Kinetic determination of morphine by means of Bray-Liebhafsky oscillatory reaction system using analyte pulse perturbation technique

A novel kinetic method for micro-quantitative determinations of morphine (MH) is proposed and validated. The method is based on the potentiometric monitoring of the concentration perturbations of the oscillatory reaction system being in a stable non-equilibrium stationary state close to the bifurcation point between stable and oscillatory state. The response of the Bray-Liebhafsky (BL) oscillatory reaction as a matrix system, to the perturbations by different concentrations of morphine, is followed by a Pt-electrode. The proposed method relies on the linear relationship between maximal potential shift, ΔE_m, and the logarithm of the added morphine amounts in the range of 0.004-0.18 μmol. Under optimum conditions, the sensitivity of the proposed method (as the limit of detection) is 0.001 μmol and the method is featured by good precision (R.S.D. = 1.6%) as well as the excellent sample throughput (45 samples h⁻¹). In addition to standard solution analysis, this approach was successfully applied for quantitative determination of morphine in a typical pharmaceutical dosage form. Some aspects of the possible mechanism of morphine action on the BL oscillating chemical system are discussed in detail.     

Simple LC Method with Chemiluminescence Detection for Simultaneous Determination of Arbutin and l-Ascorbic Acid in Whitening Cosmetics

Simultaneous determination of arbutin (ART) and l-ascorbic acid (AA) by HPLC with chemiluminescence detection is proposed for the first time. This method is based on the CL reaction of acidic potassium permanganate with ART and AA in the presence of formaldehyde as enhancer. The separation was performed on a C₁₈ column with a 90:10 (v/v) mixture of 0.02 M phosphate buffer and methanol as mobile phase. The effects of several conditions on HPLC resolution and CL emission were studied systematically. The linear ranges were 0.5–50 and 1–200 μg mL⁻¹ for ART and AA, respectively. The detection limits were 0.2 and 0.3 μg mL⁻¹, respectively. The method was successfully applied to the determination of ART and AA in whitening cosmetics.     

A novel kinetic-spectrophotometric method for determination of nitrites in water

A simple, selective and sensitive kinetic method for the determination of nitrite in water was developed. The method is based on the catalytic effect of nitrite on the oxidation of methylene blue (MB) with bromate in a sulfuric acid medium. During the oxidation process, absorbance of the reaction mixture decreases with the increasing time, inversely proportional to the nitrite concentration. The reaction rate was monitored spectrophotometrically at λ = 666 nm within 30 s of mixing. Linear calibration graph was obtained in the range of 0.005–0.5 μg mL⁻¹ with a relative standard deviation of 2.09 % for six measurements at 0.5 μg mL⁻¹. The detection limit was found to be 0.0015 μg mL⁻¹. The effect of different factors such as acidity, time, bromate concentration, MB concentration, ionic strength, and order of reactants additions is reported. Interference of the most common foreign ions was also investigated. The optimum experimental conditions were: 0.38 mol L⁻¹ H₂SO₄, 5 × 10.4 mol L⁻¹ KBrO₃, 1.25 × 10.5 mol L⁻¹ MB, 0.3 mol L⁻¹ sodium nitrate, and 25°C. The proposed method was conveniently applied for the determination of nitrite in spiked drinking water samples.     

Fluorimetric determination of ascorbic acid in vitamin C tablets using methylene blue

In this study, a simple and sensitive fluorimetric method was described for the determination of Ascorbic Acid (AA). The procedure is based on the reaction between AA and Methylene Blue (MB). The fluorescence intensity of MB was measured at excitation and emission of 664 and 682 nm, respectively. MB concentration was decreased as a function of decreasing fluorescence intensity due to forming colorless form of MB (Leuco-MB) in the reaction between AA and MB. A linear relationship was obtained between the decreasing fluorescence intensity and the concentration of AA in the range of 3.0 x 10(-7)-6.0 x 10(-6) mol.l(-1). The detection limit was 2.5 x 10(-7) mol.l(-1). The proposed method was applied successfully for the determination of AA in Vitamin C tablets.     

