Proton-coupled electron transfer of cytochrome c.

Cytochrome c (Cyt-c) was electrostatically bound to self-assembled monolayers (SAM) on an Ag electrode, which are formed by omega-carboxyl alkanethiols of different chain lengths (C(x)). The dynamics of the electron-transfer (ET) reaction of the adsorbed heme protein, initiated by a rapid potential jump to the redox potential, was monitored by time-resolved surface enhanced resonance Raman (SERR) spectroscopy. Under conditions of the present experiments, only the reduced and oxidized forms of the native protein state contribute to the SERR spectra. Thus, the data obtained from the spectra were described by a one-step relaxation process yielding the rate constants of the ET between the adsorbed Cyt-c and the electrode for a driving force of zero electronvolts. For C(16)- and C(11)-SAMs, the respective rate constants of 0.073 and 43 s(-1) correspond to an exponential distance dependence of the ET (beta = 1.28 A(-1)), very similar to that observed for long-range intramolecular ET of redox proteins. Upon further decreasing the chain length, the rate constant only slightly increases to 134 s(-1) at C(6)- and remains essentially unchanged at C(3)- and C(2)-SAMs. The onset of the nonexponential distance dependence is paralleled by a kinetic H/D effect that increases from 1.2 at C(6)- to 4.0 at C(2)-coatings, indicating a coupling of the redox reaction with proton-transfer (PT) steps. These PT processes are attributed to the rearrangement of the hydrogen-bonding network of the protein associated with the transition between the oxidized and reduced state of Cyt-c. Since this unusual kinetic behavior has not been observed for electron-transferring proteins in solution, it is concluded that at the Ag/SAM interface the energy barrier for the PT processes of the adsorbed Cyt-c is raised by the electric field. This effect increases upon reducing the distance to the electrode, until nuclear tunneling becomes the rate-limiting step of the redox process. The electric field dependence of the proton-coupled ET may represent a possible mechanism for controlling biological redox reactions via changes of the transmembrane potential.     

Redox-linked protein dynamics of cytochrome c probed by time-resolved surface enhanced infrared absorption spectroscopy

Time-resolved surface enhanced infrared absorption (SEIRA) spectroscopy is employed to analyse the dynamics of the protein structural changes coupled to the electron transfer process of immobilised cytochrome c (Cyt-c). Upon electrostatic binding of Cyt-c to Au electrodes coated with self-assembled monolayers (SAMs) of carboxyl-terminated thiols, cyclic voltammetric measurements demonstrate a reversible redox process with a redox potential that is similar to that of Cyt-c in solution, and a non-exponential distance-dependence of the electron transfer rate as observed previously (D. H. Murgida and P. Hildebrandt, Chem. Soc. Rev. 2008, 37, 937). On the basis of characteristic redox-state-sensitive amide I bands, the protein structural changes triggered by the electron transfer are monitored by rapid scan and step scan SEIRA spectroscopy in combination with the potential jump technique. Whereas the temporal evolution of the conjugate bands at 1693 and 1673 cm(-1) displays the same rate constants as electron transfer, the time-dependent changes of the 1660-cm(-1) band are slower by about a factor of 2. The study demonstrates that time-resolved SEIRA spectroscopy provides further information about the dynamics and mechanism of interfacial processes of redox proteins, thereby complementing the results obtained from other surface-sensitive techniques. In comparison with previous surface enhanced resonance Raman spectroscopic findings, the present results are discussed in terms of the local electric field strengths at the Au/SAM/Cyt-c interface.     

Redox processes of cytochrome c immobilized on solid supported polyelectrolyte multilayers

