Rapid postcolumn methodology for determination of paralytic shellfish toxins in shellfish tissue

A rapid liquid chromatographic (LC) method with postcolumn oxidation and fluorescence detection (excitation 330 nm, emission 390 nm) for the determination of paralytic shellfish toxins (PSTs) in shellfish tissue has been developed. Extracts prepared for mouse bioassay (MBA) were treated with trichloroacetic acid to precipitate protein, centrifuged, and pH-adjusted for LC analysis. Saxitoxin (STX), neoSTX (NEO), decarbamoylSTX (dcSTX), and the gonyautoxins, GTX1, GTX2, GTX3, GTX4, GTX5, dcGTX2, and dcGTX3, were separated on a polar-linked alkyl reversed-phase column using a step gradient elution; the N-sulfocarbamoyl GTXs, C1, C2, C3, and C4, were determined on a C-8 reversed-phase column in the isocratic mode. Relative toxicities were used to determine STX-dihydrochloride salt (diHCl) equivalents (STXeq). Calibration graphs were linear for all toxins studied with STX showing a correlation coefficient of 0.999 and linearity between 0.18 and 5.9 ng STX-diHCI injected (equivalent to 3.9-128 microg STXeq/100 g in tissue). Detection limits for individual toxins ranged from 0.07 microg STXeq/100 g for C1 and C3 to 4.1 microg STXeq/100 g for GTX1. Spike recoveries ranged from 76 to 112% in mussel tissue. The relative standard deviation (RSD) of repeated injections of GTX and STX working standard solutions was < 4%. Uncertainty of measurement at a level of 195 microg STXeq/100 g was 9%, and within-laboratory reproducibility expressed as RSD was 4.6% using the same material. Repeatability of a 65 microg STXeq/100 g sample was 3.0% RSD. Seventy-three samples were analyzed by the new postcolumn method and both AOAC Official Methods for PST determination: the MBA (y = 1.22x + 13.99, r2 = 0.86) and the precolumn LC oxidation method of Lawrence (y = 2.06x + 12.21, r2 = 0.82).     

Determination of paralytic shellfish toxins in shellfish by receptor binding assay: collaborative study

A collaborative study was conducted on a microplate format receptor binding assay (RBA) for paralytic e shellfish toxins (PST). The assay quantifies the composite PST toxicity in shellfish samples based on the ability of sample extracts to compete with (3)H saxitoxin (STX) diHCl for binding to voltage-gated sodium channels in a rat brain membrane preparation. Quantification of binding can be carried out using either a microplate or traditional scintillation counter; both end points were included in this study. Nine laboratories from six countries completed the study. One laboratory analyzed the samples using the precolumn oxidation HPLC method (AOAC Method 2005.06) to determine the STX congener composition. Three laboratories performed the mouse bioassay (AOAC Method 959.08). The study focused on the ability of the assay to measure the PST toxicity of samples below, near, or slightly above the regulatory limit of 800 (microg STX diHCl equiv./kg). A total of 21 shellfish homogenates were extracted in 0.1 M HCl, and the extracts were analyzed by RBA in three assays on separate days. Samples included naturally contaminated shellfish samples of different species collected from several geographic regions, which contained varying STX congener profiles due to their exposure to different PST-producing dinoflagellate species or differences in toxin metabolism: blue mussel (Mytilus edulis) from the U.S. east and west coasts, California mussel (Mytilus californianus) from the U.S. west coast, chorito mussel (Mytilus chiliensis) from Chile, green mussel (Perna canaliculus) from New Zealand, Atlantic surf clam (Spisula solidissima) from the U.S. east coast, butter clam (Saxidomus gigantea) from the west coast of the United States, almeja clam (Venus antiqua) from Chile, and Atlantic sea scallop (Plactopecten magellanicus) from the U.S. east coast. All samples were provided as whole animal homogenates, except Atlantic sea scallop and green mussel, from which only the hepatopancreas was homogenized. Among the naturally contaminated samples, five were blind duplicates used for calculation of RSDr. The interlaboratory RSDR of the assay for 21 samples tested in nine laboratories was 33.1%, yielding a HorRat value of 2.0. Removal of results for one laboratory that reported systematically low values resulted in an average RSDR of 28.7% and average HorRat value of 1.8. Intralaboratory RSDr based on five blind duplicate samples tested in separate assays, was 25.1%. RSDr obtained by individual laboratories ranged from 11.8 to 34.9%. Laboratories that are routine users of the assay performed better than nonroutine users, with an average RSDr of 17.1%. Recovery of STX from spiked shellfish homogenates was 88.1-93.3%. Correlation with the mouse bioassay yielded a slope of 1.64 and correlation coefficient (r(2)) of 0.84, while correlation with the precolumn oxidation HPLC method yielded a slope of 1.20 and an r(2) of 0.92. When samples were sorted according to increasing toxin concentration (microg STX diHCl equiv./kg) as assessed by the mouse bioassay, the RBA returned no false negatives relative to the 800 microg STX diHCl equiv./kg regulatory limit for shellfish. Currently, no validated methods other than the mouse bioassay directly measure a composite toxic potency for PST in shellfish. The results of this interlaboratory study demonstrate that the RBA is suitable for the routine determination of PST in shellfish in appropriately equipped laboratories.     

