Differentiation of isomeric dinitrotoluenes and aminodinitrotoluenes using electrospray high resolution mass spectrometry

Explosive detection and identification play an important role in the environmental and forensic sciences. However, accurate identification of isomeric compounds remains a challenging task for current analytical methods. The combination of electrospray multistage mass spectrometry (ESI‐MSⁿ) and high resolution mass spectrometry (HRMS) is a powerful tool for the structure characterization of isomeric compounds. We show herein that resonant ion activation performed in a linear quadrupole ion trap allows the differentiation of dinitrotoluene isomers as well as aminodinitrotoluene isomers. The explosive‐related compounds: 2,4‐dinitrotoluene (2,4‐DNT), 2,6‐dinitrotoluene (2,6‐DNT), 2‐amino‐4,6‐dinitrotoluene (2A‐4,6‐DNT) and 4‐amino‐2,6‐dinitrotoluene (4A‐2,6‐DNT) were analyzed by ESI‐MS in the negative ion mode; they produced mainly deprotonated molecules [M ? H]^?. Subsequent low resolution MSⁿ experiments provided support for fragment ion assignments and determination of consecutive dissociation pathways. Resonant activation of deprotonated dinitrotoluene isomers gave different fragment ions according to the position of the nitro and amino groups on the toluene backbone. Fragment ion identification was bolstered by accurate mass measurements performed using Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR/MS). Notably, unexpected results were found from accurate mass measurements performed at high resolution for 2,6‐DNT where a 30‐Da loss was observed that corresponds to CH₂O departure instead of the expected isobaric NO^? loss. Moreover, 2,4‐DNT showed a diagnostic fragment ion at m/z 116, allowing the unambiguous distinction between 2,4‐ and 2,6‐DNT isomers. Here, CH₂O loss is hindered by the presence of an amino group in both 2A‐4,6‐DNT and 4A‐2,6‐DNT isomers, but nevertheless, these isomers showed significant differences in their fragmentation sequences, thus allowing their differentiation. DFT calculations were also performed to support experimental observations. Copyright © 2014 John Wiley & Sons, Ltd.     

Energy‐resolved mass spectrometry for differentiation of the fluorine substitution position on the phenyl ring of fluoromethcathinones

A reliable method for structural analysis is crucial for the forensic investigation of new psychoactive substances (NPSs). Towards this end, mass spectrometry is one of the most efficient and facile methods for the identification of NPSs. However, the differentiation among 2‐, 3‐, and 4‐fluoromethcathinones (o‐, m‐, and p‐FMCs), which are ring‐fluorinated positional isomers part of the major class of NPSs referred to as synthetic cathinones, remains a challenge. This is mostly due to their similar retention properties and nearly identical full scan mass spectra, which hinder their identification. In this study, we describe a novel and practical method for differentiating the fluorine substitution position on the phenyl ring of FMCs, based on energy‐resolved mass spectrometry (ERMS) using an electron ionization‐triple quadrupole mass spectrometer. ERMS measurements showed that the three FMC positional isomers exhibited differences in relative abundances of both the fluorophenyl cation (m/z 95) and the fluorobenzoyl cation (m/z 123). The logarithmic plots of the abundance ratio of these two cations (m/z 95 to m/z 123) as a function of the collision energy (CE) followed the order of o‐FMC < p‐FMC < m‐FMC at each CE, which allowed the three isomers to be unambiguously and reliably differentiated. The theoretical dissociation energy calculations confirmed the relationship obtained by ERMS analyses, and additional ERMS measurements of methylmethcathinone positional isomers showed that the differences in abundance among the FMCs were attributed to the differences in their collision‐induced dissociation reactivities arising from the halogen‐induced resonance effects on the phenyl ring. Moreover, the method for differentiation described herein was successfully applied to the actual samples containing seized drugs. We expect that the described methodology will also contribute significantly to the reliable and accurate structural identification of NPSs in the fields of therapeutic, clinical, and forensic toxicology.     

