Destruction of the short‐range disorder due to erbium doping in Pb0.8La0.2TiO3films

We show the destruction of a displacement of Ti in the short‐range structure by observing the disappearance of emission and Raman signals when the Er³⁺ concentration exceeds 7 mol% in sol–gel‐derived Pb_0.8La_0.2TiO₃ polycrystalline films. It is believed that there always exists disorder due to displacement of B ions in the skeleton of BO₆ in perovskite ABO₃ materials. This disorder due to the displacement of Ti ions breaks the center of symmetry to activate emission of rare‐earth ions such as Er³⁺ and Raman modes of perovskites. We found that the breaking of symmetry can be diminished by introducing more Er³⁺ ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Photoluminescence in Gd2O3: Er3+, Yb3+ upconversion inverse opal

Photoluminescence properties of Gd₂O₃: Er³⁺, Yb³⁺ upconversion inverse opal photonic crystals were investigated. The photoluminescence spectra of the inverse opal show strong dependence on upconversion emission intensity and the corresponding photonic band-gaps of the inverse opal. Significant suppression of the green or red upconversion emission was observed if the photonic band-gap overlaps with the Er³⁺ ions emission band. The color purity of the red or green emission was improved in the inverse opal by the suppression of green or red UC emission. We believe that the present work will be valuable for not only the foundational study of upconversion emission modification but also new optical devices in upconversion lighting and display.     

Role of Bi ions for Er ions efficient 1.54 μm light emission in Er/Bi codoped SiO2 thin film prepared by sol-gel method

Er/Bi codoped SiO₂ thin films were prepared by sol-gel method and spin-on technology with subsequent annealing process. The bismuth silicate crystal phase appeared at low annealing temperature while vanished as annealing temperature exceeded 1000 °C, characterized by X-ray diffraction, and Rutherford backscattering measurements well explained the structure change of the films, which was due to the decrease of bismuth concentration. Fine structures of the Er³⁺-related 1.54 μm light emission (line width less than 7 nm) at room temperature was observed by photoluminescence (PL) measurement. The PL intensity at 1.54 μm reached maximum at 800 °C and decreased dramatically at 1000 °C. The PL dependent annealing temperature was studied and suggested a clear link with bismuth silicate phase. Excitation spectrum measurements further reveal the role of Bi³⁺ ions for Er³⁺ ions near infrared light emission. Through sol-gel method and thermal treatment, Bi³⁺ ions can provide a perfect environment for Er³⁺ ion light emission by forming Er-Bi-Si-O complex. Furthermore, energy transfer from Bi³⁺ ions to Er³⁺ ions is evidenced and found to be a more efficient way for Er³⁺ ions near infrared emission. This makes the Bi³⁺ ions doped material a promising application for future erbium-doped waveguide amplifier and infrared LED.     

Vaaisible upconversion emission of Er3+-doped and Er3+/Yb3+-codoped LiInO2

Lithium-indium oxide is a high-density (5.9 g·cm⁻³), wide band-gap semiconductor with promising applications for scintillating detection of solar neutrinos as well as for efficient phosphorescence when doped with Er³⁺ or Sm³⁺ ions. In this report, we demonstrate visible upconversion emission of Er³⁺-doped LiInO₂ synthesized by a simple solid-state chemistry procedure and discuss mechanisms responsible for pumping the Er³⁺ ions to upper levels. Intense upconversion emission is observed in the green and red spectral regions under near-infrared excitation, and it is greatly enhanced by co-doping with Yb³⁺ ions. We also examined the upconversion intensity change as a function of temperature, and, consequently, possible applications of this material as a low-temperature sensor.     

Localized desvitrifiation in Er<Superscript>3+</Superscript>-doped strontium barium niobate glass by laser irradiation

Localized desvitrifiation in strontium barium niobate glass doped with Er³⁺ under laser irradiation has been carried out. The samples of this study have been fabricated by the melt quenching method and doped with 5% mol of Er³⁺. A 1.5-W cw Ar laser was focused on the sample to obtain desvitrifiation of the glass. Evidence of the changes induced by the Ar laser has been observed through the analysis of the photoluminescence of the Er³⁺ ions. The transitions corresponding to ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 have been studied to analyze structure changes. Microluminescence measurements have been carried out to spatially select positions inside and outside the irradiated area. We have observed changes in the emission bands corresponding to these transitions. The emission bands from Er³⁺ ions in the irradiated zone show a resolved structure while they are broadened outside that area. These changes in the optical properties of the Er³⁺ ions indicate that the Ar-laser irradiation has produced a change in the local structure of the material. These results show that a localized desvitrifiation has been produced after the laser action and the transition from glass to glass ceramic has been completed.     