Cholinesterase inhibition based determination of pancuronium bromide in biological samples

Pancuronium bromide (PCBr) inhibition effect on enzyme cholinesterase from pooled human serum (Che, EC 3.1.1.8 acylcholine acylhydrolase) was used for development of a spectrophotometric kinetic method for PCBr determination in human serum and urine. Optimal conditions for the basic and inhibitor reactions were established: pH=7.7 and substrate concentration c(benzoylcholine chloride)=1.33 mmol/L. Kinetic parameters were also determined: Michaelis-Menten’s constant K_M=0.40 mmol/L, maximal reaction rate V_max=52.2 μmol/L min, inhibition constant K_i=0,56 μmol/L and IC₅₀=1.31 μmol/L. Linear dependence between the reaction rate and inhibitor concentration exists in PCBr concentration range 8.20–68.25 nmol/L, which corresponds to the real sample concentrations from 0.328 to 2.730 μmol/L. The method detection and quantification limits were 2.01 nmol/L and 6.67 nmol/L, respectively. Precision of the method was tested for three pancuronium concentrations (10.70, 29.35 and 51.25 nmol/L). Relative standard deviation (RSD) was in the range 0.15–7.45%. Accuracy was examined by standard addition method. Influence of the substances usually present in serum and urine on the reaction rate was tested. The developed method was applied for PCBr content determination in serum model samples, urine model samples and in urine taken during surgery. The method has good sensitivity, accuracy, precision and it is suitable for clinical practice.      

Flow injection atomic absorption spectrometric determination of iodide using an on-line preconcentration technique

A continuous flow atomic absorption spectrometric system was used to develop an efficient on-line preconcentration-elution procedure for the determination of iodide traces. Chromium (VI) is introduced into the flow system and is reduced to chromium (III) in acid medium proportionally to the iodide present in the sample. The Cr(III) reduced by iodide is retained on a minicolumn packed with a poly(aminophosphonic acid) chelating resin, while unreduced Cr(VI) is not retained. Reduced Cr(III) is preconcentrated by passing the sample containing iodide through the system during 3 min, and is then eluted with 0.5 mol L^–1 hydrochloric acid and determined by flame atomic absorption spectrometry (FAAS). The detection limit (3σ) obtained is 2.5 μg L^–1. Other ions typically present in waters do not interfere. The proposed method allows the determination of iodide in the range 6–220 μg L^–1 with a relative standard deviation of 2.7% at a rate of 17 samples h^–1. The method has been applied to the determination of iodide in tap and sea waters. Received: 16 September 1999 / Revised: 15 November 1999 / Accepted: 19 November 1999     

Selective spectrophotometric determination of paracetamol with sodium nitroprusside in pharmaceutical and biological samples

A novel simple method to determine paracetamol with good selectivity has been established by using sodium nitroprusside as the chromogenic reagent. The experiment indicates that sodium nitroprusside can react with paracetamol in a basic solution to form a product with colored O-nitrosamines. The maximal absorption wavelength (λ_max) and the apparent molar absorption coefficient of the product are 700 nm and 3.4 × 10³ L/mol cm, respectively. A Good linear relationship is obtained between the absorbance and the concentration of paracetamol in a wide range of 0.19–96 μg/mL. The linear regression equation is A = 0.01695 + 0.02240C (μg/mL), with a correlation coefficient of 0.9993. The detection limit (3σ/κ) is 0.10 μg/mL, and the relative standard deviation (RSD) is 0.90% (n = 11). The parameters with regard to determination are optimized, and the reaction mechanism is discussed. The method has been successfully applied to the selective determination of paracetamol in pharmaceutical and biological samples.     

Sequential Injection Kinetic Flow Assay for Monitoring Glycerol in a Sugar Fermentation Process by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A sequential injection system to monitor glycerol in a Saccharomyces cerevisiae fermentation process was developed. The method relies on the rate of formation of nicotinamide adenine dinucleotide in its reduced form (NADH, measured spectrophotometrically at 340 nm) from the reaction of glycerol with NAD⁺ cofactor, catalysed by the enzyme glycerol dehydrogenase present in solution. This procedure enables the determination of glycerol between 0.046 and 0.46 g/l, (corresponding to yeast fermentation samples with concentrations up to 50 g/l) with good repeatability (relative standard deviation for n = 10 lower than 2.2% for three different samples) at a sampling frequency of 25/h. The detection and quantification limits using a miniaturised spectrophotometer were 0.13 and 0.44 mM, respectively. Reagent consumption was of 0.45 μmol NAD⁺ and 1.8 μg enzyme per assay, and the waste production was 2.8 ml per determination. Results obtained for samples were in agreement with those obtained with a high-performance liquid chromatography method.     

