Removal of Oil Spills from Salty Waters by Commercial Organoclays

In this study two commercial organoclays, Cloisite 15A and Cloisite 30B, were used to investigate their potential for removing of light and heavy crude oils from salty waters. The results of batch kinetic studies indicated that the equilibrium time can be reached within 25–30 minutes of contact time. In addition experiments were performed to determine the effect of salinity, temperature, pH and mixing time on the adsorption process. The adsorption isotherms were obtained for the crude oils at equilibrium, at an optimum pH value of 11.73 and temperature of 19°C for which the initial oil contents varied in the range of 100 to 2000 ppm. Experimental results showed that oil sorption onto these organoclays can be described by Freundlich isotherm. Further, it was found that the oil removal efficiency for Cloisite 30B is higher than that of Cloisite 15A and the greater sorption was observed for Gachsaran crude oil onto the organoclays over Soroosh crude oil.     

Adsorption of p-nitrophenol on organoclays

In this study, organoclays were prepared through ion exchange of a single cationic surfactant, hexadecyltrimethylammonium bromide and characterised by a range of methods including X-ray diffraction (XRD) and thermogravimetric analysis. Changes in the surface properties of montmorillonite and the organoclays were observed and the basal spacings of organoclays with and without p-nitrophenol were determined using XRD. The thermal stability of both organoclays were measured using thermogravimetry. As the surfactant loading increased, the expanded basal spacings were observed, and different molecular configurations of surfactant were identified. When the surfactant loading exceeded 1.0 CEC, surfactant molecules tend to adsorb strongly on the clay surface and this resulted in increased affinity to organic compounds. The adsorbed p-nitrophenol and the surfactant decomposed simultaneously. Hence, the surfactant molecules and adsorbed p-nitrophenol are important in determining the thermal stabilities of organoclays. This study enhances the understanding of the structure and adsorption properties of organoclays and has further implications for the application of organoclays as filter materials for the removal of organic pollutants in aqueous solutions.     

Thermal stability of octadecyltrimethylammonium bromide modified montmorillonite organoclay

Organoclays are significant for providing a mechanism for the adsorption of organic molecules from potable water. As such their thermal stability is important. A combination of thermogravimetric analysis and infrared emission spectroscopy was used to determine this stability. Infrared emission spectroscopy (IES) was used to investigate the changes in the structure and surface characteristics of water and surfactant molecules in montmorillonite, octadecyltrimethylammonium bromide and organoclays prepared with the surfactant octadecyltrimethylammonium bromide with different surfactant loadings. These spectra collected at different temperatures give support to the results obtained from the thermal analysis and also provide additional evidence for the dehydration which is difficult to obtain by normal thermoanalytical techniques. The spectra provide information on the conformation of the surfactant molecules in the clay layers and the thermal decomposition of the organoclays. Infrared emission spectroscopy proved to be a useful tool for the study of the thermal stability of the organoclays.     

Synthesis, characterization of mono, di and tri alkyl surfactant intercalated Wyoming montmorillonite for the removal of phenol from aqueous systems

Organoclays were synthesized by the ion exchange of cationic surfactants containing single, double and triple alkyl chains for sodium ions in an aqueous suspension of Wyoming Na-montmorillonite. The characterization of organoclays with and without adsorbed phenol was determined by X-ray diffraction, TEM and thermal analysis. Differences in the surfaces and in the interlayer of the mono, di and tri alkyl chain organoclays resulted in differences in the adsorption efficiency for phenol with tri > di > mono > Na-Mt. The results prove that organoclays can be effective for the removal of phenol from an aqueous solution and this removal is a function of the surfactant molecule and its concentration. In general, the higher the concentration as measured by the CEC value and the greater the number of alkyl chains in the surfactant molecule, the greater the percentage of the phenol that is removed.     

