Probing surface adhesion forces of Enterococcus faecalis to medical-grade polymers using atomic force microscopy

The aim of this study was to compare the initial adhesion forces of the uropathogen Enterococcus faecalis with the medical-grade polymers polyurethane (PU), polyamide (PA), and poly(tetrafluoroethylene) (PTFE). To quantify the cell-substrate adhesion forces, a method was developed using atomic force microscopy (AFM) in liquid that allows for the detachment of individual live cells from a polymeric surface through the application of increasing force using unmodified cantilever tips. Results show that the lateral force required to detach E. faecalis cells from a substrate differed depending on the nature of the polymeric surface: a force of 19 +/- 4 nN was required to detach cells from PU, 6 +/- 4 nN from PA, and 0.7 +/- 0.3 nN from PTFE. Among the unfluorinated polymers (PU and PA), surface wettability was inversely proportional to the strength of adhesion. AFM images also demonstrated qualitative differences in bacterial adhesion; PU was covered by clusters of cells with few cell singlets present, whereas PA was predominantly covered by individual cells. Moreover, extracellular material could be observed on some clusters of PU-adhered cells as well as in the adjacent region surrounding cells adhered on PA. E. faecalis adhesion to the fluorinated polymer (PTFE) showed different characteristics; only a few individual cells were found, and bacteria were easily damaged, and thus detached, by the tip. This work demonstrates the utility of AFM for measurement of cell-substrate lateral adhesion forces and the contribution these forces make toward understanding the initial stages of bacterial adhesion. Further, it suggests that initial adhesion can be controlled, through appropriate biomaterial design, to prevent subsequent formation of aggregates and biofilms.     

Thermodynamic Investigation of Staphylococcus epidermidis interactions with protein-coated substrata

We evaluated self-assembled monolayers (SAMs) as potential coatings to prevent bacterial adhesion to biomaterials. Bacterial retention experiments were conducted on SAMs, some of which were coated with the model proteins fetal bovine serum (FBS) and fibronectin (FN). A thermodynamic approach was applied to calculate the Gibbs free energy changes of adhesion (DeltaG(adh)) of Staphylococcus epidermidis interacting with the substrates. When only nonspecific interactions controlled bacterial attachment, such as for the non-protein-coated substrates or the FBS substrates, the correlation between the thermodynamic predictions and measured values of bacterial retention was strong. However, when FN was adsorbed to the surfaces, the thermodynamic modeling underestimated bacterial adhesion, presumably since specific interactions between proteins of S. epidermidis and FN led to stronger attachment. Bacterial viability on the substrates was correlated with thermodynamic properties. For example, although bacteria attached more to surfaces having negative DeltaG(adh) values, these cells experienced the greatest loss of viability, presumably since strongly attached bacteria were unable to divide and grow. When the DeltaG(adh) values were decoupled into their components, we saw that acid-base interactions due to hydrogen bonding dominated the interactions of bacteria and proteins with each other and with the substrates in aqueous media. Finally, we discuss concerns regarding the use of the thermodynamic model to predict bacterial adhesion behavior in biomaterials systems.     

Analysis of the bacterial heat shock response to photodynamic therapy-mediated oxidative stress

Antimicrobial photodynamic therapy (PDT) has recently emerged as an effective modality for the selective destruction of bacteria and other pathogenic microorganisms. We investigated whether PDT induced protective responses such as heat shock proteins (HSPs) in bacteria. Using the photosensitizer Toluidine Blue O (TBO) at sublethal PDT conditions, a seven-fold increase in bacterial HSP GroEL and a three-fold increase in HSP DnaK were observed in Escherichia coli post PDT. Pretreatment with 50°C heat for 30 min reduced PDT killing in both E. coli and in Enterococcus faecalis, with the most pronounced inhibition occurring at 50 μm TBO with 5 J cm(-2) 635 nm light, where E. coli killing was reduced by 2 log(10) and E. faecalis killing was reduced by 4 log(10). Finally, inhibition of the highly conserved chaperone DnaK using a small molecule benzylidene lactam HSP inhibitor potentiated (but not significantly) the effect of PDT at a TBO concentration of 2.5 μm in E. faecalis; however, this effect was not observed in E. coli presumably because inhibitor could not gain access due to Gram-negative permeability barrier. Induction of HSPs may be a mechanism whereby bacteria could become resistant to PDT and warrants the need for further study in the application of dual PDT-HSP-inhibition therapies.     