Assessment of MIST Alert,a commercial qualitative assay for detection of paralytic shellfish poisoning toxins in bivalve molluscs

A recently developed commercial rapid test kit (MIST Alert) was assessed for determination of the presence of paralytic shellfish poisoning (PSP) toxins in shellfish. Several commercially important shellfish species obtained from the UK shellfish toxin monitoring program, containing a range of total PSP toxicities as determined by the mouse bioassay (MBA), were tested. The kit detected toxin in all samples containing the European Community tolerance level of 80 microg saxitoxin (STX) equivalents/100 g shellfish flesh as determined by the MBA. With one exception, the kit detected toxin in all samples that contained >40 microg STX equivalents/100 g according to the MBA. Among samples in which the MBA did not detect toxin, the kit disagreed in 25% of the tests, although further analysis by liquid chromatography (LC) and MBA of some samples confirmed the presence of toxins. These results suggest that MIST Alert may be suitable as an initial screen for PSP toxins as part of routine monitoring programs, thereby greatly reducing the number of MBAs. Trials were also performed by nonscientific personnel to evaluate the ease of use and interpretation of results obtained by MIST Alert. The results indicated that the kits could be readily used and accurately interpreted by individuals with no technical or scientific background.     

Liquid chromatography post-column oxidation (PCOX) method for the determination of paralytic shellfish toxins in mussels, clams, oysters, and scallops: collaborative study

Sixteen laboratories participated in a collaborative study to evaluate method performance parameters of a liquid chromatographic method of analysis for paralytic shellfish toxins (PST) in blue mussels (Mytilus edulis), soft shell clams (Mya arenaria), sea scallops (Placopectin magellanicus), and American oysters (Crassostrea virginicus). The specific analogs tested included saxitoxin, neosaxitoxin, gonyautoxins-1 to -5, decarbamoyl-gonyautoxins-2 and -3, decarbamoyl-saxitoxin, and N-sulfocarbamoyl-gonyautoxin-2 and -3. This instrumental technique has been developed as a replacement for the current AOAC biological method (AOAC Official Method 959.08) and an alternative to the pre-column oxidation LC method (AOAC Official Method 2005.06). The method is based on reversed-phase liquid chromatography with post-column oxidation and fluorescence detection (excitation 330 nm and emission 390 nm). The shellfish samples used in the study were prepared from the edible tissues of clams, mussels, oysters, and scallops to contain concentrations of PST representative of low, medium, and high toxicities and with varying profiles of individual toxins. These concentrations are approximately equivalent to 1/2 maximum level (ML), ML, or 2xML established by regulatory authorities (0.40, 0.80, and 1.60 mg STX diHCl eq/kg, respectively). Recovery for the individual toxins ranged from 104 to 127%, and recovery of total toxin averaged 116%. Horwitz Ratio (HorRat) values for individual toxins in the materials included in the study were generally within the desired range of 0.3 to 2.0. For the estimation of total toxicity in the test materials, the reproducibility relative standard deviation ranged from 4.6 to 20%. A bridging study comparing the results from the study participants using the post-column oxidation (PCOX) method with the results obtained in the study director's laboratory on the same test materials using the accepted reference method, the mouse bioassay (MBA; AOAC Official Method 959.08), showed that the average ratio of results obtained from the two methods was 1.0. A good match of values was also achieved with a new certified reference material. The results from this study demonstrated that the PCOX method is a suitable method of analysis for PST in shellfish tissue and provides both an estimate of total toxicity, equivalent to that determined using the MBAAOAC Official Method 959.08, and a detailed profile of the individual toxin present in the sample.     

