Temperature-programmed desorption/pulse surface reaction (tpd/tpsr) studies of CH4, C2H6, C2H4, and CO over a cobalt/MWNTs catalyst

Summary Temperature-programmed desorption (TPD) of CH₄, C₂H₆, C₂H₄, and CO and temperature-programmed pulse surface reactions (TPSR) of CH₄, C₂H₆, C₂H₄, CO, and CO/H₂ over a Co/MWNTs catalyst have been investigated. The TPD results indicated that CH₄ and C₂H₆ mainly exist as physisorbed species on the Co/MWNTs catalyst surface, whilst C₂H₄ and CO exist as both physisorbed and chemisorbed species. The TPSR results indicated that CH₄ and C₂H₆ do not undergo reaction between room temperature and 450^oC. Pulsed C₂H₄ can be transformed into CH₄ at 400 ^oC whilst pulsed CO can be transformed into CO₂ at 100 or 150^oC. In gaseous mixtures of CO and H₂ containing excess CO, the products of pulsed reaction were CH₃CHO and CH₃OH. When the ratio of CO and H₂ was 1:2, pulsed CO and H₂ were transformed into CH₃CHO, CH₃OH and CH₄. In H₂ gas flow, pulsed CO was transformed into a mixture of CH₃CHO and CH₄ between 200 and 250^oC and was transformed into CH₄ only above 250^oC.     

多晶GeSe薄膜的制备及在太阳能电池中的应用

硒化亚锗(GeSe)由于具有原材料储量丰富、绿色无毒、组成简单、稳定以及吸光系数高等优势,很适合被用于制备薄膜太阳能电池的光吸收层。然而,目前对其研究较少,其主要难点在于如何制备高质量的多晶GeSe薄膜。本工作采用物理气相沉积法制备GeSe薄膜,之后通过硫化铵溶液及退火处理,有效地将非晶GeSe转变为多晶GeSe。将其组装成简单平面薄膜结构太阳能电池器件后,相比于未处理的非晶GeSe太阳能电池,电池的光电流有了显著提升,对应的电池效率提升了13倍左右。进一步将未封装的电池放置在空气中一个月后,发现其仍能保持原有效率,证明其具有优异的稳定性。     

离子液体电沉积CuInxGa1-xSe2薄膜

采用循环伏安法(CV)对离子液体Reline中三元CuCl₂+InCl₃+SeCl₄体系和四元CuCl₂+InCl₃+GaCl₃+SeCl₄体系的电化学行为进行了研究。研究表明,In³⁺并入三元CIS(Cu-In-Se)薄膜体系和Ga³⁺并入四元CIGS(Cu-In-Ga-Se)薄膜体系均有两种途径：一是发生共沉积,二是直接还原。利用电感耦合等离子体发射光谱(ICP)和扫描电镜(SEM)对沉积电势、镀液温度和主盐浓度对CIGS薄膜组成、镀层表面形貌的影响进行了测试,结果表明通过工艺参数的选择可以控制Ga/(Ga+In)和CIGS薄膜组成并得到化学计量比为Cu_1.00In_0.78Ga_0.27Se_2.13的薄膜。     

Synthesis of the enantiomeric forms of cis and trans 1-benzyloxy-2,3-epoxy butane and of (3S,4S) 4-methyl-3-heptanol

The C₄erythro and threo diols (7) and (8) are converted either into the chiral epoxides (13) and (15) or into the enantiomers (14) and (16); the epoxide (13) is used as chiral synthon for the preparation of (3$\text{S}$,4$\text{S}$) 4-methyl-3-heptanol (21).     

