半芳香尼龙6T/66的合成和非等温结晶动力学的研究

采用成盐、预聚合、固相聚合三步法制备高分子量的PA6T/66,用差示扫描量热法(DSC)研究了PA6T/66的非等温结晶动力学,结果表明:结晶温度随着降温速率的增大而降低;半结晶期T1/2随降温速率Ф的增大呈指数下降,表明结晶速率随降温速率的增大而提高;由用R-T法可以得到在不同结晶度下lgΦ对lgT有较好的线性关系。用Kissinger方法计算得到PA6T/66(55/45)非等温结晶活化能分别为ΔE=-61.51kJ/mol。     

耐高温杂化阻燃剂/改性红磷阻燃半芳香尼龙的研究

将自制的耐高温勃姆石@苯基次膦酸铝杂化阻燃剂(BM@Al-PPi)与市售改性红磷(MRP)复配制得一种可用于半芳香尼龙PA6T/DT(HTN)的耐高温高效阻燃体系.保持阻燃剂15 wt%的总添加量不变时,MRP的添加量仅为5 wt%即可赋予HTN垂直燃烧V-0级别,极限氧指数为29.8%.锥形量热测试及其燃烧残余物研究表明,MRP阻燃HTN材料以气相阻燃作用为主,抑制热释放效果不佳且烟释放明显增加;而BM@Al-PPi的凝聚相交联成炭作用可同时抑制热释放与烟释放.结合裂解气相色谱质谱联用(Py-GC-MS)分析,给出了HTN/BM@Al-PPi/MRP体系的阻燃机理.BM@Al-PPi与MRP结合使得残炭质量显著提高,同时兼具气相作用,达到了较好的阻燃效果.     

高温尼龙PA10T改性研究最新进展

聚对苯二甲酰癸二胺(PA10T)是我国自主开发的一种新型生物基耐高温尼龙,具有优异的力学性能、耐热性、耐磨性、尺寸稳定性、耐化学腐蚀性、抗水解性和良好的加工性能,且吸水率低,应用前景广阔,是近几年发展较快的一种特种工程塑料.对PA10T的改性研究一直是学术界和产业界关注的重点,本文综述了2015-2020年间国内外关于...     

液晶性芳香酰胺化合物的合成

合成了一系列炖粹以酰胺基为中心桥键的刚性芳香酰胺小分子化合物，并对其作了表征，发现其中有些化合物具有液晶性。酰胺键之间能形成很强的分子间氢键，使芳香酰胺小分子化合物的熔点很高，难于形成液成液晶态。研究发现，如果在这类化合物的中心苯环上引入合适的取代基以减弱分子间氢键，同时引入合适的末端基时，则可使芳香酰胺化合物生成液晶相的能力增强。     

几种芳香型三环二萜化合物的半合成

芳香型三环二萜;半合成;(±)-甲氧基罗汉松烷三烯     

PA6T的非等温结晶动力学

采用示差扫描量热仪(DSC)考察了PA6T的非等温熔融结晶过程,分别采用Avrami方程、Ozawa方程及Mo提出的新方程对PA6T的非等温动力学数据进行比较分析,计算了相关非等温结晶动力学参数和非等温结晶活化能。结果表明:对于PA6T,用Mo法处理得到的结果更理想。     

新型长链芳香酰胺聚合物的合成

3,5-二胺基苯甲酰胺与4,6-二烷氧基-1,3-苯二甲酰氯经缩合反应合成了两个新型的长链芳香酰胺聚合物,其结构经1H NMR,IR和GPC表征。     

芳香偶氮化合物的合成研究进展

综述了芳香偶氮化合物的主要合成方法,包括重氮偶联反应、米尔斯反应、胺的氧化、芳肼的的氧化、硝基化合物的还原偶联反应、重氮盐的二聚反应、叠氮化合物的热解等,并对各方法的优缺点进行了简要评述。     

具有苯烷基侧链的芳香液晶聚酯的合成及性质

以熔融缩聚方法全盛了具有苯烷基侧链取代的全芳香液晶聚酯，用TG，DSC，热台偏光显微镜研究了聚酯的热性能，并讨论了取代基对聚酯热性能的影响，所有合成的聚酯均为热致型液晶，且具有较低的相转变温度。特别是当聚对苯二甲酸对苯二酚酯的两个苯环上分别取代了叔丁基和苯烷基，或取代了两个苯烷基侧链后，聚酯的熔融温度下降到225℃以下，并可在室温下溶于普通的有机溶剂中。     

芳香偶氮衍生物合成策略研究的新进展

芳香偶氮化合物具有独特的光致顺反异构特性,不仅应广泛用于传统化学工业,还将应用于光化学分子开关、主客体超分子化学识别、自组装液晶材料、生物医学成像与化学分析以及光驱分子马达等诸多新兴科学领域.特别具挑战性的是开发具有高化学稳定性和热稳定性又易检测的偶氮发色团,近年来受到科研工作者们的高度关注.随着人们对研究新型芳香偶氮衍生物的迫切需要,又相继创新和发展了一些更新、更有效的芳香偶氮化合物合成方法,综述了最近新型芳香偶氮衍生物合成方法的新进展,尤其强调了芳基肼的氧化脱氢反应和金属催化偶联反应、芳胺的氧化反应、硝基芳香化合物的还原偶联反应、芳香偶氮氧化物的转化与还原、叠氮芳香化合物的催化偶联与热分解反应以及芳香基重氮盐的偶合与催化偶联反应等在芳香偶氮化合物合成方面应用的新趋势.     

