Monte Carlo simulation of n-alkane adsorption isotherms in carbon slit pores

The single component adsorption of alkanes in carbon slit pores was studied using configurational-biased grand canonical Monte Carlo simulations. Wide ranges of temperature, pressure, alkane chain length, and slit height were studied to evaluate their effects on adsorption. Adsorption isotherms and density and orientation profiles were calculated. The behavior of long alkanes at high temperatures was found to be similar to short alkanes at lower temperatures. This suggests that the isotherms may be related through the Polanyi potential theory.     

Molecular dynamics simulation of benzene in graphite and amorphous carbon slit pores

It is well known that confining a liquid into a pore strongly alters the liquid behavior. Investigations of the effect of confinement are of great importance for many scientific and technological applications. Here, we present a study of the behavior of benzene confined in carbon slit pores. Two types of pores are considered–graphite and amorphous carbon ones. We show that the effect of different pore structure is of crucial importance for the benzene behavior. © 2013 Wiley Periodicals, Inc.     

Polymolecular adsorption and capillary condensation in narrow slit pores

Capillary condensation and polymolecular adsorption in narrow slits has been calculated, where the fields of surface forces overlap one another. The calculations were carried out on the basis of macroscopic theory of dispersion forces and the isotherms of lone adsorption layers at the free surface. It has been shown that under the effect of mutual attraction through a gap, polymolecular adsorption films lose their stability long before their thickness has approached the half-width of a flat slit. This results in hysteresis of the capillary condensation in an ensemble of plane-parallel slits.

In the case of systems having strong adsorbate-adsorbate interaction, there has been detected the existence of the lower limit of sizes of slit pores, wherein the capillary meniscus can coexist with adsorption films. With a slit width smaller than the critical one, the meniscus is likely to form a finite contact angle with “dry” surfaces of a slit. Thus an explanation has been given of the lower limit of the capillary condensation in an ensemble of flat-surface, slit pores. In the case of strong adsorbate-adsorbent interaction, the coexistence of meniscus with adsorption films within the scope of the approach used is possible in slits of any width.

The value of corrections for the surface forces effect to be entered in the calculations of slit pores dimensions has been analyzed on the basis of the capillary condensation data obtained.

In wedge-shaped slits there also exists, besides lower limit the upper limit of capillary hysteresis.     

Low temperature adsorption of CO2 in carbonaceous wedge pores: a Monte Carlo simulation study

Adsorption - A systematic study of carbon dioxide in wedge pores under subcritical conditions were conducted with Grand Canonical Monte Carlo simulation. The effects of various factors:...     

Gibbs ensemble Monte Carlo simulation of adsorption for model surfactant solution in confined slit pores

An isobaric-isothermal Gibbs ensemble Monte Carlo simulation has been carried out to study the adsorption of a model surfactant/solvent mixture in slit nanopores. The adsorption isotherms, the density distributions, and the configuration snapshots were simulated to illustrate the adsorption and self-assembly behaviors of the surfactant in the confined pores. The adsorption isotherms are stepwise: a two-step curve for the smaller (30 A) pore and a three-step one for the larger (50 A) pore. The adsorption isotherms and the interfacial aggregate structure of the surfactants in the pores with various sizes show a qualitatively consistent performance with the previous experimental observation. The micelle size distributions of the adsorbed surfactant aggregates have been analyzed in order to understand the adsorption mechanism, which suggests that the step rise in the surfactant adsorption is associated with the considerable formation of the micelle aggregates in the confined pores. The effect of the interaction between the pore surface and the surfactant on the adsorption behavior has also been investigated. The simulation results indicate that a change in the interaction can modify the shape of adsorption isotherms. A nonlinear mathematical model was used to represent the multistep adsorption isotherms. A good agreement between the model fitting and the simulation data was obtained for both the amount of adsorption and the jump point concentration.     

