Multifunctional inorganic/organic hybrid microgels

This review summarizes recent research dedicated to hybrid colloids combining inorganic nanoparticles and cross-linked polymer networks. We discuss aspects of synthesis, characterization, and application of systems with different morphologies and properties. Due to the large number of works in the field of composite materials, we focus on materials with responsive polymer components, which are dispersed in aqueous media.     

Preparation and photophysics of polyimide/silica organic/inorganic hybrid composites

In this work, polyimide/silica hybrid composites were prepared by the sol-gel reaction of tetraethoxysilane(TEOS) and the thermal imidization of poly(amic acid) from 3,3′,4,4′-biphenyltetracarboxylic dianhydride(BPDA) and 4,4′-oxydianiline(ODA), and their photophysical properties were investigated using a fluorescence spectroscopy. It was found that the intrinsic fluorescence of poly(4,4′-oxydiphenylene-3,3′4,4′-biphenyltetracarboximide)(BPDA-ODA) such as emission intensity and emission wavelength depends strongly on the changes in the molecular conformations during the sol-gel reaction and the thermal imidization. In conclusion, we found that the fluorescence spectroscopy can provide an insight into how the intermolecular or intramolecular interaction of polyimide in the hybrid composite system is affected by the silica contents, depending on the sample states.     

手性有机-无机杂化氧化硅纳米管的制备

依照文献以L-苯甘氨酸为手性源合成了一个手性阴离子两亲小分子化合物.利用圆二色谱表征了该化合物水中的自组装行为.通过溶胶-凝胶复制法,以该手性两亲小分子化合物和结构助剂的组装体为模板制备了右手螺旋有机-无机杂化氧化硅纳米管.圆二色谱表征结果表明,4,4′-亚联苯基氧化硅中的联苯基团呈手性堆积.     

Fabrication and properties of thermosensitive organic/inorganic hybrid hydrogel thin films

We report on a facile method for fabricating thermosensitive organic/inorganic hybrid hydrogel thin films from a cross-linkable organic/inorganic hydrid copolymer, poly[ N-isopropylacrylamide- co-3-(trimethoxysilyl)propylmethacrylate] [P(NIPAm- co-TMSPMA)]. Fourier transform infrared (FT-IR) spectra confirmed the formation of hybrid hydrogel thin films after hydrolysis of the methoxysilyl groups (Si-O-CH 3) and subsequent condensation of the silanol groups (Si-OH). Atomic force microscopy (AFM) images revealed that the surface morphology of the hydrogel thin films depended on the supporting substrates. Microdomains were observed for the hydrogel thin films on a gold surface, which can be attributed to inhomogeneous network structures. The thermoresponsive swelling-deswelling behavior and the viscoelastic properties of the hydrogel thin films were investigated as a function of temperature (25-45 degrees C) by using a quartz crystal microbalance (QCM) operated in water. The high frequency shear modulus of the P(NIPAm- co-TMPSMA) hydrogel thin films was several hundred kilopascals.     

Superior mechanical properties of dense and porous organic/inorganic hybrid thin films

The intrinsic mechanical properties of a given material strongly depend upon its chemical nature: the organics tend to be soft, but tough, while the inorganic materials are hard but brittle and are prone to fracture. The later characteristic gets even worse for porous materials and is of major concern in the microelectronics industry as porous organosilicates (mainly inorganic) will constitute the insulating layers in future electronic devices. In this paper, we demonstrate that significantly tougher organosilicate glass thin-films prepared by sol–gel process, can be obtained by introducing carbon bridging units between silicon atoms present in the organosilicate network. A fracture energy value of 15 J/m² was measured, surprisingly higher than that for dense silicon dioxide (10 J/m²), suggesting mechanical properties that lie somewhere in between those of conventional glasses and organic polymers. We also found that the Young’s modulus follows a linear decay when porosity is introduced, a unique property when compared to traditional organosilicates. As a result, crack resistant films were obtained at high levels of porosity, opening potential applications in the fields of low-k materials for future integrated circuits, membranes, sensors, waveguides, fuel cells and micro-fluidic channels.     

