新型1,8-萘酰亚胺类化合物与DNA相互作用的研究

用荧光光谱、紫外光谱、粘度法对两种新型1,8-萘酰亚胺类化合物N-羟乙基-3-硝基-4-溴-1,8-萘酰亚胺(B)和N-羟乙基-4-羟乙基-3-硝基-1,8-萘酰亚胺(N)与DNA的相互作用进行了研究,考察和比较了它们与DNA的作用模式和强度,求出了两种化合物的嵌入常数。结果表明,化合物N和B主要以插入方式与DNA作用,且化合物N与DNA的作用强于化合物B。     

新型三嗪桥连的双1,8-萘酰亚胺衍生物的合成及其光物理行为

以1,8-萘酰亚胺和三聚氯氰为主要原料, 合成了两种由三嗪环桥连的双1,8-萘酰亚胺化合物3 和5. 采用紫外-可见光谱和荧光光谱等手段考察了两种化合物在不同溶剂中的光物理行为. 与参比化合物N-丁基-1,8-萘酰亚胺相比, 在二氯甲烷、三氯甲烷和甲醇等极性溶剂中, 化合物3和5除了在短波区(λ<400 nm)存在1,8-萘酰亚胺的特征荧光发射峰外, 在长波区(>450 nm)均产生一个较强的新荧光发射峰, 表现出分子内激基缔合物的光物理行为. 与化合物5相比, 由于化合物3特殊的构象异构, 其荧光强度发生严重的猝灭. 在非极性溶剂甲基环己烷中, 化合物5 由于存在较强的分子间氢键作用而聚集, 受激后形成了较稳定的分子间激基缔合物, 但未观察到明显的分子内激基缔合物的形成. 在甲苯溶剂中, 化合物3和5与甲苯分子形成了激基复合物, 并未形成分子内激基缔合物. 进一步研究3和5的固态激发态性质, 发现化合物3和5的固体薄膜受激后分别在465和469 nm处出现激基缔合物的特征荧光发射峰.     

1,8-萘酰亚胺衍生物的设计、合成及其对半胱氨酸的识别研究

巯基氨基酸水平异常与多种疾病相关,其检测仍存在一定的局限,研究检测巯基氨基酸的荧光探针具有一定的价值.以苊为原料合成了61个1,8-萘酰亚胺衍生物,研究了该类化合物的荧光性能及其作为半胱氨酸含量测定的荧光探针的可能性.紫外光谱分析表明1,8-萘酰亚胺衍生物上N-取代基对最大吸收波长无明显影响;荧光光谱(FL)的性能测试显示硝基萘酰亚胺衍生物N-甲基-4-硝基-1,8-萘二甲酰亚胺(4a)～4-硝基-N-间氟苯基-1,8-萘二甲酰亚胺(4s)无荧光,氨基萘酰亚胺衍生物N-甲基-4-氨基-1,8-萘二甲酰亚胺(5a)～4-氨基-N-间氟苯基-1,8-萘二甲酰亚胺(5s)有强烈黄色荧光,而马来酰亚胺萘酰亚胺衍生物N-甲基-4-(1H-吡咯-2,5-二酮-1-基)-1,8-萘二甲酰亚胺(6a)～4-(1H-吡咯-2,5-二酮-1-基)-N-(间氟苯基)-1,8-萘二甲酰亚胺(6s)有微弱蓝色荧光,其中7个马来酰亚胺萘酰亚胺衍生物探针对半胱氨酸(Cys)溶液有荧光点亮效应.对7个探针加入21种其它氨基酸作为干扰项的测试显示探针对半胱氨酸检测有良好的选择性.研究了不同pH值下荧光强度,检测探针与半...     

水溶性萘酰亚胺树形分子的合成及其荧光探针性质

合成了2个水溶性萘酰亚胺树形分子叔丁氧基羰基-{N,N-双{4-{{5-(4-叔丁基苯基)-[1,3,4]-噁二唑}-2-苯基}-乙烯基-1,8-萘酰亚胺}-乙氨基羰乙基}乙二胺(DON)和4-哌啶基-9-乙氨基-{N,N-双{4-{{5-(4-叔丁基苯基)-[1,3,4]-噁二唑}-2-苯基}-乙烯基-1,8-萘酰亚胺}-乙氨基羰乙基}乙氨基-1,8-萘酰亚胺(DOPN).并通过核磁氢谱、核磁碳谱及高分辨质谱结构表征.测定了DON及DOPN的固体、纯THF及水溶液中的荧光光谱,实验发现暗室中紫外灯下固体DON和DOPN发出橘黄色荧光,最大发射波长分别为566和561 nm.在四氢呋喃(THF)溶液中发出蓝绿色荧光,最大吸收波长为360和395 nm,最大发射波长为489和492 nm,荧光量子产率为28.2%和20.4%.水溶液中最大吸收波长为367和408 nm,最大发射波长为563和552 nm.测定了DON和DOPN与Hela细胞共同孵化后在共聚焦荧光显微镜下的细胞成像.研究了DON对Sn2+的选择性识别实验,研究发现,Sn2+对DON有选择性荧光增强,Sn2+与DON配位数为2.萘酰亚胺树形分子DON和DOPN可溶于水,具有聚集诱导发光(AIE)性质,是一种优良的Sn2+荧光探针,可广泛应用于肿瘤定位、药学研究、荧光显微技术及纳米材料研究的应用等重要领域.     

