A one-step homogeneous immunoassay for cancer biomarker detection using gold nanoparticle probes coupled with dynamic light scattering

A one-step homogeneous immunoassay for the detection of a prostate cancer biomarker, free-PSA (prostate specific antigen), was developed using gold nanoparticle probes coupled with dynamic light scattering (DLS) measurements. A spherical gold nanoparticle with a core diameter around 37 nm and a gold nanorod with a dimension of 40 by 10 nm were first conjugated with two different primary anti-PSA antibodies and then used as optical probes for the immunoassay. In the presence of antigen f-PSA in solution, the nanoparticles and nanorods aggregate together into pairs and oligomers through the formation of a sandwich type antibody-antigen-antibody linkage. The relative ratio of nanoparticle-nanorod pairs and oligomers versus individual nanoparticles was quantitatively monitored by DLS measurement. A correlation can be established between this relative ratio and the amount of antigen in solution. The light scattering intensity of nanoparticles and nanoparticle oligomers is several orders of magnitude higher than proteins and other typical molecules, making it possible to detect nanoparticle probes in the low picomolar concentration range. f-PSA in the concentration range from 0.1 to 10 ng/mL was detected by this one-step and washing-free homogeneous immunoassay.     

Sensitive protein microarray synergistically amplified by polymer brush-enhanced immobilizations of both probe and reporter

Great challenge remains to continuously improve sensitivity of protein microarrays for broad applications. A copolymer brush is in situ synthesized on both substrate and silica nanoparticle (SNP) surface to efficiently immobilize probe and reporter protein respectively for synergistic amplification of protein microarray signals. As a demonstration, sandwich immunoassay for a cancer biomarker carcinoembryonic antigen (CEA) detection is performed on microarray platform, showing a limit of detection (LOD) of 10 pg/ml and dynamic range of 10 pg/ml to 100 ng/ml. Two orders improvement of LOD is achieved in comparison to the small crosslinker-activated substrate. The improved sensitivity is attributed to not only the high immobilization amount of both probe and reporter but also the favorite protein binding orientations offered by the flexible brushes. This work provides a universal approach to inexpensively and significantly improve protein microarray sensitivity.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

Fluorescence for the determination of protein with functionalized nano-ZnS

ZnS nanoparticles have been prepared and modified with sodium thioglycolate. The functionalized nanoparticles are water-soluble. They were used as fluorescence probes in the determination of proteins, which was proved to be a simple, rapid and specific method. In comparison with single organic fluorophores, these nanoparticle probes are brighter, more stable against photobleaching, and do not suffer from blinking. Under optimum conditions, linear relationships were found between the enhanced intensity of fluorescence at 441 nm and the concentration of protein in the range 0.1-4.0 microg mL(-1) for human serum albumin (HSA), 0.2-3.0 microg mL(-1) for bovine serum albumin (BSA) and 0.1-4.5 microg mL(-1) for gamma-globulin (gamma-G). The limits of detection were 0.015 microg mL(-1) for HSA, 0.024 microg mL(-1) and 0.017 microg mL(-1) for BSA and gamma-G, respectively. The method has been applied to the analysis of human serum samples collected from the hospital and the results were in good agreement with those reported by a hospital, indicating that the method presented here is not only sensitive and simple, but also reliable and suitable for practical application.     

Silica nanoparticles encapsulating near-infrared emissive cyanine dyes

We show that efficient near-infrared (NIR) cyanine fluorophores (1 and 2) can be encapsulated into silica nanoparticles providing a highly versatile and unique platform for in vivo diagnostics. Utilizing this platform, multiple fluorophores can be loaded within a single particle allowing the light absorption and emission properties of the nanoparticle to be controlled independent of particle size. Furthermore, such dyed nanoparticles may have extinction coefficients as high as about 100 x 10(6) Lmol(-1)cm(-1) in the NIR (on a per mole of particles basis), with quantum yields from about 8-10%. A simple synthetic method for varying particle size and dye-loading level is presented, and a modified Stober synthesis reduces deleterious exposure of the dye to the highly alkaline conditions used. The cyanine dyes are encapsulated in silica in a non-aggregated state and the fluorescence brightness is largely maintained to nominal dye concentrations approaching 50 muM. The ability to control light absorption and emission properties independent of particle size, and convenient access to particle sizes in the range of 20-100 nm (a size regime difficult to access with other nanoparticle approaches such as quantum dots), are important features for anatomical targeting in in vivo diagnostics and targeted therapeutic applications.     