Evaluating protein attraction and adhesion to biomaterials with the atomic force microscope

Failure of implanted biomaterials is commonly due to nonspecific protein adsorption, which in turn causes adverse reactions such as the formation of fibrous capsules, blood clots, or bacterial biofilm infections. Current research efforts have focused on modifying the biomaterial interface to control protein reactions. Designing biomaterial interfaces at the molecular level, however, requires an experimental technique that provides detailed, dynamic information on the forces involved in protein adhesion. The goal of this study was to develop an atomic force microscope (AFM)-based technique to evaluate protein adhesion on biomaterial surfaces. In this study, the AFM was used to evaluate (i) protein-protein, (ii) protein-substrate, and (iii) protein-dextran interactions. The AFM was first used to measure the pull-off forces between bovine serum albumin (BSA) tips/BSA surfaces and BSA tips/anti-BSA surfaces. Results from these protein-protein studies were consistent with the literature. More importantly, the successful measurement of antibody-antigen binding interactions demonstrates that both the BSA and anti-BSA proteins retain their folded conformation and remain functional following our immobilization protocol. The AFM was also used to quantify the physiochemical interactions of proteins during adhesion to various self-assembled monolayers (SAMs) and dextran-coated substrates representative of potential biomaterial interface modifications. Dextran, which renders surfaces very hydrophilic, was the only surface coating that BSA protein did not adhere to. Hydrophobic interactions were not found to play a significant role in BSA adhesion. Therefore, the dextran molecules may resist protein adhesion by repulsive steric effects or hydration pressure. Moreover, the AFM-based methodology provides dynamic, quantitative information about protein adhesion at the nanoscale level.     

Increased adhesion of Enterococcus faecalis strains with bimodal electrophoretic mobility distributions

Initial adhesion is a determinant in the development of microbial biofilms. It is influenced, amongst others, by the surface hydrophobicity and the electrostatic characteristics of the substratum and adhering organisms. Enterococcus faecalis strains, grown in pure cultures, generally display subpopulations with different electrokinetic features, reflected in a bimodal electrophoretic mobility distribution. Here, the initial adhesion kinetics of five heterogeneous and five homogeneous E. faecalis strains were followed in a parallel-plate flow chamber. After 4h of flow, heterogeneous strains adhered in significantly higher numbers than homogeneous strains (7.3 x 10(6) and 1.9 x 10(6)cm(-2), respectively), but the initial deposition rates were not significantly influenced (740 and 600 cm(-2)s(-1), respectively). Apparently, initial deposition of bacteria is mainly governed by attractive Lifshitz-Van der Waals forces that overwhelm the electrostatic repulsion energy barrier, thus resulting in similar initial deposition rates for the various bacterial populations investigated. In contrast, during later stages of adhesion, bacteria in heterogeneous cultures likely experience a lower electrostatic repulsion from already adhering bacteria than bacteria in homogeneous cultures, thus allowing a closer proximity of the bacteria with respect to each other, which ultimately leads to increased adhesion after 4 h.     

