Controlled grafting of comb copolymer brushes on poly(tetrafluoroethylene) films by surface-initiated living radical polymerizations

Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.     

To patterned binary polymer brushes via capillary force lithography and surface-initiated polymerization

An effective approach is described for the synthesis of binary patterned polymer brushes using a combination of capillary force lithography and surface-initiated polymerization. First, the approach calls for an ultrathin polystyrene (PS) mask to be deposited, in a pattern, over a surface to which a layer of polymerization initiator has already been anchored. Next, surface-initiated atom transfer radical polymerization (ATRP) is performed. This can graft the initial polymer brush onto those areas of the surface unprotected by the PS mask. After grafting is complete, the PS mask is removed and a second brush is synthesized on the newly exposed areas.     

Synthesis and characterization of tapered copolymer brushes via surface-initiated atom transfer radical copolymerization

Tapered copolymer brushes of methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA) were synthesized via surface-initiated atom transfer radical polymerization (ATRP) by gradual addition of HEMA to a reaction mixture that originally only had MMA as monomer. The copolymer brush grew linearly with polymerization time. The tapered copolymer brushes responded to selective solvent treatments. For the same tapered copolymer brush, pretreating the surface with methylene chloride made the surface more hydrophobic; pretreating the surface with methanol increased the surface hydrophilicity. This change in surface properties was reversible and considered to be caused by the solvent induced rearrangement of the polymer brushes, which is supported by atomic force microscopy images of the surface. Our work demonstrates that the properties of the tapered copolymer brush could be finely tuned by careful control of the composition profile.     

Tethering hydrophilic polymer brushes onto PPESK membranes via surface-initiated atom transfer radical polymerization

Surface-initiated atom transfer radical polymerization (ATRP) was used to graft hydrophilic comb-like poly((poly(ethylene glycol) methyl ether methacrylate), or P(PEGMA), brushes from chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) membrane surfaces. Prior to ATRP, chloromethylation of PPESK was beforehand performed and the obtained CMPPESK was prepared into porous membranes by phase inversion process. It was demonstrated that the benzyl chloride groups on the CMPPESK membrane surface afforded effective macroinitiators to graft the well-defined polymer brushes. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the grafting of P(PEGMA) chains. Water contact angle measurements indicated that the introduction of P(PEGMA) graft chains promoted remarkably the surface hydrophilicity of PPESK membranes. The effects of P(PEGMA) immobilization on membrane morphology, permeability and fouling resistance were investigated. It was found that the comb-like P(PEGMA) grafts brought smaller pore diameters and higher solute rejections to PPESK membranes. The results of dynamic anti-fouling experiments showed the anti-fouling ability of the membranes was significantly improved after the grafting of P(PEGMA) brushes.     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

Conductive polymer brushes of regioregular head-to-tail poly(3-alkylthiophenes) via catalyst-transfer surface-initiated polycondensation

We describe a new method to grow conductive polymer (CP) brushes of regioregular head-to-tail poly(3-alkylthiophenes) (P3AT) via surface-initiated polycondensation of 2-bromo-5-chloromagnesio-3-alkylthiophene. A simple procedure for the preparation of the Ni(II) macroinitiator by the reaction of Ni(PPh3)4 with photocross-linked poly-4-bromostyrene films was developed. Exposure of the initiator layers to the monomer solution leads to selective chain growth polycondensation of the monomer from the surface, resulting in P3AT brushes in a very economical way. In contrast to the P3AT films prepared by traditional solvent casting methods, our approach leads to mechanically robust CP films, stable against delamination. We believe that our approach will be helpful in the fabrication of all-plastic devices.     

Polymer brushes on hydrogen-terminated silicon substrates via stable Si—C bond

A universal and straightforward method for the preparation of polymer brushes via the formation of Si-C bond on silicon substrates through the UV-induced photopolymerization is demonstrated.     

Polymer brushes on graphene

A critical bottleneck for the widespread use of single layer graphene is the absence of a facile method of chemical modification which does not diminish the outstanding properties of the two-dimensional sp(2) network. Here, we report on the direct chemical modification of graphene by photopolymerization with styrene. We demonstrate that photopolymerization occurs at existing defect sites and that there is no detectable disruption of the basal plane conjugation of graphene. This method thus offers a route to define graphene functionality without degrading its electronic properties. Furthermore, we show that photopolymerization with styrene results in self-organized intercalative growth and delamination of few layer graphene. Under these reaction conditions, we find that a range of other vinyl monomers exhibits no reactivity with graphene. However, we demonstrate an alternative route by which the surface reactivity can be precisely tuned, and these monomers can be locally grafted via electron-beam-induced carbon deposition on the graphene surface.     

Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization

Herein we demonstrated the preparation of 3,4-ethylenedioxythiophene (EDOT) containing polynorbornylene brushes on Au surfaces via surface-initiated ring-opening metathesis polymerization (SI-ROMP). Using solid-state oxidative crosslinking technique, these polymer brushes were electrochemically converted to conjugated polymer networks. Grazing-angle FTIR spectra of polymer brushes clearly showed the characteristic vibrations of EDOT and norbornylene groups. Furthermore, densely covered Au substrates with polynorbornylene brushes were characterized by using scanning electron microscopy and atomic force microscopy.     

Universal surface-initiated polymerization of antifouling zwitterionic brushes using a mussel-mimetic peptide initiator

We report a universal method for the surface-initated polymerization (SIP) of an antifouling polymer brush on various classes of surfaces, including noble metals, metal oxides, and inert polymers. Inspired by the versatility of mussel adhesive proteins, we synthesized a novel bifunctional tripeptide bromide (BrYKY) that combines atom-transfer radical polymerization (ATRP) initiating alkyl bromide with l-3,4-dihydroxyphenylalanine (DOPA) and lysine. The simple dip-coating of substrates with variable wetting properties and compositions, including Teflon, in a BrYKY solution at pH 8.5 led to the formation of a thin film of cross-linked BrYKY. Subsequently, we showed that the BrYKY layer initiated the ATRP of a zwitterionic monomer, sulfobetaine methacrylate (SBMA), on all substrates, resulting in high-density antifouling pSBMA brushes. Both BrYKY deposition and pSBMA grafting were unambiguously confirmed by ellipsometry, X-ray photoelectron spectroscopy, and goniometry. All substrates that were coated with BrYKY/pSBMA dramatically reduced bacterial adhesion for 24 h and also resisted mammalian cell adhesion for at least 4 months, demonstrating the long-term stability of the BrYKY anchoring and antifouling properties of pSBMA. The use of BrYKY as a primer and polymerization initiator has the potential to be widely employed in surface-grafted polymer brush modifications for biomedical and other applications.     

Polymer brushes on periodically nanopatterned surfaces

Structural properties of polymer brushes tethered on a periodically nanopatterned substrate are investigated by computer simulations. The substrate consists of an alternating succession of two different types of equal-width parallel stripes, and the polymers are end-tethered selectively on every second stripe. Three distinct morphologies of the nanopatterned brush have been identified, and their range of stability has been determined in terms of a single universal parameter that combines the grafting density, the polymer length, and the stripe width. We propose scaling relations for the average brush height and for the architectural properties of the outer surface of the nanopatterned brush under good solvent conditions. Our analysis provides guidelines for fabricating well-defined and tunable nanopatterned polymeric films.     

Polymer gels and brushes at surfaces

We discuss the adsorption of polymer gels on flat surfaces. Even in cases of complete wetting, where the spreading power S is positive and where an equivalent liquid would spread, the elastic stresses due to the gel deformation upon adsorption oppose spreading. The competition between elasticity characterized by the bulk shear modulus G and capillarity, characterized by the spreading power S, defines a typical length scale 1 = S/G for the deformation in the gel. Macroscopic gels larger than 1 deform only at their edges over a region of size 1. Microscopic gels show a finite deformation despite the elastic stresses. These results can be compared to confined polymer brushes.     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.     

Microemulsion polymerizations via high-frequency ultrasound irradiation

The synthesis of nanosized polymer latex particles using high-frequency ultrasound (213 kHz) has been successfully performed. The effects of surfactant type and concentration of surfactants on the rates of polymerization, latex size, and molecular weights of the polymers produced are presented.     

Formation of photochromic spiropyran polymer brushes via surface-initiated, ring-opening metathesis polymerization: reversible photocontrol of wetting behavior and solvent dependent morphology changes

In this article, we described a method for the formation of photochromic polymer brushes grafted from oxide surfaces using surface-initiated ring-opening metathesis polymerization of spiropyran-based monomers in the presence of second generation Grubbs catalyst. The growth of the polymer film, as monitored by ellipsometry and atomic force microscopy (AFM), is strongly influenced by the initial concentrations of the catalyst and monomer, as well as reaction time. These densely packed and highly smooth polymer films were successfully used as surfaces with switchable color and wettability using light as the external stimulus. The relatively nonpolar spiropyran can be switched to a polar, zwitterionic merocyanine isomer (with a larger dipole moment) using light of the appropriate wavelength. This process is reversible and can be switched back using visible light. The spiropyran-merocyanine photoinduced isomerization gives a reversible contact angle change up to 15 degrees for smooth Si/SiO 2 substrate under sequential irradiation cycles with UV and visible light. This contact angle change can be amplified by complexing the merocyanine form with metal ions through the phenolate oxygen, which enhances the switching of wettability with these polymer brushes. Irradiation in the presence of cobalt(II) ions gives rise to a contact angle variation as high as 35 degrees . This is the largest change in photoinduced surface wettability observed for a flat substrate. Photoisomerization in spiropyrans also yields a change in the refractive index of the film, which we have investigated using ellipsometric imaging. Lastly, morphological changes accompanying photochromism were investigated using atomic force microscopy. Significant morphological changes can only be induced in the films by irradiating in polar solvents that help to stabilize the merocyanine ring open form.     