Optimization of dye-doped silica nanoparticles prepared using a reverse microemulsion method

Fluorescent labeling based on silica nanoparticles facilitates unique applications in bioanalysis and bioseparation. Dye-doped silica nanoparticles have significant advantages over single-dye labeling in signal amplification, photostability and surface modification for various biological applications. We have studied the formation of tris(2,2'-bipyridyl)dichlororuthenium(II) (Ru(bpy)) dye-doped silica nanoparticles by ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) in water-in-oil microemulsion. The fluorescence spectra, particle size, and size distribution of Ru(bpy) dye-doped silica nanoparticles were examined as a function of reactant concentrations (TEOS and ammonium hydroxide), nature of surfactant molecules, and molar ratios of water to surfactant (R) and cosurfactant to surfactant (p). The particle size and fluorescence spectra were dependent upon the type of microemulsion system chosen. The particle size was found to decrease with an increase in concentration of ammonium hydroxide and increase in water to surfactant molar ratio (R) and cosurfactant to surfactant molar ratio (p). This optimization study of the preparation of dye-doped silica nanoparticles provides a fundamental knowledge of the synthesis and optical properties of Ru(bpy) dye-doped silica nanoparticles. With this information, these nanoparticles can be easily manipulated, with regard to particle size and size distribution, and bioconjugated as needed for bioanalysis and bioseparation applications.     

A simple double-bead sandwich assay for protein detection in serum using UV-vis spectroscopy

In this study a double-bead sandwich assay, employing magnetic nanoparticles and gold nanoparticles is proposed. The magnetic nanoparticles allow specific capturing of the analyte in biological samples, while the optical properties of the gold nanoparticles provide the signal transduction. We demonstrated that a major improvement in the assay sensitivity was obtained by selecting an optimal gold nanoparticle size (60 nm). A detection limit of 5-8 ng/mL, a sensitivity of 0.6-0.8 (pg/mL)⁻¹ and a dynamic range of 3 orders of magnitude were achieved without any further amplification using the detection of prostate specific antigen in serum as a model system. The proposed assay has the ability to be easily implemented within a microfluidic device for point-of-care applications whereby the readout can be executed by a fast and cheap optical measurement.     

Gold nanoparticles catalyzed chemiluminescence immunoassay for detection of herbicide 2,4-dichlorophenoxyacetic acid

We present a novel immunoassay format utilizing the catalytic properties of gold nanoparticles in the luminol-silver nitrate-gold nanoparticle based chemiluminescence (CL) system for the detection of widely used herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Highly sensitive anti-2,4-D antibody was produced and conjugated with gold nanoparticles of various sizes. In the present assay format, employing a competitive inhibition approach, a well-characterized hapten-protein conjugate (2,4-D-BSA) was used to coat the microtiter plates. The analyte (2,4-D) was pre-incubated with anti-2,4-D antibody labeled with gold nanoparticles and added to each well of the microtiter plate. The gold label triggered the reaction between luminol and silver nitrate generating a luminescence signal at 425 nm. Under the optimized conditions, the CL based immunoassay showed the detection limit of 2,4-D in standard water samples around 3 ng mL(-1). The CL based immunoassay format, based on gold nanoparticles as a catalyst, could be used as a fast screening methodology (<30 min) for pesticide detection.     