Inherent antibacterial activity of a peptide-based beta-hairpin hydrogel

Among several important considerations for implantation of a biomaterial, a main concern is the introduction of infection. We have designed a hydrogel scaffold from the self-assembling peptide, MAX1, for tissue regeneration applications whose surface exhibits inherent antibacterial activity. In experiments where MAX1 gels are challenged with bacterial solutions ranging in concentrations from 2 x 10(3) colony forming units (CFUs)/dm2 to 2 x 10(9) CFUs/dm2, gel surfaces exhibit broad-spectrum antibacterial activity. Results show that the hydrogel surface is active against Gram-positive (Staphylococcus epidermidis, Staphylococcus aureus, and Streptococcus pyogenes) and Gram-negative (Klebsiella pneumoniae and Escherichia coli) bacteria, all prevalent in hospital settings. Live-dead assays employing laser scanning confocal microscopy show that bacteria are killed when they engage the surface. In addition, the surface of MAX1 hydrogels was shown to cause inner and outer membrane disruption in experiments that monitor the release of beta-galactosidase from the cytoplasm of lactose permease-deficient E. coli ML-35. These data suggest a mechanism of antibacterial action that involves membrane disruption that leads to cell death upon cellular contact with the gel surface. Although the hydrogel surface exhibits bactericidal activity, co-culture experiments indicate hydrogel surfaces show selective toxicity to bacterial versus mammalian cells. Additionally, gel surfaces are nonhemolytic toward human erythrocytes, which maintain healthy morphologies when in contact with the surface. These material attributes make MAX1 gels attractive candidates for use in tissue regeneration, even in nonsterile environments.     

Controlling E. coli adhesion on high-k dielectric bioceramics films using poly(amino acid) multilayers

The influence of high-k dielectric bioceramics with poly(amino acid) multilayer coatings on the adhesion behavior of Escherichia coli (E. coli) was studied by evaluating the density of bacteria coverage on the surfaces of these materials. A biofilm forming K-12 strain (PHL628), a wild-type strain (JM109), and an engineered strain (XL1-Blue) of E. coli were examined for their adherence to zirconium oxide (ZrO(2)) and tantalum oxide (Ta(2)O(5)) surfaces functionalized with single and multiple layers of poly(amino acid) polyelectrolytes made by the layer-by-layer (LBL) deposition. Two poly(amino acids), poly(l-arginine) (PARG) and poly(l-aspartic acid) (PASP), were chosen for the functionalization schemes. All three strains were found to grow and preferentially adhere to bare bioceramic film surfaces over bare glass slides. The bioceramic and glass surfaces functionalized with positively charged poly(amino acid) top layers were observed to enhance the adhesion of these bacteria by up to 4-fold in terms of bacteria surface coverage. Minimal bacteria coverage was detected on surfaces functionalized with negatively charged poly(amino acid) top layers. The effect of different poly(amino acid) coatings to promote or minimize bacterial adhesion was observed to be drastically enhanced with the bioceramic substrates than with glass. Such observed enhancements were postulated to be attributed to the formation of higher density of poly(amino acids) coatings enabled by the high dielectric strength (k) of these bioceramics. The multilayer poly(amino acid) functionalization scheme was successfully applied to utilize this finding for micropatterning E. coli on bioceramic thin films.     

Optical imaging of bacterial infection in living mice using a fluorescent near-infrared molecular probe

An optical imaging probe was synthesized by attaching a near-infrared carbocyanine fluorophore to an affinity group containing two zinc(II) dipicolylamine (Zn-DPA) units. The probe has a strong and selective affinity for the surfaces of bacteria, and it was used to image infections of Gram-positive S. aureus and Gram-negative E. coli bacteria in living nude mice. After intravenous injection, the probe selectively accumulates at the sites of localized bacterial infections in the thigh muscles of the mice.     