Light-activated hybrid organic/inorganic antimicrobial coatings

Light-activated antimicrobial coatings were obtained by the covalently immobilizing photo-sensitizers in a hybrid organic/inorganic matrix. These coatings were deposited via sol-gel chemistry using epoxy and methyl functional silanes. The light-activated chromophores used in this study were Methylene Blue, Toluidine Blue O, and Rose Bengal. The immobilized photo-sensitizers did not leach from the coatings. The mechanically durable hybrid coatings comprising 2.5% by weight of Rose Bengal had a good adhesion to the glass surface. These coatings were tested for the photo-deactivation of Escherichia coli and Staphylococcus aureus using illumination by a commercial fluorescent lamp. Log reduction of E. coli and S. aureus were >4 when illuminated by the fluorescent lamp in 1 and 3?h, respectively. Due to its high mechanical durability and chemical resistance, such light-activated hybrid coatings are promising candidates for indoor applications in healthcare facilities.

Open image in new window

     

Coordination bonding assembly and photophysical properties of Europium organic/inorganic/polymeric hybrid materials

Ternary organic/inorganic/polymeric hybrid material PVP-Eu-(DBM-Si)₃ (DBM = dibenzoylmethane; PVP = poly(4-vinylpyridine)) have been synthesized through the coordination bonds. The precursor DBM-Si is obtained by the modification of DBM molecule with a cross-linking reagent TEPIC (3-(triethoxysilyl)-propyl isocyanate), which is used to form the inorganic Si–O–Si networks with TEOS (tetraethoxysilane) after a hydrolysis and polycondensation process. PVP, which is obtained through the polymerization reaction using 4-vinylpyridine as the monomer in the presence of BPO (benzoyl peroxide), is used to form the organic polymeric C–C chains. For comparison, the binary organic/inorganic hybrid material Eu-(DBM-Si)₃ was also synthesized simultaneously. FT-IR (Fourier-transform infrared spectra), UV (ultraviolet absorption spectra), UV-DR (ultraviolet–visible diffuse reflection absorption spectra), SEM (scanning electron micrograph), PL (photoluminescence spectroscopy) and LDT (luminescence decay time) measurements are used to investigate the physical properties of the obtained hybrid materials. The results reveal that the ternary hybrids presents more regular morphology, higher red/orange ratio, stronger luminescent intensity, higher ⁵D₀ luminescence quantum efficiency and longer lifetime than the binary one, suggesting the property of the overall hybrid system is improved with the introduction of the organic polymer PVP.     

Network structure of inorganic/organic hybrid gels

Two series of inorganic/organic hybrid gels were prepared by the sol-gel reaction of triethoxysilyl-terminated poly(tetramethylene oxide) and tetraethoxysilane. The structure of hybrid gels was observed by small-angle X-ray scattering, and the scattered profiles were analysed by assuming a priori the density correlation functions. The results suggest that the hybrid gel is composed of organic-rich, inorganic-rich and organic/inorganic mixed regions. The size and structure of respective regions were discussed in terms of the correlation lengths evaluated from the scattering profiles.     

Temperature-sensitive hybrid microgels with magnetic properties

In the present paper, we report the preparation of hybrid temperature-sensitive microgels which include magnetite nanoparticles in their structure. Polymeric microgels have been prepared by surfactant-free emulsion copolymerization of acetoacetoxyethyl methacrylate (AAEM) and N-vinylcaprolactam (VCL) in water with a water-soluble azo-initiator. The obtained microgels possess a low critical solution temperature (LCST) in water solutions, with a rapid decrease of the particle size being observed at elevated temperatures. Magnetite was deposited directly into microgels, leading to the formation of composite particles which combine both temperature-sensitive and magnetic properties. The influence of magnetite load on microgel size, morphology, swelling-deswelling behavior, and stability is discussed.     

Preparation of new hybrid organic/inorganic polymeric chiral stationary phases for ligand-exchange chromatography

Three new hybrid organic/inorganic polymeric ligand-exchange chiral stationary phases were developed by radical chain transfer reaction and surface grafting on silica gel,and successfully used for the enantioseparations of DL-amino acids and DL-hydroxyl acids.The resolutions were achieved by using water containing 2.0×10~(-4) mol/L of CuAc_2 as a mobile phase,column temperature of 40℃,flow rate of 1.0mL/min and detection at UV 254 nm.The elution order of D-isomer before L-isomer was observed for all DL-amino acids resolved except DL-Pro.     