Characterisation of organoclays and adsorption of p-nitrophenol: environmental application

Organoclays were synthesised through ion exchange of a single surfactant for sodium ions, and characterised by a range of method including X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM). The change in surface properties of montmorillonite and organoclays intercalated with the surfactant, tetradecyltrimethylammonium bromide (TDTMA) were determined using XRD through the change in basal spacing and the expansion occurred by the adsorbed p-nitrophenol. The changes of interlayer spacing were observed in TEM. In addition, the surface measurement such as specific surface area and pore volume was measured and calculated using BET method, this suggested the loaded surfactant is highly important to determine the sorption mechanism onto organoclays. The collected results of XPS provided the chemical composition of montmorillonite and organoclays, and the high-resolution XPS spectra offered the chemical states of prepared organoclays with binding energy. Using TGA and FT-IR, the confirmation of intercalated surfactant was investigated. The collected data from various techniques enable an understanding of the changes in structure and surface properties. This study is of importance to provide mechanisms for the adsorption of organic molecules, especially in contaminated environmental sites and polluted waters.     

Sorption of nonionic organic solutes from water to tetraalkylammonium bentonites: Mechanistic considerations and application of the Polanyi-Manes potential theory

This work describes the role of quaternary alkylammonium amendment length on sorption mechanisms of modified bentonites for four nonionic organic compounds; benzene, carbon tetrachloride, TCE, and 1,2-DCB. Tetramethyl to tetrabutyl alkyl amendments were studied and an important mechanistic shift occurred at the propyl chain length for all four solutes studied. Three- and four-carbon-chain functional groups on the ammonium cation resulted in a linear, rather than a curvilinear isotherm. The uptake on tetrapropyl and tetrabutylammonium clays was noncompetitive in binary systems and showed negligible sensitivity to temperature variations, indicating the linear isotherms describe a partitioning uptake mechanism for these organoclays. The adsorptive organoclays (tetramethyl and tetraethylammonium clays) were fit with the Dubinin-Radushkevich equation to investigate the application of the Polanyi-Manes potential theory to organoclay adsorption. It was found that TCE and carbon tetrachloride, with similar physical and chemical characteristics, behaved according to the Polanyi-Manes theory. Benzene showed an anomalously high adsorption volume limit, possibly due to dense packing in the adsorption space or chemisorption to the short chain alkyl groups.     

Comparison Between Long- and Short-Chain Organoclays for Oil Removal from Salty Waters

Two commercial powdered organoclays, Cloisite 15A and Cloisite 30B, as long-chain organoclays, and two organically modified clays with tetramethylammonium chloride (TMA-clay), as short-chain organoclays were used in this study to investigate their potentials for crude oil removal from salty waters. Batch experiments were performed to examine the effect of contact time and pH on the adsorption process. The results showed that the equilibrium time was reached within 25–30 and 50–55 minutes of contact time for long and short-chain organoclays, respectively. In addition, adsorption isotherms were obtained at an optimum pH value of 11.73 and temperature of 19°C for which initial oil contents varied in the range of 100 to 2000 ppm. Experimental results indicated that the sorption of oil onto Cloisite 15A, Cloisite 30B and the organically modified clays can be described by Freundlich isotherm and oil sorption followed the order of modified Cloisite Na > Cloisite 30B > Cloisite 15A > a modified local clay.      

Intercalation of a nonionic surfactant (C10E3) bilayer into a Na-montmorillonite clay

A nonionic surfactant, triethylene glycol mono-n-decyl ether (C(10)E(3)), characterized by its lamellar phase state, was introduced in the interlayer of a Na-montmorillonite clay at several concentrations. The synthesized organoclays were characterized by small-angle X-ray scattering in conjunction with Fourier transform infrared spectroscopy and adsorption isotherms. Experiments showed that a bilayer of C(10)E(3) was intercalated into the interlayer space of the naturally exchanged Na-montmorillonite, resulting in the aggregation of the lyotropic liquid crystal state in the lamellar phase. This behavior strongly differs from previous observations of confinement of nonionic surfactants in clays where the expansion of the interlayer space was limited to two monolayers parallel to the silicate surface and cationic surfactants in clays where the intercalation of organic compounds is introduced into the clay galleries through ion exchange. The confinement of a bilayer of C(10)E(3) nonionic surfactant in clays offers new perspectives for the realization of hybrid nanomaterials, since the synthesized organoclays preserve the electrostatic characteristics of the clays, thus allowing further ion exchange while presenting at the same time a hydrophobic surface and a maximum opening of the interlayer space for the adsorption of neutral organic molecules of important size with functional properties.     

