Xanthene-modified and hangman iron corroles

Iron corroles modified with a xanthene scaffold are delivered from easily available starting materials in abbreviated reaction times. These new iron corroles have been spectroscopically examined with particular emphasis on defining the oxidation state of the metal center. Investigation of their electronic structure using (57)Fe Mo?ssbauer spectroscopy in conjunction with density functional theory (DFT) calculations reveals the non-innocence of the corrole ligand. Although these iron corroles contain a formal Fe(IV) center, the deprotonated corrole macrocycle ligand is one electron oxidized. The electronic ground state of these complexes is best described as an intermediate spin S = 3/2 Fe(III) site strongly antiferromagnetically coupled to the S = 1/2 of the monoradical dianion corrole [Fe(III)Cl-corrole(+?)]. We show here that iron corroles as well as xanthene-modified and hangman xanthene iron corroles are redox active and catalyze the disproportionation of hydrogen peroxide via the catalase reaction, and that this activity scales with the oxidation potential. The meso position of corrole macrocycle is susceptible toward nucleophilic attack during catalase turnover. The reactivity of peroxide within the hangman cleft reported here adds to the emerging theme that corroles are good at catalyzing two-electron activation of the oxygen-oxygen bond in a variety of substrates.     

Electronic structure of high-valent transition metal corrolazine complexes. The young and innocent?

This is a first quantum chemical study of corrolazine complexes. DFT calculations suggest that despite their extremely contracted central cavities, compared with porphyrins, a variety of corrolazine complexes may be expected to exist as stable compounds. The calculations also indicate that corrolazine complexes may be regarded as strongly electron-deficient analogues of corrole complexes. Thus, the calculated valence ionization potentials of P(V) and Cu(III) corrolazine derivatives are dramatically higher than those of analogous corrole derivatives. In addition, DFT calculations on Fe(IV) and Mn(IV) corrole and corrolazine derivatives suggest that compared with the often noninnocent corrole ligands, corrolazines are electronically more innocent and stabilize "purer" high-valent states of transition metal ions.     

Electrochemical and Spectral Characterization of Iron Corroles in High and Low Oxidation States: First Structural Characterization of an Iron(IV) Tetrapyrrole pi Cation Radical

The electrochemistry and spectroscopic properties of three iron corroles were examined in benzonitrile, dichloromethane, and pyridine containing 0.1 M tetra-n-butylammonium perchlorate or tetra-n-ethylammonium hexafluorophosphate as supporting electrolyte. The investigated compounds are represented as (OEC)Fe(IV)(C(6)H(5)), (OEC)Fe(IV)Cl, and (OEC)Fe(III)(py), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. Each iron(IV) corrole undergoes two one-electron reductions and two or three one-electron oxidations depending upon the solvent. Under the same solution conditions, the iron(III) corrole undergoes a single one-electron reduction and one or two one-electron oxidations. Each singly oxidized and singly reduced product was characterized by UV-vis and/or EPR spectroscopy. The data indicate a conversion of (OEC)Fe(IV)(C(6)H(5)) and (OEC)Fe(IV)Cl to their iron(III) forms upon a one-electron reduction and to iron(IV) corrole pi cation radicals upon a one-electron oxidation. The metal center in [(OEC)Fe(III)(C(6)H(5))](-) is low spin (S = (1)/(2)) as compared to electrogenerated [(OEC)Fe(III)Cl](-), which contains an intermediate-spin (S = (3)/(2)) iron(III). (OEC)Fe(III)(py) also contains an intermediate-spin-state iron(III) and, unlike previously characterized (OEC)Fe(III)(NO), is converted to an iron(IV) corrole upon oxidation rather than to an iron(III) pi cation radical. Singly oxidized [(OEC)Fe(IV)(C(6)H(5))](*)(+) is the first iron(IV) tetrapyrrole pi cation radical to be isolated and was structurally characterized as a perchlorate salt. It crystallizes in the triclinic space group P&onemacr; with a = 10.783(3) ?, b = 13.826(3) ?, c = 14.151(3) ?, alpha = 78.95(2) degrees, beta = 89.59(2) degrees, and gamma = 72.98(2) degrees at 293 K with Z = 2. Refinement of 8400 reflections and 670 parameters against F(o)(2) yields R1 = 0.0864 and wR2 = 0.2293. The complex contains a five-coordinated iron with average Fe-N bond lengths of 1.871(3) ?. The formulation of the electron distribution in this compound was confirmed by M?ssbauer, X-ray crystallographic, and magnetic susceptibility data as well as by EPR spectroscopy, which gives evidence for strong antiferromagnetic coupling between the iron(IV) center and the singly oxidized corrole macrocycle.     

