Electronic control of chemistry and catalysis at the surface of an individual tin oxide nanowire

Tin oxide single nanowires configured as field effect transistors were shown to be operable and tunable alternately as gas sensors or as catalysts under a gaseous atmosphere that simulated realistic ambient conditions. The unusually large surface-to-volume ratio available with nanowires causes adsorption or desorption of donor or acceptor molecules on the nanowire's surface to greatly alter its bulk electron density at relatively small values of the gate voltage. This process can be sensitively monitored as changes in the nanowire's conductivity. The potentially radical change in carrier density can lead to significant changes in the nanowire's sensitivity as a sensor or reciprocally as a catalyst in reactions that involve charge exchange across the nanowire's surface. This leads to the prospect of tuning catalysis or other surface reactions entirely through electronic means.     

Synthesis and characterization of a new magnetic bromochromate hybrid nanomaterial with triethylamine surface modified iron oxide nanoparticles

We describe a novel method for the synthesis a new magnetic bromochromate hybrid nanomaterial, Fe3O4@SiO2@TEA@[CrO3Br], as a catalyst. The physical properties, morphology and magnetic investigations of magnetic bromochromate hybrid nanomaterials are identified by transmission electron microscopy （TEM）, scanning electron microscopy （SEM） and vibrating sample magnetometer （VSM） techniques. Fourier transform infrared （FT-IR）, elemental analysis, X-ray fluorescence （XRF）, X-ray diffraction （XRD） were also used for structural identification. The quantity of chromium is approximately 0.38%, which confirms to the immobilization amount of [CrO3Br]- and is equal to 0.007 mol/100 g.     

Reactivity of nanoparticles; interaction between zinc and copper oxide nanoparticles and iron ions in an alkaline medium

The reactivity of zinc and copper oxide nanoparticles was investigated upon their interaction with iron oxides. It was ascertained that, depending on the reaction conditions, nanoparticles of zinc and copper ferrites (ZnFe₂O₄ and CuFe₂O₄) or core/shell nanoparticles (Fe₃O₄/ZnO) are produced. Size, composition, and structure of the resulting nanoparticles were determined by transmission electron microscopy and X-ray diffraction analysis. The average size of zinc and copper ferrite nanoparticles was ascertained to be 9–10 and 2–3 nm, respectively. For core/shell Fe₃O₄/ZnO nanoparticles, the average size is 20 nm. It was experimentally proved that the photoluminescence radiative characteristics of ZnO nanoparticles are retained in core/shell Fe₃O₄/ZnO nanoparticles.     

Green and one‐pot surface coating of iron oxide magnetic nanoparticles with natural amino acids and biocompatibility investigation

We report the synthesis of iron oxide magnetic nanoparticles (IONPs) coated with various natural amino acids (AAs) using a one‐pot reaction in an aqueous medium. Several AAs, which contained hydrophilic and hydrophobic groups, were selected to study their effects on size, morphology and toxicity of IONPs. Functionalized IONPs were characterized using X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and scanning and transmission electron microscopies. Furthermore, vibrating sample magnetometry analysis shows these nanoparticles have excellent magnetic properties. Cellular toxicity of IONPs was also investigated on HFF2 cell lines. The AA‐coated IONPs are non‐toxic and biocompatible. Natural AA‐coated IONPs show a potential for their development in in vitro and in vivo biomedical fields due to their non‐toxicity, good ζ‐potential and related small size and narrow size distribution.     

Ex-situ dispersion of core-shell nanoparticles of Cu-Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities

Direct dispersion of core-shell nanoparticles on a carbon support (Cu@Pt/C) has been achieved while retaining the essential core-shell features of the nanoparticles by adopting an in situ surface modification-cum-anchoring strategy.     

Isotropic–nematic phase separation and demixing in mixtures of spherical nanoparticles with length‐polydisperse nanorods