A novel azocompound, 2‐(4‐phenylazoaniline)‐4‐phenylphenol: Spectroscopic and quantum‐chemical approach

A novel azocompound with two nonequivalents azo groups, 2‐(4‐phenylazoaniline)‐4‐phenylphenol, was synthesized and characterized by spectroscopic and computational analysis. An intramolecular hydrogen bonding (HB), ? O₁? H₁ ··· N₁? , involving the ? N₁?N₂? group and the proton in a neighbor hydroxyl moiety, was identified. It was found responsible for a characteristic π‐conjugated H₁? O₁? C₁₈?C₁₃? N₂?N₁? six‐membered cyclic fragment. It is worth noting that this azo group is involved in an azo‐hydrazo equilibrium, being the azo form the most stable one. This resonance‐assisted HB was characterized using the OH‐related infrared bands and the corresponding signals in ¹H NMR. In addition, conformational studies and geometrical and electronic parameter calculations were performed using the density functional theory, at B3LYP/6‐311++G** level. Bond and ring critical points were identified using the atoms in molecules theory, which allowed confirming the intramolecular HB. The second azo‐group cannot be involved in HB, but it also presents two stereoisomerics forms corresponding to cis (Z) and trans (E) configurations, with the later being the one with the lowest energy. © 2013 Wiley Periodicals, Inc.     

Characterization of an exception to the ‘even‐electron rule’ upon low‐energy collision induced decomposition in negative ion electrospray tandem mass spectrometry

Electrospray‐generated precursor ions usually follow the ‘even‐electron rule’ and yield ‘closed shell’ fragment ions. We characterize an exception to the ‘even‐electron rule.’ In negative ion electrospray mass spectrometry (ES‐MS), 2‐(ethoxymethoxy)‐3‐hydroxyphenol (2‐hydroxyl protected pyrogallol) easily formed a deprotonated molecular ion (M‐H)^? at m/z 183. Upon low‐energy collision induced decomposition (CID), the m/z 183 precursor yielded a radical ion at m/z 124 as the base peak. The radical anion at m/z 124 was still the major fragment at all tested collision energies between 0 and 50 eV (E_lab). Supported by computational studies, the appearance of the radical anion at m/z 124 as the major product ion can be attributed to the combination of a low reverse activation barrier and resonance stabilization of the product ions. Furthermore, our data lead to the proposal of a novel alternative radical formation pathway in the protection group removal of pyrogallol. Copyright © 2009 John Wiley & Sons, Ltd.     

Competitive homolytic and heterolytic decomposition pathways of gas‐phase negative ions generated from aminobenzoate esters

An alkyl‐radical loss and an alkene loss are two competitive fragmentation pathways that deprotonated aminobenzoate esters undergo upon activation under mass spectrometric conditions. For the meta and para isomers, the alkyl‐radical loss by a homolytic cleavage of the alkyl‐oxygen bond of the ester moiety is the predominant fragmentation pathway, while the contribution from the alkene elimination by a heterolytic pathway is less significant. In contrast, owing to a pronounced charge‐mediated ortho effect, the alkene loss becomes the predominant pathway for the ortho isomers of ethyl and higher esters. Results from isotope‐labeled compounds confirmed that the alkene loss proceeds by a specific γ‐hydrogen transfer mechanism that resembles the McLafferty rearrangement for radical cations. Even for the para compounds, if the alkoxide moiety bears structural motifs required for the elimination of a more stable alkene molecule, the heterolytic pathway becomes the predominant pathway. For example, in the spectrum of deprotonated 2‐phenylethyl 4‐aminobenzoate, m/z 136 peak is the base peak because the alkene eliminated is styrene. Owing to the fact that all deprotonated aminobenzoate esters, irrespective of the size of the alkoxy group, upon activation fragment to form an m/z 135 ion, aminobenzoate esters in mixtures can be quantified by precursor ion discovery mass spectrometric experiments. Copyright © 2016 John Wiley & Sons, Ltd.     