Determination of brevetoxins in shellfish by LC/MS/MS: single-laboratory validation

A single-laboratory validation is reported for an LC/MS/MS quantification of six brevetoxins in four matrixes (Greenshell mussel, eastern oyster, hard clam, and Pacific oyster). Recovery and precision data were collected from seven analytical batches using shellfish flesh at 0.05 mg/kg. Method recoveries and within-laboratory reproducibility ranged from 73 to 112%, with an RSD between 14 and 18% for brevetoxin-3, brevetoxin B5, brevetoxin B2, and S-desoxy brevetoxin B2. The recovery and within-laboratory reproducibility for brevetoxin-2 was 61%, with an RSD of 27%. Brevetoxin B1 gave an RSD of 12%, but no reference material was available and this toxin was only recorded in a hard clam sample naturally contaminated with brevetoxins. One naturally contaminated sample of each shellfish matrix, with brevetoxin levels ranging from 0.012 to 9.9 mg/kg, was tested in multiple batches, and the RSDs were similar to those for fortified samples at 0.05 mg/kg. Comparisons with limited data for the neurotoxic shellfish poisoning mouse bioassay for four naturally contaminated shellfish samples showed that the regulatory action limit of 0.8 mg/kg is conservative with respect to the bioassay regulatory limit of 20 mouse units/100 g.     

Extension of the validation of AOAC Official Method 2005.06 for dc-GTX2,3: interlaboratory study

AOAC Official Method(SM) 2005.06 for the determination of saxitoxin (STX)-group toxins in shellfish by LC with fluorescence detection with precolumn oxidation was previously validated and adopted First Action following a collaborative study. However, the method was not validated for all key STX-group toxins, and procedures to quantify some of them were not provided. With more STX-group toxin standards commercially available and modifications to procedures, it was possible to overcome some of these difficulties. The European Union Reference Laboratory for Marine Biotoxins conducted an interlaboratory exercise to extend AOAC Official Method 2005.06 validation for dc-GTX2,3 and to compile precision data for several STX-group toxins. This paper reports the study design and the results obtained. The performance characteristics for dc-GTX2,3 (intralaboratory and interlaboratory precision, recovery, and theoretical quantification limit) were evaluated. The mean recoveries obtained for dc-GTX2,3 were, in general, low (53.1-58.6%). The RSD for reproducibility (RSD(r)%) for dc-GTX2,3 in all samples ranged from 28.2 to 45.7%, and HorRat values ranged from 1.5 to 2.8. The article also describes a hydrolysis protocol to convert GTX6 to NEO, which has been proven to be useful for the quantification of GTX6 while the GTX6 standard is not available. The performance of the participant laboratories in the application of this method was compared with that obtained from the original collaborative study of the method. Intralaboratory and interlaboratory precision data for several STX-group toxins, including dc-NEO and GTX6, are reported here. This study can be useful for those laboratories determining STX-group toxins to fully implement AOAC Official Method 2005.06 for official paralytic shellfish poisoning control. However the overall quantitative performance obtained with the method was poor for certain toxins.     

Method for the rapid determination of protein in meats using the CEM Sprint protein analyzer: collaborative study

A collaborative study was conducted to determine the protein content of raw and processed meat products by a protein-tagging and colorimetric technique. Meat products were prepared following AOAC Official Method 983.18 and analyzed using CEM Corporation's Sprint Rapid Protein Analyzer. Sprint provides protein results by combining an accurately weighed test portion with a known amount of dye-binding agent. The dye-binding agent binds with the lysine, histidine, and arginine, as well as the n-terminus of the proteins commonly found in raw meat and processed meat products. Results are displayed and reported by the Sprint as a percentage (g/100 g) of protein. Ten blind duplicate study samples were sent to 10 collaborating laboratories in the United States. The within-laboratory (repeatability) relative standard deviation (RSD(r)) ranged from 0.91 to 3.04%, and between-laboratories (reproducibility) relative standard deviation (RSDR) ranged from 1.50 to 3.41% for protein. The method is recommended for Official First Action.     