The heme protein cytochrome c (Cyt-c), immobilized on polyelectrolyte multilayers on a silver electrode, was studied by stationary and time-resolved surface-enhanced resonance Raman (SERR) spectroscopy to probe the redox site structure and the mechanism and dynamics of the potential-dependent interfacial processes. The layers were built up by sequential adsorption of polycations (poly[ethylene imine] (PEI); polyallylamine hydrochloride (PAH)) and polyanions (poly[styrene sulfonate] (PSS)). All multilayers terminated by PSS electrostatically bind Cyt-c. On PEI/PSS coatings, Cyt-c is peripherally bound and fully redox-active. Due to the interfacial potential drop, the apparent redox potential is lowered by 40 mV compared to that in solution. The rate constant for the heterogeneous electron transfer (ET) of ca. 0.1 s(-1) is consistent with electron tunneling through largely ordered PEI/PSS layers. ET is coupled to a reversible conformational transition of Cyt-c that involves a change of the coordination pattern of the heme. Additional (PAH/PSS) double layers cause a broadening of the redox transition and a drastic negative shift of the redox potential, which is attributed to the formation of PSS/Cyt-c complexes. It is concluded that Cyt-c can effectively compete with PAH for binding of PSS, resulting in a rearrangement of the layered structure and a penetration of the PSS-bound Cyt-c into the PAH/PSS double layers. This conclusion is consistent with SERR intensity and quartz microbalance measurements. ET was found to be overpotential-independent and faster than that for PEI/PSS coatings, which is interpreted in terms of specific PSS/Cyt-c complexes serving as gates for the heterogeneous ET.     

Interfacial bridge-mediated electron transfer: mechanistic analysis based on electrochemical kinetics and theoretical modelling

Understanding the physical and chemical factors that control the kinetics of interfacial electron-transfer (ET) reactions is important for a large number of technological applications. The present article describes electrochemical kinetic studies of these factors, in which standard interfacial ET rate constants (k(0)(l)) have been measured for ET between substrate Au electrodes and various redox couples attached to the electrode surfaces by variable lengths (l) of oligomethylene (OM), oligophenylenevinylene (OPV) and oligophenyleneethynylene (OPE) bridges, which were constituents of mixed self-assembled monolayers (SAMs). The k(0)(l) measurements employed the indirect laser-induced temperature jump (ILIT) technique, which permits the measurement of interfacial ET rates that are orders of magnitude faster than those measurable by conventional techniques using the macroelectrodes that are the most convenient substrates for the mixed SAMs. The robustness of the measured rate constants (k(0)(l)), together with the Arrhenius activation energies (E(a)(l)) and preexponential factors (A(l)), is demonstrated by their invariance with respect to several experimental system parameters (including the chemical nature and length of the diluent component of the mixed SAM). Analysis of the kinetic results demonstrates that all of the observed interfacial ET processes proceed through a common type of transition state (predominantly associated with solvent reorganization around the redox moiety) and that the actual ET step involves direct electronic tunnelling between the Au electrode and the redox moiety. However, for the full range of l investigated, a global exponential decay of A(l) is not found for any of the three types of bridges. Possible reasons for this behavior, including the role of rate determining steps associated with adiabatic mechanisms within or beyond the transition state theory framework, are discussed, and comparisons with related conductance measurements are presented.     

Effect of the electrostatic interaction on the redox reaction of positively charged cytochrome C adsorbed on the negatively charged surfaces of acid-terminated alkanethiol monolayers on a Au(111) electrode

The electrochemical properties of cytochrome c (cyt c) adsorbed on mixed self-assembled monolayers (SAMs) of 2-mercaptoethanesulfonate (MES)/2-mercaptoethanol (MEL) are compared with those on single-component SAMs of MES, MEL, and mercaptopropionic acid (MPA), using cyclic voltammetry and potential-modulated UV-vis reflectance spectroscopy. The rate constant of electron transfer (ET), k(et), of cyt c adsorbed on the SAM of MPA decreases from 1450 +/- 210 s(-1) at pH 7 to 890 +/- 100 s(-1) at pH 9. In contrast, the value of k(et) of cyt c on the SAM of MES is pH-independent at 100 +/- 15 s(-1). Those facts suggest that a large negative charge density on the SAM surface slows down the ET between cyt c and the electrode. The surface charge density of the SAM affects also the amount of electroactive cyt c, Gamma(e), which decreases from 10.0 +/- 1.0 to 5.3 +/- 1.1 pmol cm(-2) with increasing pH from 7 to 9 on the SAM of MPA. Similarly, the k(et) of cyt c adsorbed on the mixed SAMs of MES/MEL sharply decreases from 900 +/- 300 s(-1) to 110 s(-1) as the surface mole fraction of MES increases beyond 0.5, suggesting the presence of a negative surface charge threshold beyond which the rate of ET of cyt c is dramatically lowered. The decrease in the k(et) on the SAMs at high negative charge densities probably results from the confinement of adsorbed cyt c by the strong electrostatic force to an orientation that is not optimal for the ET reaction.     