Head‐to‐Tail Intermolecular Hydrogen Bonding of OH and NH Groups with Fluoride

To explore the anion‐recognition ability of the phenolic hydroxyl group and the amino hydrogen, we synthesized three different acridinedione (ADD) based anion receptors, 1 , 2 and 3 , having OH, NH, and combination of OH and NH groups, respectively. Absorption, emission and ¹H NMR spectral studies revealed that receptor 1 , having only a phenolic OH group, shows selective deprotonation of the hydroxyl proton towards F^?, which results in an “ON–OFF”‐type signal in the fluorescence spectral studies. Receptor 2 , which only has an amino hydrogen, also shows deprotonation of the amino hydrogen with F^?, whereas receptor 3 (having both OH and NH groups) shows head‐to‐tail intermolecular hydrogen bonding of OH and NH groups with F^? prior to deprotonation. The observation of hydrogen bonding of the OH and NH groups in a combined solution of 1 and 2 with F^? in a head‐to‐tail hetero‐intermolecular fashion, and the absence of head‐to‐head and tail‐to‐tail intermolecular hydrogen bonding in 1 and 2 with F^?, prove that the difference in the acidity of the OH and NH protons leads to the formation of an intermolecular hydrogen‐bonding complex with F^? prior to deprotonation. The presence of this hydrogen‐bonding complex was confirmed by absorption spectroscopy, 3D emission contour studies, and ¹H NMR titration.     

Intramolecular Hydrogen Bonds Quench Photoluminescence and Enhance Photocatalytic Activity of Carbon Nanodots

Understanding the photoluminescence (PL) and photocatalytic properties of carbon nanodots (CNDs) induced by environmental factors such as pH through surface groups is significantly important to rationally tune the emission and photodriven catalysis of CNDs. Through adjusting the pH of an aqueous solution of CNDs, it was found that the PL of CNDs prepared by ultrasonic treatment of glucose is strongly quenched at pH 1 because of the formation of intramolecular hydrogen bonds among the oxygen‐containing surface groups. The position of the strongest PL peak and its corresponding excitation wavelength strongly depend on the surface groups. The origins of the blue and green emissions of CNDs are closely related to the carboxyl and hydroxyl groups, respectively. The deprotonated COO^? and CO^? groups weaken the PL peak of the CNDs and shift it to the red. CNDs alone exhibit photocatalytic activity towards degradation of Rhodamine B at different pH values under UV irradiation. The photocatalytic activity of the CNDs is the highest at pH 1 because of the strong intramolecular hydrogen bonds formed among the oxygen‐containing groups.     

Dynamic Properties of Molecular Tweezers with a Bis(2‐hydroxyphenyl)pyrimidine Backbone

4,6‐Bis(2‐hydroxyphenyl)‐2‐alkylpyrimidines with two anthryl or 9‐ethylnylanthryl substituents at the positions para to the OH groups prefer a U‐shaped conformation supported by two intramolecular OH ??? N hydrogen bonds in the solid state and in CDCl₃ solution. The compound with a hexyl substituent on the pyrimidine group and two 9‐ethynylanthryl arms at the hydroxyphenyl groups forms a 1:1 complex with 2,4,7‐trinitrofluorenone. Its association constant K_a was estimated to be 2100 M ^?1 at 298 K, which is larger than those of other molecular tweezers (K_a<1000 M ^?1). DFT calculations suggested that the complex adopts a stable conformation supported by intramolecular hydrogen bonds among the OH groups and the pyrimidine ring as well as by intermolecular π–π interaction between the anthryl groups and 2,4,7‐trinitrofluorenone. Addition of nBu₄NF to a solution of the molecular tweezers or their complexes causes the cleavage of one or two OH ??? N hydrogen bonds, formation of new O ??? HF hydrogen bonds, and changes in the molecular conformation. The resulting structure of the molecular tweezers contains nonparallel anthryl groups, which do not bind the guest molecule. Photochemical measurements on 4,6‐bis(2‐hydroxyphenyl)‐2‐methylpyrimidine with two anthryl substituents showed negligible luminescence (quantum yield ?<0.01), owing to photoinduced electron transfer of the molecule with a U‐shaped structure. However, the O‐hexylated compound exhibits emission from the anthryl groups with ?=0.39.     