Bacterial adhesion to glass and metal-oxide surfaces

Metal oxides can increase the adhesion of negatively-charged bacteria to surfaces primarily due to their positive charge. However, the hydrophobicity of a metal-oxide surface can also increase adhesion of bacteria. In order to understand the relative contribution of charge and hydrophobicity to bacterial adhesion, we measured the adhesion of 8 strains of bacteria, under conditions of low and high-ionic strength (1 and 100 mM, respectively) to 11 different surfaces and examined adhesion as a function of charge, hydrophobicity (water contact angle) and surface energy. Inorganic surfaces included three uncoated glass surfaces and eight metal-oxide thin films prepared on the upper (non-tin-exposed) side of float glass by chemical vapor deposition. The Gram-negative bacteria differed in lengths of lipopolysaccharides on their outer surface (three Escherichia coli strains), the amounts of exopolysaccharides (two Pseudomonas aeruginosa strains), and their known relative adhesion to sand grains (two Burkholderia cepacia strains). One Gram positive bacterium was also used that had a lower adhesion to glass than these other bacteria (Bacillus subtilis). For all eight bacteria, there was a consistent increase in adhesion between with the type of inorganic surface in the order: float glass exposed to tin (coded here as Si-Sn), glass microscope slide (Si-m), uncoated air-side float glass surface (Si-a), followed by thin films of (Co(1-y-z)Fe(y)Cr(z))3O4, Ti/Fe/O, TiO2, SnO2, SnO2:F, SnO2:Sb, A1(2)O3, and Fe2O3 (the colon indicates metal doping, a slash indicates that the metal is a major component, while the dash is used to distinguish surfaces). Increasing the ionic strength from 1 to 100 mM increased adhesion by a factor of 2.0 +/- 0.6 (73% of the sample results were within the 95% CI) showing electrostatic charge was important in adhesion. However, adhesion was not significantly correlated with bacterial charge and contact angle. Adhesion (A) of the eight strains was significantly (P < 10(-25)) correlated with total adhesion free energy (U) between the bacteria and surface (A = 2162e(-1.8U)).Although the correlation was significant, agreement between the model and data was poor for the low energy surfaces (R2 = 0.68), indicating that better models or additional methods to characterize bacteria and surfaces are still needed to more accurately describe initial bacterial adhesion to inorganic surfaces.     

Altholactone displays promising antimicrobial activity

The antimicrobial activity of altholactone, a naturally extracted styryllactone isolated from Goniothalamus malayanus, was determined against Gram positive (S. aureus ATTC 25923, S. aureus ATTC 25392, and E. faecalis ATTC 29212) and Gram negative (E. coli ATTC 35218, S. typhi ATTC 14023 and P. aeruginosa ATCC 27853) reference bacteria and against the fungus C. albicans ATTC 10231. Different concentrations of altholactone (0, 12, 25, and 50 μg/mL) were used. Results revealed that altholactone inhibited the growth of all tested microbes except P. aeruginosa ATCC 27853 in a dose-dependent manner, with the highest cytotoxic effects occurring at 50 μg/mL. The average of the inhibition zones of the different concentrations was between 0-30 mm. Furthermore, altholactone-induced antimicrobial activity against the more sensitive microbes was assessed by measuring the minimal inhibitory concentration (MIC). Results indicated that Gram positive (S. aureus ATTC 25923, S. aureus ATTC 25392, and E. faecalis ATTC 29212) cells were more sensitive to altholactone than Gram negative ones (E. coli ATTC 35218, S. typhi ATTC 14023). C. albicans showed moderate sensitivity. These results indicate that altholactone might be a potential antimicrobial agent, particularly in ciprofloxacin-refractory S. aureus and E. faecalis infections. Further investigations are required to illustrate the mechanism(s) by which altholactone produces its antimicrobial effects.     

Importance of molecular details in predicting bacterial adhesion to hydrophobic surfaces

Electrostatic and hydrophobic forces are generally recognized as important in bacterial adhesion. Current continuum models for these forces often wrongly predict measurements of bacterial adhesion forces. The hypothesis tested here is that even qualitative guides to bacterial adhesion often require more than continuum information about hydrophobic forces; they require knowledge about molecular details of the bacteria and substrate surface. In this study, four different strains of bacteria were adsorbed to silica surfaces hydrophobized with alkylsilanes. The thickness of the lipopolysaccharide layers varied on the different bacteria, and the lengths of the alkylsilane molecules were varied from experiment to experiment. Bacterial adhesion was assessed using column experiments and atomic force microscopy (AFM) experiments. Results show that hydrophobized surfaces have higher bacterial sticking coefficients and stronger adhesion forces than bare silica surfaces, as expected. However, adhesion decreased as the solution Debye length became longer than the alkylsilane, perhaps since the silane molecules could not "reach" the bacterial surface. Similarly, those bacteria with a long o-antigen layer had decreased adhesion, perhaps since the silane molecules could not reach surface-bound proteins on the bacteria. This study reveals that macroscopic measurements such as contact angle are not able to fully describe bacterial adhesion; rather, additional details such as the molecular length are required to predict adhesion.     

