Isothermal bulk polymerization ofp-alkylaryl methacrylates by DSC

The course and kinetics of free radical polymerization in bulk ofp-alkylphenyl methacrylates with AIBN initiator were studied by DSC, in the temperature range 348–373 K. The enthalpy of polymerization, the residual monomer content, as well as the overall reaction rate constants and the activation energies were determined. The similar values of the overall rate constants indicate that the relatively small alkyl substituents inp-position of the phenyl ring affect the polymerization rate to a very small, if any, extent.

---

Zusammenfassung Mittels DSC wurden im Temperaturbereich 348–373 K Reaktionsweg und Kinetik der radikalischen Raumpolymerisation vonp-Alkylphenylmethacrylaten mit AIBN Initiator untersucht. Dabei wurden die Polymerisationsenthalpie, der Monomerrest-gehalt als auch die Geschwindigkeitskonstanten und die Aktivierungsenergien der Gesamt-reaktion bestimmt. Ähnliche Werte für die Gesamtgeschwindigkeitskonstanten weisen darauf hin, daß die relativ kleinen Alkylsubstituenten inp-Stellung des Phenylringes die Polymerisationsgeschwindigkeit nur in sehr kleinem Maße — wenn überhaupt — beeinflussen.

     

DSC investigation of isothermal bulk copolymerization of alkylaryl methacrylates

The free radical copolymerization of phenyl methacrylate (PhMA) witho-methylphenyl-methacrylate(o-MPhMA) ando-ethylphenyl methacrylate (o-EPhMA) was carried out and the enthalpies of copolymerization, overall rate constants and copolymerization parameters were determined for different molar ratios of comonomers in the temperature range 353–373 K.     

Kinetics of radical polymerization of dimethylphenyl methacrylates

The kinetics of free radical polymerization of all six existing isomeric dimethylphenyl methacrylates were studied in bulk at 60°C, initiated by dilauroyl peroxide, using dilatometry. The different polymerization rates observed, resulting from the different monomer structures, are discussed in terms of steric and other effects, considering also the previous results for tolyl methacrylates. © 1993 John Wiley & Sons, Inc.     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

DSC analysis of compatibility of poly(phenyl methacrylate) and some poly(xylenyl methacrylates)

Glass transition temperatures of blends of (1) poly-(phenyl methacrylate) and poly(2,3-xylenyl methacrylate), (2) poly-(phenyl methacrylate) and poly(2,6-xylenyl methacrylates and (3) poly-(2,3-xylenyl-) and poly(2,6-xylenyl methacrylate) were measured. The data obtained suggest the existance of compatibility for blends of poly(xylenyl methacrylates) mentioned and incompatibility for both poly(phenyl methacrylate)/poly(xylenyl methacrylate) systems.     

The effect of feed conditions in the emulsion catalytic chain transfer polymerization of alkyl methacrylates

([bis[μ-[(2,3-butanedione dioximato)(2-)-O:O′]] tetrafluorodiborato(2-)-N,N′,N″,N‴] cobalt), CoBF, has been used for the effective catalytic chain transfer of alkyl methacrylate homo- and copolymers under emulsion polymerization conditions. The catalytic chain transfer process reduces the rate of polymerization such that when the monomer is fed over 60 min the instantaneous conversion is low enough for the particle to be swollen with monomer, allowing diffusion of the catalysts between the aqueous and monomer phases. When the amount of the catalyst is reduced, the rate is increased, eventually leading to viscous, glassy particles that prevent catalyst mobility, which is observed as a breakdown in the polymerization mechanism. This can be circumvented by the addition of a 20% shot of monomer at the start of the reaction. The effective chain transfer coefficient decreases on increasing the length of the ester group of the methacrylate. The analysis of the polymers made by the technique described shows that the T_g of the polymers observe a broad transition due to the effect of chain length being pronounced at low molecular mass. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3549–3557, 1999     

Studies on bulk polymerization of methyl methacrylate. I. Thermal polymerization

The thermal bulk polymerization of methyl methacrylate (MMA) in a wide range of temperatures has been studied using a dilatometric reactor. It is shown that, irrespective of the care taken to purify the MMA, the evolution of the time-conversion curve can be explained only if we account for the presence of an impurity associated with the monomer acting as a free radical initiator. The activation energy for the decomposition of this impurity has been estimated as 98 kJ/mol. Having accounted for this impurity, the activation energy for the real thermal polymerization of the MMA has been estimated to be 75 kJ/mol. © 1993 John Wiley & Sons, Inc.     