Combining UV photodissociation action spectroscopy with electron transfer dissociation for structure analysis of gas‐phase peptide cation‐radicals

We report the first example of using ultraviolet (UV) photodissociation action spectroscopy for the investigation of gas‐phase peptide cation‐radicals produced by electron transfer dissociation. z ‐Type fragment ions ^●Gly‐Gly‐Lys⁺, coordinated to 18‐crown‐6‐ether (CE), are generated, selected by mass and photodissociated in the 200–400 nm region. The UVPD action spectra indicate the presence of valence‐bond isomers differing in the position of the C_α radical defect, (α‐Gly)‐Gly‐Lys⁺(CE), Gly‐(α‐Gly)‐Lys⁺(CE) and Gly‐Gly‐(α‐Lys⁺)(CE). The isomers are readily distinguishable by UV absorption spectra obtained by time‐dependent density functional theory (TD‐DFT) calculations. In contrast, conformational isomers of these radical types are calculated to have similar UV spectra. UV photodissociation action spectroscopy represents a new tool for the investigation of transient intermediates of ion‐electron reactions. Specifically, z ‐type cation radicals are shown to undergo spontaneous hydrogen atom migrations upon electron transfer dissociation. Copyright © 2015 John Wiley & Sons, Ltd.     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

The Controlled Formation and Cleavage of an Intramolecular d8–d8 Pt–Pt Interaction in a Dinuclear Cycloplatinated Molecular “Pivot‐Hinge”

The bis(diphenylphosphino)methane (dppm)‐bridged dinuclear cycloplatinated complex {[Pt(L)]₂(μ‐dppm)}²⁺ (Pt₂ ? dppm; HL: 2‐phenyl‐6‐(1H‐pyrazol‐3‐yl)‐pyridine) demonstrates interesting reversible “pivot‐hinge”‐like intramolecular motions in response to the protonation/deprotonation of L. In its protonated “closed” configuration, the two platinum(II) centers are held in position by intramolecular d⁸–d⁸ Pt–Pt interaction. In its deprotonated “open” configuration, such Pt–Pt interaction is cleaved. To further understand the mechanism behind this hingelike motion, an analogous dinuclear cycloplatinated complex, {[Pt(L)]₂(μ‐dchpm)}²⁺ (Pt₂ ? dchpm) with bis(dicyclohexylphosphino)methane (dchpm) as the bridging ligand, was synthesized. From its protonation/deprotonation responses, it was revealed that aromatic π–π interactions between the phenyl moieties of the μ‐dppm and the deprotonated pyrazolyl rings of L was essential to the reversible cleavage of the intramolecular Pt–Pt interaction in Pt₂ ? dppm. In the case of Pt₂ ? dchpm, spectroscopic and spectrofluorometric titrations as well as X‐ray crystallography indicated that the distance between the two platinum(II) centers shrank upon deprotonation, thus causing a redshift in its room‐temperature triplet metal–metal‐to‐ligand charge‐transfer emission from 614 to 625 nm. Ab initio calculations revealed the presence of intramolecular hydrogen bonding between the deprotonated and negatively charged 1‐pyrazolyl‐N moiety and the methylene CH and phenyl C–H of the μ‐dppm. The “open” configuration of the deprotonated Pt₂ ? dppm was estimated to be 19 kcal mol^?1 more stable than its alternative “closed” configuration. On the other hand, the open configuration of the deprotonated Pt₂ ? dchpm was 6 kcal mol^?1 less stable than its alternative closed configuration.     