Simultaneous determination of formaldehyde and methanol by flow-injection catalytic spectrophotometry

A flow-injection method is proposed for the simultaneous catalytic determination of formaldehyde and methanol on the basis of the catalytic action of formaldehyde upon the redox reaction between crystal violet and potassium bromate in a phosphoric acid medium and on-line oxidization of methanol into formaldehyde using a lead dioxide solid-phase reactor. The indicator reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of crystal violet at the maximum absorption wavelength of 610 nm. A technique based on three sampling loops with a single injection valve is developed. The flow-injection system produces a signal of main peak with two shoulders of the same height. The height of the shoulders corresponds to the formaldehyde concentration, and the height difference between the shoulders and the main peak corresponds to the methanol concentration. The detection limit is 0.1 μg/mL for formaldehyde and 1.0 μg/mL for methanol with the sampling rate of 10 samples per hour. The relative standard deviations for 11 replicate determinations of formaldehyde (1.0 μg/mL) and methanol (10 μg/mL) are 1.1 and 2.1%, respectively. The method has been successfully applied to the simultaneous determination of formaldehyde and methanol in some gas samples. The text was submitted by the authors in English.     

Novel spectrophotometric method for determination of cinacalcet hydrochloride in its tablets via derivatization with 1,2-naphthoquinone-4-sulphonate

This study represents the first report on the development of a novel spectrophotometric method for determination of cinacalcet hydrochloride (CIN) in its tablet dosage forms. Studies were carried out to investigate the reaction between CIN and 1,2-naphthoquinone-4-sulphonate (NQS) reagent. In alkaline medium (pH 8.5), an orange red-colored product exhibiting maximum absorption peak (λ _max) at 490 nm was produced. The stoichiometry and kinetic of the reaction were investigated and the reaction mechanism was postulated. This color-developing reaction was employed in the development of a simple and rapid visible-spectrophotometric method for determination of CIN in its tablets. Under the optimized reaction conditions, Beer's law correlating the absorbance with CIN concentration was obeyed in the range of 3 - 100 μg/ml with good correlation coefficient (0.9993). The molar absorptivity (ε) was 4.2 × 10⁵ l/mol/cm. The limits of detection and quantification were 1.9 and 5.7 μg/ml, respectively. The precision of the method was satisfactory; the values of relative standard deviations (RSD) did not exceed 2%. No interference was observed from the excipients that are present in the tablets. The proposed method was applied successfully for the determination of CIN in its pharmaceutical tablets with good accuracy and precisions; the label claim percentage was 100.80 - 102.23 ± 1.27 - 1.62%. The results were compared favorably with those of a reference pre-validated method. The method is practical and valuable in terms of its routine application in quality control laboratories.     

Sequential injection technique for the determination of chlorpromazine hydrochloride in pure form and pharmaceutical formulations

A simple, economical, and automated spectrophotometric method for the determination of chlorpromazine hydrochloride by sequential injection analysis using ammonium metavanadate as colorimetric reagent is proposed. The various chemical and physical conditions that affected the reaction have been thoroughly investigated. The calibration curve was linear within the range 10–100 μg/mL. The detection limit (S/N = 3) was 0.7 μg/mL and the limit of quantification (S/N = 10) was 2.3 μg/mL. The sampling frequency was 22 h⁻¹. The method has been used for the determination of chlorpromazine hydrochloride in pure form and pharmaceutical formulations. The t-test has revealed that there is no evidence of significant differences between the obtained results at the 95% confidence level. The method can be applied to the quantitative determination of chlorpromazine hydrochloride. It is also applicable in the quality control of chlorpromazine hydrochloride preparations. The text was submitted by the authors in English.     

Time-resolved chemiluminescent analysis of hydralazine in pharmaceuticals

A new analytical method is proposed for determination of hydralazine (HZ) in pharmaceuticals—measurement of the chemiluminescence (CL) emitted after reaction with phosphoric-acidified KMnO₄. The novelty of this method is the recording of the whole CL–time profile. Such a recording is possible by use of a CL-detector operating in tandem which enables the reactants to be mixed in the measurement cell only and, therefore, the CL is reaction monitored from beginning. At the precise time the pump is stopped signal recording is triggered and so CL evolution is recorded completely. The optimum chemical conditions for the determination were 0.8 mol L⁻¹ formaldehyde, 0.3 mmol L⁻¹ KMnO₄, 4.0 mol L⁻¹ H₃PO₄, and a total flow of 0.37 mL s⁻¹. Two calibration graphs were plotted, CL intensity and area under the profile curve against HZ concentration. Exhaustive statistical analysis provided very interesting results, for example, accordance with Clayton’s theory, detection limit below 0.2 μg mL⁻¹, and linear calibration ranges from 0.2 to 5.0 μg mL⁻¹. This method was successfully applied to the determination of HZ in pharmaceuticals. Because they are usually formulated in association with diuretics and β-blockers, the method was used for analysis of HZ in pharmaceuticals that contained either HZ only or HZ with other hypotensive substances. Obtained and nominal content were approximately the same and experimental Student t values indicated there were no significant differences between the values.     