混合形成体对掺铒碲酸盐玻璃的热力学稳定性和发光性能的影响

研究了混合形成体效应对掺铒碲酸盐玻璃热力学稳定性、1.53 μm发光特性和上转换发光强度的影响.通过拉曼光谱测试,分析了WO₃,Nb₂O₅,GeO₂等氧化物对Er³⁺离子配位场结构,以及对发光谱的非均匀展宽机理的作用.结果表明,通过掺杂适当声子能量的网络形成体氧化物,不但可获得热力学稳定性较好的玻璃,还可有效降低Er³⁺离子⁴I_11/2能级的寿命,在抑制Er³⁺离子在可见光波段的上转换发光的同时不致劣化其在1.53 μm的发光特性.本文制得的碲酸盐玻璃具有较大的受激发射截面((9.64—10.96)×10^-21cm²)和荧光半高宽(FWHM)(50—67 nm),热力学稳定性良好,是一种理想的掺Er³⁺宽带有源光纤用基质玻璃. 关键词： 掺铒碲酸盐玻璃 混合形成体 1.53 μm发光 声子能量     

铒镱共掺光波导激光器的稳态特性

从光波导激光器的工作理论出发,研究了铒镱共掺磷酸盐波导激光器的稳态特性。利用重叠因子简化了980 nm光抽运的铒镱共掺波导激光器四能级模型的速率-传输方程;在忽略自发辐射的情况下,利用数值模拟的方法,得到了铒镱共掺波导激光器的输出与Er³⁺/Yb³⁺离子浓度、泵浦功率、波导长度等参量之间的关系曲线。理论分析结果表明,选择合适的铒镱离子浓度是制作铒镱共掺波导激光器的关键。采用980 nm波长的泵浦光,泵浦功率为80 mW,Er³⁺浓度取20×10²⁶/m³左右,Yb³⁺/Er³⁺浓度比为7~10,波导长度为20 cm左右时,可以得到最大输出光功率。     

NIR to visible frequency upconversion in Er3+ and Yb3+ codoped ZrO2 phosphor

The ZrO₂:Er³⁺ codoped with Yb³⁺ phosphor powders have been prepared by the urea combustion route. Formation of the compounds ZrO₂:Er³⁺ and ZrO₂:Er³⁺, Yb³⁺ was confirmed by XRD. The frequency upconversion emissions in the green and red regions upon excitation with a CW diode laser at ～978 nm are reported. Codoping with Yb³⁺ enhances the emission intensities of the triply ionized erbium in the green and red spectral regions by about ～130 and ～820 times respectively. The emission properties of the ZrO₂:Er³⁺ phosphor powders are discussed on the basis of excited state absorption, energy transfer, and cross-relaxation energy transfer mechanisms.     

Ultraviolet excitation of rare-earth-doped YSZ crystals

Abstract

The optical properties of nominally pure and Er³⁺- or Pr³⁺ -doped yttria-stabilized zirconia single crystals were investigated under UV light excitation. In the excitation spectra of both types of doped crystals, a broad UV band is observed. Under excitation with light of different wavelengths inside this band, the luminescence features of the doped crystals are different. YSZ: Pr³⁺ samples exhibit the characteristic 4f → 4f emission of the Pr³⁺ ions. In YSZ: Er³⁺ crystals, both the Er³⁺ ion and the intrinsic luminescence are observed. Host to Er³⁺ ion radiative energy-transfer is also demonstrated. No dependence of the transfer process with the excitation wavelength was found. These results suggest that the UV band in Er³⁺ -doped crystals is associated with the lattice-dopant ion interaction rather than with the 4f5d interconfigurational band of the Er^3? ions.     

Er3+离子掺杂钡镓锗玻璃上转换发光机理研究

研究了Er³⁺离子掺杂钡镓锗玻璃的吸收光谱、拉曼光谱和上转换光谱.分析了Er³⁺离子在钡镓锗玻璃中的上转换发光机理.结果表明：玻璃的最大声子能量为828cm^-1，紫外截止波长为275nm.采用800nm和980nmLD激发玻璃样品，在室温下观察到强烈的上转换绿光和红光发射.随着Er³⁺离子浓度的增加，绿光发光强度先增加后减小，而红光发光强度呈单调递增趋势.能量分析表明：800nmLD激发产生的绿光主要源于Er³⁺离子4I_13/2能级的激发态吸收过程；红光发射主要源于Er³⁺离子4I_13/2能级与4I_11/2能级之间的能量转移过程.980nmLD激发产生的绿光主要源于Er³⁺离子4I_11/2能级之间的能量转移过程；而红光发射主要源于Er³⁺离子4I_13/2能级与4I_11/2能级之间的能量转移过程和4I_13/2能级的激发态吸收过程.通过量子效率分析，发现采用800nmLD激发Er³⁺离子掺杂浓度为1mol% 的样品时，上转换绿光发光效率最高. 关键词： 上转换发光机理 3+离子掺杂')" href="#">Er³⁺离子掺杂 钡镓锗玻璃     

