Estimation of peptide N–Cα bond cleavage efficiency during MALDI‐ISD using a cyclic peptide

Matrix‐assisted laser desorption/ionization in‐source decay (MALDI‐ISD) induces N–C_α bond cleavage via hydrogen transfer from the matrix to the peptide backbone, which produces a c′/z? fragment pair. Subsequently, the z? generates z′ and [z + matrix] fragments via further radical reactions because of the low stability of the z?. In the present study, we investigated MALDI‐ISD of a cyclic peptide. The N–C_α bond cleavage in the cyclic peptide by MALDI‐ISD produced the hydrogen‐abundant peptide radical [M + 2H]⁺? with a radical site on the α‐carbon atom, which then reacted with the matrix to give [M + 3H]⁺ and [M + H + matrix]⁺. For 1,5‐diaminonaphthalene (1,5‐DAN) adducts with z fragments, post‐source decay of [M + H + 1,5‐DAN]⁺ generated from the cyclic peptide showed predominant loss of an amino acid with 1,5‐DAN. Additionally, MALDI‐ISD with Fourier transform‐ion cyclotron resonance mass spectrometry allowed for the detection of both [M + 3H]⁺ and [M + H]⁺ with two ¹³C atoms. These results strongly suggested that [M + 3H]⁺ and [M + H + 1,5‐DAN]⁺ were formed by N–C_α bond cleavage with further radical reactions. As a consequence, the cleavage efficiency of the N–C_α bond during MALDI‐ISD could be estimated by the ratio of the intensity of [M + H]⁺ and [M + 3H]⁺ in the Fourier transform‐ion cyclotron resonance spectrum. Because the reduction efficiency of a matrix for the cyclic peptide cyclo(Arg‐Gly‐Asp‐D‐Phe‐Val) was correlated to its tendency to cleave the N–C_α bond in linear peptides, the present method could allow the evaluation of the efficiency of N–C_α bond cleavage for MALDI matrix development. Copyright © 2016 John Wiley & Sons, Ltd.     

Atmospheric pressure laser desorption/ionization using a 6–7 µm‐band mid‐infrared tunable laser and liquid water matrix

Due to the characteristic absorption peaks in the IR region, various molecules can be used as a matrix for infrared matrix‐assisted laser desorption/ionization (IR‐MALDI). Especially in the 6–7 µm‐band IR region, solvents used as the mobile phase for liquid chromatography have absorption peaks that correspond to their functional groups, such as O–H, CO, and CH₃. Additionally, atmospheric pressure (AP) IR‐MALDI, which is applicable to liquid‐state samples, is a promising technique to directly analyze untreated samples. Herein we perform AP‐IR‐MALDI mass spectrometry of a peptide, angiotensin II, using a mid‐IR tunable laser with a tunable wavelength range of 5.50–10.00 µm and several different matrices. The wavelength dependences of the ion signal intensity of [M + H]⁺ of the peptide are measured using a conventional solid matrix, α‐cyano‐4‐hydroxycinnamic acid (CHCA) and a liquid matrix composed of CHCA and 3‐aminoquinoline. Other than the O–H stretching and bending vibration modes, the characteristic absorption peaks are useful for AP‐IR‐MALDI. Peptide ions are also observed from an aqueous solution of the peptide without an additional matrix, and the highest peak intensity of [M + H]⁺ is at 6.00 µm, which is somewhat shorter than the absorption peak wavelength of liquid water corresponding to the O–H bending vibration mode. Moreover, long‐lasting and stable ion signals are obtained from the aqueous solution. AP‐IR‐MALDI using a 6–7 µm‐band IR tunable laser and solvents as the matrix may provide a novel on‐line interface between liquid chromatography and mass spectrometry. Copyright © 2015 John Wiley & Sons, Ltd.     