Structures of [M(Ura‐H)(H2O)n]+ (M = Mg,Ca, Sr,Ba; n = 1–3) complexes in the gas phase by IRMPD spectroscopy and theoretical studies

The structures of singly and doubly (and for Mg, triply) hydrated group 2 metal dications bound to deprotonated uracil were explored in the gas phase using infrared multiple photon dissociation spectroscopy in the mid‐infrared region (1000–1900 cm^?1) and the O–H/N–H stretching region (2700–3800 cm^?1) in a Fourier transform ion cyclotron resonance mass spectrometer. The infrared multiple photon dissociation spectra were then compared with the computed IR spectra for various isomers. Calculations were performed using B3LYP with the 6‐31 + G(d,p) basis set for all atoms except Ba²⁺ and Sr²⁺, for which the LANL2DZ or the def2‐TZVPP basis sets with relativistic core potentials were used. Atoms‐in‐molecules analysis was conducted for all lowest energy structures. The lowest energy isomers in all cases are those in which the one uracil is deprotonated at the N3 position, and the metal is coordinated to the N3 and O4 of uracil. Regardless of the degree of solvation, all water molecules are bound to the metal ion and participate in a hydrogen bond with a carbonyl of the uracil moiety. Copyright © 2016 John Wiley & Sons, Ltd.     

Heterocyclic ring cleavage upon collision‐induced dissociation of deprotonated 3‐hydroxy‐1,2,5‐oxadiazoles (3‐hydroxyfurazans)

A series of 4‐substituted 3‐hydroxyfurazans were subjected to electrospray ionization tandem mass spectrometry. At low collision energy, oxyisocyanate ([O=C=N–O]^?, m/z 58) was formed as the predominant product ion from each deprotonated 3‐hydroxyfurazan, indicating cleavage of the heterocyclic ring. The facile energetics of this characteristic fragmentation process was confirmed by density functional computations.     

Star‐shaped poly(L‐lactide)s with variable numbers of hydroxyl groups at polyester arms chain‐ends and directly attached to the star‐shaped core—Controlled synthesis and characterization

Star‐shaped poly(L ‐lactide)s (PLAs) bearing variable numbers of secondary hydroxyl groups at linear arms chain‐ends and primary hydroxyl groups directly attached to dipentaerithritol core (DPE) ((HO)_6?xDPE(PLA‐OH)_x, where x = 1–6) were prepared and then analyzed by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, MALDI‐TOF mass spectrometry, and eventually by Liquid Chromatography at Critical Conditions (LC‐CC). First, starting from DPE(OH)₆ a series of polyols with various number of hydroxyl groups has been obtained ((BnO)_6?xDPE(OH)_x, where Bn denotes benzyl moiety and x = 1–6). The living ring‐opening polymerization of L ‐lactide (LA) with (BnO)_6?xDPE(OH)_x/tin(II) octoate mixtures as initiating and catalytic system led to star‐shaped (BnO)_6?xDPE(PLA‐OH)_x polymers with molar masses (M_n) controlled by LA and DPE concentrations ratio in the feed. Finally, deprotection (via hydrogenation) gave a series of (HO)_6?xDPE(PLA‐OH)_x PLA's. SEC (with Multiangle Laser Light Scattering Detector (MALLS)), NMR, and MALDI‐TOF analyses confirmed the assumed structures and M_n's of the prepared (BnO)_6?xDPE(PLA‐OH)_x and (HO)_6?xDPE(PLA‐OH)_x PLA's. LC‐CC measurements revealed that for (BnO)_6?xDPE (PLA‐OH)_x series the elution volumes increase monotonically with the increasing number of –PLA‐OH arms in one macromolecule and are independent on the given PLA molar mass because of the critical conditions. Contrary to the polymers having the protected core hydroxyl groups, the elution volume for (HO)_6?xDPE(PLA‐OH)_x series decreases with the increasing number of ‐PLA‐OH arms reaching a minimum value for 4‐arm PLA and then slightly increases for 5‐ and 6‐arm PLA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6116–6133, 2005     

Deamination of the Radical Cation of the Base Moiety of 2′‐Deoxycytidine: A Theoretical Study

Five pathways leading to the deamination of cytosine (to uracil) after formation of its deprotonated radical cation are investigated in the gas phase, at the UB3LYP/6‐311G(d,p) level of theory, and in bulk aqueous solvent. The most favorable pathway involves hydrogen‐atom transfer from a water molecule to the N3 nitrogen of the deprotonated radical cation, followed by addition of the resulting hydroxyl radical to the C4 carbon of the cytosine derivative. Following protonation of the amino group (N4), the C4? N4 bond is broken with elimination of the NH₃^?+ radical and formation of a protonated uracil. The rate‐determining step of this mechanism is hydrogen‐atom transfer from a water molecule to the cytosine derivative. The associated free energy barrier is 70.2 kJ mol^?1.     