Understanding the mechanism of short-range electron transfer using an immobilized cupredoxin

The hydrophobic patch of azurin (AZ) from Pseudomonas aeruginosa is an important recognition surface for electron transfer (ET) reactions. The influence of changing the size of this region, by mutating the C-terminal copper-binding loop, on the ET reactivity of AZ adsorbed on gold electrodes modified with alkanethiol self-assembled monolayers (SAMs) has been studied. The distance-dependence of ET kinetics measured by cyclic voltammetry using SAMs of variable chain length, demonstrates that the activation barrier for short-range ET is dominated by the dynamics of molecular rearrangements accompanying ET at the AZ-SAM interface. These include internal electric field-dependent low-amplitude protein motions and the reorganization of interfacial water molecules, but not protein reorientation. Interfacial molecular dynamics also control the kinetics of short-range ET for electrostatically and covalently immobilized cytochrome c. This mechanism therefore may be utilized for short-distance ET irrespective of the type of metal center, the surface electrostatic potential, and the nature of the protein-SAM interaction.     

Redox mediation at 11-mercaptoundecanoic acid self-assembled monolayers on gold

Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and digital simulation techniques were used to investigate quantitatively the mechanism of electron transfer (ET) through densely packed and well-ordered self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid on gold, either pristine or modified by physically adsorbed glucose oxidase (GOx). In the presence of ferrocenylmethanol (FcMeOH) as a redox mediator, ET kinetics involving either solution-phase hydrophilic redox probes such as [Fe(CN)6]3-/4- or surface-immobilized GOx is greatly accelerated: [Fe(CN)6]3-/4- undergoes diffusion-controlled ET, while the enzymatic electrochemical conversion of glucose to gluconolactone is efficiently sustained by FcMeOH. Analysis of the results, also including the digital simulation of CV and EIS data, showed the prevalence of an ET mechanism according to the so-called membrane model that comprises the permeation of the redox mediator within the SAM and the intermolecular ET to the redox probe located outside the monolayer. The analysis of the catalytic current generated at the GOx/SAM electrode in the presence of glucose and FcMeOH allowed the high surface protein coverage suggested by X-ray photoelectron spectroscopy (XPS) measurements to be confirmed.     

Effects of mutational (Lys to Ala) surface charge changes on the redox properties of electrode-immobilized cytochrome c

Untrimethylated yeast iso-1-cytochrome c (cytc) and its single and multiple Lys to Ala variants at the surface lysines 72, 73, and 79 were adsorbed on carboxyalkanethiol self-assembled monolayers (SAMs) on gold, and the thermodynamics and kinetics of the heterogeneous protein-electrode electron-transfer (ET) reaction were determined by voltammetry. The reaction thermodynamics were also measured for the same species freely diffusing in solution. The selected lysine residues surround the heme group and contribute to the positively charged domain of cytc involved in the binding to redox partners and to carboxyl-terminated SAM-coated surfaces. The E degrees' (standard reduction potential) values for the proteins immobilized on SAMs made of 11-mercapto-1-undecanoic acid and 11-mercapto-1-undecanol on gold were found to be lower than those for the corresponding diffusing species owing to the stabilization of the ferric state by the negatively charged SAM. For the immobilized proteins, Lys to Ala substitution(s) do not affect the surface coverage, but induce significant changes in the E degrees' values, which do not simply follow the Coulomb law. The results suggest that the species-dependent orientation of the protein (and thereby of the heme group) toward the negatively charged SAM influences the electrostatic interaction and the resulting E degree' change. Moreover, these charge suppressions moderately affect the kinetics of the heterogeneous ET acting on the reorganization energy and the donor-acceptor distance. The kinetic data suggest that none of the studied lysines belong to the interfacial ET pathway.     

Self-assembled monolayers of alkanethiols on gold prepared in a hexagonal lyotropic liquid crystalline phase of Triton X-100/water system