Bio‐Inspired Coating Strategies for the Immobilization of Polymyxins to Generate Contact‐Killing Surfaces

Microbial colonization of indwelling devices remains a major concern in modern healthcare. Developing approaches to prevent biomaterial‐associated infections (BAI) is, therefore, in great demand. This study aimed to immobilize two antimicrobial peptides (polymyxins B and E) onto polydimethylsiloxane (PDMS) using two polydopamine (pDA)‐based approaches: the conventional two‐step method involving the deposition of a pDA layer to which biomolecules are immobilized, and a one‐step method where peptides are dissolved together with dopamine before its polymerization. Surface characterization confirms the immobilization of polymyxins onto PDMS at a non‐toxic concentration. Immobilization of polymyxins using a one‐step pDA‐based approach is able to prevent Pseudomonas aeruginosa adhesion and kill a significant fraction of the adherent ones. Living cells adhered to these modified surfaces exhibit the same susceptibility pattern as cells adhered to unmodified surfaces, highlighting no resistance development. Results suggest that polymyxins immobilization holds a great potential as an additional antimicrobial functionality in the design of biomaterials.

     

Aggregation-induced emission-active antibacterial hydrogel with self-indicating ability for real-time monitoring of drug release process

Although antibacterial hydrogels are emerging as promising biomaterials for effective inhibition of bacterial infections, monitoring their dynamic release behaviors in a visual manner remains greatly challenging. Herein, non-conjugated luminescent polymers (NCLPs) with aggregation-induced emission (AIE) characteristics are used for the first time to develop a visualization strategy to monitor the release process of the drug-loaded hydrogel. The novel antimicrobial peptide polymers with intrinsic AIE effect, namely nanoengineered peptide-grafted hyperbranched polymers (NPGHPs), are encapsulated in an anionic polyelectrolyte to construct the AIE-active fluorescent polymeric hydrogel (NPGHPs/SA gel). Interestingly, the rigid environment mediated by hydrogen bonding and electrostatic interaction contributes to promoting the unconventional luminescence of fluorescent clusters. Moreover, the successive drug release process of NPGHPs/SA gel can be tracked in real time by using fluorescence microscopy. The hydrogel also has potent antibacterial activities against Gram-negative bacteria (E. coli, P. aeruginosa) and Gram-positive bacteria (S. aureus, B. subtilis). Overall, this work not only provides an advanced biomedical material with broad-spectrum antibacterial ability but also opens a facile avenue up for the investigation of drug release from gel systems.     

Wettability regulated gram-negative bacterial adhesion on biomimetic hierarchical structures

One of the critical issues in gram-negative bacterial adhesion is how wettability regulates adhesion as the surface wettability varies from superhydrophilic to superhydrophobic,and what is the relevant/contributing role of the lipopolysaccharide(LPS)outer layer of the gram-negative shell during this procedure.Herein,by avoiding the unexpected influence induced by the varied topographies,control over gram-negative bacteria adhesion by wettability is achieved on biomimetic hierarchical surfaces, which is mainly mediated by LPS layer.The study provides a methodology to have a good control over bacteria cell adhesion by properly designing wettable surface structures.This design concept is helpful for developing new generations of biomaterials in order to control a variety of diseases induced by gram-negative bacteria,which still continue to be very important and necessary in the fields of biomedicine.     