Branched versus linear alkane adsorption in carbonaceous slit pores

The presence of carbonaceous deposits on the internal surfaces of a spark ignition engine has been linked in the literature to impaired vehicle performance, as manifested by increased knocking, higher fuel consumption, higher emissions and other adverse effects. One of the proposed mechanisms, in which the deposits affect the processes in the engine, is the adsorption and desorption of fuel components in the pores within the deposit. In this article we investigate this mechanism in more detail by considering single component adsorption of normal and branched alkanes in selected model slit pores representing the structure of the deposits. We further extend these studies to the binary mixture of normal heptane and isooctane, corresponding to a primary reference fuel blend. In particular, we show that in larger pores adsorption selectivity towards isooctane is about 1.2 on average throughout the pressure range. However, in the smaller 10 Å pore selectivity towards isooctane can be in excess of three as a result of packing effects. These results are then placed in the context of engine performance issues.     

Stockmayer流体在活性炭孔中的吸附的分子模拟

应用巨正则系综monteCarlo方法模拟Stockmayer流体[以一氯二氟甲烷(R22)为代表]在活性炭孔中的吸附。模拟中R22分子采用等效Stockmayer势能模型,狭缝碳孔墙采用10-4-3模型。通过模拟得到了最佳孔径,并在最佳孔径下,针对不同的主体压力及活性基团密度,得到了吸附等温线、孔中流体的局部密度分布图和较为直观的孔内流体分子的瞬时构象,分析了吸附等温线的特征及孔内流体的吸附结构,认为在0.0,1.0sites/nm^2的活性基团密度下的碳孔内分别发生物理及化学吸附,并确定了最佳操作压力,为工业设计合适的催化剂提供依据。     

Packing effects on argon and methanol adsorption inside graphitic cylindrical and slit pores: a GCMC simulation study

Using Grand Canonical Monte Carlo simulation, we have studied the effects of confinement on argon and methanol adsorption in graphitic cylindrical and slit pores. Linear chain, zigzag and incomplete helical packing are observed for argon adsorption in cylindrical pores. However, for methanol adsorption different features appear because the electrostatic interactions favour configurations that maximize the hydrogen bonding among methanol molecules. We have found zigzag chains with hydrogen-bonded structures for methanol adsorption in cylindrical and slit pores. To investigate how dense the adsorbed phase is and how many molecules could be packed per unit physical volume of the solid, we consider two different definitions of pore density; one based on the physical volume and the other on the accessible volume. That based on accessible volume gives a measure of the fluid density, while that based on the physical volume gives a measure of how much adsorbate can be stored per unit volume of the adsorbent. It is found that the adsorbate is denser in cylindrical pores, but that slit pores can pack more molecules per unit solid volume. We also discuss the effects on the isosteric heat of argon and methanol of pore size, pore geometry and loading.     

Ultrahigh CO2 adsorption capacity on carbon molecular sieves at room temperature

Although metal-organic framework (MOF) materials have been postulated as superior to any other sorbent for CO(2) adsorption at room temperature, here we prove that the appropriate selection of the raw material and the synthesis conditions allows the preparation of carbon molecular sieves (CMSs) with adsorption capacity, on a volumetric basis, highly exceeding those reported in the literature for MOFs. Furthermore, the excellent sorption properties of CMSs over the whole pressure range (up to 50 bar) are fully reversible after different adsorption/desorption cycles.     

High-pressure adsorption of CO2 on NaY zeolite and model prediction of adsorption isotherms

Supercritical carbon dioxide is an efficient solvent for adsorptive separations because it can potentially be used as both the carrier solvent for adsorption and the desorbent for regeneration. Recent results have demonstrated an anomalous peak or "hump" in the adsorption isotherm near the bulk critical point when the adsorption isotherm is plotted as a function of bulk density. This work presents new data for the adsorption and desorption of carbon dioxide in the near-critical region on a crystalline, well-structured adsorbent (NaY zeolite). The results indicate a strong affinity for CO(2) as well as a significant hump near the critical point. The lattice model previously developed by Aranovich and Donohue is applied to analyze the adsorption.     