Synthesis,characterization, and hyperpolarizability measurements of main‐chain azobenzene molecules

A series of new AB type azobenzene monomers based on various substituted phenols and higher order fused/extended aromatic rings were synthesized and their hyperpolarizability tensor β determined by hyper‐Rayleigh scattering (HRS) measurement in methanol. The electron donor (? OH) and acceptor units (? COOH) were kept constant in the series, but the effective conjugation length was varied by varying the number and position of substituents as well as the number of aromatic rings. The effect of substitution of the phenolic ring on the β value was investigated and it was found to range from 15 × 10^?30 to 42 × 10^?30 esu. The effect of intramolecular hydrogen bonding on the nonlinear optical (NLO) property was also examined. The nonlinearity was in the following order of phenol derivative: α‐naphthol > phenyl phenol > 2,6‐dimethyl phenol > o‐cresol > cardanol > phenol > β‐naphthol. The unusually low values for the β‐naphthol‐based chromophore compared with its isomer (α‐naphthol) could be rationalized based on hydrogen bonding of the o‐hydroxyl group with the β nitrogen of the azo bridge. These azobenzene NLO chromophoric monomers were polymerized to form main‐chain polymers with a head to tail structure. The polymers had high thermal stability and rather low solubility in common organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4455–4468, 2005     

Estimation of peptide N–Cα bond cleavage efficiency during MALDI‐ISD using a cyclic peptide

Matrix‐assisted laser desorption/ionization in‐source decay (MALDI‐ISD) induces N–C_α bond cleavage via hydrogen transfer from the matrix to the peptide backbone, which produces a c′/z? fragment pair. Subsequently, the z? generates z′ and [z + matrix] fragments via further radical reactions because of the low stability of the z?. In the present study, we investigated MALDI‐ISD of a cyclic peptide. The N–C_α bond cleavage in the cyclic peptide by MALDI‐ISD produced the hydrogen‐abundant peptide radical [M + 2H]⁺? with a radical site on the α‐carbon atom, which then reacted with the matrix to give [M + 3H]⁺ and [M + H + matrix]⁺. For 1,5‐diaminonaphthalene (1,5‐DAN) adducts with z fragments, post‐source decay of [M + H + 1,5‐DAN]⁺ generated from the cyclic peptide showed predominant loss of an amino acid with 1,5‐DAN. Additionally, MALDI‐ISD with Fourier transform‐ion cyclotron resonance mass spectrometry allowed for the detection of both [M + 3H]⁺ and [M + H]⁺ with two ¹³C atoms. These results strongly suggested that [M + 3H]⁺ and [M + H + 1,5‐DAN]⁺ were formed by N–C_α bond cleavage with further radical reactions. As a consequence, the cleavage efficiency of the N–C_α bond during MALDI‐ISD could be estimated by the ratio of the intensity of [M + H]⁺ and [M + 3H]⁺ in the Fourier transform‐ion cyclotron resonance spectrum. Because the reduction efficiency of a matrix for the cyclic peptide cyclo(Arg‐Gly‐Asp‐D‐Phe‐Val) was correlated to its tendency to cleave the N–C_α bond in linear peptides, the present method could allow the evaluation of the efficiency of N–C_α bond cleavage for MALDI matrix development. Copyright © 2016 John Wiley & Sons, Ltd.     