In this paper, we have reported a new method of preparing self-assembled monolayers (SAMs) of decanethiol and hexadecanethiol on gold surface by using a lyotropic liquid crystalline phase as an adsorbing medium. The stability and blocking ability of these SAMs were characterized using grazing angle Fourier transform infrared (FTIR) spectroscopy and electrochemical techniques such as cyclic voltammetry and electrochemical impedance spectroscopy. The lyotropic liquid crystalline medium possesses a hexagonal structure consisting of a nonionic surfactant Triton X-100, water, and the corresponding thiol, which provides a highly hydrophobic environment to solubilize the alkanethiols and later to facilitate their delivery to the gold surface. We find that the SAMs formed from the hexagonal liquid crystalline phase are highly compact and have excellent electrochemical blocking ability towards the redox probes compared to conventional SAMs prepared from commonly used organic solvents such as ethanol. From the impedance studies, we have determined the capacitance of the monolayer-coated electrodes and the surface coverage of the SAM, which has been found to be >99.98% on gold surface. We have also estimated the extent of ionic permeability through the film and measured the rate constants for the redox reactions on the SAM-modified electrodes. Our results show that the rate constants of [Fe(CN)6](3-/4-) and [Ru(NH3)6](2+/3+) redox couples are very much lower in the case of monolayers prepared in liquid crystalline phase compared to the SAM formed in 1 mM thiol in ethanol solution, suggesting a better blocking ability of the SAMs in the former case. From the grazing angle FTIR spectroscopic studies and capacitance measurements, we have ruled out any coadsorption of surfactant molecules on the Au surface. These results suggest that SAMs of very low defect density and extremely low ionic permeability can be obtained when a hexagonal lyotropic liquid crystalline phase is used as an adsorbing medium.     

Scanning electrochemical microscopy. 59. Effect of defects and structure on electron transfer through self-assembled monolayers

Electron transfer (ET) rate kinetics through n-alkanethiol self-assembled monolayers (SAMs) of alkanethiols of different chain lengths [Me(CH2)nSH; n=8, 10, 11, 15] on Au and Hg surfaces and ferrocene (Fc)-terminated SAMs (poly-norbornylogous and HS(CH2)12CONHCH2Fc) on Au were studied using cyclic voltammetry and scanning electrochemical microscopy (SECM). The SECM results allow determination of the ET kinetics of solution-phase Ru(NH3)63+/2+ through the alkanethiol SAMs on Au and Hg. A model using the potential dependence of the measured rate constants is proposed to compensate for the pinhole contribution. Extrapolated values of koML for Ru(NH3)63+/2+ using the model follow the expected exponential decay (beta is 0.9) for different chain lengths. For a Fc-terminated poly-norbornyl SAM, the standard rate constant of direct tunneling (ko is 189+/-31 s(-1)) is in the same order as the ko value of HS(CH2)12CONHCH2Fc. In blocking and Fc SAMs, the rates of ET are demonstrated to follow Butler-Volmer kinetics with transfer coefficients alpha of 0.5. Lower values of alpha are treated as a result of the pinhole contribution. The normalized rates of ET are 3 orders of magnitude higher for Fc-terminated than for blocking monolayers. Scanning electron microscopy imaging of Pd nanoparticles electrochemically deposited in pinholes of blocking SAMs was used to confirm the presence of pinholes.     

金表面不同链长烷基硫醇自组装单分子膜表面电势的变化规律

从Helmholtz模型出发,对生长在金表面不同链长烷基硫醇自组装单分子膜(SAM)表面电势的变化规律进行了理论研究.利用量子化学软件Gaussian03和MOPAC,讨论了分子偶极矩、相对介电常数以及分子的倾斜角对SAM表面电势的影响.研究表明,不同链长烷基硫醇SAM中分子的倾斜角随烷基链长度的规律性变化是引起SAM表面电势变化的主要原因.从SAM形成机制出发,对金表面不同链长烷基硫醇SAM表面电势的变化规律及其成因提出了新的解释.     

Reorganization of immobilized horse and yeast cytochrome c induced by pH changes or nitric oxide binding

The redox properties of horse and yeast cytochrome c electrostatically immobilized on carboxylic acid-terminated self-assembled monolayers (SAMs) have been determined over a broad pH range (pH 3.5-8) in the absence and presence of nitric oxide. Below pH 6, both proteins exhibit comparable midpoint potentials, coverages, and electron-transfer rate constants, which suggests that they are adsorbed on the SAM in a similar fashion. Above pH 6, a sharp decrease in electron-transfer rate constants is observed for immobilized yeast cytochrome c, which is indicative of a change in the electron tunneling pathway between the heme and the electrode and hence suggests that the protein reorients on the surface. Such a decrease is not observed for horse cytochrome c and therefore must be related to the specific charge distribution on yeast cytochrome c. Apart from the charge distribution on the protein, the reorientation also seems to be related to the charge on the SAM surface. The presence of nitric oxide causes a decrease in electron-transfer rate constants of both yeast and horse cytochrome c at low pH. This is probably due to the fact that nitric oxide induces a conformational change of the protein and also changes the reorganization energy for electron transfer.     