Hydrothermal growth of mesoporous SBA-15 silica in the presence of PVP-stabilized Pt nanoparticles: synthesis, characterization, and catalytic properties

A novel high surface area heterogeneous catalyst based on solution phase colloidal nanoparticle chemistry has been developed. Monodisperse platinum nanoparticles of 1.7-7.1 nm have been synthesized by alcohol reduction methods and incorporated into mesoporous SBA-15 silica during hydrothermal synthesis. Characterization of the Pt/SBA-15 catalysts suggests that Pt particles are located within the surfactant micelles during silica formation leading to their dispersion throughout the silica structure. After removal of the templating polymer from the nanoparticle surface, Pt particle sizes were determined from monolayer gas adsorption measurements. Infrared studies of CO adsorption revealed that CO exclusively adsorbs to atop sites and red-shifts as the particle size decreases suggesting surface roughness increases with decreasing particle size. Ethylene hydrogenation rates were invariant with particle size and consistent with a clean Pt surface. Ethane hydrogenolysis displayed significant structure sensitivity over the size range of 1-7 nm, while the apparent activation energy increased linearly up to a Pt particle size of approximately 4 nm and then remained constant. The observed rate dependence with particle size is attributed to a higher reactivity of coordinatively unsaturated surface atoms in small particles compared to low-index surface atoms prevalent in large particles. The most reactive of these unsaturated surface atoms are responsible for ethane decomposition to surface carbon. The ability to design catalytic structures with tunable properties by rational synthetic methods is a major advance in the field of catalyst synthesis and for the development of accurate structure-function relationships in heterogeneous reaction kinetics.     

基于BHHCT-Eu3+@SiO2荧光稀土二氧化硅纳米颗粒的免疫层析试纸条检测卡那霉素

采用微波辅助合成的荧光稀土二氧化硅纳米颗粒(BHHCT-Eu3+@SiO2)为标记物,建立了快速定量检测卡那霉素(Kana)残留的荧光免疫层析方法.实验结果表明,微波辅助合成的BHHCT-Eu3+@SiO2纳米颗粒呈球形,粒径约36 nm,具有良好的荧光发射性能,最大吸收波长和最大发射波长分别为343和615 nm.将BHHCT-Eu3+@SiO2与卡那霉素抗体(Kana-ab)通过醛基化葡聚糖交联,合成了荧光标记抗体Eu3+-Kana-ab,结合定量侧向层析读数仪,建立了牛奶中Kana残留的快速定量检测方法,对Kana的检出限(IC10)为0.85 ng/mL,半数抑制浓度(IC50)为12.76 ng/mL,检测范围(IC20-IC80)为3.0~76.0 ng/mL,牛奶中的Kana的加标回收率范围为93.7%~97.4%,RSD为3.1%~4.6%,与Kana类似物的交叉反应均<1%.牛奶中Kana残留的测定结果与ELISA方法相关性良好.     

Multianalysis of Thyroid Tumor Markers on the Surface of a Porous Membrane and Semiconductor Substrates using Gold Nanoparticles as a Label

We present a method for the simultaneous detection of thyroglobulin and thyroid-stimulating hormone on microchips using gold nanoparticles for antibody labeling. Nitrocellulose and silicon were used as supports for the microchips. The detection principle was based on a sandwich immunoassay using a pair of antibodies that simultaneously bind to the analyte. Specific monoclonal antibodies that are most sensitive and specific in detecting the hormones and signal-to-background ratio are selected. The analytical signal was the intensity of the staining of the microchip zones on the membrane and the nanoparticle density on the silicon substrate. The detection limit for thyroglobulin and thyroid-stimulating hormone was 0.25 ng/mL and 0.016 μIU/mL for the membrane support and 0.1 ng/mL and 0.013 μIU/mL for silicon substrate, respectively. The method can be further used to develop nanoscale sensor devices for the express diagnostics of thyroid pathologies.     