Receptor binding assay for paralytic shellfish poisoning toxins: optimization and interlaboratory comparison

A receptor binding assay (RBA) for detection of paralytic shellfish poisoning (PSP) toxins was formatted for use in a high throughput detection system using microplate scintillation counting. The RBA technology was transferred from the National Ocean Service, which uses a Wallac TriLux 1450 MicroBeta microplate scintillation counter, to the California Department of Health Services, which uses a Packard TopCount scintillation counter. Due to differences in the detector arrangement between these 2 counters, markedly different counting efficiencies were exhibited, requiring optimization of the RBA protocol for the TopCount instrument. Precision, accuracy, and sensitivity [limit of detection = 0.2 microg saxitoxin (STX) equiv/100 g shellfish tissue] of the modified protocol were equivalent to those of the original protocol. The RBA robustness and adaptability were demonstrated by an interlaboratory study, in which STX concentrations in shellfish generated by the TopCount were consistent with MicroBeta-derived values. Comparison of STX reference standards obtained from the U.S. Food and Drug Administration and the National Research Council, Canada, showed no observable differences. This study confirms the RBA's value as a rapid, high throughput screen prior to testing by the conventional mouse bioassay (MBA) and its suitability for providing an early warning of increasing PSP toxicity when toxin levels are below the MBA limit of detection.     

Influence of the sample toxic profile on the suitability of a high performance liquid chromatography method for official paralytic shellfish toxins control

An HPLC-FLD method, involving pre-chromatographic oxidation of the PSP toxins with hydrogen peroxide and periodate, has been AOAC validated through a collaborative trial and adopted as AOAC Official Method. This method could be a candidate for replacing the mouse bioassay (MBA) for the Official Control of PSP toxins at European level, once accepted by the legislation. An interlaboratory exercise has been organized by the CRLMB to evaluate its "fitness for purpose" for the Official Control of PSP toxins in the EU laboratories. Eighteen EU laboratories took part in the study and had to analyze six bivalve mollusc samples with several PSP toxic profiles. The performance of the participant laboratories in the application of this method was compared with that obtained at the collaborative trial. Information on problems/drawbacks encountered by participants in the application of this method was also sought. The HPLC validated method is only applicable for Official PSP Control for certain samples. This depends on sample PSP toxic profile. Results obtained for samples where only GTX2,3 and STX were present were satisfactory and in agreement with MBA results. Results obtained for a sample with a toxic profile dominated by GTX6 and suspected to contain also C1,2 and C3,4 were not satisfactory. GTX5 and dc-STX could be quantified, although the results achieved (total toxicity) were lower than those obtained by MBA. It can be also useful as a screening method, complementary to MBA, helping in the reduction of the animals used. However, the lack of several PSP standards, the fact that the method is not validated for all the PSP toxins, and several drawbacks found in its application are a handicap to fully implement it for Official PSP Control as a viable replacement for bioassay.     

Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.     

Capillary electrophoresis inductively coupled plasma mass spectrometry combined with metal tag for ultrasensitively determining trace saxitoxin in seafood

As one of paralytic shellfish toxins, the saxitoxin (STX) in the aqueous environment can be accumulated by most shellfish, and thus harms human health through the food chain. Therefore, it is crucial to determine trace STX in seafood samples in order to ensure the safety of seafood consumption. In this study, we developed a novel indirect method for ultrasensitively determining trace STX in seafood by using CE‐ICP‐MS together with Eu³⁺ chelate labeling. We demonstrated that diethylenetriamine‐N ,N ,N ′,N ″,N ″‐pentaacetic acid (DTPA) can couple with STX and simultaneously chelate with Eu³⁺ to realize metallic labeling of STX, and thus realize the ultrasensitive quantification of trace STX with CE‐ICP‐MS. The proposed method has strong antiinterference ability, good stability, and extremely high sensitivity. It could be used to determine trace STX in seafood samples with an extremely low detection limit of 0.38 fmol (3.8×10⁻⁹ M, 100 nL sample injection) and a relative standard deviation (RSD, n = 5) <7%. The success of this study provides an alternative to precise quantification of ultra‐trace STX in seafood samples, and further expands the application of ICP‐MS.     

