µm. The spatial coherency length of 650 nm light at PLS is measured to be 0.57 cm, and that of 0.1 nm light at PLS is predicted to be 0.88 µm by the same numerical study.     

The ALTO project at IPN-Orsay

The availability of both a tandem deuteron beam and a linac electron beam, the latter converted into Bremsstrahlung, at the new ALTO facility at IPN-Orsay offers a unique opportunity to compare the performance of a laser ion guide under different regimes. The ALTO accelerator has delivered its first electron beam at the end of 2005 and a design for a gas-cell prototype is being studied.     

新能源变革背景下的超导电力技术发展前景

自从1911年超导体发现以来,人们一直梦想超导体能够在电力技术中得到大规模应用.20世纪60年代以来,随着NbTi超导线材,特别是氧化物高温超导带材达到商业化水平,世界范围内广泛地开展了超导电力技术的研究与应用示范.单从技术上讲,超导电力技术已经接近实用化水平.当今,人类社会正在经历一次新的能源变革,超导电力技术在应对能源变革带来的挑战方面将会发挥重要的作用.文章介绍了近年来超导电力技术的发展趋势,并就其在新能源变革背景下的发展前景进行了探讨.