Simplified crossover droplet model for adsorption of pure fluids in slit pores

We present a generalized crossover (GC) model for the excess adsorption of pure fluids at a flat solid-liquid interface, which reproduces scaling behavior of the excess adsorption in the critical region and is reduced to the classical, van der Waals-type analytical model far away from the bulk critical point. In developing this model, we used the density-functional theory (DFT) approach for the order parameter profile calculations with a generalized corresponding states model for the local free-energy density. The GC DFT model well represents the available experimental adsorption data for Kr/graphite, C2H4/graphite, C3H8/graphite, CO2/silica, and SF6/graphite systems in the entire density range 0 < rho < or = 3rhoc and temperatures up to 1.7Tc. In the critical region 0.5 rhoc < r < or = 1.5rhoc and T < or = 1.15Tc, the GC DFT model is consistent with the predictions of the asymptotic renormalization-group crossover model for the critical adsorption in a semi-infinite system developed earlier. For the excess adsorption on the critical isochore, both theories predict a scaling-law behavior Gamma proportional tau(-nu+beta), but fail to reproduce a "critical depletion" of the excess adsorption along the critical isochore of the SF6/graphite system near Tc. We show that an anomalous decrease of adsorption observed in this system at tau = T/Tc - 1 < 10(-2) can be explained by finite-size effect and develop a simplified crossover droplet (SCD) model for the excess adsorption in a slit pore. With the effective size of the pore of L = 50 nm, the SCD model reproduces all available experimental data for SF6/graphite, including the critical isochore data where tau-->0, within experimental accuracy. At L > xib (where xib is a bulk correlation length) the SCD model is transformed into the GC DFT model for semi-infinite systems. Application of the SCD model to the excess adsorption of carbon dioxide on the silica gel is also discussed.     

Study of CO2 adsorption in functionalized carbon

We evaluated the ability of CO₂ adsorption in functionalized activated carbons granular and monolithic type, obtained by chemical activation of African palm stone with H₃PO₄ and CaCl₂. We made a comparison between two methods of incorporation of nitrogen groups: the impregnation method with NH₄OH solution and NH₃ gasification. The materials were texturally characterized by N₂ adsorption at 77 K, the isotherms shows obtaining microporous materials with surface areas between 545–1425 m²?g^?1 and pore volumes between 0.22 to 0.53 cm³?g^?1. It was established that with the methodologies used for functionalization is increased content of nitrogen groups, was achieved a higher proportion of such groups when carrying out the process in liquid phase with NH₄OH. The incorporation of nitrogen groups in the material generates an increase of up to 65 % in the CO₂ adsorption capacity of the MCa2 (Monolith prepared with CaCl₂ solution at 2 %) sample. Was reached a maximum adsorption capacity of 344 mgCO²?g^?1 in the MCa2FAL (sample MCa2 functionalized with NH₄OH solution) sample.     

Monte Carlo modeling of chiral adsorption on nanostructured chiral surfaces and slit pores

Adsorptive separation of chiral molecules is a powerful technique that has long been used in the chemical and pharmaceutical industries. An important challenge in this field is to design and optimize new adsorbents to provide selective discrimination of enantiomers. In this article, we introduce an off-lattice model of chiral adsorption on nanostructured surfaces and slit pores with the aim of predicting their enantioslective properties. The concept presented here involves finding the optimal chiral pattern of active sites on the pore walls that maximizes the difference between the binding energies of the enantiomers. Our initial effort focuses on chiral molecules that do not have specific interactions with the pore surface. One candidate meeting this requirement is 1,2-dimethylcyclopropane (DMCP), a chiral hydrocarbon whose interaction with a model pore surface was described using the Lennard-Jones potential. To model the adsorption of DMCP, we used the Monte Carlo simulation method. It was demonstrated that the separation of the enantiomers of DMCP is hardly obtainable because of the smoothness of the potential energy surface for molecules physisorbed in the pore. However, the simulated results allowed the identification of key factors that influence the binding of the enantiomers of DMCP to the pore walls with a special distribution of active sites. This information will be useful in future considerations of the adsorption of more complex chiral molecules.     