Sequential injection technique for determination of phenoxybenzamine hydrochloride and metoclopramide in pharmaceutical formulations

A sequential injection analysis (SIA) system is described for the determination of phenoxybenzamine hydrochloride and metoclopramide using spectrophotometer as detector. The method is based on the detection of an unstable red intermediate compound resulting from the reaction of phenoxybenzamine hydrochloride or metoclopramide with the diazotizating product of p-phenylenediamine with sodium nitrite in hydrochloric acid medium. The sampling frequency is 69 h⁻¹ and 75 h⁻¹ for phenoxybenzamine hydrochloride and metoclopramide, respectively. The linear range is 10–400 μg/mL for phenoxybenzamine hydrochloride with a detection limit of 0.081 μg/mL and 20–250 μg/mL for metoclopramide with a detection limit of 0.034 μg/mL. The RSD is 1.01 and 0.45% for phenoxybenzamine hydrochloride and metoclopramide, respectively. The proposed methods were used to determine phenoxybenzamine hydrochloride and metoclopramide in pharmaceuticals. The results are compared with those obtained by pharmacopoeia method. The article is published in the original.     

Selective detection of dopamine in the presence of ascorbic acid by use of glassy-carbon electrodes modified with both polyaniline film and multi-walled carbon nanotubes with incorporated β-cyclodextrin

A simple, sensitive, and reliable method based on a combination of multi-walled carbon nanotubes with incorporated β-cyclodextrin (β-CD-MWNTs) and a polyaniline (PANI) film-modified glassy-carbon (GC) electrode has been successfully developed for determination of dopamine (DA) in the presence of ascorbic acid (AA). The PANI film had good anti-interference properties and long-term stability, because of the permselective and protective properties of the conducting redox polymer film. The acid-treated MWNTs with carboxylic acid functional groups promoted the electron-transfer reaction of DA and inhibited the voltammetric response of AA. Sensitive detection of DA was further improved by the preconcentration effect of formation of a supramolecular complex between β-CD and DA. The analytical response of the β-CD-MWNTs/PANI film to the electrochemical behavior of DA was, therefore, better than that of a MWNTs/PANI film, a PANI film, or a bare glassy-carbon (GC) electrode. Under the conditions chosen a linear calibration plot was obtained in the range 1.0 × 10⁻⁷–1.0 × 10⁻³ mol L⁻¹ and the detection limit was 1.2 × 10⁻⁸ mol L⁻¹. Interference from AA was effectively eliminated and the sensitivity, selectivity, stability, and reproducibility of the electrodes was excellent for determination of DA.     

Determination of Cu, Zn and Cd in water by FAAS after preconcentration by baker’s yeast (Saccharomyces cerevisiae) immobilized on sepiolite

By using the adsorbent Saccharomyces cerevisiae immobilized on sepiolite an adsorption-elution method was developed for the preconcentration of Cu, Zn, and Cd followed by flame atomic absorption spectrometry (FAAS). Recoveries were 98.3 ± 0.4% for Cu, 94.2 ± 0.3% for Zn, and 99.04 ± 0.04% for Cd at 95% confidence level obtained by the column method. The influence of sea water matrix elements on the separation of the trace elements was also assessed by using the column procedure. The breakthrough capacities were found to be 74 μmol/g for copper, 128 μmol/g for zinc and 97 μmol/g for cadmium. After optimization the proposed method was applied to the trace metal determination in sea and river water. Received: 8 June 1998 / Revised: 8 September 1998 / Accepted: 16 September 1998     

Determination of isoascorbic acid in fish tissue by hydrophilic interaction liquid chromatography–ultraviolet detection

A new hydrophilic interaction liquid chromatographic (HILIC) method for the simultaneous determination of isoascorbic (IAA) and ascorbic acid (AA) was developed. The separation of IAA and AA was studied in various HILIC stationary phases and the influence of the composition of the mobile phase, the ionic strength and the column temperature to the chromatographic characteristics is presented. The final method used an aminopropyl column under isocratic elution with acetonitrile–100 mM ammonium acetate solution (90:10, v/v) at a flow rate of 0.4 mL/min and a detection wavelength of 240 nm. This method was validated and the calibration curves were found to be linear in the range of 1.0–65 μg/mL for both IAA and AA. The method limit of detection for IAA determination in fish tissue was 2.3 μg/g. Inter-day precision (as %RSD_R) was ranged between 0.56% and 8.3% at three concentration levels, whereas the respected recoveries ranged between 82% and 98%. This method was applied to the determination of IAA (as additive E315) in frozen redfish samples. The hyphenation of the HILIC separation with a tandem mass spectrometer was also studied and the problems encountered with negative electrospray ionization under HILIC separation conditions are discussed.     