Cytochrome P450: an investigation of the Mössbauer spectra of a reaction intermediate and an Fe(IV)[double bond]O model system

We have carried out a series of density functional theory (DFT) calculations to predict the 57Fe M?ssbauer quadrupole splittings (DeltaEQ) and isomer shifts (deltaFe) for an Fe(IV)=O model compound ([Fe(O)(TMC)(NCCH3)](OTf)2, TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane, OTf = CF3SO3-) as well as a cytochrome P450 reaction intermediate (P450-RI). The DFT predictions on the model compound are in almost exact agreement with experiment. The same DFT methods did not enable the prediction of the experimental DeltaEQ results for P450-RI when using the experimental protein crystal structure and seven different spin/charge/protonation state combinations, but did permit good predictions of both DeltaEQ and deltaFe when using a geometry optimized structure having a porphyrin dianion, a protonated cysteine, and S = 1 (the same as that found from previous ESR studies).     

Structural analysis of the Mn(IV)/Fe(III) cofactor of Chlamydia trachomatis ribonucleotide reductase by extended X-ray absorption fine structure spectroscopy and density functional theory calculations

The class Ic ribonucleotide reductase from Chlamydia trachomatis ( Ct) uses a stable Mn(IV)/Fe(III) cofactor to initiate nucleotide reduction by a free-radical mechanism. Extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) calculations are used to postulate a structure for this cofactor. Fe and Mn K-edge EXAFS data yield an intermetallic distance of approximately 2.92 A. The Mn data also suggest the presence of a short 1.74 A Mn-O bond. These metrics are compared to the results of DFT calculations on 12 cofactor models derived from the crystal structure of the inactive Fe 2(III/III) form of the protein. Models are differentiated by the protonation states of their bridging and terminal OH X ligands as well as the location of the Mn(IV) ion (site 1 or 2). The models that agree best with experimental observation feature a mu-1,3-carboxylate bridge (E120), terminal solvent (H 2O/OH) to site 1, one mu-O bridge, and one mu-OH bridge. The site-placement of the metal ions cannot be discerned from the available data.     

Theoretical evidence favoring true iron(V)-oxo corrole and corrolazine intermediates

Although many formally FeV intermediates are known in the form of peroxidase compound I intermediates and their synthetic models, "true" d3 FeVO intermediates have remained elusive and hence a Holy Grail of sorts for many bioinorganic chemists. Very recently, Newcomb and co-workers provided transient absorption spectroscopic evidence suggestive of FeVO corrole intermediates. Here, we report DFT calculations predicting nearly isoenergetic FeVO and FeIVO corrolato2-* states for Fe(corrolato)(O) intermediates. In the course of a theoretical search for systems in which a true FeVO state might be favored by a clear and substantial margin of energy, we have identified corrolazine as a promising supporting ligand; thus, we find that with corrolazine, the FeVO states are favored by at least 0.5 eV over FeIVO corrolazinato2-* states.     

"True" iron(V) and iron(VI) porphyrins: a first theoretical exploration

We present here a first theoretical characterization of iron(V) (S = (3)/(2)) and iron(VI) (S = 0) porphyrin intermediates. The Fe(V) calculations exhibit exceptionally narrow convergence radii and we believe that for this reason they have long eluded researchers working on high-valent iron intermediates. The Fe(V)-N(nitrido) bond distance in the DFT(PW91/TZP) optimized geometry of Fe(V)(P)(N) is 1.722 A, comparable to and slightly longer than the Fe(IV)-O bond distance of 1.684 A in Fe(IV)(P)(O) and the Fe(IV)-N(imido) bond distance of 1.698 A in Fe(IV)(P)(NH). In contrast, the Fe(VI)-N(nitrido) bond distances in [Fe(VI)(P)(N)](+) (S = 0) and Fe(VI)(P)(N)(F) (S = 0) are dramatically shorter, 1.508 and 1.533 A, respectively, consistent with the formal triple bond character of the Fe(VI)-N(nitrido) bond. The nitrido ligand appears to be uniquely capable of stabilizing a "true" Fe(V) center, in the sense defined in the paper. All three unpaired electrons in Fe(V)(P)(N) are completely localized on the Fe(V)-N(nitrido) axis, with the Fe and N gross atomic spin populations being 1.579 and 1.550, respectively. In contrast, an axial ligand set consisting of an oxide and a fluoride do not stabilize an Fe(V) ground state but favor an electronic structure best described as an Fe(IV)-oxo porphyrin pi-cation radical.     