An extension of Onsager theory is developed to simulate isotropic–nematic phase separation in a mixture of spheres with length‐polydisperse system of rods. This work is motivated by recent experimental data on nanorod liquid crystals. Prior theoretical investigations indicate that both polydispersity and the presence of spheres should increase the biphasic–nematic phase transition, that is, the nematic cloud point. Results indicate that the phase diagrams undergo drastic changes depending upon both particle geometry and rod length polydispersity. The key geometric factor is the ratio between the sphere diameter and the rod diameter. In general, length fractionation is enhanced by the addition of spheres, which may be experimentally advantageous for separating short nanorods from a polydisperse population. Simulation results also indicate that the nematic cloud and shadow curves may cross one another because of the scarcity of spheres in the shadow phase. In general, these results do indicate that the nematic cloud point increases as a function of sphere loading; however, in certain areas of phase space, this relationship is nonmonotonic such that the nematic cloud point may actually decrease with the addition of spheres. This work has application to a wide range of nanoparticle systems, including mixtures of spherical nanoparticles with nanorods or nanotubes. Additionally, a number of nonspherical particles and structures may behave as spheres, including crumpled graphene and tightly coiled polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Microscale solid phase extraction of glyphosate and aminomethylphosphonic acid in water and guava fruit extract using alumina-coated iron oxide nanoparticles followed by capillary electrophoresis and electrochemiluminescence detection

A microscale solid-phase extraction (SPE) method using alumina-coated iron oxide nanoparticles (Fe₃O₄@Al₂O₃ NPs) as the affinity adsorbent for glyphosate (GLY) and its major metabolite aminomethylphosphonic acid (AMPA) in aqueous solution is reported. One milligram of Fe₃O₄@Al₂O₃ NPs was employed to extract both analytes in 5 ml of aqueous solution. After 5 min extraction, magnetic NPs were isolated from sample solution by employing an external magnet. Followed by rinsing the NPs with 5 μl of 20 mM Na₄P₂O₇ solution for 5 min, the extract was directly analyzed using the derivatization-free CE-electrochemiluminescence (CE-ECL) method. With a sample-to-extract volume ratio of 1000, the enrichment factors for GLY and AMPA were 460 and 64, respectively. The limits of detection (LODs) were 0.3 and 30 ng ml⁻¹ for GLY and AMPA in water, respectively. The developed method was applied to the analysis of GLY in guava fruit. The LOD of GLY in guava was 0.01 μg g⁻¹. Total analysis time including sample pretreatment, SPE and CE-ECL was less than 1 h.     

Hydrophilic/hydrophobic features of TiO2 nanoparticles as a function of crystal phase, surface area and coating, in relation to their potential toxicity in peripheral nervous system

The hydrophilic/hydrophobic properties of a variety of commercial TiO(2) nanoparticles (NP), to be employed as inorganic filters in sunscreen lotions, were investigated both as such (dry powders) and dispersed in aqueous media. Water uptake and the related interaction energy have been determined by means of adsorption microcalorimetry of H(2)O vapor, whereas dispersion features in aqueous solutions were investigated by dynamic light scattering and electrokinetic measurements (zeta potential). The optimized dispersions in cell culture medium were employed to assess the possible in vitro neuro-toxicological effect on dorsal root ganglion (DRG) cells upon exposure to TiO(2)-NP, as a function of crystal phase, surface area and coating. All investigated materials, with the only exception of the uncoated rutile, were found to induce apoptosis on DRG cells; the inorganic/organic surface coating was found not to protect against the TiO(2)-induced apoptosis. The risk profile for DRG cells, which varies for the uncoated samples in the same sequence as the photo-catalytic activity of the different polymorphs: anatase-rutile>anatase>rutile, was found not to be correlated with the surface hydrophilicity of the uncoated/coated specimens. Aggregates/agglomerates hydrodynamic diameter was comprised in the ~200-400 nm range, compatible with the internalization within DRG cells.     

Simple construction of an enzymatic glucose biosensor based on a nanocomposite film prepared in one step from iron oxide, gold nanoparticles, and chitosan

The one-step synthesis is reported of a nanofilm composed of iron oxide and gold nanoparticles in a chitosan matrix that can act as a novel matrix for the immobilization of glucose oxidase (GOx) to fabricate a glucose biosensor. The use for the composite film strongly increased the effective electrode surface for loading of GOx. The size and shape of the iron oxide nanoparticles were examined by transmission electron micrograph. Direct electron transfer and electrocatalysis by GOx was investigated via cyclic voltammetry and chronoamperometry. Under optimized conditions, the biosensor has a response time of 6?s and a linear response in the range between 3???M and 0.57?mM of glucose, with a detection limit of 1.2???M at a signal-to-noise ratio of 3. This novel and disposable mediatorless glucose biosensor may form the basis for a future mass-produced glucose biosensor.