Laser‐induced decomposition of 2,2‐dimethoxy‐2‐phenylacetophenone and benzoin in methyl methacrylate homopolymerization studied via matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Pulsed laser polymerization (PLP) experiments were performed on the bulk polymerization of methyl methacrylate (MMA) at ?34 °C. The aim of this study was to investigate the polymer end groups formed during the photoinitiation process of MMA monomer using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA) and benzoin as initiators via matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Analysis of the MALDI‐TOF spectra indicated that the two radical fragments generated upon pulsed laser irradiation show markedly different reactivity toward MMA: whereas the benzoyl fragment—common to both DMPA and benzoin—clearly participates in the initiation process, the acetal and benzyl alcohol fragments cannot be identified as end groups in the polymer. The complexity of the MALDI‐TOF spectrum strongly increased with increasing laser intensity, this effect being more pronounced in the case of benzoin. This indicates that a cleaner initiation process is at work when DMPA is used as the photoinitiator. In addition, the MALDI‐TOF spectra were analyzed to extract the propagation‐rate coefficient, k_p, of MMA at ?34 °C. The obtained value of k_p = 43.8 L mol^?1 s^?1 agrees well with corresponding numbers obtained via size exclusion chromatography (k_p = 40.5 L mol^?1 s^?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 675–681, 2002; DOI 10.1002/pola.10150     

Generation of 8‐oxo‐7,8‐dihydroguanine in G‐Quadruplexes Models of Human Telomere Sequences by One‐electron Oxidation

The mechanistic aspects of one‐electron oxidation of G‐quadruplexes in the basket (Na⁺ ions) and hybrid (K⁺ ions) conformations were investigated by transient absorption laser kinetic spectroscopy and HPLC detection of the 8‐oxo‐7,8‐dihydroguanine (8‐oxoG) oxidation product. The photo‐induced one‐electron abstraction from G‐quadruplexes was initiated by sulfate radical anions (SO₄˙^?) derived from the photolysis of persulfate ions by 308 nm excimer laser pulses. In neutral aqueous solutions (pH 7.0), the transient absorbance of neutral guanine radicals, G(‐H)˙, is observed following the complete decay of SO₄˙^? radicals (~10 μs after the actinic laser flash). In both basket and hybrid conformations, the G(‐H)˙ decay is biphasic with one component decaying with a lifetime of ~0.1 ms, and the other with a lifetime of 20–30 ms. The fast decay component (~0.1 ms) in G‐quadruplexes is correlated with the formation of 8‐oxoG lesions. We propose that in G‐quadruplexes, G(‐H)˙ radicals retain radical cation character by sharing the N1‐proton with the O⁶‐atom of G in the [G˙⁺: G] Hoogsteen base pair; this [G(‐H)˙: H⁺G G˙⁺: G] leads to the hydration of G˙⁺ radical cation within the millisecond time domain, and is followed by the formation of the 8‐oxoG lesions.     

Detection of Radical Adducts with Small Molecular Weights by Matrix-Assisted Laser Desorption/Ionization with Fourier Transform Mass Spectrometry

As an alternative method, matrix-assisted laser desorption/ionization with Fourier transform mass spectrometry （MALDI-FTMS） has been successfully used to detect and identify free radical adducts with small molecular weights of hydroxyl and 2-cyano-2-propyl radicals trapped with 5,5-dimethylpyrroline N-oxide （DMPO）. The detection and identification by MS/MS experiments using sustained offresonance irradiation collision-induced dissociation （SORI-CID） of [（DMPO＋·OH-·H）＋H^＋] （m/z 130.0868） and [DMPO＋2 ·CH（CH3）2CN＋H^＋] （m/z 250.1917） have demonstrated that MALDI-FTMS could be an effective method for detection and identification of free radical adducts. Other radical adducts have been also detected and identified. The approach of MALDI-FTMS is simple, fast, and sensitive which has potential for high-throughput analysis.     

The effect of temperature on the stability of compounds used as UV‐MALDI‐MS matrix: 2,5‐dihydroxybenzoic acid, 2,4,6‐trihydroxyacetophenone, α‐cyano‐4‐hydroxycinnamic acid, 3,5‐dimethoxy‐4‐hydroxycinnamic acid,nor‐harmane and harmane