The effects of shear stress on isolated receptor-ligand interactions of Staphylococcus epidermidis and human plasma fibrinogen using molecularly patterned microfluidics

Staphylococcus epidermidis is an opportunistic pathogen that has been implicated in hospital-acquired infections, specifically related to implanted intravascular devices. S. epidermidis adhesion is a mechanism of colonization, leading to pathogenesis. Here we demonstrate an easily fabricated and robust parallel microfluidic platform to investigate the physiologically-relevant effects of fluid shear on S. epidermidis adhesion to human fibrinogen (hFg) with increased experimental throughput. In situ molecular patterning using fluid flow boundaries allows for isolation of the molecular interactions in highly defined shear stress environments, while keeping the device operation simple and reproducible. We characterize two modes of attachment of S. epidermidis to hFg coated surfaces. Single colonies adhere in high fractions at low shear stresses (~1 dyne cm(-2)) and adhesion decays with increasing shear. However, clusters of bacteria adhere the highest at median wall shear stress (up to 10 dyne cm(-2)), and adhesion subsequently decays above this critical shear stress. This initial characterization suggests a previously unobserved phenomenon of shear activated cell-cell adhesion in S. epidermidis, which acts to increase the overall attachment strength to hFg. Both of these modes of attachment are dependant upon the presence of intact hFg, indicating that adhesion is resultant from specific molecular recognition between the bacteria and human fibrinogen. This platform provides new insight into complex host-pathogen interactions, and will allow for further investigation of colonization and pathogenesis in more physiologically relevant conditions.     

Recent Advances in Dual-Function Superhydrophobic Antibacterial Surfaces

Bacterial adhesion and subsequent biofilm formation on the surfaces of synthetic materials imposes a significant burden in various fields, which can lead to infections in patients or reduce the service life of industrial devices. Therefore, there is increasing interest in imbuing surfaces with antibacterial properties. Bioinspired superhydrophobic surfaces with high water contact angles (>150°) exhibit excellent surface repellency against contaminations, thereby preventing initial bacterial adhesion and inhibiting biofilm formation. However, conventional superhydrophobic surfaces typically lack long-term durability and are incapable of achieving persistent efficacy against bacterial adhesion. To overcome these limitations, in recent decades, dual-function superhydrophobic antibacterial surfaces with both bacteria-repelling and bacteria-killing properties have been developed by introducing bactericidal components. These surfaces have demonstrated improved long-term antibacterial performance in addressing the issues associated with surface-attached bacteria. This review summarizes the recent advancements of these dual-function superhydrophobic antibacterial surfaces. First, a brief overview of the fabrication strategies and bacteria-repelling mechanism of superhydrophobic surfaces is provided and then the dual-function superhydrophobic antibacterial surfaces are classified into three types based on the bacteria-killing mechanism: i) mechanotherapy, ii) chemotherapy, and iii) phototherapy. Finally, the limitations and challenges of current research are discussed and future perspectives in this promising area are proposed.     

Detection of Escherichia coli O157:H7 bacteria by a combination of immunofluorescent staining and capillary electrophoresis

As the number of incidents of bacterial infections continues to rise around the globe, simpler, faster, and more sensitive diagnostic techniques are required to improve the safety of the food supply and to screen for potential bacterial infections in humans. We present here direct and indirect approaches for the detection of bacteria, which are based upon a combination of immunofluorescent staining and capillary electrophoresis. In the direct approach, Escherichia coli O157:H7 bacteria stained with fluorescein-tagged specific antibodies are detected by CE, while in the indirect approach fluorescein-tagged specific antibodies to E. coli are first captured by E. coli O157:H7 bacteria and then released and detected by CE. We have identified suitable bacteria staining and CE protocols, which involved a 10 mM Tris-borate-EDTA (TBE) buffer, 0.25 micro g antibody/1 million bacteria, and capillaries dynamically coated with poly-N-hydroxyethylacrylamide (polyDuramide). We have also successfully detected the presence of E. coli O157:H7 in contaminated meat. The total time required for analysis was 6-8 h, which is less than that realized in most commercial assays presently available.     