Determination of melamine in food contact materials using an electrode modified with gold nanoparticles and reduced graphene oxide

We describe an electrochemical sensor for melamine based on a glassy carbon electrode (GCE) modified with reduced graphene oxide that was decorated with gold nanoparticles (AuNP/rGO). The AuNPs/rGO nanocomposite was synthesized by co-reduction of Au(III) and graphene oxide and characterized by transmission electron microscopy, Raman spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The response of the modified GCE to melamine was investigated by using hexacyanoferrate as an electrochemical reporter. It is found that the electrochemical response to hexacyanoferrate is increasingly suppressed by increasing concentration of melamine. This is attributed to competitive adsorption of melamine at the AuNP/rGO composite through the interaction between the amino groups of melamine and the AuNPs. The presence of rGO, in turn, provides a platform for a more uniform distribution of the AuNPs and enhances the electron transfer rate of the redox reaction. The findings were used to develop a sensitive method for the determination of melamine. Under optimized conditions, the redox peak current of hexacyanoferrate at a working voltage of 171 mV (vs. SCE) is linearly related to the concentration of melamine in 5.0 to 50 nM range. The method was successfully applied to the determination of melamine in food contact materials.

A simple electrochemical sensor based on gold nanoparticles decorated reduced graphene oxide was developed for highly sensitive measurement of melamine in food contact materials.

     

Unusual micelle and surface adsorption behavior in mixtures of surfactants with an ethylene oxide-propylene oxide triblock copolymer

Micellization and adsorption at the air-solution interface of binary mixtures of the triblock copolymer of ethylene oxide and propylene oxide, EO23PO52EO23 (EPE), and the surfactants sodium dodecyl sulfate (SDS), dodecyl trimethylammonium chloride (DTAC), and tetraethylene glycol monooctyl ether (C8EO4) have been studied by neutron reflectivity and surface tension. The synergistic attractive interaction between the polymer and the ionic surfactants has been analyzed in the framework of the pseudo phase approximation and gives rise to a stronger interaction for EPE/SDS than EPE/DTAC. In contrast, the interaction of the nonionic surfactant C8EO4 with the copolymer EPE shows an unexpected and rather different behavior, resulting in a strongly repulsive interaction, characterized by a positive interaction parameter. The neutron reflectivity measurements of the surface excess, where the predicted and measured surface excesses are directly compared, provide evidence that challenges the applicability of the pseudo phase approximation for describing the surface mixing behavior. Structural information on the mixed adsorbed layer provides evidence which in part explains the observed discrepancies between the measured surface excesses and the behavior predicted from the pseudo phase approximation. Furthermore the structural evidence can be use to rationalize the differences in behavior observed between the ionic and nonionic surfactants.     

Simple method for preparation of porous polyimide film with an ordered surface based on in situ self-assembly of polyamic acid and silica microspheres

In this Article, we addressed a facile method for the fabrication of porous polyimide film with an ordered surface based on the solvent-evaporation-assisted in situ self-assembly of polyamic acid (PAA, precursor of polyimide) and silica microspheres during vacuum-drying of PAA/silica colloid solution. Hydroxyl groups on the surface of silica microspheres have strong hydrogen-bonding with PAA chains, which improve the dispersion of silica microspheres in PAA/DMF solution and further help the self-assembly of PAA/silica colloid solution via solvent evaporation. The approach is simple, neither the preparation of special template nor complex preparation process and precise control over condition is necessary. Furthermore, the method could be employed for mass production of ordered porous polyimide films, and by changing the content and size of silica microspheres, the pore size and porous structure of the porous polyimide films could be tunable. The wettability behavior of the as-prepared porous polyimide films is also studied; the ordered surface topography of the porous polyimide films could change the wettability from hydrophilicity to hydrophobicity.     

Matrix solid‐phase dispersion with chitosan‐zinc oxide nanoparticles combined with flotation‐assisted dispersive liquid–liquid microextraction for the determination of 13 n‐alkanes in soil samples

In this study, chitosan‐zinc oxide nanoparticles were used as a sorbent of miniaturized matrix solid‐phase dispersion combined with flotation‐assisted dispersive liquid–liquid microextraction for the simultaneous determination of 13 n‐alkanes such as C₈H₁₈ and C₂₀H₄₂ in soil samples. The solid samples were directly blended with the chitosan nanoparticles in the solid‐phase dispersion method. The eluent of solid‐phase dispersion was applied as the dispersive solvent for the following flotation‐assisted dispersive liquid–liquid microextraction for further purification and enrichment of the target compounds prior to gas chromatography with flame ionization detection. Under the optimum conditions, good linearity with correlation coefficients in the range 0.9991 < r² < 0.9995 and low detection limits between 0.08 to 2.5 ng/g were achieved. The presented procedure combined the advantages of chitosan‐zinc oxide nanoparticles, solid‐phase dispersion and flotation‐assisted dispersive liquid–liquid microextraction, and could be applied for the determination of n‐alkanes in complicated soil samples with acceptable recoveries.     

