Peptide anchored Langmuir–Blodgett films of a fullerene amphiphile

A new amphiphilic derivative of fullerene C₆₀ bearing an oligoglycyl tail (C₆₀CHCOgly₂OEt, 2) formed stable Langmuir floating films at the air–water interface. This occurred when the molecular assembly was stabilized by anchoring the amphiphilic C₆₀'s to the aqueous subphase, via hydrogen bonding interactions between a dipeptide (Gly–L–Leu) dissolved in the water subphase, and the oligoglycyl chain. The compression (π−A) isotherm of the Langmuir floating film constructed in such a way showed no hysteresis, was steep, and evidenced that the monolayer collapsed at a surface pressure π65 mN m⁻¹, thus confirming that the film was tightly packed, extremely stable, and rigid. A limiting area per molecule of 89.1 Ų was extrapolated, in agreement with the calculated cross-section area of the C₆₀ fullerene. On the contrary, when the dipeptide was absent and pure water was used as the subphase, the π−A isotherm yielded a limiting area <55 Ų which indicated the formation of multiple layers; moreover it showed significant hysteresis, the film was fragile, and it collapsed at π≈50 mN m⁻¹. Once anchored by the dipeptide, the floating monolayer of 2 could be transferred onto hydrophobic quartz, glass and silicon substrates, by successive vertical dipping cycles, each cycle made up of two down-strokes and two up-strokes, to yield the Langmuir–Blodgett film. Up to 200 down- and up-strokes could be repeated reproducibly, a noteworthy result for non-covalently assembled LB films of fullerenes. The transfer ratio was 1.0, except for the second down-stroke of each cycle that gave a transfer ratio of zero, making the sequence of successful transfers: D, U, U, (cleaning and spreading), D, U, U, (cleaning and spreading), and so on (D=down-stroke, U=up-stroke). The total number of deposited layers was therefore 150. X-ray diffraction spectra were registered and exhibited a peak, which was fitted by a Montecarlo method of simulation to obtain the distribution of the repeat unit responsible for scattering; such distribution, with thickness between 20 and 60 Å, was consistent with the size of the amphiphile and the transfer sequence. The UV–Vis spectra of the LB film exhibited the characteristic C₆₀ bands, and the absorption peaks in the 200–400 nm range were proportional to the number of layers, indicating that the deposition was reproducible and that the molecular environment of C₆₀ in each layer remained constant.     

Langmuir–Blodgett films of pyridinium-dicyanomethanide dyes mixtures with photobleachable absorption bands

We report on Langmuir-Blodgett (LB) films characterization of 4-[5-dicyanomethanido)thien-2-y1]-N-(n-hexadecyl)pyridinium (C₁₆H₃₃-PDCNT), and 1-(N-(n-hexadecy]-4-pyridinio)-2-[5-(dicyanomethanido)thien-2-yl]ethene (C₁₆H₃₃-PDCNTE); LB films of the pure compounds and of the mixtures of the two compounds were prepared at 291 K: UV-vis investigation revealed the presence of photobleachable absorption bands, the ones at about 530 nm and 640 nm were due to charge transfer transitions of the monomer of C16H33-PDCNT and C₁₆H₃₃-PDCNTE, respectively; the sharp, photobleachable ones shifted to shorter wavelengths were due to H-aggregates of the two compounds. By changing the molar ratios of the two compounds in the mixtures and in other cases by annealing the LB films, the absorption maxima of the sharp, photobleachable bands due to H-aggregates could be tuned in the range 415–467 nm. These LB films are thus very promising in view of optical data storage applications.     

Infrared studies of pyroelectric Langmuir–Blodgett films of arachidic acid and 1,2-bis(dodecyloxy)-4,5-diaminobenzene

Fourier Transform Infrared (FTIR), p-polarized grazing angle (GAIR) and Horizontal Attenuated Total Reflectance (HATR) spectra have been recorded of arachidic acid (AA)/1,2-bis(dodecyloxy)-4,5-diaminobenzene (DADB) Y-type alternate LB films deposited on an aluminium plate with 31 layers. It is well known that the frequencies of CH₂ stretching bands of a hydrocarbon chain are sensitive to the conformational ordering of the chain. Changes in frequency and intensity can be used to characterize film ordering and preferential molecular packing. The observed peak frequencies and intensities of these bands indicate that the alkyl chains are present in a mostly trans conformation and tilted from the normal direction with respect to the substrate in LB films. The FTIR–GAIR and HATR spectra of 31 layers alternate film show significant changes in the region 1700–1400 cm⁻¹ due to the partial proton transfer between acid and amine head groups. According to the HATR spectrum, the peak at 1731 cm⁻¹ is observed due to a proportion of the carboxylic acid groups forming sideways dimers indicating that if the carboxylic acid groups form sideways dimers, they are less likely to undergo proton transfer with the amino groups.     