The thermal stability of several commonly used crystalline matrix‐assisted ultraviolet laser desorption/ionization mass spectrometry (UV‐MALDI‐MS) matrices, 2,5‐dihydroxybenzoic acid (gentisic acid; GA), 2,4,6‐trihydroxyacetophenone (THA), α‐cyano‐4‐hydroxycinnamic acid (CHC), 3,5‐dimethoxy‐4‐hydroxycinnamic acid (sinapinic acid; SA), 9H‐pirido[3,4‐b]indole (nor‐harmane; nor‐Ho), 1‐methyl‐9H‐pirido[3,4‐b]indole (harmane; Ho), perchlorate of nor‐harmanonium ([nor‐Ho + H]⁺) and perchlorate of harmanonium ([Ho + H]⁺) was studied by heating them at their melting point and characterizing the remaining material by using different MS techniques [electron ionization mass spectrometry (EI‐MS), ultraviolet laserdesorption/ionization‐time‐of‐flight‐mass spectrometry (UV‐LDI‐TOF‐MS) and electrospray ionization‐time‐of‐flight‐mass spectrometry (ESI‐TOF‐MS)] as well as by thin layer chromatography analysis (TLC), electronic spectroscopy (UV‐absorption, fluorescence emission and excitation spectroscopy) and ¹H nuclear magnetic resonance spectroscopy (¹H‐NMR). In general, all compounds, except for CHC and SA, remained unchanged after fusion. CHC showed loss of CO₂, yielding the trans‐/cis‐4‐hydroxyphenylacrilonitrile mixture. This mixture was unambiguously characterized by MS and ¹H‐NMR spectroscopy, and its sublimation capability was demonstrated. These results explain the well‐known cluster formation, fading (vanishing) and further recovering of CHC when used as a matrix in UV‐MALDI‐MS. Commercial SA (SA 98%; trans‐SA/cis‐SA 5 : 1) showed mainly cis‐ to‐trans thermal isomerization and, with very poor yield, loss of CO₂, yielding (3′,5′‐dimethoxy‐4′‐hydroxyphenyl)‐1‐ethene as the decarboxilated product. These thermal conversions would not drastically affect its behavior as a UV‐MALDI matrix as happens in the case of CHC. Complementary studies of the photochemical stability of these matrices in solid state were also conducted. Copyright © 2008 John Wiley & Sons, Ltd.     

Dereplication of known pregnane glycosides and structural characterization of novel pregnanes in Marsdenia tenacissima by high‐performance liquid chromatography and electrospray ionization‐tandem mass spectrometry

In the search for novel natural products in plants, particularly those with potential bioactivity, it is important to efficiently distinguish novel compounds from previously isolated, known compounds, a process known as dereplication. In this study, electrospray ionization‐multiple stage tandem mass spectrometry (ESI‐MSⁿ) was used to study the behaviour of 12 pregnane glycosides and genins previously isolated from Marsdenia tenacissima, a traditional Chinese medicinal plant, as a basis for dereplication of compounds in a plant extract. In addition to [M + Na]⁺ and [M + NH₄]⁺ ions, a characteristic [M‐glycosyl + H]⁺ ion was observed in full‐scan mode with in‐source fragmentation. Sequential in‐trap collision‐induced dissociation of [M + Na]⁺ ions from 11,12‐diesters revealed consistent preferred losses of substituents first from C‐12, then from C‐11, followed by losses of monosaccharide fragments from the C‐3 tri‐ and tetrasaccharide substituents. A crude methanol extract of M. tenacissima stems was analysed using high‐performance liquid chromatography coupled to ESI‐MS. Several previously isolated pregnane glycosides were dereplicated, and the presence of an additional nine novel pregnane glycosides is predicted on the basis of the primary and fragment ions observed, including two with a previously unreported C₄H₇O C‐11/C‐12 substituent of pregnane glycosides. This study is the first report of prediction of the structures of novel pregnane glycosides in a crude plant extract by a combination of in‐source fragmentation and in‐trap collision‐induced dissociation and supports the usefulness of LC‐ESI‐MSⁿ not only for dereplication of active compounds in extracts of medicinal plants but also for detecting the presence of novel related compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetics of Surface-Induced Dissociation of N(CH3) 4 + and N(CD3) 4 + Using Silicon Nanoparticle Assisted Laser Desorption/Ionization and Laser Desorption/Ionization