(TAML)FeIV O complex in aqueous solution: synthesis and spectroscopic and computational characterization

Recently, we reported the characterization of the S = (1)/ 2 complex [Fe (V)(O)B*] (-), where B* belongs to a family of tetraamido macrocyclic ligands (TAMLs) whose iron complexes activate peroxides for environmentally useful applications. The corresponding one-electron reduced species, [Fe (IV)(O)B*] (2-) ( 2), has now been prepared in >95% yield in aqueous solution at pH > 12 by oxidation of [Fe (III)(H 2O)B*] (-) ( 1), with tert-butyl hydroperoxide. At room temperature, the monomeric species 2 is in a reversible, pH-dependent equilibrium with dimeric species [B*Fe (IV)-O-Fe (IV)B*] (2-) ( 3), with a p K a near 10. In zero field, the M?ssbauer spectrum of 2 exhibits a quadrupole doublet with Delta E Q = 3.95(3) mm/s and delta = -0.19(2) mm/s, parameters consistent with a S = 1 Fe (IV) state. Studies in applied magnetic fields yielded the zero-field splitting parameter D = 24(3) cm (-1) together with the magnetic hyperfine tensor A/ g nbeta n = (-27, -27, +2) T. Fe K-edge EXAFS analysis of 2 shows a scatterer at 1.69 (2) A, a distance consistent with a Fe (IV)O bond. DFT calculations for [Fe (IV)(O)B*] (2-) reproduce the experimental data quite well. Further significant improvement was achieved by introducing hydrogen bonding of the axial oxygen with two solvent-water molecules. It is shown, using DFT, that the (57)Fe hyperfine parameters of complex 2 give evidence for strong electron donation from B* to iron.     

Ethynyl-bridged porphyrin-corrole dyads and triads: Synthesis,properties and DFT calculations

Ethynyl-bridged porphyrin-corrole dyads and triads were synthesized by using Pd(0) mediated coupling reactions and their structures were characterized by NMR, FT-IR, UV/Vis and fluorescence techniques. Besides spectroscopic techniques, computational studies at B3LYP/6-311G(d,p) level of DFT were also used to elucidate the minimum energy geometries and the molecular orbital characteristics of the new dyads and triads. DFT calculations pointed out the presence of charge separated donor-acceptor property between macrocycles of dyads and triads, and the emission studies indicated an excited state interaction between macrocycles, and energy transfer from the porphyrin to the corrole unit.     

Electron paramagnetic resonance and Mössbauer spectroscopy and density functional theory analysis of a high-spin Fe(IV)-oxo complex

High-spin Fe(IV)-oxo species are known to be kinetically competent oxidants in non-heme iron enzymes. The properties of these oxidants are not as well understood as the corresponding intermediate-spin oxidants of heme complexes. The present work gives a detailed characterization of the structurally similar complexes [Fe(IV)H(3)buea(O)](-), [Fe(III)H(3)buea(O)](2-), and [Fe(III)H(3)buea(OH)](-) (H(3)buea = tris[(N'-tert-butylureaylato)-N-ethylene]aminato) using M?ssbauer and dual-frequency/dual-mode electron paramagnetic resonance (EPR) spectroscopies. The [Fe(IV)H(3)buea(O)](-) complex has a high-spin (S = 2) configuration imposed by the C(3)-symmetric ligand. The EPR spectra of the [Fe(IV)H(3)buea(O)](-) complex presented here represent the first documented examples of an EPR signal from an Fe(IV)-oxo complex, demonstrating the ability to detect and quantify Fe(IV) species with EPR spectroscopy. Quantitative simulations allowed the determination of the zero-field parameter, D = +4.7 cm(-1), and the species concentration. Density functional theory (DFT) calculations of the zero-field parameter were found to be in agreement with the experimental value and indicated that the major contribution to the D value is from spin-orbit coupling of the ground state with an excited S = 1 electronic configuration at 1.2 eV. (17)O isotope enrichment experiments allowed the determination of the hyperfine constants ((17)O)A(z) = 10 MHz for [Fe(IV)H(3)buea(O)](-) and ((17)O)A(y) = 8 MHz, ((17)O)A(z) = 12 MHz for [Fe(III)H(3)buea(OH)](-). The isotropic hyperfine constant (((17)O)A(iso) = -16.8 MHz) was derived from the experimental value to allow a quantitative determination of the spin polarization (ρ(p) = 0.56) of the oxo p orbitals of the Fe-oxo bond in [Fe(IV)H(3)buea(O)](-). This is the first experimental determination for non-heme complexes and indicates significant covalency in the Fe-oxo bond. High-field M?ssbauer spectroscopy gave an (57)Fe A(dip) tensor of (+5.6, +5.3, -10.9) MHz and A(iso) = -25.9 MHz for the [Fe(IV)H(3)buea(O)](-) complex, and the results of DFT calculations were in agreement with the nuclear parameters of the complex.     