Long-lived photoinduced charge separation in carbazole–pyrene–viologen system incorporated in Langmuir–Blodgett films of substituted diazacrown ethers

Diaza-18-crown-6 ethers appending two pyrenyl (Py) or two carbazolyl (Cz) groups were synthesized. These macrocyclic compounds form 1:1 host–guest complexes with methyl viologen chloride (MV²⁺), and these complexes were assembled into monolayers by Langmuir–Blodgett technique. The generated assembly involves the general structure of donor–sensitizer–acceptor (Cz–Py–MV²⁺) in space, although any of the photo- and redox-active components are not covalently bonded. Photoirradiation of the pyrenyl group resulted in the charge-separated pair Cz√⁺–Py–MV√⁺ which survived up to hours in a well anaerobic atmosphere. An electrode was fabricated by transferring the L–B film on an ITO glass. The photoinduced voltage of this electrode was measured with a saturated calomel reference electrode in hydroquinone (H₂Q) solution to be ca. 168 mV when the light intensity was 218 mW/cm². This electrode was also used as the light electrode to construct a photogalvanic cell with a platinum electrode as the dark electrode. Irradiation of the light electrode with visible light results in anodic photocurrent, and there is no net chemical change associated with the function of the cell which converts light to electricity.     

Biocatalytic Langmuir–Blodgett assemblies based on penicillin G acylase

The recently developed ‘protective plate’ method offers the possibility to include protein layers into a Langmuir–Blodgett (LB) assembly without contact of protein molecules with the air–water interface thus avoiding their denaturation. In the present work, this technique was applied for the deposition of biocatalysts with active layers of penicillin G acylase (PGA), an enzyme widely used for medicine production. Easy selection of LB and adsorbed layers resulted in the creation of appropriate environments for the preservation of PGA functions. Two structures were tested regarding such performances as the enzymatic activity value and the level of PGA detachment in aqueous solutions. It was shown that they satisfy the requirements for biocatalytic applications. The enzymatic activity of PGA monolayer incorporated into the film reached 25–30% of the activity value of the equivalent amount of protein in the solution, which is a good result for an immobilized enzyme. Further modification of the deposition procedure resulted in increasing the effective activity per unit of the substrate surface due to adsorption of a thicker protein layer in one cycle. Probably, a three-dimensional frame-like structure was formed, which allowed the substrate molecules to penetrate into the film. The enzymatic activity of such films per unit of the substrate surface was 20–25 times higher than that of the assemblies with one adsorbed monolayer. Finally, the method is proposed of biocatalytic LB assembly deposition onto flexible supports of practically unlimited length without the exposure of protein layer to air medium.     

Molecular positional order in a dipalmitoylphosphatidic acid Langmuir–Blodgett monolayer by atomic force microscopy

Langmuir–Blodgett monolayers of dipalmitoylphosphatidic acid were studied by using atomic force microscopy on the large- and nano-scale. A molecularly resolved image was achieved at high surface pressure. The monolayer shows a dramatic long-range orientational and positional ordering of molecular organization of aliphatic tails. The ordered molecular arrangement of aliphatic tails may result from the strong intermolecular hydrogen bonding interactions between adjacent phosphate groups in the polar region.     

Photoelectrical properties of Langmuir–Blodgett films of poly(methyl phenylsilane)s

Langmuir–Blodgett (LB) films were prepared from poly(methylphenylsilane) bearing electron acceptor π-conjugated substituents. The small limiting area (0.078 nm²) per one repeating unit of polysilane (PSi) in monomolecular film and the large thickness of the film (6 nm) suggest that the polymer chains are not fully spread on water surface. The electrical and photoelectrical properties of Al/LB film/Au sandwich cells containing various numbers of the polysilane layers were studied. Holes were transported from the Al electrode through the LB film to the Au electrode when the light was absorbed by the polysilane. The highest photovoltaic effect occurred in the first monolayer of polysilane at the Al contact. The cell resistivity and the photovoltage were decreased by parallel conductance of defects in the films consisting of small numbers of PSi layers.     