Construction of Three Single‐Chain Antibody Fragment Variable Fusion Structures for Sensitive Detection of Nucleocapsid Protein of Hantaan Virus

Abstract

Three single‐chain fragment variable (scFv) fusion structures were constructed for use in rapid and sensitive detection of nucleocapsid protein (NP) of Hantaan virus. The detection of NPs on glass chips was signalized by enzyme labeling or fluorescence dye Cy3, or Cy5 cluster nanoparticles. The sensitivity of the methods with different signal systems was evaluated and compared. The detection limits of scFv‐alkaline phosphatase fusion, fluorescence labeling (scFv‐Cy3), and nanoparticles labeling (scFv‐SBP‐streptavidin‐nanoparticle) were 0.1 µg/mL, 1 ng/mL, and 0.1 ng/mL NP, respectively, which were all lower than that in a conventional enzyme‐linked immunosorbent assay (ELISA) (1 µg/mL). Twenty Hantaan virus isolates were detected using the proposed methods.     

Synthesis and characterization of pore size-tunable magnetic mesoporous silica nanoparticles

Magnetic mesoporous silica nanoparticles (M-MSNs) are emerging as one of the most appealing candidates for theranostic carriers. Herein, a simple synthesis method of M-MSNs with a single Fe(3)O(4) nanocrystal core and a mesoporous shell with radially aligned pores was elaborated using tetraethyl orthosilicate (TEOS) as silica source, cationic surfactant CTAB as template, and 1,3,5-triisopropylbenzene (TMB)/decane as pore swelling agents. Due to the special localization of TMB during the synthesis process, the pore size was increased with added TMB amount within a limited range, while further employment of TMB lead to severe particle coalescence and not well-developed pore structure. On the other hand, when a proper amount of decane was jointly incorporated with limited amounts of TMB, effective pore expansion of M-MSNs similar to that of analogous mesoporous silica nanoparticles was realized. The resultant M-MSN materials possessed smaller particle size (about 40-70 nm in diameter), tunable pore sizes (3.8-6.1 nm), high surface areas (700-1100 m(2)/g), and large pore volumes (0.44-1.54 cm(3)/g). We also demonstrate their high potential in conventional DNA loading. Maximum loading capacity of salmon sperm DNA (375 mg/g) was obtained by the use of the M-MSN sample with the largest pore size of 6.1 nm.     

A novel method for the preparation of silver chloride nanoparticles starting from their solid powder using microemulsions

A novel method of preparing AgCl nanoparticles by mixing AgCl powder and a microemulsion consisting of dioctyldimethylammonium chloride/n-decanol/water/isooctane is introduced. This new method was discovered during the preparation of AgCl nanoparticles in single microemulsions by direct reaction with the dioctyldimethylammonium chloride surfactant counterion. The effect of the following variables on the concentration of the colloidal AgCl nanoparticles (the nanoparticle uptake) and the particle size were studied: (1) operating variables, including mixing and temperature; and (2) microemulsion variables, including surfactant and cosurfactant concentration, and water to surfactant mole ratio. Manipulating these variables provides an insight into the role of the surfactant surface layer rigidity on the phenomenon. The results were explained by the effect of these variables on reaction rates and the colloidal nanoparticle stability. Mixing had a significant effect on the nanoparticle uptake. At 300 rpm an equilibrium AgCl nanoparticle uptake was achieved in about 1 h, while without mixing only 5% of the equilibrium value was reached even after 24 h. An optimum temperature was found for which a maximum nanoparticle uptake was obtained. At higher temperatures, the nanoparticle uptake declined. The nanoparticle uptake increased linearly with the surfactant concentration, and the particle size increased as well. A monotonic decrease in the nanoparticle uptake accompanied by an increase in the particle size was observed when increasing n-decanol concentration or the water to surfactant mole ratio.     