Structure-selective dye uptake into an aggregate of a copolymer with linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety in water

Selective uptake of various dyes into an aggregate of amphiphilic copolymer consisting of a hydrophilic linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety has been investigated in water. The copolymer associated into an aggregate with a hydrophobic interior at concentrations above 0.2 mg cm(-3). The uptake (23 and 36 molecules per aggregate, respectively) of pyrene and Oil Yellow in an aggregate was one order higher than that of benzo[a]pyrene and SudanIII. The hydrophobic dyes are always doped in the interior of the aggregate, but the difference in uptake among dyes may depend on their structure. Even if a large number of guest molecules was doped into the interior of an aggregate, the size of the sphere-like aggregate was conserved. It is suggested that guest molecules are encapsulated into the persisting cavity within and between hydrophobic dendron moieties in an aggregate. Structure-selective uptake reported in this investigation is a unique character of an aggregate of copolymer with dendron moiety because the dendron moiety offers a large void for doping.     

How isopolyanions self-assemble and condense into a 2D tungsten oxide crystal: HRTEM imaging of atomic arrangement in an intermediate new hexagonal phase

The structure and structural evolution of tungstic acid solutions, sols and gels are investigated by high-resolution electron microscopy (HRTEM). Acidification of sodium tungstate solutions, through a proton exchange resin, is achieved in a way that ensures homogeneity in size and shape of intermediate polytungstic species. Gelation is shown to involve polycondensation followed by a self-assembling process of polytungstic building blocks leading to sheets with a layered hexagonal structure. Single layers of this new metastable phase are composed of three-, four- and six-membered rings of WO₆ octahedra located in the same plane. This is the first time that a 2D oxide crystal is isolated and observed by direct atomic resolution. Further ageing and structural evolution leading to single sheets of 2D ReO₃-type structure is directly observed by HRTEM. Based on this atomic level imaging, a model for the formation of the oxide network structure involving a self-assembling process of tritungstic based polymeric chain is proposed. The presence of tritungstic groups and their packing in electrochromic WO₃ films made by different techniques is discussed.     

A silica fiber coated with a ZnO-graphene oxide nanocomposite with high specific surface for use in solid phase microextraction of the antiepileptic drugs diazepam and oxazepam

A novel ZnO-graphene oxide nanocomposite was prepared and is shown to be a viable coating on fused silica fibers for use in solid phase microextraction (SPME) of diazepam and oxazepam from urine, this followed by thermal desorption and gas chromatographic quantitation using a flame ionization detector. A central composite design was used to optimize extraction time, salt percentage, sample pH and desorption time. Limits of detection are 0.5 μg·L^?1 for diazepam and 1.0 μg·L^?1 for oxazepam. Repeatability and reproducibility for one fiber (n?=?4), expressed as the relative standard deviation at a concentration of 50 μg·L^?1, are 8.3 and 11.3% for diazepam, and 6.7 and 10.1% for oxazepam. The fiber-to-fiber reproducibility is <17.6%. The calibration plots are linear in the 5.0–1000 μg·L^?1 diazepam concentration range, and from 1.0–1000 μg·L^?1 in case of oxazepam. The fiber for SPME has high chemical and thermal stability (even at 280 °C) after 50 extractions, and does not suffer from a reduction in the sorption capacity.

Open image in new window

Graphical abstract A hydrothermal method was introduced for preparation of ZnO- GO nano composite on a fused silica fiber as solid phase microextraction with high mechanical, chemical stability and long service life

     

Significance of buoyancy and Lorentz forces on water-conveying iron(III) oxide and silver nanoparticles in a rectangular cavity mounted with two heated fins: heat transfer analysis

Journal of Thermal Analysis and Calorimetry - During the production of iron(iii) oxide and silver nanoparticles where water is inevitable, little is known on the transport phenomenon in a...