Intense 2.7 µm emission and structural origin in Er³⁺-doped bismuthate (Bi₂O₃-GeO₂-Ga₂O₃-Na₂O) glass

The 2.7 μm emission properties in Er³⁺-doped bismuthate (Bi₂O₃-GeO₂-Ga₂O₃-Na₂O) glass were investigated in the present Letter. An intense 2.7 μm emission in Er³⁺-doped bismuthate glass was observed. It is found that Er³⁺-doped bismuthate glass possesses high spontaneous transition probability A (65.26 s^-1) and large 2.7 μm emission cross section σ_em (9.53×10^-21?cm²) corresponding to the stimulated emission of Er³⁺:⁴I_11/2→⁴I_13/2 transition. The emission characteristic and energy transfer process upon excitation of a conventional 980 nm laser diode in bismuthate glass were analyzed. Additionally, the structure of bismuthate glass was analyzed by the Raman spectrum. The advantageous spectroscopic characteristics of Er³⁺ single-doped bismuthate glass together with the prominent thermal property indicate that bismuthate glass might become an attractive host for developing solid-state lasers around 2.7 μm.     

Yb3+sensitized Er3+-doped waveguide amplifiers: a theoretical approach

Silicate and phosphate glass waveguide amplifiers doped with Er³⁺, and co-doped with Er³⁺/Yb³⁺ are theoretically studied. Configurations for core and core–cladding doped waveguide amplifiers are considered. It is shown that gain in the core–cladding doped amplifiers is considerably higher than core doped amplifiers. It is also shown that with input signal power up to 1 and 200mW pump power, a 12.5dB gain can be achieved in a 3cm long waveguide amplifier, with a noise figure of 3dB.     

Intense Upconversion Luminescence of Yb<Superscript>3+</Superscript>-Er<Superscript>3+</Superscript> in Li<Subscript>2</Subscript>O Content Tungsten-tellurite Glasses

The Er³⁺ -Yb³⁺ codoped in Li₂O content tungsten -tellurite (TWL) transparent glasses are synthesized and measured the absorption, Raman and upconversion luminescence (UPL) spectra. At room temperature intense green emission peak at 560 nm ( ⁴S_3/2→⁴I_15/2) and red emission peak at 670 nm ( ⁴F_9/2→⁴I_15/2) of Er³⁺ observed even at minimum 86 mW pumping power of infrared 980 nm excitation. For structure of the TWL glass, Raman spectrum result revealed that an important role of WO₃ in the formation of glass network linkage with Li₂O. Under this influence estimated lifetime of the ⁴I_11/2 of Er³⁺ was 1.89 μs and due to lower phonon energy of the glass produce strong upconversion signal. The effect of Er₂O₃ concentration on emission intensity result indicated that green emission intensity initially increase in compare to red emission. Under the 980 nm pump power variation measured the relatively increases the red emission to the green emission intensity and analyze the possible upconversion mechanism and process.     

Green,blue, red,near-infrared up-conversion luminescence of Yb<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript>/Tm<Superscript>3+</Superscript> co-doped YVO<Subscript>4</Subscript> nanoparticles

YVO₄:Yb³⁺,Er³⁺; YVO₄:Yb³⁺,Tm³⁺; and YVO₄:Yb³⁺,Er³⁺,Tm³⁺ were all synthesized via sol-gel method with a subsequent thermal treatment. Specifically, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ phosphors were prepared with different annealing temperatures to study the influence of temperature. The transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescent (PL) spectrofluorometer were used to investigate the morphology, crystal structure, and up-conversion luminescent properties of all samples. In summary, all samples were granular-like nanoparticles and well crystallized with the same tetragonal phase as YVO₄. Under the irradiation at 980 nm, YVO₄:Yb³⁺,Er³⁺ phosphors can generate green emission at 525 and 553 nm and red emission at 657 nm, while YVO₄:Yb³⁺,Tm³⁺ phosphors can generate blue emission at 476 nm, red emission at 648 nm, and near-infrared emission at 800 nm. Notably, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ samples can exhibit green emission, blue emission, red emission, and near-infrared emission at the same time, which might endow the as-prepared samples with potential applications in many fields, such as luminous paint, infrared detection, and biological label.     