Synthesis of bio-based poly(methacrylates) using SG1-containing amphiphilic macroinitiators by nitroxide mediated miniemulsion polymerization

SG1-based amphiphilic macroinitiators were synthesized from oligoethylene glycol methyl ether methacrylate and 10 mol% acrylonitrile or styrene (as the controlling comonomer) to conduct the nitroxide mediated polymerization of bio-based methacrylic monomers (isobornyl methacrylate (IBOMA) and C13 alkyl methacrylate (C13MA)) in miniemulsion. The effect of the addition of surfactant (DOWFAX 8390), co-stabilizer (n-hexadecane) and different reaction temperatures (80, 90 and 100°C) on polymerization kinetics was studied. We found that the NMP of IBOMA/C13MA using amphiphilic macroalkoxyamines were most effective during miniemulsion polymerization (linear trend of M_n versus conversion and high latex stability) in presence of 2 wt% surfactant and 0.8 wt% co-stabilizer (relative to monomer) at 90°C. The effect of surfactant, co-stabilizer and temperature on particle size during the polymerization was studied and suggested a decrease in initial particle size with the addition of surfactant and co-stabilizer. Finally, the thermal properties of IBOMA/C13MA polymers, prepared by amphiphilic macroinitiators, were examined thoroughly, indicating a T_g in the range of −44°C < T_g < 109°C.     

Ylide mediated polymerization of methacrylates and acrylates in the presence of tetraphenylphosphonium cation 3

Triphenylmethide tetraphenylphosphonium (TPM, TPP) or methylisobutyrate tetraphenylphosphonium (MIB, TPP) formed by ion exchange reactions of TPP chloride(TPPCl) with the TPM or MB potassium salts in THF, initiate the living polymerization of MMA producing PMMA's with narrow MW distributions (below 1.3) at ambient temperatures.     

Effects of 2‐hydroxyalkyl methacrylates on the styrene miniemulsion polymerizations stabilized by SDS and alkyl methacrylates

The effects of 2‐hydroxyalkyl methacrylates (HEMA and HPMA) on the styrene miniemulsion polymerizations stabilized by SDS/lauryl methacrylate (LMA) or SDS/stearyl methacrylate (SMA) were investigated. A mixed mode of particle nucleation (monomer droplet nucleation and homogeneous nucleation) is operative during polymerization. Homogeneous nucleation plays a crucial role in the polymerizations stabilized by SDS/LMA, whereas monomer droplet nucleation becomes more important in the polymerizations stabilized by SDS/SMA. The polymerization kinetics is insensitive to the type of 2‐hydroxyalkyl methacrylates, but the difference in the relative importance of monomer droplet nucleation and homogeneous nucleation is detected. Incorporation of 1‐pentanol (C₅OH) into the reaction mixture also shows a significant influence on the polymerizations stabilized by SDS/LMA or SDS/SMA. This is attributed to the formation of a close‐packed structure of SDS and C₅OH on the droplet surface, which acts as a barrier to the incoming oligomeric radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3188–3199, 2000     

Highly isotactic polymethacrylates through radical polymerization of methacrylate esters of some ortho‐bridged triaryl carbinols

The polymerization of 9‐phenyl‐10,10‐dioxo‐thioxanthen‐9‐yl and 9‐phenyl‐10‐oxo‐9,10‐dihydroanthracen‐9‐yl methacrylates obtained under radical initiation (α,α‐azobisisobutyronitrile) in benzene solution proceeds with high isotactic specificity to afford homopolymers with a triad mm content higher than 95%, having presumably a helical main‐chain structure and showing significant resistance to solvolytic degradation in methanol. 9‐Phenyl‐10,10‐dipropyl‐9,10‐dihydroanthracen‐9‐yl methacrylate similarly affords isotactic polymers with an mm of 98% but is much less durable in contact with methanol. The high isotacticity observed for the aforementioned polymethacrylates as well as for poly(1‐phenyl‐dibenzosuberyl methacrylate), previously reported in the literature, reveal a tendency of ortho‐bridged triarylcarbinols to enforce isotacticity on their methacrylate polymers obtained under radical initiation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1180–1186, 2001     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Miniemulsion polymerization of styrene using alkyl methacrylates as the reactive cosurfactant

 Stable styrene miniemulsions were prepared by using alkyl methacrylates as the reactive cosurfactant. Like conventional cosurfactants (e.g., cetyl alcohol (CA) and hexadecane (HD)), alkyl methacrylates (e.g., dodecyl methacrylate (DMA) and stearyl methacrylate (SMA)) may act as a cosurfactant in stabilizing the homogenized miniemulsions. Furthermore, the methacrylate group may be chemically incorporated into latex particles in subsequent miniemulsion polymerization. The data of the monomer droplet size, creaming rate and phase separation of monomer as a function of time were used to evaluate the shelf-life of miniemulsions stabilized by sodium dodecyl sulfate in combination with various cosurfactants. Polystyrene latex particles were produced via both monomer droplet nucleation and homogeneous nucleation in the miniemulsion polymerization using CA or DMA as the cosurfactant, with the result of a quite broad particle size distribution. On the other hand, the miniemulsion polymerization with HD or SMA showed a predominant monomer droplet nucleation. The resultant particle size distribution was relatively narrow. In miniemulsion polymerization, the less hydrophobic DMA is similar to CA, whereas the more hydrophobic SMA is similar to HD. Received: 19 November 1996 Accepted: 20 February 1997     

