Kinetic study of the addition of trihalides to unsaturated compounds in ionic liquids. Evidence of a remarkable solvent effect in the reaction of ICl2-

The kinetic constants and activation parameters for the reactions of Br(3)(-) and ICl(2)(-) with some alkenes and alkynes have been determined in the ionic liquids [bmim][PF(6)], [emim][Tf(2)N], [bmim][Tf(2)N], [hmim][TF(2)N], [bm(2)im][Tf(2)N], and [bpy][TF(2)N] (where emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bpy = butylpyridinium, PF(6) = hexafluorophosphate, and Tf(2)N = bis(trifluoromethylsulfonyl)imide) and in 1,2-dichloroethane. The rates of both reactions increase on going from 1,2-dichloroethane to ILs. Evidence suggests that, while the hydrogen bonding ability of the imidazolium cation is probably the main factor able to increase the rate of the addition of ICl(2)(-) to double and triple bonds, this property has no effect on the electrophilic addition of Br(3)(-) to alkenes and alkynes. Furthermore, in the case of the ICl(2)(-) reaction, the hydrogen bonding ability of ILs can be exploited to suppress the unwanted nucleophilic substitution reaction on the products by the Cl(-) anion.     

The glass transition and the distribution of voids in room-temperature ionic liquids: a molecular dynamics study

The glass transition in prototypical room temperature ionic liquids has been investigated by molecular dynamics simulations based on an Amber-like empirical force field. Samples of [C(4)mim][PF(6)], [C(4)mim][Tf(2)N], and [C(3)mim][Tf(2)N] have been quenched from the liquid phase at T = 500 to a glassy state at T ～ 0 K in discontinuous steps of 20 K every 1.2 ns. The glass temperature estimated by simulation (T(g) = 209 K for [C(4)mim][PF(6)], T(g) = 204 K for [C(4)mim][Tf(2)N], and T(g) = 196 K for [C(3)mim][Tf(2)N]) agrees semi-quantitatively with the experimental values (T(g) = 193÷196 K for [C(4)mim][PF(6)], T(g) = 186÷189 K for [C(4)mim][Tf(2)N], and T(g) = 183 K for [C(3)mim][Tf(2)N]). A model electron density is introduced to identify voids in the system. The temperature dependence of the size distribution of voids provided by simulation reproduce well the experimental results of positron annihilation lifetime spectroscopy reported in G. Dlubek, Y. Yu, R. Krause-Rehberg, W. Beichel, S. Bulut, N. Pogodina, I. Krossing, and Ch. Friedrich, J. Chem. Phys. 133, 124502 (2010), with only one free parameter needed to fit the experimental data.     

Neutral and charged 1-butyl-3-methylimidazolium triflate clusters: equilibrium concentration in the vapor phase and thermal properties of nanometric droplets

Ground state energy, structure, and harmonic vibrational modes of 1-butyl-3-methylimidazolium triflate ([bmim][Tf]) clusters have been computed using an all-atom empirical potential model. Neutral and charged species have been considered up to a size (30 [bmim][Tf] pairs) well into the nanometric range. Free energy computations and thermodynamic modeling have been used to predict the equilibrium composition of the vapor phase as a function of temperature and density. The results point to a nonnegligible concentration of very small charged species at pressures (P approximately 0.01 Pa) and temperatures (T >or= 600 K) at the boundary of the stability range of [bmim][Tf]. Thermal properties of nanometric neutral droplets have been investigated in the 0 相似文献   