Thermal characterization of self-assembled monolayers of dialkyl disulfides containing the urea moiety

Thermal behaviors of urea-containing dialkyl disulfides 4-(3-octadecylureido)phenyl disulfide (ODPD) and 3-(octadecylureido)ethane disulfide (ODED) and octadecyl disulfide (ODDS) self-assembled monolayers (SAMs) were investigated by infrared reflection-absorption spectroscopy (IRRAS). Among the SAMs, the alkyl chain of ODPD is thermally reversible in the temperature region between 30 and 138 degrees C, whereas alkyl chains of ODED and ODDS are irreversible. With regard to the thermal stability of alkyl chains, ODED is superior to ODPD and ODDS. It is considered that the good thermal reversibility of the ODPD SAM is due to the rigid phenyl ring and the good thermal stability of the ODED SAM is due to the flexible ethylene linker. Moreover, 2D correlation analysis provides an enhancement of spectral resolution in amide II and CH2 antisymmetric stretching bands and suggests from the comparison of sequences of spectral events of ODPD and ODED SAMs that the last reorientation of the phenyl ring in the ODPD SAM is responsible for the good thermal reversibility.     

Factors that determine the protein resistance of oligoether self-assembled monolayers --internal hydrophilicity,terminal hydrophilicity,and lateral packing density

Protein resistance of oligoether self-assembled monolayers (SAMs) on gold and silver surfaces has been investigated systematically to elucidate structural factors that determine whether a SAM will be able to resist protein adsorption. Oligo(ethylene glycol) (OEG)-, oligo(propylene glycol)-, and oligo(trimethylene glycol)-terminated alkanethiols with different chain lengths and alkyl termination were synthesized as monolayer constituents. The packing density and chemical composition of the SAMs were examined by XPS spectroscopy; the terminal hydrophilicity was characterized by contact angle measurements. IRRAS spectroscopy gave information about the chain conformation of specific monolayers; the amount of adsorbed protein as compared to alkanethiol monolayers was determined by ellipsometry. We found several factors that in combination or by themselves suppress the protein resistance of oligoether monolayers. Monolayers with a hydrophobic interior, such as those containing oligo(propylene glycol), show no protein resistance. The lateral compression of oligo(ethylene glycol) monolayers on silver generates more highly ordered monolayers and may cause decreased protein resistance, but does not necessarily lead to an all-trans chain conformation of the OEG moieties. Water contact angles higher than 70 degrees on gold or 65 degrees on silver reduce full protein resistance. We conclude that both internal and terminal hydrophilicity favor the protein resistance of an oligoether monolayer. It is suggested that the penetration of water molecules in the interior of the SAM is a necessary prerequisite for protein resistance. We discuss and summarize the various factors which are critical for the functionality of "inert" organic films.     

Self-assembled monolayers (SAMs) of alkoxycyanobiphenyl thiols on gold--a study of electron transfer reaction using cyclic voltammetry and electrochemical impedance spectroscopy

Self-assembled monolayers (SAMs) of liquid crystalline thiol-terminated alkoxycyanobiphenyl molecules with different alkyl chain lengths on Au surface have been studied for the first time using electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The barrier property of the SAM-modified surfaces was evaluated using two different redox probes, namely potassium ferro/ferri cyanide and hexaammineruthenium(III) chloride. It was found that for short-length alkyl chain thiol (C5) the electron transfer reaction of hexaammineruthenium(III) chloride takes place through tunneling mechanism. In contrast, redox reaction of potassium ferro/ferri cyanide is almost completely blocked by the SAM-modified Au surface. From the impedance data, a surface coverage value of >99.9% was calculated for all the thiol molecules.     

Influence of alkyl chain length on phosphate self-assembled monolayers

A series of alkyl phosphates with alkyl chain lengths ranging from C10 to C18 have been synthesized. Self-assembled monolayers (SAMs) of these molecules were prepared on titanium oxide surfaces by immersion of the substrates in alkyl phosphate solutions of 0.5 mM concentration in n-heptane/isopropanol. The SAMs were characterized by means of dynamic water contact angle (dCA) measurements, variable-angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). A higher degree of order and packing density within the monolayers was found for alkyl phosphates with alkyl chain lengths exceeding 15 carbon atoms. This is reflected in a lower dCA hysteresis, as well as a film thickness measured by VASE and XPS close to the expected values for SAMs with an average alkyl chain tilt angle of 30 degrees to the surface normal. Additionally a shift of the symmetric and antisymmetric C-H stretching modes in the PM-IRRAS spectra to lower wave numbers was observed. These findings imply a higher two-dimensional crystallinity of the films derived from alkyl phosphates with a longer alkyl chain length.     