Supramolecular self-assembly study of a flexible perylenetetracarboxylic diimide dimer in Langmuir and Langmuir–Blodgett films

A novel perylenetetracarboxylic diimide molecule (2PDI-TAZ), which contains two perylenetetracarboxylic diimide (PDI) attached to a melamine headgroup, was designed and synthesized. Supramolecular self-assemblies were studied in Langmuir and Langmuir–Blodgett films. Surface pressure–area isotherm measurements and the spectroscopic studies indicate that the 2PDI-TAZ molecules adopted a face-to-face configuration and edge-on orientation in Langmuir or the multilayer LB films. The presence of the barbituric acid in subphase change the hydrophilicity of 2PDI-TAZ due to the hydrogen bonding between melamine and barbituric acid, which has been revealed by the π–A isotherms and the FT-IR spectra. Transmission electron microscopy images of the LB films deposited from the barbituric acid solution revealed uniform nanowire morphology while the X-ray diffraction studies indicate that the molecules in the solid film packed with high order. The strong excimer emission of 2PDI-TAZ in LB films suggests enforced face-to-face configuration for the PDI unites in LB films in relative to that in solution.     

细胞色素P450的电化学研究进展

细胞色素P450的电化学研究从一个侧面反映了为使细胞色素P450达到工业催化剂的最终目的人们所作的不懈努力。本文从细胞色素P450在电极上的电子转移研究,隧道扫描显微镜的微观成像研究和使用电极作为细胞色素P450的电子给体从而实现细胞色素P450底物转化三方面,评述了近年来细胞色素P450的电化学研究进展。     

Electrochemical study of the interaction between cytochrome P450sccK201E and cholesterol

Cytochrome P450sccK201E, mutated form of cytochrome P450scc native recombinant (P450sccNR), was employed to study the enzyme–substrate interaction. The detection of the cholesterol was performed by electrochemical method using cyclic voltammetry (CV) and chronoamperometry measurements. The biochemical analysis was realized to observe the electrochemical responses of the engineerized enzyme to three different forms of cholesterol: free, low-density lipoprotein (LDL) and high-density lipoproteins (HDL). Compared to cytochrome P450sccNR, the cytochrome P450sccK201E displays a different behavior in the interaction with the substrate detection.

The results show that the engineerized enzyme can be utilized for the cholesterol detection in biosensor field.     

Langmuir monolayers and Langmuir–Blodgett films of 1-acyl-1,2,4-triazoles

New 1-acyl-1,2,4-triazoles (ATs) with different n-alkyl chain lengths from C2 to C18 were synthesized. ATs with long n-alkyl chains (C12 and larger) are non-charged amphiphilic molecules with a polar triazole head group. The Langmuir isotherms of ATs at the air–water interface with 12 (DoT-C12), 14 (MyT-C14), 16 (PaT-C16) and 18 (StT-C18) carbon atoms in their n-alkyl chains were studied using surface pressure-mean molecular area (π-mmA) measurements. Characteristic for the Langmuir isotherms of PaT-C16 and StT-C-18 was the first sharp increase of the surface pressure at a mmA value of 20 Å² marking a transition of the ATs from the gaseous state with n-alkyl chains already oriented perpendicular to the water surface to a condensed state. The collapse of the monolayers occurred between 20 and 36 mN m⁻¹ with a typical ‘spike’ in the isotherms of MyT-C14, PaT-C16 and StT-C18 which can be assigned to the buckling and subsequent folding of the monolayer. After the collapse point a pseudo-plateau region of slightly increasing surface pressure appeared for all ATs from C12 to C18 indicating a trilayer formation by the roll-over mechanism for MyT-C14, PaT-C16 and StT-C18. Upon further compression the final collapse occurred at π values between 59 and 67 mN m⁻¹. From reversibility studies it was found that the Langmuir isotherms of the ATs were irreversible. The morphology of Langmuir–Blodgett films of ATs transferred onto silicon wafers was studied by atomic force microscopy.     