Polymer nanodroplets forming liquid bridges in chemically structured slit pores: a computer simulation

Using a coarse-grained bead-spring model of flexible polymer chains, the structure of a polymeric nanodroplet adsorbed on a chemically decorated flat wall is investigated by means of molecular dynamics simulation. We consider sessile drops on a lyophilic (attractive for the monomers) region of circular shape with radius R(D) while the remaining part of the substrate is lyophobic. The variation of the droplet shape, including its contact angle, with R(D) is studied, and the density profiles across these droplets also are obtained. In addition, the interaction of droplets adsorbed on two walls forming a slit pore with two lyophilic circular regions just opposite of one another is investigated, paying attention to the formation of a liquid bridge between both walls. A central result of our study is the measurement of the force between the two substrate walls at varying wall separation as well as the kinetics of droplet merging. Our results are compared to various phenomenological theories developed for liquid droplets of mesoscopic rather than nanoscopic size.     

Quartz crystal microbalance (QCM) in high-pressure carbon dioxide (CO2): experimental aspects of QCM theory and CO2 adsorption

The quartz crystal microbalance (QCM) technique has been developed into a powerful tool for the study of solid-fluid interfaces. This study focuses on the applications of QCM in high-pressure carbon dioxide (CO2) systems. Frequency responses of six QCM crystals with different electrode materials (silver or gold) and roughness values were determined in helium, nitrogen, and carbon dioxide at 35-40 degrees C and at elevated pressures up to 3200 psi. The goal is to experimentally examine the applicability of the traditional QCM theory in high-pressure systems and determine the adsorption of CO2 on the metal surfaces. A new QCM calculation approach was formulated to consider the surface roughness contribution to the frequency shift. It was found that the frequency-roughness correlation factor, Cr, in the new model was critical to the accurate calculation of mass changes on the crystal surface. Experiments and calculations demonstrated that the adsorption (or condensation) of gaseous and supercritical CO2 onto the silver and gold surfaces was as high as 3.6 microg cm(-2) at 40 degrees C when the CO2 densities are lower than 0.85 g cm(-3). The utilization of QCM crystals with different roughness in determining the adsorption of CO2 is also discussed.     

Synthesis,characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity

Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. To improve the CO₂ adsorption efficiency, ONCs were chemically activated to obtain high specific surface area and micro-/mesopore volume with different KOH amounts (i.e., 0, 1, 2, 3, and 4) as an activating agent. The prepared nanoporous carbons (NCs) materials were analyzed by low-angle X-ray diffraction for confirmation of synthesized ONCs structures. The structural properties of the NCs materials were analyzed by high-angle X-ray diffraction. The textural properties of the NCs materials were examined using the N₂/77 K adsorption isotherms according to the Brunauer–Emmett–Teller equation. The CO₂ adsorption capacity was measured by CO₂ isothermal adsorption at 298 K/1 bar. From the results, the NCs activated with KOH showed that the increasing specific surface areas and total pore volumes resulted in the enhancement of CO₂ adsorption capacity.     

Density functional theory of adsorption in pillared slit-like pores

We propose a density functional theory to describe adsorption of Lennard-Jones fluid in pillared slit like pores. Specifically, the pillars are built of chains that are bonded by their ends to the opposite pore walls. The approach we propose combines theory of quenched-annealed systems and theory of nonuniform fluids involving chain molecules. We compare the results of theoretical predictions with grand canonical ensemble Monte Carlo simulations and compute theoretical capillary condensation phase diagrams for several model systems.     

CO2 adsorption by nitrogen-doped carbon nanotubes predicted by density-functional theory with dispersion-correcting potentials

The interaction of CO(2) to the interior and exterior walls of pristine and nitrogen-doped single-walled carbon nanotubes (SWNT) has been studied using density-functional theory with dispersion-correcting potentials (DCPs). Our calculations predict Gibbs energies of binding between SWNT and CO(2) of up to 9.1 kcal mol(-1), with strongest binding observed for a zigzag [10,0] nanotube, compared to armchair [6,6] (8.3 kcal mol(-1)) and chiral [8,4] (7.0 kcal mol(-1)). Doping of the [10,0] tube with nitrogen increases the Gibbs energies of binding of CO(2) by ca. 3 kcal mol(-1), but slightly reduced binding is found when [6,6] and [8,4] SWNT are doped in similar fashion. The Gibbs energy of binding of CO(2) to the exterior of the tubes is quite small compared to the binding that occurs inside the tubes. These findings suggest that the zigzag SWNT show greater promise as a means of CO(2) gas-capture.