Extraction of Hg/II/ with dibutylester of N-/4-antipyryl/-amidophosphoric acid from iodide solutions

A new extraction reagent-dibutylester of N-/4-antipyryl/-amidophosphoric acid/DBAAP/—has been developed and used for the extraction of divalent mercury into chloroform from mixture of sodium iodide and perchloric acid. It was found that the composition of the species extracted into the organic phase depends on the acidity of the aqueous phase. The solvate HgI₂. DBAAP is extracted at low HClO₄ concentrations, an ion-pair, /DBAAPH/⁺.HgI ₃ ^– , is formed and extracted at high concentrations of perchloric acid.     

CexZr1-xO2/Co/C-N催化CO2加氢性能研究

将不同比例的铈锆前驱体负载到ZIF-67,氮气气氛焙烧制备CexZr1-xO2/Co/C-N催化剂,对催化剂进行了XRD,H2-TPR、XPS表征,并在固定床反应器评价其CO2加氢制甲醇性能。XRD结果表明,在铈中加入适量锆形成铈锆固溶体,铈锆固溶体与钴物种较强的相互作用力可以阻止表明金属Co的氧化。但过量加入的锆又会削弱这一作用力,部分金属Co被氧化为Co3O4。H2-TPR结果表明适量的锆的加入改善催化剂的还原性能,催化剂还原温度降低。XPS证实了25%Ce0.67Zr0.33O2/Co/C-N催化剂中含有更多的氧空穴及氮含量,氧空穴和碱性氮都有利于CO2的解离吸附。优化后的25%Ce0.67Zr0.33O2/Co/C-N 催化剂在225 oC,2 MPa,GHSV = 6 L/gcat/h反应条件下取得最高甲醇时空收率,为3.0 mmol/gcat/h。     

Zn/Al/Tyr摩尔比对Tyr/Zn-Al-LDH纳米复合物的影响

The intercalation of amphoteric amino acid tyrosine （Tyr） into LDH by co-precipitation method was systematically studied. The influence of initial molar ratios （R） of LDH to Tyr has also been examined. Powder X-ray diffraction, Fourier transform infrared spectroscopy, specific surface areas and pore size distributions, and thermal analysis have been employed for the characterization of the nanocomposites. The nanohybrids were found to have an expanded layered structure except the samples prepared with low R values, indicating that the biomolecules were intercalated into the gallery as anions. The intercalation of amino acids resulted in the increase of the surface areas and pore volumes, and the value of surface areas and pore volumes increased with enhancement of biomolecules intercalated. TEM analysis revealed that with increasing biomolecules into the gallery, the nanohybrids were changed from hexagonal particles to spherical ones. Moreover, the configuration of Tyr anions was varied under different R values, changed from monolayer to bilayers with more biomolecules intercalating into the gallery.     

PVC／SBR／MBS三元共混合金的研究

对ＰＶＣ／ＳＢＲ／ＭＢＳ三元共混合金作了研究。在ＰＶＣ／ＳＢＲ体系中加入ＭＢＳ，ＰＶＣ的冲击强度可提高５．５倍，弯曲强度的保留率在８０％左右。电镜和ＤＤＶ测试表明ＭＢＳ的加入提高了ＳＢＲ对ＰＶＣ的相容性，增强了橡胶对ＰＶＣ的界面粘结力。     

Hybrid thermochemical/biological processing

The conventional view of biorefineries is that lignocellulosic plant material will be fractionated into cellulose, hemicellulose, lignin, and terpenes before these components are biochemically converted into market products. Occasionally, these plants include a thermochemical step at the end of the process to convert recalcitrant plant components or mixed waste streams into heat to meet thermal energy demands elsewhere in the facility. However, another possibility for converting high-fiber plant materials is to start by thermochemically processing it into a uniform intermediate product that can be biologically converted into a bio-based product. This alternative route to bio-based products is known as hybrid thermochemical/biological processing. There are two distinct approaches to hybrid processing: (a) gasification followed by fermentation of the resulting gaseous mixture of carbon monoxide (CO), hydrogen (H(2)), and carbon dioxide (CO(2)) and (b) fast pyrolysis followed by hydrolysis and/or fermentation of the anhydrosugars found in the resulting bio-oil. This article explores this "cart before the horse" approach to biorefineries.     