Heterogeneous electron transfer at Au/SAM junctions in a room-temperature ionic liquid under pressure

Proven electrochemical approaches were applied to study heterogeneous electron transfer (ET) between selected redox couples and gold electrodes modified with alkanethiol self-assembled monolayers (SAMs), using the room-temperature ionic liquid (RTIL) [bmim][NTf2] as reaction medium; ferrocene as freely diffusing redox probe in the RTIL was tested for ET through both thin (butanethiol) and thick (dodecanethiol) assemblages at pressures up to 150 MPa; well behaved kinetic patterns and reproducibility of data were demonstrated for ET within the unique Au/SAM/RTIL arrays.     

Stability of self-assembled monolayers on titanium and gold

Methyl- and hydroxyl-terminated phosphonic acid self-assembled monolayers (SAMs) were coated on Ti from aqueous solution. Dodecyl phosphate and dodecyltrichlorosilane SAMs were also coated on Ti using solution-phase deposition. The stability of SAMs on Ti was investigated in Tris-buffered saline (TBS) at 37 degrees C using X-ray photoelectron spectroscopy, contact angle goniometry, and atomic force microscopy. For comparison purposes, a hydroxyl-terminated thiol SAM was coated on Au, and its stability was also investigated under similar conditions. In TBS, a significant proportion of phosphonic acid or phosphate molecules were desorbed from the Ti surface within 1 day, while the trichlorosilane SAM on Ti or thiol SAM on Au was stable for up to 7 days under similar conditions. The stability of hydroxyl-terminated phosphonic acid SAM coated Ti and thiol SAM coated Au was investigated in ambient air and ultraviolet (UV) light. In ambient air, the phosphonic acid SAM on Ti was stable for up to 14 days, while the thiol SAM on Au was not stable for 1 day. Under UV-radiation exposure, the alkyl chains of the phosphonic acid SAM were decomposed, leaving only the phosphonate groups on the Ti surface after 12 h. Under similar conditions, decomposition of alkyl chains of the thiol SAM was observed on the Au surface accompanied by oxidation of thiolates.     

Prediction of standard interfacial electron-transfer rate constants for the Ru(NH3)6(3+/2+) couple through omega-hydroxyalkanethiol self-assembled monolayers on gold electrodes

Two relatively simple approaches are developed and used to calculate (predict) the standard interfacial electron-transfer (ET) rate constants (k degrees) of the Ru(NH3)6(3+/2+) couple dissolved in aqueous electrolyte solutions in contact with Au electrodes coated with self-assembled monolayers (SAMs) composed of HS(CH2)nOH as functions of both n and temperature. These approaches are suggested by the conclusion reached by Smalley et al. (J. Electroanal. Chem. 2006, 589, 1-6) that the interfacial ET rate of a solution-dissolved redox couple in contact with a SAM is, within 1 order of magnitude, the same as the (normalized) interfacial ET rate of a similar attached (as a constituent of a similar SAM) couple. The calculations, therefore, employ the measured electronic coupling of the attached (to Au electrodes through alkanethiolate bridges) -PyRu(NH3)5(3+/2+) couple. The two approaches also both include dynamic solvent effects on the ET kinetics and the influence of electronic coupling on the activation barrier for the ET reaction. At T=298 K and n=3, 11, and 14, the predicted rate constants are in very good agreement with the existing measurements of k degrees. However, for n<3 at 298 K, the predicted rate constants are extremely large (i.e., >4.5 cm s(-1)) and do not tend toward a limiting value. Additionally, even if the electronic coupling between a Au electrode and a Ru(NH3)6(3+/2+) moiety located at the surface of the SAM is >0.1 eV, the calculated standard rate constant is not directly proportional to the inverse of the longitudinal dielectric time of the solvent. A primary reason for both the absence of a limiting value for the predicted k degrees's at 298 K and the attenuated influence of dynamic solvent effects is the activation energy barrier suppression caused by large values of the electronic coupling.