Amphiphilic Organic–Inorganic Hybrid Zeotype Aluminosilicate like a Nanoporous Crystallized Langmuir–Blodgett Film

A new organic–inorganic hybrid zeotype compound with amphiphilic one‐dimensional nanopore and aluminosilicate composition was developed. The framework structure is composed of double aluminosilicate layers and 12‐ring nanopores; a hydrophilic layer pillared by Q² silicon atom species and a lipophilic layer pillared by phenylene groups are alternately stacked, and 12‐ring nanopores perpendicularly penetrate the layers. The framework topology looks similar to that of an AFI‐type zeolite but possesses a quasi‐multidimensional pore structure consisting of a 12‐ring channel and intersecting small pores equivalent to 8‐rings. The hybrid material with alternately laminated lipophilic and hydrophilic nanospaces can be assumed as a crystallized Langmuir–Blodgett film. It demonstrates microporous adsorption for both hydrophilic and lipophilic adsorptives, and its outer surface tightly adsorbs lysozyme whose molecular size is much larger than its micropore opening. Our results suggest the possibility of designing porous adsorbent with high amphipathicity.     

Engineering and assaying of cytochrome P450 biocatalysts

Cytochrome P450s constitute a highly fascinating superfamily of enzymes which catalyze a broad range of reactions. They are essential for drug metabolism and promise industrial applications in biotechnology and biosensing. The constant search for cytochrome P450 enzymes with enhanced catalytic performances has generated a large body of research. This review will concentrate on two key aspects related to the identification and improvement of cytochrome P450 biocatalysts, namely the engineering and assaying of these enzymes. To this end, recent advances in cytochrome P450 development are reported and commonly used screening methods are surveyed.     

Exploring the Effect of Ligand Structural Isomerism in Langmuir–Blodgett Films of Chiral Luminescent EuIII Self‐Assemblies

Here we have investigated the influence of the antenna group position on both the formation of chiral amphiphilic Eu^III‐based self‐assemblies in CH₃CN solution and, on the ability to form monolayers on the surface of quartz substrates using the Langmuir–Blodgett technique, by changing from the 1‐naphthyl ( 2(R) , 2(S) ) to the 2‐naphthyl ( 1(R) , 1(S) ) position. The evaluation of binding constants of the self‐ assemblies in CH₃CN solution was achieved using conventional techniques such as UV/Visible and luminescence spectroscopies along with more specific circular dichroism (CD) spectroscopy. The binding constants obtained for EuL , EuL₂ and EuL₃ species in the case of 2‐naphthyl derivatives were comparable to those obtained for 1‐naphthyl derivatives. The analysis of the changes in the CD spectra of 1(R) and 1(S) upon addition of Eu^III not only allowed us to evaluate the values of the binding constants but the resulting recalculated spectra may also be used as fingerprints for assignment of the chiral self‐assembly species formed in solution. The obtained monolayers were predominantly formed from EuL₃ (≈85 %) with the minor species present in ≈15 % EuL₂ .     

Study of recombinant cytochrome P450 2C9 activity with diclofenac by MEKC

Cytochrome P450 2C9 (CYP2C9) is one of the most important isoforms in human liver involved in the metabolism of a large number of therapeutic agents. The aim of this paper is to demonstrate the applicability of CE for the determination of the enzymatic activity of CYP2C9 with diclofenac as a probe substrate. MEKC with SDS as a pseudostationary phase was used for this purpose. Compared to other assays, the MEKC-based method is rapid, can be automated and requires only a small quantity of enzymes and substrate. Moreover, the enzymatic reaction can be monitored with high sensitivity and repeatability even when the reaction mixture is used for the analysis without any pretreatment. The kinetic study on the given enzymatic reaction was also performed since the basic characterization of drug biotransformation generally begins with the enzyme kinetic analysis of metabolite formation. As a result, the Michaelis constant and maximum reaction velocity were evaluated, the values 3.44 +/- 0.45 microM and 19.78 +/- 0.76 nmol min(-1) nmol(-1), respectively, were in agreement with the literature data. On the other hand, a slight deviation from typical Michaelis-Menten kinetics with a weak positive cooperativity was found at diclofenac concentrations below 2 microM. The same atypical kinetic behavior of CYP2C9 was also observed by other authors.     