Generation of gas‐phase sodiated arenes such as [(Na3(C6H4)+] from benzene dicarboxylate salts

Upon collision‐induced activation, gaseous sodium adducts generated by electrospray ionization of disodium salts of 1,2‐ 1,3‐, and 1,4‐benzene dicarboxylic acids (m/z 233) undergo an unprecedented expulsion of CO₂ by a rearrangement process to produce an ion of m/z 189 in which all three sodium atoms are retained. When isolated in a collision cell of a tandem‐in‐space mass spectrometer, and subjected to collision‐induced dissociation (CID), only the m/z 189 ions derived from the meta and para isomers underwent a further CO₂ loss to produce a peak at m/z 145 for a sodiated arene of formula (Na₃C₆H₄)⁺. This previously unreported m/z 145 ion, which is useful to differentiate meta and para benzene dicarboxylates from their ortho isomer, is in fact the sodium adduct of phenelenedisodium. Moreover, the m/z 189 ion from all three isomers readily expelled a sodium radical to produce a peak at m/z 166 for a radical cation [(^?C₆H₄CO₂Na₂)⁺], which then eliminated CO₂ to produce a peak at m/z 122 for the distonic cation (^?C₆H₄Na₂)⁺. Copyright © 2009 John Wiley & Sons, Ltd.     

Reactivity of gaseous sodiated ions derived from benzene dicarboxylate salts toward residual water in the collision gas

The sodium adduct of disodium salts of benzene dicarboxylic acids (m/z 233), when subjected to collision‐induced dissociation (CID), undergoes a facile loss of CO₂ to produce an ion of m/z 189, which retains all the three sodium atoms of the precursor. The CID spectrum of this unusual m/z 189 ion shows significant peaks at m/z 167, 63 and 85. The enigmatic m/z 167 ion, which appeared to represent a loss of a 22‐Da neutral fragment from the precursor ion is in fact a fragment produced by the interaction of the m/z 189 ion with traces of water present in the collision gas. The change of the m/z 167 peak to 168, when D₂O vapor was introduced to the collision gas of a Q‐ToF instrument, proved that such an intervention of water could occur even in collision cells of tandem‐in‐space mass spectrometers. The m/z 189 ion has such high affinity for water; it forms an ion/molecule complex even during the brief residence time of ions in collision cells of triple quadrupole instruments. The complex formed in this way then eliminates elements of NaOH to produce the ion observed at m/z 167. In an ion trap, the relative intensity of the m/z 167 peak increases with longer activation time even at the lowest possible collision energy setting. Similarly, the m/z 145 ion (which represents the sodium adduct of phenelenedisodium, formed by two consecutive losses of CO₂ from the m/z 233 ion of meta‐ and para‐isomers) interacts with water to produce a fragment ion at m/z 123 for the sodium adduct of phenylsodium. Other uncommon ions that originate also from water/ion interactions are observed at m/z 85 and 63 for [Na₃O]⁺ and [Na₂OH]⁺, respectively. Tandem mass spectrometric experiments conducted with appropriately deuterium‐labeled compounds confirmed that the proton required for the formation of the [Na₂OH]⁺ ion originates from traces of water present in the collision gas and not from the ring protons of the aromatic moiety. Copyright © 2010 John Wiley & Sons, Ltd.     

P4VP and oligo(phenylenevinylene)‐perylenebisimide mixed donor‐acceptor supramolecular comb polymer complexes with improved charge carrier mobility

Random donor‐acceptor (D‐A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN‐OH ) and Perylenebisimide (named UPBI‐PDP ), respectively, were complexed with Poly(4‐vinyl pyridine) (P4VP). A series of random D‐A supramolecular comb polymers were formed by varying the ratios of UPBI‐PDP and OPVCN‐OH with P4VP. A 100% P4VP‐donor polymer complex [ P4VP(OPV_1.00 )] and a 100% P4VP‐acceptor polymer complex [ P4VP(UPBI_1.00 )] were also synthesized and characterized. Complex formation was confirmed by FT‐IR and ¹H NMR spectroscopy. Solid state structural studies carried out using small angle X‐ray scattering and wide angle X‐ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the < 10 nm scale for the P4VP(OPV_1.00 ), P4VP(UPBI_1.00 ), and mixed P4VP (D‐A) complexes. The effect of the nanoscopic D‐A self‐assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D‐A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV_0.25 + UPBI_0.75) exhibited an average hole mobility in the order of 10^?2cm² V^?1 s^?1 and electron mobility 10^?5cm² V^?1 s^?1. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2403–2412