A thermoanalytical assessment of an organoclay

High resolution thermogravimetric analysis (TG) has attracted much attention in the synthesis of organoclays and its applications. In this study, organoclays were synthesised through ion exchange of a single cationic surfactant for sodium ions, and characterised by methods including X-ray diffraction (XRD) and TG. The changes of surface properties in montmorillonite (MMT) and organoclays intercalated with surfactant were determined using XRD through the changes in the basal spacing. The TG was applied in this study to investigate more information of the configuration and structural changes in the organoclays with thermal decomposition. There are four different decompositions steps in differential thermogravimetric curves. The obtained TG steps are relevant to the arrangement of the surfactant molecules intercalated in MMT and the thermal analysis indicates the thermal stability of surfactant modified clays. This investigation provides new insights into the properties of organoclays and is important in the synthesis and processing of organoclays for environmental applications.     

Desorption of stearic acid upon surfactant adsorbed montmorillonite

Thermal analysis and differential thermal analysis offers a novel means of studying the desorption of acids such as stearic acid from clay surfaces. Both adsorption and chemisorption can be distinguished through the differences in the temperature of mass losses. Increased adsorption is achievable by adsorbing onto a surfactant adsorbed montmorillonite. Stearic acid sublimes at 179 °C but when adsorbed upon montmorillonite sublimes at 207 and 248 °C. These mass loss steps are ascribed to the desorption of the stearic acid on the external surfaces of the organoclays and from the de-chemisorption from the surfactant held in the interlayer of the montmorillonite.     

A novel organoclay with antibacterial activity prepared from montmorillonite and Chlorhexidini Acetas

A series of novel organoclays with antibacterial activity were synthesized using Ca-montmorillonite and Chlorhexidini Acetas (CA) by ion-exchange. The resultant organoclays were characterized using X-ray diffraction (XRD), high-resolution thermogravimetric analysis (HRTG) and Fourier transform infrared spectroscopy (FTIR). Their antibacterial activity was assayed by so-called halo method. In the organoclays prepared at low CA concentration, CA ions within the clay interlayer adopt a lateral monolayer while a 'kink' state or a special state with partial overlapping of the intercalated CA in the organoclays prepared at 1.0-4.0 CEC. HRTG analysis demonstrates that CA located outside the clay interlayer exists in all synthesized organoclays, resulting from the complex molecular configuration of CA. The dramatic decrease of the surface adsorbed water and interlayer water is caused by the surface property transformation and the replacement of hydrated cations by cationic surfactant. These observations are supported by the results of FTIR. Antibacterial activity test against E. coli demonstrates that the antibacterial activity of the resultant organoclays strongly depends on the content of CA. Meanwhile, the resultant organoclay shows a long-term antibacterial activity that can last for at least one year. These novel organoclays are of potential use in synthesis of organoclay-based materials with antibacterial activity.     

Thermal stability of organoclays with mono- and di-alkyl cationic surfactants

In this study, mono- and di-alkyl cationic surfactants were used to prepare organoclays through ion exchange and the prepared organoclays were characterised by X-ray diffraction (XRD) and thermogravimetric analysis (TG). Larger basal spacings were observed in the interlayer of the organoclays intercalated with DDDMA than organoclays intercalated with DDTMA. The DTG curves identify the thermal stability of organoclays intercalated with two different types of surfactants (DDTMA and DDDMA) and the different arrangements of the surfactant molecules intercalated in the montmorillonite. Both organoclays intercalated with organic surfactant molecules proved to be thermally stable at high temperature. This study provides an understanding of the structure and properties of organoclays, which will enhance the potential applications of organoclays in environmental remediation.     