Determination of fat, moisture, and protein in meat and meat products by using the FOSS FoodScan Near-Infrared Spectrophotometer with FOSS Artificial Neural Network Calibration Model and Associated Database: collaborative study

A collaborative study was conducted to evaluate the repeatability and reproducibility of the FOSS FoodScan near-infrared spectrophotometer with artificial neural network calibration model and database for the determination of fat, moisture, and protein in meat and meat products. Representative samples were homogenized by grinding according to AOAC Official Method 983.18. Approximately 180 g ground sample was placed in a 140 mm round sample dish, and the dish was placed in the FoodScan. The operator ID was entered, the meat product profile within the software was selected, and the scanning process was initiated by pressing the "start" button. Results were displayed for percent (g/100 g) fat, moisture, and protein. Ten blind duplicate samples were sent to 15 collaborators in the United States. The within-laboratory (repeatability) relative standard deviation (RSD(r)) ranged from 0.22 to 2.67% for fat, 0.23 to 0.92% for moisture, and 0.35 to 2.13% for protein. The between-laboratories (reproducibility) relative standard deviation (RSD(R)) ranged from 0.52 to 6.89% for fat, 0.39 to 1.55% for moisture, and 0.54 to 5.23% for protein. The method is recommended for Official First Action.     

Confirmation of synthetic glucocorticoids with liquid chromatography/mass spectrometry: organization and results of an international interlaboratory comparison test

Within the framework of a European Union (EU) research project entitled "Food Safety Screening: Synthetic Glucocorticoids (QLK1-1999-00122)," an international interlaboratory ring test was organized to compare and evaluate different liquid chromatography/mass spectrometry (LC/MS) confirmatory methods that are applied in European monitoring programs for detecting the use of synthetic glucocorticoids. Liver and urine samples of bovines treated with synthetic glucocorticoids were collected and sent to the participants of the study for analysis. Participants received 3 liver and 3 urine samples and were free to use either their own LC/MS method or an LC/MS-based method developed during the EU research project. The residue concentrations in the samples were calculated as the mean of the concentrations reported by each laboratory. The mean dexamethasone concentration of liver sample L1 was calculated as 2.27 microg/kg [relative standard deviation (RSD) 43%, n = 9], which exceeds the maximum residue level (MRL) of 2 microg/kg. Three of the 9 laboratories (33%) reported concentration levels less than 2 microg/kg, resulting in obviously false compliant results. The overall mean concentration of flumethasone in liver sample L2 was calculated as 3.27 microg/kg (RSD 33%, n = 8). Applying a comparable limit for flumethasone of 2 microg/kg, 8 of the 9 laboratories would have obtained a correct noncompliant result. As for the blank liver sample, 1 participant found a false noncompliant result. The urine sample U1 contained prednisolone residues at a mean concentration of 1.58 microg/kg (RSD 43%, n = 9). Four out of 9 results were less than a theoretical minimum required performance level (MRPL) of 2 microg/kg. The calculated concentration of dexamethasone in urine sample U3 was 5.21 microg/kg (RSD 62%, n = 9). One of the 9 results was lower than 2 microg/kg. Urine sample U2 was correctly reported as blank by all participants.     

Determination of niacin in infant formula by solid-phase extraction and anion-exchange liquid chromatography.

A peer-verified, solid-phase extraction (SPE)/anion exchange liquid chromatographic method is presented for the determination of niacin in milk-based and soy-based infant formula. Analysis is in 3 steps: test sample digestion, extraction/cleanup, and liquid chromatography (LC). Digestion uses a standard AOAC digestion procedure that involves autoclaving at 121 degrees C for 45 min in (1 + 1) H2SO4 to free endogenous niacin from protein and to convert added niacinamide to niacin. The digest solution is adjusted to pH 6.5 with 7.5M NaOH. Acidification to pH <1.0 with (1 + 1) H2SO4 precipitates the protein. The clarified solution is then filtered, and the filtrate is brought to volume. SPE of niacin is accomplished by passing an aliquot of the digest solution through an aromatic sulfonic acid-SPE (ArSCX-SPE) column. After the column is washed with methanol and water to remove extraneous material, the niacin is eluted with 0.25M sodium acetate/acetic acid buffer at pH 5.6. An anion-exchange polystyrene-divinylbenzene column with 0.1 M sodium acetate/acetic acid buffer at pH 4.0 is used for LC. Niacin is determined by UV detection at 260 nm. A standard curve is prepared by passing known amounts of niacin through the ArSCX-SPE columns used for niacin extraction. The following values for x and relative standard deviation (RSD) were obtained for National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula with a certified value for niacin of 63.3 +/- 7.6 microg/g: Submitting laboratory.-- x = 59.7 +/- 4.0 microg/g; RSD = >6.7%; confidence interval (CI) = +/- 1.4 microg/g; n = 27. Peer laboratory.--x = 56.6 +/- 6.6 microg/g; RSD = >11.7%; CI =+/- 4.1 microg/g; n = 8.     