基于聚多巴胺辅助自组装单分子层技术的PTFE表面修饰及其内皮细胞选择性黏附研究

利用聚多巴胺技术对PTFE进行表面改性,X射线光电子能谱(XPS)、椭偏、接触角以及石英晶体微天平(QCM-D)证实DOPA分子可以在PTFE表面自聚形成反应性的超薄膜功能涂层,并通过聚多巴胺辅助自组装单分子层(SAM)技术构建了活性多肽链段CGREDVDY的界面.细胞黏附实验反映活性链段CGREDVDY的修饰表面具备良好的内皮细胞选择性黏附能力.这种具有内皮细胞选择性黏附能力的界面有望实现材料在复杂生理环境中对内皮细胞的原位诱导,为制备具有血管内皮原位快速愈合功能的新型血液相容性人造血管提供新途径.     

A modified polyvinylchloride surface with antibacterial and antifouling functions

Surfaces with antibacterial and hydrophilic properties are very attractive to cardiovascular applications. The objective of this study was to synthesize and immobilize a novel antibacterial and hydrophilic polymer onto surface of polyvinylchloride via an effective and mild surface coating technique. The surface coated with a terpolymer constructed with N‐vinylpyrrolidone, 3,4‐dichloro‐5‐hydroxy‐2(5H)‐furanone derivative, and succinimide residue was evaluated with cell adhesion, bacterial adhesion, and bacterial viability. 3T3 mouse fibroblast cells and two bacteria species were used to evaluate surface adhesion and antibacterial activity. Results showed that the polymer‐modified polyvinylchloride surface exhibited not only significantly decreased 3T3 fibroblast cell adhesion with a 66% to 87% reduction but also significantly decreased bacterial adhesion with 69% to 87% and 52% to 74% reduction of Pseudomonas aeruginosa and Staphylococcus aureus attachment, respectively, as compared with original polyvinylchloride. Furthermore, the modified polyvinylchloride surfaces exhibited significant antibacterial functions by inhibiting bacterial growth (75%‐84% and 78–94% inhibition of P aeruginosa and S aureus, respectively, as compared to original polyvinylchloride) and killing bacteria. These results demonstrate that covalent polymer attachment conferred antifouling and antibacterial properties to the polyvinylchloride surface.     

Laser trap studies of end-on E. coli adhesion to glass

Rod-shaped Escherichia coli K12:D21 bacteria were previously found to adhere by their ends (poles) [J.F. Jones, J.D. Feick, D. Imoudu, N. Chukwumah, M. Vigeant, D. Velegol, Appl. Environ. Microbiol. 69 (2003) 6515.]. In the current study we used a Nd:YAG 1064 nm laser trap to quantify the fraction of adherent bacteria and the time scale for the adhesion to occur. For the E. coli studied, 15.9+/-3.4% of the bacteria adhered when presented end-on for 15s to a cleaned glass surface that was not treated for specific interactions. These bacteria were found to adhere either instantaneously (approximately <1s) or not at all, and the adhesion was shown to be independent of power (force) of the laser trap. Additionally, for a given bacterium, either 0 or 1 ends were adhesive, never both ends. It is hypothesized that the end-on adhesion of D21 is related to bacterial polarity that dynamically results from the division process. We studied the reattachment of cells after adhesion and subsequent removal, finding that most bacteria reattach, some at least five times. However, a small fraction of D21 did not reattach after the first removal. Bacterial cells with observable division planes were tested for end-on adhesion; none of the 18 cells studied adhered by either end. On the other hand, we examined 50 daughter cells immediately after division, and four of the cells were adhesive. End-on adhesion is shown to be an important initial adhesion strategy for the E. coli strain via a single end with adhesion occurring instantaneously. Knowledge about adherent nanodomains (here, on one end) on bacteria will lead to better predictions of sticking coefficients and bacteria transport through porous media.