多孔硅中的1.54μm光发射

本文报道了利用离子注入技术制备多孔硅中Er³⁺的1.54μm光发射发光材料的实验,并对样品的低温光致发光特性进行了实验研究。实验表明多孔硅中的Er³⁺发光与单晶硅中的Er³⁺发光(同样注入条件,退火工艺制备)相比,发光强度有成数量级的提高,同时发光峰更宽,伴线更丰富。     

Judd–Ofelt analysis and upconversion emission of Er3+–Yb3+ co-doped oxyfluoride glass ceramics containing LaF3 nanocrystals

Er³⁺–Yb³⁺ co-doped glasses and glass ceramics containing LaF₃ nanocrystals were prepared and their absorption spectra obtained. The Judd–Ofelt parameters Ω _t (t?=?2,?4,?6) for f–f transition of Er³⁺, as well as spontaneous emission probabilities, branching ratios and radiative lifetimes for stimulated emission of each band were determined. Addition of Er³⁺ and Yb³⁺ ions into low-phonon energy LaF₃ nanocrystals makes the upconversion emission of Er³⁺–Yb³⁺ co-doped glass ceramic much stronger than that of Er³⁺–Yb³⁺ co-doped glass.     

Optical properties of ErFOD-doped polymers and fabrication of channel waveguides

ErFOD-doped P(MMA-co-GMA) (poly-methyl-methacrylate-co-glycidyl-methacrylate) polymer film was synthesized. The NIR photoluminescence (PL) spectrum of the material showed strong characteristic emission of Er³⁺ ions with broad full width at half-maximum (FWHM) of 55 nm. The rib channel waveguide using ErFOD-doped P(MMA-co-GMA) was designed and fabricated. The loss and gain measurements of the waveguides were also characterized. Further theoretical analysis on Er³⁺ ions in P(MMA-co-GMA) was performed using Judd-Ofelt theory. The results showed that it is a promising material for the elaboration of laser or optical amplifier.     

掺Er/Er+O的GaN薄膜光学性质的研究

利用Raman散射谱研究了GaN注Er以及Er+O共注样品的振动模，并讨论了共注入O对Er离子发光的影响. 在Raman散射谱中，对于注Er的GaN样品出现了300 cm^-1和670 cm^-1两个新的Raman峰，而对于Er+O共注样品，除了上述两个峰外，在360 cm^-1处出现了另外一个新的峰，其中300 cm^-1峰可以用disorder-activated Raman scattering (DARS)来解释，670 cm^-1峰是由于与N空位相关的缺陷引起的，而360 cm^-1峰是由O注入引起的缺陷络合物产生的. 由于360 cm^-1模的缺陷出现，从而导致Er+O共注入GaN薄膜红外光致发光(PL)强度的下降. 关键词： GaN Er Raman散射 光致发光     

Abnormal Raman spectra in Er‐doped BaTiO3 ceramics

Greatly enhanced and abnormal Raman spectra were discovered in the nominal (Ba_{1 − x}Er_x)Ti_{1 − x/4}O₃ (x = 0.01) (BET) ceramic for the first time and investigated in relation to the site occupations of Er³⁺ ions. BaTiO₃ doped with Ti‐site Er³⁺ mainly exhibited the common Raman phonon modes of the tetragonal BaTiO₃. Er³⁺ ions substituted for Ba sites are responsible for the abnormal Raman spectra, but the formation of defect complexes will decrease spectral intensity. A large increase in intensity showed a hundredfold selectivity for Ba‐site Er³⁺ ions over Ti‐site Er³⁺ ions. A strong EPR signal at g = 1.974 associated with ionized Ba vacancy defects appeared in BET, and the defect chemistry study indicated that the real formula of BET is expressed by (Ba_{1 − x}Er_3x/4)(Ti_{1 − x/4}Er_x/4)O₃. These abnormal Raman signals were verified to originate from a fluorescent effect corresponding to ⁴S_3/2→⁴I_15/2 transition of Ba‐site Er³⁺ ions. The fluorescent signals were so intense that they overwhelmed the traditional Raman spectra of BaTiO₃. The significance is that the abnormal Raman spectra may act as a probe for the Ba‐site Er³⁺ occupation in BaTiO₃ co‐doped with Er³⁺ and other dopants. A new broad EPR signal at g = 2.23 was discovered, which originated from Er³⁺ Kramers ions. Copyright © 2014 John Wiley & Sons, Ltd.     

Structure and photoluminescence properties of Er3+-doped TiO2-SiO2 powders prepared by sol-gel method

Er 3+-doped TiO 2-SiO 2 powders are prepared by the sol-gel method,and they are characterized by high resolution transmission electron microscopy (HR-TEM),X-ray diffraction (XRD) spectra,and Raman spectra of the samples.It is shown that the TiO 2 nanocrystals are surrounded by an SiO 2 glass matrix.The photoluminescence (PL) spectra are recorded at room temperature.A strong green luminescence and less intense red emission are observed in the samples when they are excited at 325 nm.The intensity of the emission,which is related to the defect states,is strongest at the annealing temperature of 800 C.The PL intensity of Er 3+ ions increases with increasing Ti/Si ratio due to energy transfer between nano-TiO 2 particles and Er 3+ ions.