New fluorimetric method of liquid chromatography for the determination of the neurotoxin domoic acid in seafood and marine phytoplankton

Domoic acid (DA) is a neurotoxic amino acid that is responsible for the human toxic syndrome, amnesic shellfish poisoning (ASP). A new rapid, sensitive liquid chromatographic (LC) method has been developed for the determination of DA in various marine samples. DA in marine biological materials was derivatised with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) and analysed using isocratic reversed-phase LC with fluorimetric detection. The calibration, based on standard DA solutions, was linear in the range 0.04-2 microg/ml (r2=0.998) and the detection limit (3:1, signal/noise) was better than 1 ng/ml. Using the certified reference material (MUS-1B), recoveries of DA from shellfish tissue were >95% (n=5). When a strong anion exchange SPE cartridge was used for sample clean-up the detection limit was 6 ng DA/g mussel tissue. Good reproducibility was achieved with RSD values ranging from 3% for 8 microg DA/g (n=5), to 5% for 0.04 microg DA/g (n=5). This new method was successfully applied to the determination of DA in naturally contaminated shellfish and in marine phytoplankton cultures of Pseudonitzschia sp.     

Determination of moisture and fat in meats by microwave and nuclear magnetic resonance analysis: collaborative study

Ten laboratories participated in a collaborative study to determine the total moisture and fat in raw and processed meat products by microwave drying and nuclear magnetic resonance (NMR) spectroscopy. Meat products were prepared following the AOAC Method and analyzed using CEM Corp.'s SMART Trac Moisture and Fat Analysis system. SMART Trac provides moisture results by measuring the weight loss on drying by microwave energy. The dried sample is then analyzed by NMR spectrometry for fat content. Moisture and fat results are displayed and reported by the SMART Trac as a percentage (g/100 g). Microwave drying is an AOAC-approved reference method (Method 985.14), Moisture in Meat and Poultry Products. NMR spectrometry is a secondary technique used to determine the concentration of various constituents in biological, organic, or chemical samples. The study design was based on Youden's matched pair principle for collaborative tests. For the purposes of this study, 10 laboratories each tested 10 Youden matched pairs, for a total of 20 samples. The study samples represented a range of products processed daily in plant operations. Included were raw meat samples (beef, pork, chicken, and turkey) as well as processed meats (beef hot dog, pork sausage, and ham). The total moisture content of the undiluted samples, as received for the purposes of this study, was determined by AOAC Method 950.46 and ranged from 54.03 to 74.99%. The total fat content of the undiluted samples was determined by AOAC Method 960.39 and ranged from 1.00 to 29.79%. Statistical analysis of study results for total moisture yielded a relative standard deviation for repeatability (RSDr) range of 0.14 to 0.95% and a relative standard deviation for reproducibility (RSDR) range of 0.26 to 0.95%. Statistical analysis for total fat yielded similar RSDr and RSDR range of 0.74 to 4.08%. Results for turkey had higher RSDr and RSDR values, both at 12.6%, due to low fat content and possibly to the separation of the samples observed by some of the collaborators. Results demonstrate that microwave drying with NMR is a rapid, practical method providing results equivalent to AOAC Methods 950.46 (Forced Air Oven Drying) and 960.39 (Soxhlet Ether Extraction) in raw and processed meat products.     

Gliadin as a measure of gluten in foods containing wheat, rye, and barley-enzyme immunoassay method based on a specific monoclonal antibody to the potentially celiac toxic amino acid prolamin sequences: collaborative study

The Working Group on Prolamin Analysis and Toxicity (WGPAT) organized a collaborative study to confirm whether the two R5 antibody-based ELISA test kits are able to detect gliadin in the lower mg/kg (ppm) level. Twenty laboratories investigated 12 blind-coded samples, spiked and naturally contaminated, to show the possibility of determining traces of gliadin in heat-treated or nonheat-treated foods by ELISA. It was shown that very small amounts of gliadin (below 100 ppm) could be detected by ELISA with a reproducibility RSD(R) (37%) and a repeatability RSD, (27%) common for ELISA under these conditions. The recovery of gliadin from the spiked samples was between 84 and 109%, based on the results of all laboratories, including those with poor performance. No false positives were found by the method (P < or =0.05), but one negative sample was contaminated during the bakery process. It is recommended that the method be accepted by AOAC as Official First Action.     