Synthesis and Characterization of Star-Branched Nylon 12

Linear and star-branched polyamide 12 were prepared in the presence of mono- and multifunctional acid agents. Molecular masses and molecular mass distributions are discussed according to our model recently presented and are compared with the data obtained by Flory's model. End group titration and SEC data are discussed. Oligomerisation data confirm the general validity of our model.     

Facile Synthesis of Processable Semi-aromatic Polyamide Containing Thioether Units

A series of processable semi-aromatic polyamides containing thioether units have been developed. They were synthesized through the reaction of 4,4’-bis(4-chloroformylphenylthio)benzene (BPB-DC) and aliphatic diamine by the method of interfacial polycondensation. These polyamides had excellent thermal properties with glass transition temperatures (T_g) of 124–137.9°C, melting temperatures (T_m) of 306.4–324.1°C and initial degradation temperatures (T_d) of 409.5–437°C. They had wider processing windows than traditional semi-aromatic polyamides and can be processed by the melting method. They had better tensile strengths of 61.2–73.7 MPa, low-temperature mechanical properties, low water absorption of 0.17%–0.23%, low dielectric constants of 3.47–3.66 at 100 kHz and better melt flowability properties of 37.3 to 164.4 Pa. s, 48.2 to 281.7 Pa. s and 58.3 to 486.7 Pa. s at different shear rates, respectively. Additionally, these polyamides showed good corrosion resistance, they did not dissolve in solvents such as NMP, DMSO, hydrochloric acid (6 mol/L), H₃PO₄ and solution of NaOH (1 mol/L) etc.     

Preparation and properties of star-branched PA12 with hexafunctional cyclotriphosphazene core

Using hexa(4-carboxylphenoxy)cyclotriphosphazene (HCPCP) with six carboxyl groups as the core, a new kind of star-branched PA12 with hexafunctional cyclotriphosphazene core was prepared in the ring-opening polymerization of ω-laurolactam. The relationship between the structure and properties of star-branched PA12 had been systematically investigated. Compared with linear PA12, star-branched PA12 has lower relative viscosity and higher melt flow rate while its mechanical properties can be almost retained by the use of star-branching and an appropriate molecular weight. Research on crystallization and rheological behaviors indicate that star-branched PA12 with appropriate molecular weight has the faster crystallization rate, the higher flowability and the lower processing temperature and pressure than linear PA12, which could be used as the easy processing polyamide resin for the rapid molding process.     

The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering

This study investigates the processing of blends of polyamide 6 (PA6) and polyamide 12 (PA12) by selective laser sintering (SLS) using a CO₂ laser. Powder properties of undiluted polymers, mixture composition, and processing parameters, as well as their influence on the microstructure of the specimens manufactured, were evaluated. Polyamides showed higher absorption of laser energy during the sintering of blend specimens, with subsequent thermal energy transfer to the melting of the polymeric phases. The structure of parts obtained by SLS is dependent on the process parameters and the characteristics of the powder material to be processed. The microstructures of PA6/PA12 blend specimens were heterogeneous, with co-continuous and disperse phases depending on the quantity of PA12. The porosity and crystallinity also changed as a function of the component proportions. The use of polymeric blends can increase the range of structures and properties of SLS parts.     

激光烧结制备尼龙12/累托石纳米复合材料

将有机累托石与尼龙12粉末混合,采用激光烧结(SLS)技术制备了尼龙12累托石纳米复合材料,这是一种使纳米复合材料的制备与材料的成型同时进行的方法.利用X射线衍射(XRD)、红外光谱(FTIR)、扫描电镜(SEM)等手段对复合材料的结构进行了表征,并对其力学性能及热性能进行了研究.结果表明,尼龙12分子在激光烧结过程中插入到累托石层间,形成的复合材料在拉伸强度、弯曲强度、冲击强度等力学性能及热稳定性能方面均优于尼龙12烧结试样.     

PA13N的合成和非等温结晶动力学研究

采用DSC方法研究了PA13N在不同降温速率下的结晶过程,并利用Avrami方程研究了其非等温结晶动力学。在非等温结晶过程中,随着降温速率的增大,结晶温度向低温偏移。综合利用Avrami方程得到Avrami指数为1.35~1.88和结晶速率常数Zc≈1;并求得其结晶活化能为-58.42kJ/mol。结果表明,PA13N的结晶能力小于其他脂肪族尼龙。     

EFFECT OF T-ZnOw DIMENSION ON PROPERTIES OF T-ZnOw/PA6 COMPOSITES

As a part of serial work about the application of a tetra-needle-shaped whisker(T-ZnOw) with a spatial structure in polymer composites,this work is focused on the effect of T-ZnOw dimension on the properties of polymer composites. Two kinds of T-ZnOw whiskers with different dimensions(big and small one) are introduced into PA6 composites.Our results show that for the big whisker and the small whisker both,the addition of T-ZnOw induces the mechanical property improvement of T-ZnOw/PA6 composites.Especial...