Spectrophotometric determination of methimazole in pharmaceutical,serum and urine samples by reaction with potassium ferricyanide-Fe(III)

This paper describes a novel method to determine methimazole by spectrophotometry using a potassium ferricyanide-Fe(III) reaction. The study indicates that at pH 4.0 Fe(III) is reduced to Fe(II) by methimazole and in situ formed Fe(II) reacts with potassium ferricyanide to give soluble Prussian Blue which is characterized by means of XRD analysis. The absorbance of Prussian Blue is measured at the absorption maximum of 735 nm, and the amount of methimazole can be determined based on this absorbance. Beer’s law is obeyed in the range of methimazole concentrations of 0.02–6.00 μg/mL. The equation of the linear regression is A = −0.0058 + 0.49988c (μg/mL), with a correlation coefficient of 0.9998 and RSD of 0.80%. The detection limit (3σ/k) is 0.015 μg/mL, and the apparent molar absorption coefficient of indirect determination of methimazole is 5.7 ± 10⁴ L/mol cm. This method has been successfully applied to the determination of methimazole in pharmaceutical, serum and urine samples, and average recoveries are in the range of 98.6–102.4%. Analytical results obtained with this novel method are satisfactory.     

Chemiluminescence system of Ce(IV)-RhB-bismerthiazol

A novel chemiluminescence system for the determination of bismerthiazol is first described in this paper. It is based on the chemiluminescence reaction of bismerthiazol and Ce(IV) in nitric acid solution. The emission intensity could be enhanced greatly by Rhodamine B. The chemiluminescence intensity was proportional to bismerthiazol concentration over the range 30–1000 μg/L. The detection limit was 12 μg/L (3σ) and the relative standard deviation is 2.4% for 500 μg/L of bismerthiazol (n = 11). The proposed method was successfully applied to the determination of bismerthiazol in water and in rice. The recovery was 96.4%–104.1%. __________ Translated from Chinese Journal of Applied Chemistry, 2007, 24(5): 593–595     

Utility of Certain σ and π-Acceptors for the Spectrophotometric Determination of Sildenafil Citrate (Viagra)

 The molecular interaction between sildenafil citrate as electron donor and each of iodine; 7,7,8,8-tetracyanoquinodimethane (TCNQ); 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ); tetracyanoethylene (TCNE); 2,4,7-trinitro-9-fluorenon (TNF); chloranilic acid (CLA); chloranil (CL) and bromanil (BL) as acceptors have been investigated spectrophotometrically. Different variables affecting the reaction were studied and optimized. Beer’s law was obeyed in a concentration limit of 10–260 μg/mL for sildenafil citrate. For more accurate analysis, Ringbom optimum concentration range was found to be between 20–240 μg/mL. The limits of detection and determination were calculated and found to be 1.5 and 5.2 μg/mL, respectively. The standard deviations were calculated for different concentrations of sildenafil citrate using various acceptors. A Job’s plot of the absorbance versus the molar ratio of the sildenafil citrate to each of acceptors under consideration indicated (1:1) ratio. The proposed methods were found to be rapid, accurate, precise and sensitive and could be applied for determination of sildenafil citrate in pharmaceutical dosage forms (Viagra) without interferences from common additives encountered. Received August 30, 2000. Revision January 5, 2001.     

The Influencing Mechanism of Acidity on the Oxidation Peak Currents of Uric Acid and Ascorbic Acid at the PACPE by Cyclic Voltammetry

In this paper, a pre‐anodized carbon paste electrode (PACPE) is fabricated by a simple electrochemical pretreatment method, which can be used for the simultaneous determination of uric acid (UA) and ascorbic acid (AA). The influencing mechanism of the acidity on the size of oxidation peak current (i_p,a) of UA and AA is discussed in detail. According to the results, in different pH conditions, the intensity of hydrogen bonding between UA, AA and the surface of PACPE, the degree of reduction reaction at the auxiliary electrode, and the structural configurations of UA and AA with different species in reaction system have evident influence on the size of oxidation peak current. In pH 7.00 phosphate buffer solution, the calibration curves for UA and AA are obtained in the range of 5.0 x 10^‐7–5.0 x 10^‐5 mol/L and 3.0 x 10^‐5–5.0 x 10^‐3 mol/L, respectively. The detection limits for UA and AA are found to be 2.0 x 10^‐8 mol/L and 1.2 x 10^‐6 mol/L, respectively. This proposed method has been successfully applied to determine UA and AA in human urine simultaneously with satisfactory results.