Solvent extraction separation of T1/I/ from T1/III/ with sulphoxides

A method for the separation of microgram quantities of T1/I/ and T1/III/ from hydrochloric acid solutions has been developed. T1/III/ was extracted as HTlCl₄ into benzene by di-n-pentyl sulphoxide /DPSO/ and di-n-octyl sulphoxide /DOSO/. Conditions for the effective extraction of T1/III/, free from T1/I/, have been worked out.     

Regioselective ipso formylation of p-tert-butylcalix[4]arene

A convenient procedure for direct introduction of one formyl group into p-tert-butylcalix[4]arenes through ipso substitution is described.     

Self-assembly via intermolecular hydrogen-bonding between o-/m-/p-NH2 and BF2 groups on dipyrromethenes

Boron difluoride dipyrromethenes bearing configurationally different amine groups on a meso-phenyl ring were prepared and crystallized. The ortho- and para-amino groups allow the phenyl group to inductively release greater electron density into the dipyrromethenes resulting in relatively strong intermolecular hydrogen-bonding with the terminal BF₂ groups, whereas the meta-analog formed weaker hydrogen-bonds. The intensities of the ¹H NMR peaks in concentrated solutions all increased with F-decoupling.     

离子液体电沉积CuIn_xGa_(1-x)Se_2薄膜(英文)

采用循环伏安法(CV)对离子液体Reline中三元CuCl2+InCl3+SeCl4体系和四元CuCl2+InCl3+GaCl3+SeCl4体系的电化学行为进行了研究。研究表明,In3+并入三元CIS(Cu-In-Se)薄膜体系和Ga3+并入四元CIGS(Cu-In-Ga-Se)薄膜体系均有两种途径:一是发生共沉积,二是直接还原。利用电感耦合等离子体发射光谱(ICP)和扫描电镜(SEM)对沉积电势、镀液温度和主盐浓度对CIGS薄膜组成、镀层表面形貌的影响进行了测试,结果表明通过工艺参数的选择可以控制Ga/(Ga+In)和CIGS薄膜组成并得到化学计量比为Cu1.00In0.78Ga0.27Se2.13的薄膜。     

共沉淀法掺杂SiO_2对V_2O_5-WO_3/TiO_2催化剂SCR性能的影响

通过共沉淀法将SiO_2组分掺入到V2O5-WO3/SiO_2-TiO_2催化剂TiO_2载体中,并通过多种物理化学手段,考察了不同SiO_2掺杂量对催化剂结构、表面性质与SCR性能的影响.结果表明,SiO_2掺入到TiO_2中,Si与Ti形成Si—O—Ti键,使催化剂比表面积增加.Si—O—Ti键的生成以及Si Ox物种上的-OH基团使催化剂表面Br?nsted酸增加,但新增的Br?nsted酸对SCR反应不利,并且SiO_2的掺杂也使得V~(5+)含量降低,Si—O—V键合作用使分散的VOx物种更难还原.Si组分以共沉淀法掺入到V_2O_5-WO_3/TiO_2催化剂会造成脱硝活性的显著下降.     

Methanol dehydration to produce dimethyl ether over g-Al2O3

Summary The kinetic data of about 150 points for methanol dehydration were obtained at the temperature of 240~270^oC, the GHSV of 25,000~120,000 (mL/g_cat./h) and under atmospheric pressure. The data were fitted into six plausible equations. The kinetic equation derived from the molecular adsorption of methanol on two sites fit the kinetic data best, however, that from the dissociative adsorption of methanol could not be safely ruled out. The activation energy of 114.7 kJ/mol for methanol dehydration on γ-Al₂O₃ was obtained from the kinetic analysis.     