β-Nitro-5,10,15-tritolylcorroles

Functionalization of the β-pyrrolic positions of the corrole macrocycle with -NO(2) groups is limited at present to metallocorrolates due to the instability exhibited by corrole free bases under oxidizing conditions. A careful choice of the oxidant can limit the transformation of corroles into decomposition products or isocorrole species, preserving the corrole aromaticity, and thus allowing the insertion of nitro groups onto the corrole framework. Here we report results obtained by reacting 5,10,15-tritolylcorrole (TTCorrH(3)) with the AgNO(2)/NaNO(2) system, to give mono- and dinitrocorrole derivatives when stoichiometry is carefully controlled. Reactions were found to be regioselective, affording the 3-NO(2)TTCorrH(3) and 3,17-(NO(2))(2)TTCorrH(3) isomers as the main products in the case of mono- and disubstitution, in 53 and 20% yields, respectively. In both cases, traces of other mono- and disubstituted isomers were detected, which were structurally characterized by X-ray crystallography. The influence of the β-nitro substituents on the corrole properties is studied in detail by UV-visible, electrochemical, and spectroelectrochemical characterization of these functionalized corroles. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations of the ground and excited state properties of these β-nitrocorrole derivatives also afforded significant information, closely matching the experimental observations. It is found that the β-NO(2) substituents conjugate with the π-aromatic system of the macrocycle, which initiates significant changes in both the spectroscopic and redox properties of the so functionalized corroles. This effect is more pronounced when the nitro group is introduced at the 2-position, because in this case the conjugation is, for steric reasons, more efficient than in the 3-nitro isomer.     

Low-energy states of manganese-oxo corrole and corrolazine: multiconfiguration reference ab initio calculations

Manganese(V)-oxo corrole and corrolazine have been studied with ab initio multiconfiguration reference methods (CASPT2 and RASPT2) and large atomic natural orbital (ANO) basis sets. The calculations confirm the expected singlet d(δ)(2) ground states for both complexes and rule out excited states within 0.5 eV of the ground states. The lowest excited states are a pair of Mn(V) triplet states with d(δ)(1)d(π)(1) configurations 0.5-0.75 eV above the ground state. Manganese(IV)-oxo macrocycle radical states are much higher in energy, ≥1.0 eV relative to the ground state. The macrocyclic ligands in the ground states of the complexes are thus unambiguously 'innocent'. The approximate similarity of the spin state energetics of the corrole and corrolazine complexes suggests that the latter macrocycle on its own does not afford any special stabilization for the Mn(V)O center. The remarkable stability of an Mn(V)O octaarylcorrolazine thus appears to be ascribable to the steric protection afforded by the β-aryl groups.     

Mapping the d-d excited-state manifolds of transition metal beta-diiminato-imido complexes. Comparison of density functional theory and CASPT2 energetics

Trigonal-planar, middle transition metal diiminato-imido complexes do not exhibit high-spin states, as might be naively expected on the basis of their low coordination numbers. Instead, the known Fe(III), Co(III), and Ni(III) complexes exhibit S = 3/2, S = 0, and S = 1/2 ground states, respectively. Kohn-Sham DFT calculations have provided a basic molecular orbital picture of these compounds as well as a qualitative rationale for the observed spin states. Reported herein are ab initio multiconfiguration second-order perturbation theory (CASPT2) calculations, which provide a relatively detailed picture of the d-d excited-state manifolds of these complexes. Thus, for a C(2v) Fe(III)(diiminato)(NPh) model complex, two near-degenerate states ((4)B(2) and (4)B(1)) compete as contenders for the ground state. Moreover, the high-spin sextet, two additional quartets and even a low-spin doublet all occur at <0.5 eV, relative to the ground state. For the Co(III) system, although CASPT2 reproduces an S = 0 ground state, as observed experimentally for a related complex, the calculations also predict two exceedingly low-energy triplet states; there are, however, no other particularly low-energy d-d excited states. In contrast to the Fe(III) and Co(III) cases, the Ni(III) complex has a clearly nondegenerate (2)B(2) ground state. The CASPT2 energetics provide benchmarks against which we can evaluate the performance of several common DFT methods. Although none of the functionals examined perform entirely satisfactorily, the B3LYP hybrid functional provides the best overall spin-state energetics.     