The implementation of surface-induced dissociation (SID) to study the fast dissociation kinetics (sub-microsecond dissociation) of peptides in a MALDI TOF instrument has been reported previously. Silicon nanoparticle assisted laser desorption/ionization (SPALDI) now allows the study of small molecule dissociation kinetics for ions formed with low initial source internal energy and without MALDI matrix interference. The dissociation kinetics of N(CH₃)₄⁺ and N(CD₃)₄⁺ were chosen for investigation because the dissociation mechanisms of N(CH₃)₄⁺ have been studied extensively, providing well-characterized systems to investigate by collision with a surface. With changes in laboratory collision energy, changes in fragmentation timescale and dominant fragment ions were observed, verifying that these ions dissociate via unimolecular decay. At lower collision energies, methyl radical (CH₃) loss with a sub-microsecond dissociation rate is dominant, but consecutive H loss after CH₃ loss becomes dominant at higher collision energies. These observations are consistent with the known dissociation pathways. The dissociation rate of CH₃ loss from N(CH₃)₄⁺ formed by SPALDI and dissociated by an SID lab collision energy of 15 eV corresponds to log k = 8.1, a value achieved by laser desorption ionization (LDI) and SID at 5 eV. The results obtained with SPALDI SID and LDI SID confirm that (1) the dissociation follows unimolecular decay as predicted by RRKM calculations; (2) the SPALDI process deposits less initial energy than LDI, which has advantages for kinetics studies; and (3) fluorinated self-assembled monolayers convert about 18% of laboratory collision energy into internal energy. SID TOF experiments combined with SPALDI and peak shape analysis enable the measurement of dissociation rates for fast dissociation of small molecules.     

BASHD‐J‐resolved‐COSY: a new method for measuring proton‐proton spin coupling constants of multiplet signals

An effective pulse sequence for measuring H–H coupling constants, named BASHD‐J‐resolved‐COSY, has been developed. In the spin systems such as –CH_A–CH_B(CH₃)–CH_C–, a methine proton H_B splits into a multiplet owing to several vicinal couplings, resulting in attenuation of its cross‐peak intensity. Therefore, the measurements of ³J_H–H with respect to H_B are generally difficult in the E‐COSY‐type experiments. With the aim of accurate measurements of ³J_H‐H in such a spin system, we have developed a new pulse sequence, which selectively decouples the secondary methyl group. The proposed pulse sequence provides the simplified cross‐peak patterns, which are suitable for reliable measurements of ³J_H‐H in a complicated natural product. Copyright © 2012 John Wiley & Sons, Ltd.     

Peptide backbone fragmentation initiated by side‐chain loss at cysteine residue in matrix‐assisted laser desorption/ionization in‐source decay mass spectrometry

Matrix‐assisted laser desorption/ionization in‐source decay (MALDI‐ISD) is initiated by hydrogen transfer from matrix molecules to the carbonyl oxygen of peptide backbone with subsequent radical‐induced cleavage leading to c′/z? fragments pair. MALDI‐ISD is a very powerful method to obtain long sequence tags from proteins or to do de novo sequencing of peptides. Besides classical fragmentation, MALDI‐ISD also shows specific fragments for which the mechanism of formation enlightened the MALDI‐ISD process. In this study, the MALDI‐ISD mechanism is reviewed, and a specific mechanism is studied in details: the N‐terminal side of Cys residue (Xxx‐Cys) is described to promote the generation of c′ and w fragments in MALDI‐ISD. Our data suggest that for sequences containing Xxx‐Cys motifs, the N–C_α bond cleavage occurs following the hydrogen attachment to the thiol group of Cys side‐chain. The c?/w fragments pair is formed by side‐chain loss of the Cys residue with subsequent radical‐induced cleavage at the N–C_α bond located at the left side (N‐terminal direction) of the Cys residue. This fragmentation pathway preferentially occurs at free Cys residue and is suppressed when the cysteines are involved in disulfide bonds. Hydrogen attachment to alkylated Cys residues using iodoacetamide gives free Cys residue by the loss of ?CH₂CONH₂ radical. The presence of alkylated Cys residue also suppress the formation of c?/w fragments pair via the (C_β)‐centered radical, whereas w fragment is still observed as intense signal. In this case, the z? fragment formed by hydrogen attachment of carbonyl oxygen followed side‐chain loss at alkylated Cys leads to a w fragment. Hydrogen attachment on peptide backbone and side‐chain of Cys residue occurs therefore competitively during MALDI‐ISD process. Copyright © 2013 John Wiley & Sons, Ltd.     