Reduction of nitriles into aldehydes using a TMDS/V(O)(OiPr)3 reducing system

A simple and convenient method for the chemoselective reduction of nitriles into aldehydes using a 1,1,3,3-tetramethyldisiloxane (TMDS)/triisopropoxyvanadium(V) oxide reducing system is described. Aromatic as well as aliphatic nitriles are reduced into the corresponding aldehydes in moderate to good yields.     

An abnormal resonance light scattering arising from ionic-liquid/DNA/ethidium interactions

In the aqueous phase, ethidium bromide (EB) intercalates into the double helix structure of dsDNA (ds=double-stranded) with a notable enhancement in fluorescence and resonance light scattering (RLS). However, when dsDNA was extracted into an ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF(6)), an abnormal RLS arising from the interactions of IL-DNA-EB was observed, with a substantial decrease of the recorded RLS. The cationic Bmim(+) groups of BmimPF(6) intercalate into the DNA helix structure, in which they interact with the P-O bonds of phosphate groups in DNA strands and result in a reduction of the base-pair interstice along with transformation of DNA conformations that consequently prohibits the intercalation of EB with DNA. Thus, in the IL phase, the interactions between ethidium and DNA were dominated by electrostatic interactions and hydrogen bonding, leading to a congregation of EB entities around the DNA strands that results in an increase of absorption by ethidium, and consequently the inner filter effect leads to a reduction of the RLS. The present observation has been applied to the direct quantification of DNA in an ionic-liquid phase after DNA from human whole blood was extracted into BmimPF(6).     

Further neo-clerodane diterpenes from Linaria saxatilis (L.) chaz

Ele ven $\text{neo}$-clerodane diterpenoids were isolated from the aerial parts of $\text{Linaria saxatilis}$. Their structures were determined by spectroscopic and chemical methods including the transformation of one of them into the known solidagolactone.     

Preparation and characterization of nanosize nickel-substituted cobalt ferrites (Co1−xNixFe2O4)

Nanosize nickel-substituted cobalt ferrites were prepared using aerosol route and characterized by TEM, XRD, magnetic and Mössbauer spectroscopy. The particle size of as obtained samples was found to be ∼10 nm which increases upto ∼80 nm on annealing at 1200 °C. The unit cell parameter ‘a’ decreases linearly with the nickel concentration due to smaller ionic radius of nickel. The saturation magnetization for all the samples after annealing at 1200 °C lies in the range 47.6-84.5 emu/g. Room temperature Mössbauer spectra of as obtained samples exhibit a broad doublet, suggesting super paramagnetic nature of the sample. The broad doublet is further resolved into two doublets corresponding to the iron atoms residing at the surface and internal regions of the particle. The samples annealed at 1200 °C showed broad sextet, which is resolved into two sextets, corresponding to tetrahedrally and octahedrally coordinated Fe cations. Cation distribution calculated using XRD and Mössbauer data indicates a decrease in Fe³⁺(oct.)/Fe³⁺(tet.) ratio with increasing nickel concentration.     

CF4在Al2O3基金属氧化物上的分解反应

考察了在无水条件下γ-Al2O3基金属氧化物M-Al2O3(M=Mg、La、Ba、Ce、Ni、P)与CF4反应转化为金属氟化物的反应. 结果表明, 在所筛选的金属氧化物中, γ-Al2O3的初活性较高, 但由于CF4分解时产生的强放热效应使未反应的γ-Al2O3发生了α相变, 致使CF4转化率急剧下降, 反应温度越高, γ-Al2O3的α相变越快, 活性下降就越快. CF4在MgO-Al2O3上分解时, Mg物种比Al优先氟化生成了MgF2, Mg物种的氟化反应及其产生的强放热效应使MgAl2O4结构发生了解体. 在Al2O3表面负载助剂P、Ni,提高了其热稳定性, 抑制了CF4高温分解时未反应的Al2O3发生α相变, 使更多的γ-Al2O3参与了CF4分解反应.