Application of near infrared spectroscopy for the determination of adsorbed p-nitrophenol on HDTMA organoclay--implications for the removal of organic pollutants from water

NIR spectroscopy has been used to measure the adsorption of p-nitrophenol on untreated montmorillonite and surfactant exchanged montmorillonite. p-Nitrophenol is characterised by an intense NIR band at 8890 cm(-1) which shifts to 8840 cm(-1) upon adsorption on organoclay. The band was not observed for p-nitrophenol adsorbed on untreated montmorillonite. Both the montmorillonite and the surfactant modified montmorillonite are characterised by NIR bands at 7061 and 6791 cm(-1). The organoclay is characterised by two prominent bands at 5871 and 5667 cm(-1) assigned to the fundamental overtones of the mid-IR bands at 2916 and 2850 cm(-1). A band at 6017 cm(-1) is attributed to the p-nitrophenol adsorbed on the organoclay. The band is not observed for the montmorillonite with adsorbed p-nitrophenol. It is concluded that p-nitrophenol is adsorbed to significantly greater amounts on the organoclay compared with the untreated montmorillonite. The implication is that organoclays are most useful for removing organic molecules from water through adsorption.     

A X-ray photoelectron spectroscopy study of HDTMAB distribution within organoclays

X-ray photoelectron spectroscopy (XPS) in combination with X-ray diffraction (XRD) and high-resolution thermogravimetric analysis (HRTG) has been used to investigate the surfactant distribution within the organoclays prepared at different surfactant concentrations. This study demonstrates that the surfactant distribution within the organoclays depends strongly on the surfactant loadings. In the organoclays prepared at relative low surfactant concentrations, the surfactant cations mainly locate in the clay interlayer, whereas the surfactants occupy both the clay interlayer space and the interparticle pores in the organoclays prepared at high surfactant concentrations. This is in accordance with the dramatic pore volume decrease of organoclays compared to those of starting clays. XPS survey scans show that, at low surfactant concentration (<1.0 CEC), the ion exchange between Na⁺ and HDTMA⁺ is dominant, whereas both cations and ion pairs occur in the organoclays prepared at high concentrations (>1.0 CEC). High-resolution XPS spectra show that the modification of clay with surfactants has prominent influences on the binding energies of the atoms in both clays and surfactants, and nitrogen is the most sensitive to the surfactant distribution within the organoclays.     

Sorption of Bisphenol A as Model for Sorption Ability of Organoclays

The arrangement of bisphenol A molecules into organoclays and their interactions with the intercalated surfactant were studied. The organoclays were prepared via solid-state intercalation of four cationic surfactants, such as dodecyltrimethyl-, tetradecyltrimethyl-, hexadecyltrimethyl-, and didodecyldimethyl-ammonium, as bromide salts, at different loading levels into the interlayers of two natural clays. The natural clays, the prepared organoclays, and the spent organoclays were characterized by X-ray powder diffraction, infrared spectroscopy, and scanning electron microscopy. X-ray powder diffraction measurements showed successive interlayer expansions of the d₀₀₁ basal spacing due to the intercalation of the cationic surfactants and the bisphenol A sorption. The increased d₀₀₁ basal spacing of the organoclays after bisphenol A sorption indicates that the molecules are integrated between the alkyl chains of the surfactant in the organoclays interlayers. Infrared spectroscopy was employed to probe the intercalation of the cationic surfactants and the sorbed bisphenol A. New characteristic bands attributed to the bisphenol A phenol rings appear in the range 1518–1613 cm⁻¹ on the infrared spectra of the spent organoclays, proving the presence of bisphenol A in the hydrophobic interlayers. Scanning electron microscopy of the organoclays before and after BPA sorption shows that their morphology becomes fluffy and that the presence of the organic molecules expands the clay structure.     