Dye-activated hybrid organic/inorganic mesostructured titania waveguides

A room-temperature synthesis route for the fabrication of a new type of hybrid organic/inorganic mesostructured material based on titania instead of silica as the inorganic component has been developed. This approach enables facile processing of the titania/block copolymer surfactant precursor solution into optically activated, transparent, and crack-free fibers and planar waveguides with adjustable thickness. Stabilization of the structures occurs upon solvent evaporation by formation of a solid, glasslike material without heat treatment. These dye-activated, high refractive index, titania-based composites show efficient waveguiding and mirrorless lasing at low thresholds without the need of an ultralow refractive index support layer.     

Preparation and properties of starch-based colloidal microgels

Novel starch microgels were prepared by emulsion cross-linking and characterized with respect to shape, volume, and mass density. Starch microgels appear to be negatively charged ( approximately -50 mV), with a particle size varying as a function of the type of cross-linker (ca. 0.25-10 microm). Environmental scanning electron microscopy observations show a dependence of the particle swelling on the cross-linking density. Viscosimetry reveals that starch microgels behave as charged polymers, where the reduced viscosity increases with dilution (anomalous viscosity behavior) for sufficiently low kappaalpha (ca. kappaalpha <3), the ratio of the particle radius (a), and the Debye length (kappa(-1)). Analogous results are obtained for reference-charged rigid silica spheres, which approach the hard sphere limit for increasing ionic strengths. The shape of the microgels appears to play a minor role in the anomalous viscosity behavior, which is more likely dominated by electrostatic effects.     

Generation of paramagnetic hybrid inorganic/organic thin films

There is a growing interest in developing advanced materials for thin film applications in biology, electronics, photonics and engineering. We report the development of hybrid inorganic/organic thin films containing nickel, iron and cobalt paramagnetic materials. By etching the resist in oxygen plasma after processing, most of the organic component of the resist was removed. The elemental chemical composition of the films was confirmed by energy dispersive X‐ray spectroscopy. This process can potentially lead to patterning paramagnetic thin films containing paramagnetic materials by following standard photolithography protocols, obviating the need for a wet or vacuum metal deposition. Copyright © 2010 John Wiley & Sons, Ltd.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Microstructure and interface in organic/inorganic hybrid composites1

In this article, the characterization of the microstructure and interface of hybrid composites is discussed. Poly(p‐phenylene biphenyltetracarboximide) was used as a matrix polymer and tetraethoxysilane was a precursor of silica. Polyimide/silica hybrid composites were prepared by sol–gel reaction and thermal imidization. Interfacial interaction as well as microstructure in polyimide/silica hybrid composites were well characterized by atomic force microscopy topology and small‐angle X‐ray scattering measurements. In addition, fluorescence spectroscopy was successfully applied in the studies to reveal the interfacial interaction in the hybrid systems. Copyright © 2000 John Wiley & Sons, Ltd.     

Preparation and properties of a thermo-sensitive latex film

Polymer particles with hydrophobic core and hydrophilic shell were prepared via a three-step method. First, poly(butyl methacrylate-co-methyl methacrylate) (p-(BMA-MMA)) latex was prepared through emulsion polymerization. Then, a shell of poly(glycidyl methacrylate) (p-GMA) was introduced around the p-(BMA-MMA) particles by using a redox initiation system under kinetically controlled conditions. Finally, part of the epoxy groups existing in the shell were converted into quaternary ammonium salts, resulting in an ionic hydrophilic shell. The core-shell particles could be redispersed in water to form a stable emulsion. The contact angle of the core-shell latex film with water was around 16° at 25 °C, which became larger than 90° after the film was heated at 150 °C for a short period of time. This showed that the latex film was completely switched from hydrophilicity to hydrophobicity by the action of heat. Additionally, the latex film before heat treatment could be easily washed away from the substrate with neutral water, but it could no longer be removed after the heat treatment. When an IR dye with the maximum absorption at 830 nm was incorporated into the film, it became sensitive to LD laser emitting at 830 nm and gave negative image after exposed by LD laser and developed with neutral water. This showed that the latex film might find uses in chemical-free thermal laser imaging applications.     