The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles

The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N]]/[surfactant]) increases. Furthermore, it shows that the RMs consist of discrete spherical and non-interacting droplets of [bmim][Tf(2)N] stabilized by the surfactants. Important differences in the structure of [bmim][Tf(2)N] entrapped inside BHDC RMs, in comparison with the neat IL, are observed from the FT-IR and (1)H NMR measurements. The electrostatic interactions between anions and cations from [bmim][Tf(2)N] and BHDC determine the solvent structure encapsulated inside the nano-droplets. It seems that the IL structure is disrupted due to the electrostatic interaction between the [Tf(2)N](-) and the cationic BHDC polar head (BHD(+)) giving a high ion pair degree between BHD(+) and [Tf(2)N](-) at a low IL content. On the other hand, for the AOT RMs there is no evidence of strong IL-surfactant interaction. The electrostatic interaction between the SO(3)(-) group and the Na(+) counterion in AOT seems to be stronger than the possible [bmim](+)-SO(3)(-) interaction at the interface. Thus, the structure of [bmim][Tf(2)N] encapsulated is not particularly disrupted by the anionic surfactant at all W(s) studied, in contrast to the BHDC RM results. Nevertheless, there is evidence of confinement in the AOT RMs because the [bmim](+)-[Tf(2)N](-) interaction is stronger than in bulk solution. Thus, the IL is more associated upon confinement. Our results reveal that the [bmim][Tf(2)N] structure can be modified in a different manner inside RMs by varying the kind of surfactant used to create the RMs and the IL content (W(s)). These facts can be very important if these media are used as nanoreactors because unique microenvironments can be easily created by simply changing the RM components and W(s).     

New method of fluorination using potassium fluoride in ionic liquid: significantly enhanced reactivity of fluoride and improved selectivity

We have found the new nucleophilic fluorination reaction of some halo- and mesylalkanes to the corresponding fluoroalkanes with KF in the presence of [bmim][BF4] under various reaction conditions. 2-(3-Methanesulfonyloxypropoxy)naphthalene (1) was used as a model compound to optimize this fluorination reaction. Whereas the fluorination of the mesylate 1 with KF in an organic solvent such as CH3CN at 100 degrees C occurred hardly even after 24 h, the same reaction in ionic liquids, [bmim][BF4], as a reaction solvent was completed within 1.5 h, affording the wanted product 2-(3-fluoropropoxy)naphthalene 2a (85%) together with the alkene byproduct 2c (10%). Very interestingly, however, the addition of water (5 equiv) completely eliminated the formation of the undesired alkene 2c and thus gave higher yield of 2a (92%, entry 2). The use of acetonitrile as a cosolvent did not affect the reactivity of the fluorination. The presence of a proper amount of cosolvent was rather desirable (94% yield of 2a). We performed fluorination reactions with other ionic liquids ([bmim][PF6], [bmim][SbF6], [bmim][OTf], and [bmim][N(Tf)2], and two other cosolvents, to find the optimal ionic liquid and cosolvent. Nine different compounds were examined, including the 10 g-synthesis of 2-(fluoromethyl)naphthalene in 93% of isolated yield.     

Nano-indentation of a room-temperature ionic liquid film on silica: a computational experiment

We investigate the structure of the [bmim][Tf(2)N]/silica interface by simulating the indentation of a thin (4 nm) [bmim][Tf(2)N] film by a hard nanometric tip. The ionic liquid/silica interface is represented in atomistic detail, while the tip is modelled by a spherical mesoscopic particle interacting via an effective short-range potential. Plots of the normal force (F(z)) on the tip as a function of its distance from the silica surface highlight the effect of weak layering in the ionic liquid structure, as well as the progressive loss of fluidity in approaching the silica surface. The simulation results for F(z) are in near-quantitative agreement with new AFM data measured on the same [bmim][Tf(2)N]/silica interface under comparable thermodynamic conditions.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

A metallacage encapsulating chloride as a probe for a solvation scale in ionic liquids

With the purpose of assessing the reactivity of chloride ions dissolved in ionic liquids (ILs), a relative scale for the solvation of chloride is given for a series of ILs based on the bis(trifluoromethane)sulfonimide ([Tf(2)N]) anion and different cations, 1-butyl-3-methylimidazolium ([bmim]), 1-butyl-2,3-dimethylimidazolium ([bdmim]), 1-butyl-1-methylpyrrolidinium ([bmpy]), 1-butylpyridinium ([bpy]), 1-pentyl-1,1,1-triethylammonium ([C(5)e(3)am]), and 1-(2-hydroxy)ethyl-3-methylimidazolium ([mimeOH]). Insights into the solvation of chloride are achieved by the thermodynamic study of the reaction of dissociation of a chloride-templated nickel(II) metallacage performed at various temperatures by UV-visible spectroscopy in each IL. The order of chloride solvation [C(5)e(3)am][Tf(2)N] < [bmpy][Tf(2)N] < [bmim][Tf(2)N] 相似文献   