Mass spectrometry of rhenium complexes: a comparative study by using LDI‐MS,MALDI‐MS,PESI‐MS and ESI‐MS

A group of rhenium (I) complexes including in their structure ligands such as CF₃SO₃‐, CH₃CO₂‐, CO, 2,2′‐bipyridine, dipyridil[3,2‐a:2′3′‐c]phenazine, naphthalene‐2‐carboxylate, anthracene‐9‐carboxylate, pyrene‐1‐carboxylate and 1,10‐phenanthroline have been studied for the first time by mass spectrometry. The probe electrospray ionization (PESI) is a technique based on electrospray ionization (ESI) that generates electrospray from the tip of a solid metal needle. In this work, mass spectra for organometallic complexes obtained by PESI were compared with those obtained by classical ESI and high flow rate electrospray ionization assisted by corona discharge (HF‐ESI‐CD), an ideal method to avoid decomposition of the complexes and to induce their oxidation to yield intact molecular cation radicals in gas state [M]^+. and to produce their reduction yielding the gas species [M]^–.. It was found that both techniques showed in general the intact molecular ions of the organometallics studied and provided additional structure characteristic diagnostic fragments. As the rhenium complexes studied in the present work showed strong absorption in the UV–visible region, particularly at 355 nm, laser desorption ionization (LDI) mass spectrometry experiments could be conducted. Although intact molecular ions could be detected in a few cases, LDI mass spectra showed diagnostic fragments for characterization of the complexes structure. Furthermore, matrix‐assisted laser desorption ionization (MALDI) mass spectra were obtained. Nor‐harmane, a compound with basic character, was used as matrix, and the intact molecular ions were detected in two examples, in negative ion mode as the [M]^–. species. Results obtained with 2‐[(2E)‐3‐(4‐tert‐buthylphenyl)‐2‐methylprop‐2‐enylidene] malononitrile (DCTB) as matrix are also described. LDI experiments provided more information about the rhenium complex structures than did the MALDI ones. Copyright © 2012 John Wiley & Sons, Ltd.     

Dehydrogenation and dehalogenation of amines in MALDI‐TOF MS investigated by isotopic labeling

Secondary and tertiary amines have been reported to form [M–H]⁺ that correspond to dehydrogenation in matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF MS). In this investigation, we studied the dehydrogenation of amines in MALDI‐TOF MS by isotopic labeling. Aliphatic amines were labeled with deuterium on the methylene of an N‐benzyl group, which resulted in the formation of [M–D]⁺ and [M–H]⁺ ions by dedeuteration and dehydrogenation, respectively. This method revealed the proton that was removed. The spectra of most tertiary amines with an N‐benzyl group showed high‐intensity [M–D]⁺ and [M–H]⁺ ion peaks, whereas those of secondary amines showed low‐intensity ion peaks. Ratios between the peak intensities of [M–D]⁺ and [M–H]⁺ greater than 1 suggested chemoselective dehydrogenation at the N‐benzyl groups. The presence of an electron donor group on the N‐benzyl groups enhanced the selectivity. The dehalogenation of amines with an N‐(4‐halobenzyl) group was also observed alongside dehydrogenation. The amino ions from dehalogenation can undergo second dehydrogenation. These results provide the first direct evidence about the position at which dehydrogenation of an amine occurs and the first example of dehalogenation of haloaromatic compounds in MALDI‐TOF MS. These results should be helpful in the structural identification and elucidation of synthetic and natural molecules. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification of complex,naturally occurring flavonoid glycosides in kale (Brassica oleracea var. sabellica) by high‐performance liquid chromatography diode‐array detection/electrospray ionization multi‐stage mass spectrometry