Efficient preparation of functionalized hybrid organic/inorganic Wells-Dawson-type polyoxotungstates

Hybrid organic/inorganic Wells-Dawson polyoxotungstates have been prepared through addition of functionalized tricholorostannanes to lacunary alpha(2)- and alpha(1)-[P(2)W(17)O(61)](10-). Coupling of amines and alcohols to polyoxotungstate platforms led to new structures in good yields. Coupling of chiral amines to the previously unknown organotin-substituted alpha(1) derivatives allowed the isolation of diastereomers, which feature in some cases split (1)H, (13)C, and (31)P NMR spectra. This is the first example of NMR observation of a single pair of diastereomers in the alpha(1)-Wells-Dawson series. It opens the way to potential resolution of those chiral polyoxotungstates.     

Solvent-free synthesis of reactive inorganic precursors for preparation of organic/inorganic hybrid materials

Prehydrolyzed-condensed precursors containing amino or glycido groups were prepared via sol gel process using various alkoxysilanes in the bulk, without addition of solvent in any step of their preparation. The influence of the experimental set-up, the functionality and ratio of alkoxysilanes, and type of catalyst, on the structure buildup was studied. In the case of amino precursors, the sol–gel process was carried out at weak basic conditions while in the case of glycido precursors the sol–gel process was catalyzed by acid or neutral pH. The sol–gel process was monitored by ²⁹Si NMR in solution and the structure of the prehydrolysed-condensed precursors was characterized by small-angle X-Ray scattering. The systems with high content of tetraethoxysilane led to the fast gel formation. In weak acid medium tetraethoxysilane formed larger, more condensed species as well as small structures (based on Q ₁, Q ₂ and Q ₃ species) with silanol groups. Strong acidic conditions led to the fast formation of insoluble silica particles in liquid (sol) phase containing monomeric alkoxysilanes. The most suitable precursor formulations based on the alkoxysilanes with amino groups, as well as the most efficient set-up, were selected and used to prepare hybrid organic/inorganic networks based on an epoxy matrix. These networks were characterized using dynamic mechanical analysis.     

Protein-templated organic/inorganic hybrid materials prepared by liquid-phase deposition

Organic/inorganic hybrid thin films for protein recognition have been prepared by the liquid-phase deposition (LPD) coupled with template synthesis, i.e., molecular imprinting, where pepsin (Pep) was used as a model protein and titanium oxide was deposited on gold substrates in the presence of Pep-poly-L-lysine (PL) complexes. The complexes remained in the templated film after the deposition, and the binding sites for Pep were constructured after Pep was removed from the film. Surface plasmon resonance signals on the deposited films were measured to examine the binding behaviors toward proteins. The binding of Pep on the templated film was reversible, and the binding isotherm of Pep depicted a saturation curve with a binding constant of 7.3 x 105 M(-1), which was 10 times higher than that of albumin. In contrast, titanium oxide films prepared without PL did not show any selectivity; therefore, the hybridization of PL as the organic binder with the inorganic material is necessary to obtain selective binding sites for Pep. It was also shown that the hybridization process should proceed without denaturing the template protein, in order to obtain selective binding sites for the template. The procedure for preparation of the films was simple to perform, and the process for hybridization of the thin films with nanometer-order thickness was easily controlled by changing the LPD reaction time period. Consequently, the proposed LPD coupled with template synthesis is among the most appropriate methods to prepare hybrid materials with protein recognition ability, which proceeds under mild conditions in aqueous solution.     

Self-supported bacterial cellulose/boehmite organic–inorganic hybrid films

Self-supported organic-inorganic hybrid transparent films have been prepared from bacterial cellulose and boehmite. SEM results indicate that the BC membranes are covered by Boehmite and XRD patterns suggest structural changes on cellulose due to Boehmite addition. Thermal stability is accessed through TG curves and is dependent on Boehmite content. Transparency, as evaluated by UV?CVis absorption, increases with increasing content of boehmite suggesting application of these materials as transparent substrates for opto-electronic devices.