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Kemp elimination: a probe reaction to study ionic liquids properties

The amino induced elimination of benzisoxazole into the relevant o-cyanophenolate ion (Kemp elimination) has been studied in [bmim][BF 4] solution at 298 K. To have information about the interactions between reactants and ionic liquid, the reaction has been carried out at different temperatures (293-313 K). Several primary, secondary, and tertiary amines have been used to study the effect of amine structure on the reaction rate. The collected data show that the amine structure seems to have a crucial role in determining the reaction rate. Furthermore, as different cation or anion structures of an ionic liquid can significantly affect its properties, the title reaction has been performed in four different ionic liquids ([bmim][PF6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]), using pyrrolidine and piperidine as model amines. An H-donor negative solvent (MeOH and [bmim][NTf 2]) effect on reaction rate was detected. Finally, a narrow range of activation parameters was calculated both for the reaction induced by different amines and for pyrrolidine and piperidine, in the presence of different ILs. This fact suggests the occurrence of an "early" transition state.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Chloride complexation by uranyl in a room temperature ionic liquid. A computational study

The stepwise addition of 1 to 4 Cl(-) anions to the uranyl cation has been studied via potential of mean force (PMF) calculations in the [BMI][Tf 2N] ionic liquid based on the 1-butyl-3-methylimidazolium cation (BMI(+)) and the bis(trifluoromethylsulfonyl)imide anion (Tf2N(-)). According to these calculations, the four Cl(-) complexation reactions are favored and UO2Cl4(2-) is the most stable chloride complex in [BMI][Tf2N]. The solvation of the different chloro-complexes is found to evolve from purely anionic (ca. 5 Tf2N(-) ions around UO2(2+)) to purely cationic (ca. 8.5 BMI (+) cations around UO2Cl4(2-)), with onion-type alternation of solvent shells. We next compare the solvation of the UO2Cl4(2-) complex to its reduced analogue UO2Cl4(3-) in the [BMI][Tf2N] and [MeBu3N][Tf2N] liquids that possess the same anion, but differ by their cation (imidazolium BMI(+) versus ammonium MeBu3N(+)). The overall solvation structure of both complexes is found to be similar in both liquids with a first solvation shell formed exclusively of solvent cations (about 9 BMI(+) cations or 7 MeBu3N(+) cations). However, a given complex is better solvated by the [BMI][Tf2N] liquid, due to hydrogen bonding interactions between Cl(-) ligands and imidazolium-ring C-H protons. According to free energy calculations, the gain in solvation energy upon reduction of UO2Cl4(2-) to UO2Cl4(3-) is found to be larger in [BMI][Tf2N] than in [MeBu3N][Tf2N], which is fully consistent with recent experimental results (Inorg. Chem. 2006, 45, 10419).     

Nucleophilic displacement reactions in ionic liquids: substrate and solvent effect in the reaction of NaN(3) and KCN with alkyl halides and tosylates

Room-temperature ionic liquids have been used as environmentally benign solvents for the preparation of primary and secondary alkyl azides and nitriles under solid-RTIL phase-transfer conditions. The reaction of primary, secondary, and tertiary halides or tosylates with KCN and NaN(3) has been investigated in three ionic liquids ([bmim][PF(6)], [bmim][N(Tf)(2)], and [hpyr] [N(Tf)(2)]). The observed nucleofugacity scales for the reaction of NaN(3) are similar to those reported for the same process in cyclohexane, indicating that in these solvents it is possible to evidence the intrinsic ability to depart of leaving groups. Changes in the nature of the IL cation or anion determine significant modifications in reactivity of the investigated substrates. Reactivity has been interpreted considering a gradual shift of the mechanism from concerted S(N)2 (primary substrates) to stepwise S(N)1 (tertiary substrate, 3), through the nucleophilically assisted formation of an ion pair intermediate, in the case of 2d.     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

Homoleptic alkaline earth metal bis(trifluoromethanesulfonyl)imide complex compounds obtained from an ionic liquid