Very fast sorbent for organic dyes and pollutants

The increasing use of organic compounds endangering the environment encourages search for more efficient sorbents. While crude clay minerals are effective for the adsorption of cations, modified organoclays may adsorb negative and hydrophobic molecules. In this short communication, we present a very fast adsorbing organoclay based on montmorillonite with crystal violet pre-adsorbed up to neutralization of the negative charges. Sorption of erythrosin-B and 2,4,5-trichlorophenol to such organoclay reaches equilibrium in less than a minute, whereas with activated carbon, it took tens of minutes. The pseudo second-order kinetic coefficient for the process was at least two orders of magnitude smaller for the organoclay. Because sorption kinetics is an important factor in water purification, such fast sorbent might have broad environmental applications.     

Influence of cationic surfactant removal on the thermal stability of organoclays

The microstructure, thermal stability, surface energy, and swelling characteristics of two kinds of commercial organoclays, before and after washing treatment with a mixture of H2O/ethanol, were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG), wettability measurement, and swelling measurement. This study demonstrates that the external-surface physically adsorbed surfactant can be removed after washing treatment, resulting in an increase in thermal stability and a decrease in surface energy of the resultant organoclays. Organoclays are difficult to be introduced into a solvent when their surface energies are lower than that of the solvent. On the other hand, the organoclay with gamma(organoclay) < gamma(solvent) is easier to be swollen and expandable by the solvent. The swelling and basal spacing measurements of the organoclays introduced into organic media indicate that the swelling factor and the interlayer swelling are two independent parameters. Both the polar character of the solvent and the swelling capacity of clay have a prominent effect on the interlayer swelling of the organoclays.     

The effect of layer charge and exchangeable cations on sorption of biphenyl on montmorillonites

Montmorillonies separated from the bentonites SAz-1 (Cheto, AZ, USA), and Cressfield (New South Wales, Australia) were used as starting materials. Reduced charge montmorillonites (RCMs) were prepared from these chemically different and Li-saturated montmorillonites via heating at temperatures in the range of 120–300°C. The residual exchangeable Li⁺ cations were then replaced with tetramethylammonium (TMA⁺) or hexadecyltrimethylammonium (HDTMA⁺) cations and the ability of the modified montmorillonites to adsorb biphenyl was investigated. Lower adsorption was observed for Li-montmorillonites than for the organoclays. The extent of adsorption was dependent on both the layer charge of montmorillonite and the size of alkylammonium cations. HDTMA-forms prepared from unheated Li-montmorillonites adsorbed biphenyl better than the organoclays prepared from RCMs. In contrast, the TMA-samples prepared from the Li-montmorillonites that were not heated showed low uptake of biphenyl probably due to high content of TMA⁺ cations. Reduction of the layer charge, resulting in lower content of TMA⁺ cations, increased sorption efficiency of both TMA-montmorillonites. The best adsorbents of biphenyl were HDTMA-SAz-1 prepared from the unheated Li-SAz-1 and TMA-Cressfield prepared from the Li-form heated at 180°C. These samples removed about 80% of biphenyl from its aqueous solutions      

The interlayer swelling and molecular packing in organoclays

Understanding the interlayer swelling and molecular packing in organoclays is important to the formation and design of polymer nanocomposites. This paper presents recent experimental and molecular simulation studies on a variety of organoclays that show a linear relationship between the increase of d-spacing and the mass ratio between organic and clay. A denser molecular packing is observed in organoclays containing surfactants with hydroxyl-ethyl units. Moreover, our simulation results show that the head (nitrogen) groups are essentially tethered to the clay surface while the long hydrocarbon chains tend to adopt a layering structure with disordered conformation, which contrasts with the previous assumptions of either the chains lying parallel to the clay surface or being tilted at rather precise angles.