Synthesis and radical polymerization of hydrophilic methacrylates with oxyethylene units in the pendant chain

The syntheses of methacrylic monomers of the general structure where n is 3, 4, 5, or 6, were performed by the reaction of the corresponding alcohol ethers with methacryloyl chloride. The alcohol ethers were previously prepared by different synthetic procedures involving the monoetherification of the starting glycols. The polymerizations kinetics of the monomers were examined at several temperatures in the bulk and in dioxane solutions. NMR spectroscopy and electron paramagnetic resonance techniques were used to study the kinetics of polymerization. The polymerization rate parameter, expressed as (2f)^1/2k_p/〈k_t〉^1/2, and the values of the propagation rate coefficient k_p and the termination rate coefficient 〈k_t〉/f, where f is the efficiency factor of the initiator, were determined. The reactivity of the monomers depended on the size of the ester residue in such a way that the longer the lateral chain was, the higher the polymerization rate was and the lower the termination rate coefficient was. On the contrary, the dependence of k_p on the chemical structure was very small. In the solution polymerizations of all these monomers (monomer concentration = 1 mol L^?1), the radical concentrations remained almost constant until very high conversions, whereas in the bulk, a different behavior was observed that depended on the number of oxyethylene units in the side chain of the monomer. In this sense, for n = 4, 5, or 6, the radical concentration remained almost invariable with the reaction time, whereas for n = 3, a moderate increase occurred at low conversions, contrasting with the important increase observed at similar conversions for n = 1. This showed that the gel effect in these methacrylic monomers was greatly dependent on the number of bonds of the lateral chain. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1567–1579, 2003     

Stereospecific polymerization of methacrylates by metallocene and related catalysts

Stereospecific—isospecific, syndiospecific, and diastereospecific—polymerizations of methacrylates using group 4 metallocene and related catalysts produce polymethacrylates with controlled stereo‐microstructures. The versatility and stereospecificity of these cat‐ alysts for methyl methacrylate polymerization were demonstrated not only in solution‐phase polymerization, but also in polymerizations on silica surfaces and inside silicate nanogalleries. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3395–3403, 2004     

Synthesis and characterization of multiarm (Benzoin-PS)m-polyDVB star polymer as a polymeric photoinitiator for polymerization of acrylates and methacrylates

In this study, a new benzoin-based multi-arm star polymer was synthesized by using ATRP, and characterization was achieved by spectrophotometric and chromatographic methods. Obtained multiarm (Benzoin-PS)_m-polyDVB star polymer was employed as a polymeric photoinitiator for polymerization of methacrylates and acrylates. Photophysical properties of this initiator were determined by fluorescence and phosphorescence measurements, the phosphorescence lifetime was calculated as 29 ms hence the lowest triplet state nature was n-π* character, and laser flash photolysis technique was additionally used to get more information about triplet state and triplet lifetime which was calculated as 1.34 ms. Photokinetics of difunctional acrylate such as HDDA was studied with a multi-arm (Benzoin-PS)_m-polyDVB star polymeric initiator using Photo-DSC.     

Anionic polymerization of methacrylates by samarium (III) enolate on networked polystyrene: Effects of its sterically confined environment on polymerization behavior

Anionic polymerization of methacrylates under sterically confined environment in a spherical beads‐shaped networked polystyrene (NwPS) matrix is described. The initiator used herein is a samarium (Sm) (III) enolate, which was formed by treatment of 2‐bromoisobutylate immobilized in the side chain of NwPS with Sm (II) iodide. By using this NwPS‐bound initiator, polymerization of a series of methacrylates (=solid‐supported polymerization) was studied to find its two aspects: (1) In the early stages, the rate constant for each methacrylate was comparable to that for its conventional solution‐phase polymerization using a Sm (III) enolate, suggesting that methacrylate can be efficiently supplied to the propagating end by its free permeation without any interference by the networked structure of the matrix. (2) After the early stages, the rate constant decreased remarkably, implying that permeation of methacrylate was sterically interfered by the formed poly(methacrylate) that filled the confined space in NwPS, as supported by a SEM image of the resulting beads, of which pores were filled with the formed polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1510–1521, 2009     

Composite cure kinetic analysis of unsaturated polyester free radical polymerization

Curing kinetics of unsaturated polyester resin system exhibiting apparent induction periods was investigated by modeling free radical initiation and propagation processes. The isothermal curing induction time as well as the maximum-rate time provided the same activation energy in the Arrhenius relation, and therefore, the isothermal curing master curve was constructed by using the reduced time method. Two model elementary rate equations for radical and monomer were proposed to describe the free radical polymerization of unsaturated polyester resin systems. The power law was adopted to express the conversion dependence function of the initiation efficiency and the monomer reaction rate. Demonstrating the capability of the developed model, the agreement between experimental and predicted data was excellent in both isothermal and dynamic-heating conditions, even with the same model parameters in different thermal conditions. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2447–2456, 1997