The first homoleptic alkaline earth bis(trifluoromethanesulfonyl)imide (Tf2N) complexes [mppyr]2[Ca(Tf2N)4], [mppyr]2[Sr(Tf2N)4], and [mppyr][Ba(Tf2N)3] were crystallized from a solution of the respective alkaline earth bis(trifluoromethanesulfonyl)imide and the ionic liquid [mppyr][Tf2N] (mppyr = 1,1-N-methyl-N-propylpyrrolidinium). In the calcium and strontium compounds, the alkaline earth metal (AE) is coordinated by four bidentately chelating Tf2N ligands to form isolated (distorted) square antiprismatic [AE(Tf2N)4]2- complexes which are separated by N-methyl-N-propylpyrrolidinium cations. In contrast, the barium compound, [mppyr][Ba(Tf2N)3], forms an extended structure. Here the alkaline earth cation is surrounded by six oxygen atoms belonging to three Tf2N- anions which coordinate in a bidentate chelating fashion. Three further oxygen atoms of the same ligands are linking the Ba2+ cations to infinite (infinity)(1)[Ba(Tf2N)3] chains.     

Manipulating solute nucleophilicity with room temperature ionic liquids

In this work we report the effect of ionic liquids on a class of charge-neutral nucleophiles. We have studied the reactions of (n)butylamine, di-(n)butylamine, and tri-(n)butylamine with methyl p-nitrobenzenesulfonate in [bmpy][N(Tf)(2)], [bmpy][OTf], and [bmim][OTf] (bmpy = 1-butyl-1-methylpyrrolidinium; bmim = 1-butyl-3-methylimidazolium) and compared their reactivities, k(2), to those for the same reactions in the molecular solvents dichloromethane and acetonitrile. It was shown that all of the amines are more nucleophilic in the ionic liquids than in the molecular solvents studied in this work. Comparison is also made with the effect of ionic liquids on the reactivity of chloride ions, which are deactivated in ionic liquids. The Eyring activation parameters revealed that changes in the activation entropies are largely responsible for the effects seen. This can be explained in part by the differing hydrogen-bonding properties, as shown by the Kamlet-Taft solvent parameters, of each of these solvents and the formation of hydrogen bonds between the solvents and the nucleophiles.     

Intramolecular electron transfer within a covalent, fixed-distance donor-acceptor molecule in an ionic liquid

Intramolecular photoinduced charge separation and recombination within the donor-acceptor molecule 4-(N-pyrrolidino)naphthalene-1,8-imide-pyromellitimide, 5ANI-PI, are studied using ultrafast transient absorption spectroscopy in the room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [EMIM][Tf2N]. The rate constants of both photoinduced charge separation and charge recombination for 5ANI-PI in [EMIM][Tf2N] are comparable to those observed in pyridine, which has a static dielectric constant similar to that of [EMIM][Tf2N] but a viscosity that is nearly 2 orders of magnitude lower than that of [EMIM][Tf2N]. The electron-transfer dynamics of 5ANI-PI in [EMIM][Tf2N] are compared to those in pyridine as a function of temperature and are discussed in the context of recently reported ionic liquid solvation studies.     

Ionic liquids/[bmim][N3] mixtures: promising media for the synthesis of aryl azides by SNAr

The nucleophilic aromatic substitution of some activated aryl or heteroaryl halides has been performed in ionic liquid solution, using the 1-butyl-3-methylimidazolium azide as a nucleophile. The reaction course was studied varying the structures of both substrates and ionic liquids. In particular, in the latter case, the reaction of 2-bromo-5-nitrothiophene was carried out in five different ionic liquids ([bmim][BF 4], [bmim][PF 6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]). Finally, for all the substrates considered, a comparison with data obtained in MeOH solution in the presence of NaN 3 was also performed. Data collected indicate that in some cases it is possible to obtain aromatic or heteroaromatic azide derivatives in satisfactory yield by means of a S NAr reaction using [bmim][N 3] as the nucleophile.     

Study of aromatic nucleophilic substitution with amines on nitrothiophenes in room-temperature ionic liquids: are the different effects on the behavior of para-like and ortho-like isomers on going from conventional solvents to room-temperature ionic liquids related to solvation effects?

The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.     

Interactions and dynamics in ionic liquids

Precise dielectric spectra have been determined at 25 degrees C over the exceptionally broad frequency range of 0.1 相似文献