Patterned poly(N-isopropylacrylamide) brushes on silica surfaces by microcontact printing followed by surface-initiated polymerization

Patterned poly(N-isopropylacrylamide) (PNIPAAm) brushes were fabricated on oxidized silicon wafers by surface-initiated atom transfer radical polymerization of N-isopropylacrylamide from a micropatterned initiator. The patterned surface initiator was prepared by microcontact-printing octadecyltrichlorosilane and backfilling with 3-(aminopropyl)triethoxysilane followed by amidization with 2-bromo-2-methylpropionic acid. XPS and FTIR confirmed the chemical structure of the surface initiator and the PNIPAAm brushes. Surface analysis techniques, including ellipsometry, contact angle goniometry, and X-ray reflectometry (XRR), were used to characterize the thickness, roughness, hydrophilicity, and density of the polymer brushes. Tapping-mode AFM imaging confirmed the successful patterning of the PNIPAAm brushes on the oxidized silicon substrates. Variable temperature ellipsometry indicated that the lower critical solution temperature of the hydrated PNIPAAm brush was broad, occurring over the range of 20-35 degrees C. A solvatochromic fluorophore, 6-propionyl-2-dimethylaminonaphthalene (Prodan), in the PNIPAAm brush layers yielded a very similar emission to that in DMF, which can be attributed to the similarity of their chemical structures. Fluorescence microscopy further proved the successful patterning of the polymer brushes and suggested that the Prodan is localized in the patterned PNIPAAm brushes and excluded from the surrounding octadecyltrichlorosilane regions.     

Functionalization of nylon membranes via surface-initiated atom-transfer radical polymerization

The ability to manipulate and control the surface properties of nylons is of crucial importance to their widespread applications. In this work, surface-initiated atom-transfer radical polymerization (ATRP) is employed to tailor the functionality of the nylon membrane and pore surfaces in a well-controlled manner. A simple two-step method, involving the activation of surface amide groups with formaldehyde and the reaction of the resulting N-methylol polyamide with 2-bromoisobutyryl bromide, was first developed for the covalent immobilization of ATRP initiators on the nylon membrane and its pore surfaces. Functional polymer brushes of 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)monomethacrylate (PEGMA) were prepared via surface-initiated ATRP from the nylon membranes. A kinetics study revealed that the chain growth from the membranes was consistent with a "controlled" process. The dormant chain ends of the grafted HEMA polymer (P(HEMA)) and PEGMA polymer (P(PEGMA)) on the nylon membranes could be reactivated for the consecutive surface-initiated ATRP to produce the corresponding nylon membranes functionalized by P(HEMA)-b-P(PEGMA) and P(PEGMA)-b-P(HEMA) diblock copolymer brushes. In addition, membranes with grafted P(HEMA) and P(PEGMA) brushes exhibited good resistance to protein adsorption and fouling under continuous-flow conditions.     

Polymer effect in graft polymerizations of acrolein onto imidazole-containing polymer

The graft polymerizations of acrolein (AL) onto an imidazole (Im)-containing polymer, such as a homopolymer of 4(5)-vinylimidazole (VIm) and several copolymers of VIm-4-vinylpyridine (VPy), VIm-1-vinyl-2-pyrrolidone (VPr), and VIm-styrene (St), have been studied in ethanol at 0°C. The degree of polymerization (P?_n) of the resulting polyacrolein graft depended on the number of Im units in the Im-containing polymer which produced a decrease in P?_n of grafted polyacrolein. The P?_n of the graft polyacrolein was determined to be in the range of 5-23. The rate of polymerization (R_p) was expressed by R_p = k(PVIm) (AL)². The graft polymerizability of the AL was influenced by the comonomer in the parent polymer, and was found to be in the order of VIm homopolymer > VIm-VPr copolymer > VIm-VPy copolymer > VIm-St copolymer. R_p was affected by the functional group around the Im group in the Im-containing polymer. These results were discussed by assuming the conformation of the parent polymer in ethanol.     

Polymer brushes in cylindrical pores: simulation versus scaling theory

The structure of flexible polymers endgrafted in cylindrical pores of diameter D is studied as a function of chain length N and grafting density sigma, assuming good solvent conditions. A phenomenological scaling theory, describing the variation of the linear dimensions of the chains with sigma, is developed and tested by molecular dynamics simulations of a bead-spring model. Different regimes are identified, depending on the ratio of D to the size of a free polymer N(3/5). For D>N(3/5) a crossover occurs for sigma=sigma*=N(-6/5) from the "mushroom" behavior (R(gx)=R(gy)=R(gz)=N(35)) to the behavior of a flat brush (R(gz)=sigma(1/3)N,R(gx)=R(gy)=sigma(-1/12)N(1/2)), until at sigma**=(D/N)3 a crossover to a compressed state of the brush, [R(gz)=D,R(gx)=R(gy)=(N(3)D/4sigma)(1/8)相似文献