新型萘酰亚胺衍生物的合成

N-(N’,N’-二甲基氨基乙基)-4-硝基-1,8-萘酰亚胺和2,3-二甲基苯并噻唑碘化盐在痕量水存在下经亲核取代反应合成了一个新型的萘酰亚胺衍生物——N-(N’,N’-二甲基氨基乙基)-4-[2-(2,3-二氢-2,3-二甲基苯并噻唑)氧基]-1,8-萘酰亚胺,其结构经1H NMR,13C NMR和ESI-MS表征。并对反应机理进行了初步研究。     

N-(1-萘基)-琥珀酰亚胺光谱性质与构象的计算机模拟

首次采用Materialsstudio软件中不同的交换-相关势能函数对N-(1-萘基)-琥珀酰亚胺进行密度泛函理论计算,通过与文献报道的B3LYP/6-311G**常规计算方法进行比较,以及MP2/6-311G**方法进行单点能计算,确认所采用方法计算N-(1-萘基)-琥珀酰亚胺分子最低能量构象更接近整个势能面的全局最小点;振动频率理论分析结果与N-(1-萘基)-琥珀酰亚胺化合物羰基振动双重分裂的红外光谱特征相吻合,表明红外光谱可以作为琥珀酰亚胺类化合物的重要表征方法;根据对N-(1-萘基)-琥珀酰亚胺、萘和萘胺的轨道分布和电荷密度进行理论分析,解释了N-(1-萘基)-琥珀酰亚胺化合物溶液的紫外和荧光的光谱特征,并进而可推断N-(1-萘基)-琥珀酰亚胺分子在溶液中的构象和理论计算得到的真空中最低能量构象相同,其二面角为94.995°。     

1,8-萘酰亚胺修饰的卟啉及其作为F-识别化学传感器的研究

合成了新型的具有识别F-能力的1,8-萘酰亚胺修饰的卟啉化合物,在F-的作用下,紫外-可见光谱和荧光光谱都发生明显的变化,而且可以被肉眼识别,该传感器可以作为具有F-选择性的比色和荧光化学传感器。     

新型含两个西佛碱单元的1，8-萘酰亚胺衍生物的合成及其光学性能

以4-溴-1,8-萘酐和取代醛为起始原料,合成了一系列新颖的含两个西佛碱单元的1,8-萘酰亚胺衍生物--双芳香醛缩N-氨基4-肼基-1,8-萘酰亚胺(5a～51),其结构经1H NMR,IR和元素分析确证.研究了5在乙腈中的紫外-可见和荧光发射光谱.结果表明5在520 nm～570nm内发光.     

D-1-A分子修饰罗丹明底环及对其激发态的影响

通过乙基桥把供电子基团1,8-萘酰亚胺与罗丹明底环羧酸基相连,得到了两种以D-1-A（Donor-Acceptor-Linealkanescompounds）分子修饰罗丹明底环的化合物,并就合成中间体D-π-A（Donor-Acceptor-Tt-conjugatedcompounds）分子中哌嗪供电子基取代溴对1,8-萘酐母体基态和激发态的影响,以及对D-1-A分子修饰罗丹明底环对罗丹明母体D-π-A分子紫外可见吸收光谱和激发态的影响进行了研究。结果表明：用D-1-A分子修饰罗丹明底环时,D（Donorcompound）的给电子能力越强,其吸收强度越大,其吸收紫外光而激发能力越强;在激发态下D-1-A体系发生了分子内能量传递,萘酰亚胺基团发生强烈的荧光猝灭,罗丹明底环接收能量激发罗丹明母体（D-π-A分子）发射特征荧光,D的给电子能力越强,其荧光强度越高。     

新型双发色团固体激光染料薄膜的光稳定性研究

利用UV-Vis吸收光谱仪和光化学反应器研究了新型双发色团固体激光染料薄膜的光降解动力学.研究结果表明:双发色团固体激光染料薄膜的光褪色反应遵循假一级动力学衰减.在PRNAM系列共聚物(N-烯丙基-若丹明1、N-[(2-丙烯酸基)乙基]-1,8-萘酰亚胺和甲基丙烯酸甲酯的共聚物)中萘酰亚胺基团通过聚合物碳链与若丹明基团的氮原子相连;而在PRNM系列共聚物(若丹明1的烯丙基酯、N-[(2-丙烯酸基)乙基]-1,8-萘酰亚胺和甲基丙烯酸甲酯的共聚物)中则是与若丹明基团的酯基相连.PRNAM系列共聚物的光稳定性优于PRNM和PRM(若丹明1的烯丙基酯和甲基丙烯酸甲酯的共聚物)系列的光稳定性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.