Kale is a member of the Brassicaceae family and has a complex profile of flavonoid glycosides. Therefore, kale is a suitable matrix to discuss in a comprehensive study the different fragmentation patterns of flavonoid glycosides. The wide variety of glycosylation and acylation patterns determines the health‐promoting effects of these glycosides. The aim of this study is to investigate the naturally occurring flavonoids in kale. A total of 71 flavonoid glycosides of quercetin, kaempferol and isorhamnetin were identified using a high‐performance liquid chromatography diode‐array detection/electrospray ionization multi‐stage mass spectrometry (HPLC‐DAD/ESI‐MSⁿ) method. Of these 71 flavonol glycosides, 27 were non‐acylated, 30 were monoacylated and 14 were diacylated. Non‐acylated flavonol glycosides were present as mono‐, di‐, tri‐ and tetraglycosides. This is the first time that the occurrence of four different fragmentation patterns of non‐acylated flavonol triglycosides has been reported in one matrix simultaneously. In addition, 44 flavonol glycosides were acylated with p‐coumaric, caffeic, ferulic, hydroxyferulic or sinapic acid. While monoacylated glycosides existed as di‐, tri‐ and tetraglycosides, diacylated glycosides occurred as tetra‐ and pentaglycosides. To the best of our knowledge, 28 compounds in kale are reported here for the first time. These include three acylated isorhamnetin glycosides (isorhamnetin‐3‐O‐sinapoyl‐sophoroside‐7‐O‐D‐glucoside, isorhamnetin‐3‐O‐feruloyl‐sophoroside‐7‐O‐diglucoside and isorhamnetin‐3‐O‐disinapoyl‐triglucoside‐7‐O‐diglucoside) and seven non‐acylated isorhamnetin glycosides. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel proximity effects and Ortho interactions in 2,2′-disubstituted diphenylamines on electron impact

Unexpected ejections of CH₃NO₂/[^˙CH₃ + ^˙NO₂], N₂O₄/[^˙NO₂ + ^˙NO₂] and CH₃OCH₃/[^˙CH₃ + ^˙OCH₃] were observed from the molecular ions of 2-methoxy-2′-nitrodiphenylamine, 2,2′-dinitrodiphenylamine and 2,2′-dimethoxydiphenylamine, respectively, under electron impact conditions owing to proximity effects. In other competing fragmentation pathways, novel proximity effects triggered by the ortho interactions leading to the unusual eliminations of [^˙CH₃ + H₂O] from M^+˙ of 2-methoxy-2′-nitrodiphenylamine and HNO₃/[^˙NO₂ + ^˙OH] from M^+˙ of 2,2′-dinitrodiphenylamine were observed. Evidence for the interpretation of the main fragmentation pathways was obtained from the metastable ion spectra and high-resolution mass spectrometry. Confirmation of the structures assigned to the ions was provided by collision-activated dissociation mass-analysed ion kinetic energy spectra.     

norHarmane containing ionic liquid matrices for low molecular weight MALDI‐MS carbohydrate analysis: The perfect couple with α‐cyano‐4‐hydroxycinnamic acid

Cinnamic acid derivatives, particularly α‐cyano‐4‐hydroxycinnamic acid (E‐α‐cyano‐4‐hydroxycinnamic acid or (E)‐2‐cyano‐3‐(4‐hydroxyphenyl)prop‐2‐enoate; CHCA), have been extensively used especially for protein and peptide analysis. Together with the introduction of ionic liquid MALDI matrix (ILM) started the study of applications of IL prepared with CHCA and a counter organic base (ie, aliphatic amines) in which CHCA moiety is the chromophore responsible of UV‐laser absorption. Despite the extensive studies of norharmane (9H‐pyrido[3,4‐b]indole; nHo) applications as matrix and its peculiar basic properties in the ground and electronic excited state, nHo containing ILM was never tested in MALDI‐MS experiments. This pyrido‐indole compound was introduced as MALDI matrix 22 years ago for different applications including low molecular weight (LMW) carbohydrates (neutral, acidic, and basic carbohydrates). These facts encouraged us to use it as a base, for the first time, for ILM preparation. As a rational design of new IL MALDI matrices, E‐α‐cyanocinnamic acid.nHo and E‐cinnamic acid.nHo were prepared and their properties as matrices studied. Their performance was compared with that of (a) the corresponding IL prepared with butylamine as basic component, (b) the corresponding crystalline E‐α‐cyanocinnamic and E‐cinnamic acid, and (c) the classical crystalline matrices (2,5‐dihydroxybenzoic acid, DHB; nHo) used in the analysis of neutral/sulfated carbohydrates. The IL DHB.nHo was tested, too. Herein, we demonstrate the outstanding performance for the IL CHCA.nHo for LMW carbohydrate in positive and negative ion mode (linear and reflectron modes). Sulfated oligosaccharides were detected in negative ion mode, and although the dissociation of sulfate groups was not completely suppressed the relative intensity (RI) of [M ? Na]^? peak was quite high. Additionally, to better understand the quite different performance of each IL tested as matrix, the physical and morphological properties in solid state were studied (optical image; MS image).     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Synthesis of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines from β‐alkoxy‐α,β‐unsaturated trihalomethyl ketones