Liquid chromatography/quadrupole time-of-flight mass spectrometry for determination of saxitoxin and decarbamoylsaxitoxin in shellfish

Saxitoxin (STX) and decarbamoylsaxitoxin (dcSTX) were determined by liquid chromatography with quadrupole time-of-flight mass spectrometry (Q-TOF MS). A shellfish tissue was extracted with 0.1 mol/l HCl under ultrasonication, and cleanup of extract was accomplished by solid-phase extraction with a C18 cartridge. Chromatographic separation was carried out on a C18 column (150 mm x 2.1 mm, 3.5 microm) with gradient elution of MeOH-H2O (20:80) containing 0.05% heptafluorobutyric acid and MeOH-H2O (15:85) containing 0.05% acetic acid. The protonated molecule [M + H]+ ions at m/z 257 for dcSTX and 300 for STX were selected in precursor ion scanning for Q-TOF MS in the positive electrospray ionizaion mode. Average recoveries and relative standard deviations, by analyzing samples spiked at a level of 0.1, 0.8 or 1.6 microg/g, were 84-92 and 8-14%, respectively. Identification of the presence of the toxins in shellfish tissues was based on the structural information offered by Q-TOF MS.     

Determination of niacin in infant formula by solid-phase extraction/liquid chromatography: peer-verified method performance-interlaboratory validation

This paper reports the results of the interlaboratory peer validation study of AOAC Peer-Verified Method (PVM) 1:2,000 for the determination of niacin in infant formula by solid-phase extraction/liquid chromatography. We have used a Data Quality Objectives (DQO) approach to address not only method variability and robustness but also accuracy of data through the use of an appropriate reference material in conjunction with the interlaboratory validation study. Our DQO included the following: (1) statistical agreement of analytical results and quantitative recovery between 2 collaborating laboratories; (2) the repeatability relative standard deviation (RSDr) values and the HORRAT (Horwitz ratio) obtained (1.07), which satisfied the criteria of the Horwitz "limits of acceptability" at the analyte level present; (3) validation of lack of interference; and (4) accuracy agreement within assigned values for a certified reference material. National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula, with a certified value of 63.3 +/- 7.6 microg/g for niacin content, was used as a test material for collaborative study and accuracy assessment. Niacin values obtained by the originating laboratory were 59.7 +/- 4.0 microg/g (95% confidence interval [CI] = 1.4 microg/g with a relative standard deviation [RSD] of 6.7%) and by the peer laboratory were 56.6 +/- 6.6 microg/g (95% CI = 4.1 microg/g, with an RSD of 11.7%). Statistical evaluation using the means equivalence test showed that nicotinic acid values obtained by the peer laboratory were equivalent to those values obtained by the originating laboratory. Linear calibration curves and quantitative recovery were obtained. Integration of the PVM process with a readily available certified reference material gives the user confidence in the accuracy of the data generated by the method through traceability to the reference material used.     

Determination of total gaseous lead in the atmosphere by honeycomb denuder/electrothermal atomic absorption spectrometry.

A technique is described for the determination of total gaseous lead in the atmosphere by honeycomb denuder collection, followed by an electrothermal atomic absorption spectrometry (ETAAS) measurement. The collection efficiency of the honeycomb denuder in which a solution containing 2% HNO3/2% glycerine/1% ammonium dihydrogenphosphate was coated for trapping the gaseous lead in the atmosphere was 98.8%. The linear absorbance response was obtained for a concentration range of 0-1.39 microg m(-3) of lead in the atmosphere. A precision of 4.8% RSD (peak-height absorbance, n = 11) for an aqueous solution of 1 ng of lead standard, characteristic masses (CM) of 23 pg and detection limit (3sigma) of 54 pg for an aqueous solution of 0.01 ng lead standard was achieved with 100 microg ammonium dihydrogenphosphate as a chemical modifier. The average recovery of lead in three standard samples prepared by the independent digestion of NIST SRM 1648 (Urban Particulate Matter) using our analytical system was 97.8%. The total content of the gaseous lead in the atmosphere of our laboratories was 0.35-0.38 microg m(-3).