Spectroscopic and computational evaluation of the structure of the high-spin Fe(IV)-oxo intermediates in taurine: alpha-ketoglutarate dioxygenase from Escherichia coli and its His99Ala ligand variant

The Fe(II)- and alpha-ketoglutarate (alphaKG)-dependent dioxygenases activate O2 for cleavage of unactivated C-H bonds in their substrates. The key intermediate that abstracts hydrogen in the reaction of taurine:alphaKG dioxygenase (TauD), a member of this enzyme family, was recently characterized. The intermediate, denoted J, was shown to contain an iron(IV)-oxo unit. Other important structural features of J, such as the number, identity, and disposition of ligands in the Fe(IV) coordination sphere, are not yet understood. To probe these important structural features, a series of models for J with the Fe(IV) ion coordinated by the expected two imidazole (from His99 and His255), two carboxylate (succinate and Asp101), and oxo ligands have been generated by density functional theory (DFT) calculations, and spectroscopic parameters (M?ssbauer isomer shift, quadrupole splitting, and asymmetry parameter, 57Fe hyperfine coupling tensor, and zero field splitting parameters, D and E/D) have been calculated for each model. The calculated parameters of distorted octahedral models for J, in which one of the carboxylates serves as a monodentate ligand and the other as a bidentate ligand, and a trigonal bipyramidal model, in which both carboxylates serve as monodentate ligands, agree well with the experimental parameters, whereas the calculated parameters of a square pyramidal model, in which the oxo ligand is in the equatorial plane, are inconsistent with the data. Similar analysis of the Fe(IV) complex generated in the variant protein with His99, the residue that contributes the imidazole ligand cis to the oxo group, replaced by alanine suggests that the deleted imidazole is replaced by a water ligand. This work lends credence to the idea that the combination of M?ssbauer spectroscopy and DFT calculations can provide detailed structural information for reactive intermediates in the catalytic cycles of iron enzymes.     

DFT survey of monoboron and diboron corroles: regio- and stereochemical preferences for a constrained, low-symmetry macrocycle

The structures of a number of mono- and diboron corrole complexes have been optimized using DFT methods in order to establish regio- and stereochemical preferences for bonding of one or two boron atoms to the corrole macrocycle. The formulations of the complexes were suggested either from preliminary experimental results (to be reported elsewhere) or by analogy with related diboron porphyrin compounds. The computational results suggest for the monoboron corroles BF(2)(H(2)corrole) and BPhH(H(2)corrole) that the regioisomer in which the boron is bound to a dipyrromethene site adjacent to the bipyrrole is preferred over the other possible regioisomers in which boron coordinates either in the bipyrrole or in the dipyrromethene site opposite the bipyrrole. In the N-substituted corrole complexes there are only two possiblities and, for each complex, the regioisomer with boron in the dipyrromethene site adjacent to the bipyrrole is lower in energy. For all four monoboron complexes the stereoisomers in which boron and both its substituents are displaced out of the mean N(4) plane are more stable than the boron in-plane stereoisomers. These regio- and stereochemical preferences are rationalised by an analysis of the deformations to the corrole macrocycle and the geometry at the boron atoms. The lowest energy structures in all cases correspond to the least strained configurations. In addition, all four complexes show significant BFHN hydrogen bonding and BHHN dihydrogen bonding interactions, which are maximised in the lowest energy configurations for each structure, indicating that these are important additional stabilising interactions. Three different regioisomers, each with cisoid or transoid stereochemistry were optimised for the diboron complex PhBOB(corrole) which contains a bridging BOB group. The dipyrromethene/dipyrromethene isomer is more stable than either of the dipyrromethene/bipyrrole isomers and cisoid stereochemistry is preferred over transoid. This contrasts with porphyrin complexes containing BOB groups for which both stereochemical possibilities are observed, and reflects the contracted size of the corrole macrocycle. Three further diboron corroles were investigated, the diboranyl cation [B(2)(corrole)](+) and its one- and two-electron reduced derivatives B(2)(corrole) and [B(2)(corrole)](-). These calculations were undertaken to determine whether the site of reduction of [B(2)(corrole)](+) is likely to be the diboron moiety or the macrocycle. The B-B bond lengths do not shorten upon reduction and an analysis of the molecular orbitals of each species indicates that reduction will be most likely to occur at the macrocycle, offering a potential route to an example of the two-electron reduced corrole ligand, an analogue of the 20-electron isophlorin ligand observed in the corresponding reduced porphyrin complex B(2)(porphine).