The synthesis of a novel series of twelve 4‐(trihalomethyl)dipyrimidin‐2‐ylamines, from the cyclo‐condensation reaction of 4‐(trichloromethyl)‐2‐guanidinopyrimidine, with β‐alkoxyvinyl trihalomethyl ketones, of general formula: X₃C‐C(O)‐C(R²)=C(R¹)‐OR, where: X = F, Cl; R = Me, Et, ‐(CH₂)₂‐, ‐(CH₂)₃‐; R¹ = H, Me; R² = H, Me, ‐(CH₂)₂‐, ‐(CH₂)₃‐, is reported. The reactions were carried out in acetonitrile under reflux for 16 hours, leading to the dipyrimidin‐2‐ylamines in 65‐90% yield. Depending on the substituents of the vinyl ketone, tetrahydropyrimidines or aromatic pyrimidine rings were obtained from the cyclization reaction. When X = Cl, elimination of the trichloromethyl group was observed during the cyclization step. The structure of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines was studied in detail by ¹H‐, ¹³C‐ and 2D‐nmr spectroscopy.     

Determination of block size in poly(ethylene oxide)‐b‐polystyrene block copolymers by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Characterization of block size in poly(ethylene oxide)‐b‐poly(styrene) (PEO‐b‐PS) block copolymers could be achieved by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) after scission of the macromolecules into their constituent blocks. The performed hydrolytic cleavage was demonstrated to specifically occur on the targeted ester function in the junction group, yielding two homopolymers consisting of the constitutive initial blocks. This approach allows the use of well‐established MALDI protocols for a complete copolymer characterization while circumventing difficulties inherent to amphiphilic macromolecule ionization. Although the labile end‐group in PS homopolymer was modified by the MALDI process, PS block size could be determined from MS data since polymer chains were shown to remain intact during ionization. This methodology has been validated for a PEO‐b‐PS sample series, with two PEO of number average molecular weight (M_n) of 2000 and 5000 g mol^?1 and M_n(PS) ranging from 4000 to 21,000 g mol^?1. Weight average molecular weight (M_w), and thus polydispersity index, could also be reached for each segment and were consistent with values obtained by size exclusion chromatography. This approach is particularly valuable in the case of amphiphilic copolymers for which M_n values as determined by liquid state nuclear magnetic resonance might be affected by micelle formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3380–3390, 2009     

Analysis of dammar resin with MALDI‐FT‐ICR‐MS and APCI‐FT‐ICR‐MS

Comprehensive analysis of high‐resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT‐ICR‐MS) using matrix‐assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two‐component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI‐FT‐ICR‐MS analysis were dichloromethane‐acetone and dichloromethane‐ethanol. The obtained MALDI‐FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420–2200, and the obtained APCI‐FTMS mass spectrum contains three clusters of peaks in the m/z range of 380–910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C₁₅H₂₄ units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI‐FTMS and APCI‐FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI‐FTMS and APCI‐FTMS mass spectrum, besides the oxidized C₃₀, triterpenoids also peaks corresponding to C₂₉ and C₃₁ derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na⁺ adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition. Copyright © 2012 John Wiley & Sons, Ltd.     

Darzens reaction of 2‐bromo‐4,6‐dimethoxy‐3(2H)‐benzofuranone with aromatic aldehydes to form flavonoids

The applicability of 2‐bromo‐4,6‐dimethoxy‐3(2H)‐benzofuranone ( 1 ) to produce flavonoid‐derived epoxides in the course of the Darzens reaction with aldehydes was investigated. However, instead of the epoxides, flavonols 3 and, in certain cases, benzofuranyl‐substituted flavonols 4 were isolated. The generation of 3 is assumed due to a ring expansion of the initially formed epoxides. These flavonols can react with 1 to produce the unexpected 1:2 adducts 4 as minor products. The structure of the hexamethoxy derivative 4b (R¹ = H, R² = R³ = OMe) was confirmed by X‐ray crystallographic analysis.