Three‐Component Langmuir–Blodgett Films Consisting of Surfactant,Clay Mineral,and Lysozyme: Construction and Characterization

The Langmuir–Blodgett (L–B) technique has been employed for the construction of hybrid films consisting of three components: surfactant, clay, and lysozyme (Lys). The surfactants are octadecylammonium chloride (ODAH) and octadecyl ester of rhodamine B (RhB18). The clays include saponite and laponite. Surface pressure versus area isotherms indicate that lysozyme is adsorbed by the surfactant–clay L–B film at the air–water interface without phase transition. The UV‐visible spectra of the hybrid film ODAH–saponite–Lys show that the amount of immobilized lysozyme in the hybrid film is (1.3±0.2) ng mm^?2. The average surface area (Ω) per molecule of lysozyme is approximately 18.2 nm² in the saponite layer. For the multilayer film (ODAH–saponite–Lys)_n, the average amount of lysozyme per layer is (1.0±0.1) ng mm^?2. The amount of lysozyme found in the hybrid films of ODAH–laponite–Lys is at the detection limit of about 0.4 ng mm^?2. Attenuated total reflectance (ATR) FTIR spectra give evidence for clay layers, ODAH, lysozyme, and water in the hybrid film. The octadecylammonium cations are partially oxidized to the corresponding carbamate. A weak 1620 cm^?1 band of lysozyme in the hybrid films is reminiscent of the presence of lysozyme aggregates. AFM reveals evidence of randomly oriented saponite layers of various sizes and shapes. Individual lysozyme molecules are not resolved, but aggregates of about 20 nm in diameter are clearly seen. Some aggregates are in contact with the clay mineral layers, others are not. These aggregates are aligned in films deposited at a surface pressure of 20 mN m^?1.     

Development of immobilization techniques of cytochrome P450-GST fusion protein

Glutathione S-transferase (GST) fusion cytochrome P4502B4 enzyme obtained by genetic engineering was used in order to optimize the immobilization of the proteins on solid supports. Langmuir–Schaefer, ‘layer-by-layer (LbL)’ and self-assembling techniques were used to form thin films on solid surfaces. In particular, it was studied the possibility to realize alternated structures stabilized by binding affinity between GST-fusion protein and glutathione (GSH) using ‘LbL’ techniques. The characterization of the films was performed by means of π-A isotherms, Brewster angle microscopy and spectrophotometry. Preliminary analysis of the P4502B4 films functionality was realized monitoring the spin-state of the cytochrome P450 by spectrophotometric measurements.     

Direct electrochemistry of cytochrome P450 27B1 in surfactant films

We report the first direct electrochemistry of cytochrome P450 27B1 (CYP27B1) immobilized on an edge-plane pyrolytic graphite (EPG) electrode coated with a film of didodecyldimethylammonium bromide (DDAB). Cyclic voltammetry (CV) in a deoxygenated solution revealed excellent electrochemical reversibility with an average midpoint potential of −180 ± 5 mV vs. Ag/AgCl and an apparent surface coverage of (7.0 ± 2.5) × 10¹³ molecules per cm². The rate of heterogeneous electron transfer between CYP27B1 and the EPG electrode was determined to be 3.5 ± 0.6 s⁻¹. Upon addition of oxygen, a significant increase in cathodic current occurred, likely due to electrocatalytic reduction of dioxygen to peroxide and/or water by CYP27B1. Characterization of the electrochemical properties of CYP27B1 is an important first step toward developing a bioelectrochemical method for measuring vitamin D in serum.     

Self-assembled arrays of silica particles on the patterns reflecting the phase-separated structures of mixed Langmuir–Blodgett films

In this study, we constructed self-assembled arrays of silica particles on the micro- and nanopatterns of functionalized templates fabricated from phase-separated mixed Langmuir–Blodgett (LB) films. Electrostatic interaction between the carboxylic groups of silica particles and amino groups on the functionalized templates results in the formation of the self-assembled arrays of silica particles. The patterns of the silica particle arrays can be designed by controlling the phase-separated structures of the original mixed LB films.     

Synthesis of novel hybrid films of a layered silicate and alkylammonium cations on rough polymeric surfaces by Langmuir–Blodgett method

Hybrid films of a layered silicate and an amphiphilic alkylammonium (hexadecyltrimethylammonium) cation have been prepared by Langmuir–Blodgett (LB) method and transferred onto a polyamide surface by dip coating. This is the first time that stable LB hybrid monolayer and multilayer films have been formed on rough polymeric surfaces. The films were characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and water contact angle measurements. XRD and FTIR showed that the hybrid multilayer was well-organized and the thickness of one layer was calculated to be 1.6 nm. Furthermore, the layered silicate was determined to be on the substrate side and the amphiphilic molecule layer was exposed to the air side. This provides a novel methodology for the surface modification of polymers.