Controlled synthesis of fluorescent silica nanoparticles inside microfluidic droplets

We study the droplet-based synthesis of fluorescent silica nanoparticles (50-350 nm size) in a microfluidic chip. Fluorescein-isothiocyanate (FITC) dye is first chemically linked to aminopropyl triethoxysilane (APTES) in ethanol and this reaction product is subsequently mixed with tetraethyl orthosilicate (TEOS) to yield a fluorescent silicon alkoxide precursor solution. The latter reacts with an aqueous ethanol-ammonia hydrolysing mixture inside droplets, forming fluorescent silica nanoparticles. The droplets are obtained by pinching-off side-by-side flowing streams of alkoxide solution/hydrolysing mixture on a microfluidic chip using a Fluorinert oil continuous phase flow. Synthesis in droplets leads to a faster reaction and allows drastically improved nanoparticle size uniformity (down to 3% relative standard deviation for 350 nm size particles) when compared to conventional bulk synthesis methods, thanks to the precise control of reagent concentrations and reaction times offered by the microfluidic format. Incorporating FITC inside silica nanoparticles using our method leads to reduced dye leakage and increases the dye's stability, as evidenced by a reduced photochemical bleaching compared to a pure FITC solution.     

Novel fluorescent silica nanoparticle probe for ultrasensitive immunoassays

The preparation and utilization of a novel particulate label based on fluorescent hybrid silica (FHS) nanoparticles are reported in this article. These nanoparticles have shown several unique advantages over existing dye molecules, quantum dots, and latex-based fluorescent particles in easy preparation, good photostability and high sensitivity. A high molar ratio of the fluorescent molecules present in the core to biomolecules on the particle surface was achieved by using the well-developed silica surface immobilization chemistry for biomolecular linking. A fluoroimmunoassay method for detecting trace level Hepatitis B Surface Antigen (HBsAg) was developed. The calibration graph for HBsAg was linear over the range 0.5-220 ng/ml with a detection limit of 0.1 ng/ml. The sensitivity is greatly increased when compared with the corresponding immunoassay performed with direct fluorophore labeling. The present work shows that these FHS nanoparticles are high-quality markers for biochemical assays.     

A study of using luminophore-doped silica nanoparticles as fluorescent probe in protein microarray assay

A convenient method for the synthesis of tris(2,2′-bipyridyl) dichlororuthenium(II) hexahydrate-doped amino-modified double-layer silica nanoparticles is presented in this paper. The synthesized nanoparticles are uniform and photostable, and can be well dispersed in a water solution. Proteins could be directly immobilized onto these nanoparticles by a simple coupling process without losing their biological activities. These nanoparticles were further used as fluorescent probes in protein microarray assay for the quantitative detection of protein. The results obtained by these nanoparticles, with the detection limit of as low as 3.5 μg/mL, were much better than those involving the use of conventional FITC probe. Translated from Chinese Journal of Analytical Chemistry, 2006, 34(9): 1227–1230 (in Chinese)     

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Inkjet-printed gold nanoparticle electrochemical arrays on plastic. Application to immunodetection of a cancer biomarker protein

Electrochemical detection combined with nanostructured sensor surfaces offers potentially low-cost, high-throughput solutions for detection of clinically significant proteins. Inkjet printing offers an inexpensive non-contact fabrication method for microelectronics that is easily adapted for incorporating into protein immunosensor devices. Herein we report the first direct fabrication of inkjet-printed gold nanoparticle arrays, and apply them to electrochemical detection of the cancer biomarker interleukin-6 (IL-6) in serum. The gold nanoparticle ink was printed on a flexible, heat resistant polyimide Kapton substrate and subsequently sintered to create eight-electrode arrays costing <0.2 euro per array. The inkjet-printed working electrodes had reproducible surface areas with RSD <3%. Capture antibodies for IL-6 were linked onto the eight-electrode array, and used in sandwich immunoassays. A biotinylated secondary antibody with 16-18 horseradish peroxidase labels was used, and detection was achieved by hydroquinone-mediated amperometry. The arrays provided a clinically relevant detection limit of 20 pg mL(-1) in calf serum, sensitivity of 11.4 nA pg(-1) cm(-2), and a linear dynamic range of 20-400 pg mL(-1).